- decouple GL and main display initialization
- ensure that each "supported" display has its own FramebufferSurface
- onScreenAcquired/Released now takes a display
Change-Id: If34a05f3dea40f6c79db77f4dde283a2580daac4
The hints were being set a little too late, so the pre-rotation stuff
wasn't quite working.
Bug 7054997
Change-Id: Id8d5c626db7a76f768ba762a145b315878ee08e6
There are two different translations to apply in the logical
orientation, one before scaling and one after.
So translate, scale, translate then rotate.
Bug: 7139798
Change-Id: I0726991cadb62988390e77503dbbaed54f07bfe3
we now make sure to take the blanked state of a display into
account when we build its list of visible layers, this ensures
that we won't call prepare/set with a non-empty list when the
display is blanked.
Possibly fixes 7075380, 7103553, 7130187, 7016215
Bug: 7075380
Change-Id: I9fdd2e73d1b7621eaeca3d4ac2ae60d9fb1b3631
This adds a trivial workaround for a one-shot boot time crash, plus
an explicit check and abort for a failure condition that currently
presents as a less obvious failure.
Bug: 7145521, 7147557
Change-Id: I548f6a9caa9f0bd5710aaecea0e1c6c7c8f2f281
FramebufferSurface no longer speaks directly to the FB HAL. Now
everything goes through HWComposer (which may or may not be
connected to a hardware composer).
Added display index arg to some query methods.
Change-Id: Id3e157d2d4e3555d33afbb703e518b6e92e2d6d5
This change adds a compile-option to use eglWaitSyncANDROID to ensure that
texturing operations that access the current buffer of a SurfaceTexture do not
occur until the buffer is completely written. It also moves this
synchronization into a new SurfaceTexture method called doGLFenceWait and
changes SurfaceFlinger's Layer class to use that method rather than performing
its own wait on the fence.
Change-Id: I70afa88086ca7ff49a80e3cd03d423767db7cb88
onInitializeDisplays() was posting a transaction with changes
to the display projection. Unfortunately, it only set the
display orientation field and left viewport and frame
uninitialized.
The uninitialized values flowed downstream and found themselves
baked into a bogus DisplayDevice mGlobalTransform. That transform
was then applied to some Rects which were turned into Regions
that were them combined with other Regions.
Under certain situations, the uninitialized data might have
a largish value, resulting in the creation of Regions with
components in excess of the Region max-value limit of 0x7ffffff
(note that this is not INT_MAX). Later when performing a
binary operation using the Region, the Spanner would loop
indefinitely trying to figure out how to stuff a humongous
region inside of a max-value region. Not content to try
just once, the Spanner would continue trying again and
again, pegging the CPU and hanging surface flinger during boot.
Insanity soon followed.
Bug: 7130713
Change-Id: I0016f0c9662185be833474c212a1dd408096ae23
This change moves some common fence handling code into the base class for
BufferQueue consumer classes. It also makes the ConsumerBase class initialize
a buffer slot's fence with the acquire fence every time a buffer is acquired.
Change-Id: I0bd88bc269e919653b659bfb3ebfb04dd61692a0
the problem was that LayerBase::setPerFrameData() was always setting
this flag. in fact there was no reason to do this at that point since
the layer is initialized to a default state in setGeometry().
Bug: 7111259
Change-Id: Ib37b0dd7391a6163070e9aca025512159c1705f9
If SurfaceFlinger needs to refresh the screen but the dirty region is
empty, it won't set the layer acquire fences, and stale file
descriptors will be passed to HWC commit(). Now we make sure to clear
the stale file descriptors for each layer right after commit().
Bug: 7078301
Change-Id: I6953ff91fc5488f105b30b07306f9c45a4c3f780
- the library is dlopened from libsurfaceflinger
- the library built only when libnativehelper exists
Bug: 7089510
Change-Id: Ib3ea1029d7e8f6e055f4b759d0bf68f5123fa8a1
we used to have a visibleRegion object per layer, but now
it's per screen; so at somepoint the code got changed to
calculate the per-screen visible region on the stack and that's
what got passed to HWC.
we're now setting the visibleRegionScreen at each frame and
freeing at after the HWC set() call. We use the underlaying
SharedBuffer so that in most cases we don't have to allocate,
free or copy memory around.
Bug: 7089478
Change-Id: I24fa556c76613a225d9fe7a6c6b727bb476144d8
This change makes BufferQueue derive the min undequeued buffer count from a max
acquired buffer count that is set by the consumer. This value may be set at
any time that a producer is not connected to the BufferQueue rather than at
BufferQueue construction time.
Change-Id: Icf9f1d91ec612a079968ba0a4621deffe48f4e22
this would happen when the composition was handled
entirely in h/w composer, in this case, we would
not set the fences for any involved layers.
Bug: 7049373
Change-Id: I1439dc156ce23c24041cdfbbebfe8ff4fdf790f8
This change is a clean up of some of the handling of the maximum number of
buffers that are allowed at once. It mostly renames a few member variables and
methods, but it includes a couple small refactorings.
Change-Id: I9959310f563d09583548d4291e1050a7bbc7d87d
this happened because we didn't check that the visible
region was within the bounds of the display.
Bug: 7064121
Change-Id: I2e81850a3dc3d1474253520ad7f9e559c26d5a96
DisplayDevices are now keyed of the wp<IBinder> the client uses.
DisplayID has now become DisplayType which is just used to identify
physical displays (as opposed to virtual displays such as wifi displays).
Change-Id: I0c5968f2c902dcd699a7e0afacf833ff070c12ea
Use only display tokens in the API to refer to new displays.
Don't require the caller to specify the display when creating
a surface (since in general a surface could be shown on
any display).
This is intended to be a minimum change just to update the API.
Note that SurfaceFlinger still uses DisplayID in a few places
internally that might cause some features not to work properly
when there are multiple displays (LayerScreenshot, for example).
Change-Id: I3d91eec2da406eefd97bcd53655d403ad865a7e6
The primary display device was being configured to "blank" by
default, which prevented the boot animation from appearing
(unless you got lucky with the hardware composer state).
Bug 6975688
Change-Id: I0fa52e9e719c6e997c5725a7baf15d9718461b78
The primary display device was being configured to "blank" by
default, which prevented the boot animation from appearing
(unless you got lucky with the hardware composer state).
Bug 6975688
(This reverts an earlier revert.)
HWComposer can now create IDs representing a display
it can deal with. IDs MAIN and HDMI are reserved.
SurfaceFlinger associate HWComposer IDs with a
DisplayDevice and uses that when it talks to HWComposer.
A DisplayDevice doesn't have to have a HWComposer ID,
in that case it just can't use h/w composer composition.
Change-Id: Iec3d7ac92e0c22bf975052ae2847402f58bade71
- we now clean-up "dead" connection in the main loop,
this entirely avoid the problem with the side effects of
releasing strong references. We now only hold on to strong
reference for the connection we will signal.
- also simplify how we build the list of "ready" connections, by
only adding them to the list when we did receive a vsync event
Change-Id: I2a84da431320a2af8e8a93e07622a1d258236f43
The primary display device was being configured to "blank" by
default, which prevented the boot animation from appearing
(unless you got lucky with the hardware composer state).
Bug 6975688
Change-Id: Idaa0d0b98ebb331a17d1b16774c6b05bfa1e8728
- one issues caused most timestamps to be reported as 0
- on rare occasions an uninitialized variable could be used
- vsync counts per connection were accessed unthreadsafely
we now have 2 lists of connections in the main loop, one just
keeps a list of strong refs to the connections because once
we have a strong ref we're not allowed to release it while
holding the lock.
the 2nd list holds the connections that have a vsync event to
be reported. all the calculations are made with the lock held.
Change-Id: Iacfad3745b05df79d9ece3719bd4c34ddbfd5b83
problem was that we were acquiring a strong reference
on Connection object with a lock held, when those
got out of scope (lock still held) their dtor
could be called if all other refs had dropped,
the dtor would acquire the lock again to
remove the Connection from the main list. boom.
we rearange the code so this doesn't happen.
Bug: 6942208
Change-Id: I0a0ebabce2842d29d60d645b64aac2f26640e59b
when multiple displays are connected, we ended-up having to
call eglMakeCurrent() twice per display due to a limitation
in EGL. this fixes that.
Change-Id: I11e4584df50f8c24bbecee74e37b28b3ee031d2f
fix a few bugs with external displays
- HWComposer doesn't really handle multiple displays yet
so there is a lot of ugliness there
- We also need to make sure that external displays are not
blanked by default
- due to some EGL limitations surfaces being swapped need
to be current
Change-Id: I82bff05b43bcebd8da863c7c76b4edbc3bc223a9
due to a typo, SF's main transaction was conditional to having a
display transaction.
more correct fix for 6970310
Bug: 6970310
Change-Id: Iafd8c4e02afa5db829cc1c65950cfcc74754c6af
Layers were not properly being removed because we were
setting the wrong transaction type flag at the time of
removal.
When layers are removed, we must use eDisplayTransactionNeeded,
not eTransactionNeeded, to ensure that the mLayersRemoved
flag is checked and the appropriate cleanup occurs.
Bug: 6970310
Change-Id: Id4b2897a34d4ac00aa0f92349c0ec6db95c1aaf7
- displays are represented by a binder on the client side
- c++ clients can now create and modify displays
Change-Id: I203ea5b4beae0819d742ec5171c27568f4e8354b
once a secure window is put on screen the display
would retain its "secure" flag forever, preventing
screenshots from being taken.
Bug: 6933967
Change-Id: I5be8355145ca7d580d84552311642f8fa912fe6a
- also replace C casts with C++ casts
- only the interface is changed, HWComposer still doesn't
fully handle multiple displays
Change-Id: I48eb89bff2edb76bf1d4d41f46802b9b2a7166a8
This change refactors the FramebufferSurface class to inherit from the new
ConsumerBase class.
Bug: 6620200
Change-Id: I46ec942ddb019658e3c5e79465548b171b2261f2
it's safer this way because this object owns an
EGLSurface which cannot be easily reference-counted.
it also gives us the ability to sub-class it, which
we might want to do soon.
Change-Id: I07358bb052dc5a13b4f2196b2c2b6e6e94c4bb4f
- fix typo drawForSreenshot misspelled
- get rid of DisplayDeviceBase
- removed unused or unneeded code
- always pass a DisplayDevice to Layer methods that are called
on a per-display basis (to make it clear that this could be
called more than once per composition).
Change-Id: Id948b7e09fe5c06db0e42d40d6ed75dd095c7f44
Commit 8630320 moved the eglSwapBuffers fallback (for devices with no
HWC implementation) from DisplayHardware to HWComposer. But HWComposer
only knows about the framebuffer EGL display and surface handles if
there is a HWC, so it was always passing bogus handles.
This change moves the eglSwapBuffers fallback up to SurfaceFlinger,
which has access to the framebuffer EGL handles.
Bug: 6886613
Change-Id: Iad3f5ff7c90ee48d7053999e6a4548d6794b6ebd
we will only ever have a single instance of HWComposer, so
it's now an attribute of SurfaceFlinger, instead of being part
of DisplayHardware.
DisplayHardware now just represents a "display" (it should be renamed).
Change-Id: Iec191e57686868e1df6daa8b880a286c9fefde56
this attribute can be set through a regular transaction using
SurfaceComposerClient (just like any other attribute, eg: position or size)
Change-Id: I701a47c677ea6442ca713728a93335328cd2b172
no change of functionality -- the old behavior is implemented
on top of this new protocol.
this new protocol will allow, eventually, to pass informations
about displays and layer stacks.
Change-Id: Ic6c2295e61ec8ecbc8ce01ab7664e35d928202fc
mostly refactored SurfaceFlinger.h, but also removed dead code.
cleaned-up a few includes as well.
Change-Id: Ib15f4ffe567912b61ee98aa076c6a283b72811b5
Call into the new HWC blank operation to blank or unblank the screen.
Legacy systems may have already blanked the screen via early suspend,
and can choose to not implement the blank operation in their hardware
composer implementation.
Change-Id: Ib403c8c0e36367a2cfef3e1d124872fcfeb9e7cb
- remove dependency on cached state in validateVisibility
- get rid of mVertices and mTransformedBounds
- get rid of validateVisibility
- get rid of unlockPageFlip
- handleTransaction now returns a dirty region
- computevisibileregion now uses window-manager space
both API and implementation will change, this is just a prototype
intended to show feasability.
SurfaceFlinger is passed an ISurfaceTexture through a new
callback, it is in turn used to create an EGLSurface which
surfaceflinger will draw into in addition to the main screen.
Change-Id: Id0bbb0b854bb7bae44d57246a90b65d4567f9a21
After a HWC set, each SurfaceFlinger Layer retrieves the release fence
HWC returned and gives it to the layer's SurfaceTexture. The
SurfaceTexture accumulates the fences into a merged fence until the
next updateTexImage, then passes the merged fence to the BufferQueue
in releaseBuffer.
In a follow-on change, BufferQueue will return the fence along with
the buffer slot in dequeueBuffer. For now, dequeueBuffer waits for the
fence to signal before returning.
The releaseFence default value for BufferQueue::releaseBuffer() is
temporary to avoid transient build breaks with a multi-project
checkin. It'll disappear in the next change.
Change-Id: Iaa9a0d5775235585d9cbf453d3a64623d08013d9
The desc.txt file can now mark parts as 'must finish cleanly' by using
'c' as the part line prefix rather than 'p'. If so indicated, if the
bootanimation is asked to quit it will do so only after waiting to
finish that part.
I considered either making init.c service killing smarter or promoting
bootanim to be a bindable service with a requestExit method. However,
these changes are probably too big/risky given our ship date. So
I used a property as a mailbox between SurfaceFlinger and bootanim.
Bug: 6679877
Change-Id: Id7dca22caa50b450fff25ca94f7242d971034f41
When turning the screen off we could have 2 waiters on the
vsync condition: The main vsync waiter as well as one in
onScreenReleased(). We were only signaling the condition though,
so it it would be possible to wake onScreenReleased() without waking
the main vsync thread which would then be stuck in .wait().
We fix this by just using broadcast() when receiving a vsync event.
We also add a broadcast() to signal when the state of
mUseSoftwareVSync changes. This is important particularly for
the transition from hardware to software vsync because the main
vsync waiter might have observed mUseSoftwareVSync == false
and decided to block indefinitely pending a hardware vsync
signal that will never arrive.
Removed a potentially deadlocking wait for a signal in
onScreenReleased(). The function was trying to wait for the last
vsync event from the hardware to be delivered to clients but there
was no guarantee that another thread would signal it to wake up
again afterwards. (As far as I can tell, the only other other
thread that might wake it up at this point would be a client
application issuing a vsync request.) We don't really need to wait
here anyhow. It's enough to set the mUseSoftwareVSync flag,
wake up the thread loop and go. If there was a pending vsync
timestamp from the hardware, then the thread loop will grab
it and use it then start software vsync on the next iteration.
Bug: 6672102
Change-Id: I7c6abc23bb021d1dfc94f101bd3ce18e3a81a73e
The acquire and release fences aren't yet used; this is just support
for the new version and temporary backwards compatibility for older
versions.
Change-Id: Ia5ccc05a97c86f649042b9a35e11042fa0187e84
HWComposer must abstract the HWC HAL entirely, so that the
HAL can continue to evolve (and break binary compatibility)
without breaking SurfaceFlinger. The HWC data structure had
leaked outside of HWComposer, this is now fixed.
We now have an abstract interface that provide all the
needed functionality, HWCompose provides concrete
implementations of it based on the the HWC version.
Change-Id: I40c4676dc986b682ede5520a1c60efe64037b0bb
SF now has its own implementation of ANW for the
framebuffer and it uses BufferQueue. FramebufferNativeWindow
is now only used by stand-alone apps.
Change-Id: Iddeb24087df62bd92b0f78e391dda9b97ddc859c
this would happen when a resize was pending (ie: we have received
and processed a resize transaction but have not received a buffer
with the right size) and a new transaction came in that didn't
involve a resize, for instance a translate-only transaction.
in this case, we would incorrectly update the drawing state
with the pending size, eventhough we still don't have a buffer
for it.
the solution is quite simple, we never allow the size to propagate
from current to drawing state during the regular transaction processing
(unless we are in fixed-size mode -- meaning we don't need to have
a matching size buffer), this propagation happens later once we
receive the buffer.
Bug: 6624163
Change-Id: I11a97e4b88a7f3a0571ddcfe99c86cb04ce01a4d
SurfaceFlinger will no longer directly synchronize with early suspend.
Instead, PowerManagerService will synchronize with SurfaceFlinger to
ensure that a black frame has been drawn on the display, and then
trigger all early suspend handlers.
Change-Id: I07acdd628440d23fdb69db94319ec5d65d3f4919
this would happen when a window started with size A, was
resized to B and immediately resized to A. In this situation
the erquested and active size would be the same, and SF
would think a transaction wasn't needed.
we fix this by always comparing the requested sizes.
Also, make sure to set mRefreshPending once we're sure
we have succesfully called updateTexImage().
Bug: 6580962
Change-Id: I2c48b4df7f05fd35c9e1d2dd82095b0f3d5a0b6a
this bug introduced recently would happen when the very first
buffer of a surface was rejected for not having the right size
Bug: 6577035
Change-Id: I9fabf20006019f2a6c308be7c7f5c05bdcfd5014
SurfaceFlinger is using this new feature to reject buffers that
don't have the right size.
Bug: 6498869
Change-Id: I8a7250a47db6c082a357b703feb3b9d0fc8d3443
here we just shuffle a bit the code inside lockPageFlip(),
we move the code that handles the buffer size closer to the call
to updateTexImage(). no functionality change.
Change-Id: Ie3193cd86cd32cf3c89532449fd747d145ca0ab6
use a flag instead of pre-committing the "requested" state
to prevent propagation or "requested" to "active", which makes
things a lot clearer when reading the code.
also avoid going through the "resized" code-path when requested
size is equal to "active" size.
Bug: 6498869
Change-Id: I24f893ba0ec5ca06aac5b8da9818989ae7ce4005
The crop is now handled like a resize, it's latched only when we
receive a new buffer in the case we have a resize in the same
transaction.
Bug: 6498869
Change-Id: I9f3cbbe08fb19443899461ec441c714748a4fd1a
This change removes some visible region recomputation that was needed to handle
the SCALING_MODE_FREEZE cropping. We've changed things to use a window crop
from the WindowManager instead, so this is no longer needed.
Bug: 6299171
Change-Id: I32fbc2b689c985837126d8ba3d9a91e79613ffbf
This change adds a crop rectangle specified in window coordinates to the layer
state. The all window pixels outside this crop rectangle are treated as though
they were fully transparent. This change also adds the plumbing necessary for
WindowManager to set that crop.
Change-Id: I582bc445dc8c97d4c943d4db8d582a6ef5a66081
This change makes a change in the crop, scaling mode, transform, or buffer
dimensions trigger a recomputation of the visible regions of a window. With
the new cropping behavior for SCALING_MODE_FREEZE all of these can now affect
the visible region.
Bug: 6470541
Change-Id: I1904e47efbd708e28bf189f637d24dbef65cd41e
This change adss support for applying a buffer crop to layers with the
SCALING_MODE_FREEZE scaling mode. These layers do not scale the image, but
rather treat all pixels outside the crop rectangle as fully transparent.
Change-Id: I762518e56a37aef7747f9b581df2f2589b232c49
Bug: 6299171
This change makes SurfaceFlinger set the filtering-enable on each layer's
SurfaceTexture before querying the texture matrix to use for GLES composition.
Change-Id: I40c3defd73ebf96e3cabb3bfdb1fc97f2036753a
indeed, connect and queueBuffer return the same data, so it's
easier to have them use the same protocol.
Change-Id: I4f9fa3be0a80c9ab0a7a4039b282ae843aab02e1
this seems to hurt performance on some GPU. this change
might negatively affect performance on other GPUs though, but
probably in less time-sensitive cases. If this becomes a
problem it might become necessary to pre-clip the geometry
(so that we don't have to use glScissor).
This improves the rotation animation quite a bit.
Change-Id: I5dbe1286f7ad858ef2c1e1ad9a07ee3f26c0b1f3
this optimization didn't improve performance and in fact
seemed to hurt more than anything else. it also made
things a lot more complex as it introduced edges cases
when switching to/from h/w composer.
Change-Id: Iaafc235e175f5740cd98bff914d706e02ab88bb8
surfaceflinger will now handle each surface post
as soon as possible and handle the composition
itself at VSYNC time as usual.
Change-Id: I6b1ae33fd56062d86e5419ebab8def0ca5803fbf
this prevents the GPU from running when composition
is fully handled by overlays. this should improve
animations a bit.
Change-Id: If4ae584b7a3976e6bdd36e318686ac3940b6b075
pdk builds don't have libandroid.so available. Remove it from
projects that aren't actually using it.
Change-Id: I100dc84aaf8160c1062a122ef6d5aec0534d73fa
this could happen after an orientation change. basically
we need to triger a geometry-changed when the very first buffer
is received
Change-Id: I097e411fd6612c18725737cffccdbf6b2af3511c
re-add support for pixelformats L_8, LA_88 and RGB_332 in libui
for backward compatibility.
This may or may not fix 6058926
Bug: 6049685
Change-Id: Ic1b8b4cc994522f7fe664da64c0ef76b98bc6d53
Most of these tests in this directory don't currently build,
but test-surface did build incorrectly by bad luck, using the old API.
test-resize still doesn't build, but when the other build errors
are fixed then it will use the right API.
Change-Id: I388d6d59fe0a2328f352214dcdc28839a24043f0
SF could end-up in an infinite crash-loop during startup if it
was stopped while the screen was off. This happened because
the thread that manages screen blanking was started before
other important pieces of SF were initialized.
Change-Id: I0dded11dbf2395fdd57b673859a7aa0fa9eb32b6
we're seeing UI freezes when window updates and
composition are separated. for now we workaround this
by always doing a composition after window updates on
vsync. triple buffering is reenabled for performance.
Change-Id: I693d705000b7452489bb0b4918fbeadb9879315c
In some situations SF would mark a window as "has a pending update"
but would never process that update because the window is not
visible (fully transparent, hidden by another window, etc...), this
window would then be "stuck" until some other window updated.
Change-Id: Ifa18a9aef3a53f2593b473556702688ae62d9503
recent changes in SF introduced a hang where some windows would
stop being refreshed.
This is an attemp to fix that.
Change-Id: I6aa32ac0d6f1c0a6aea8f6195825dc4f4e6f93f9
we now exit the Display thread on any error happening on these files.
also refactor the code and remove a lot of unused stuff.
Change-Id: I8d080c35b211890ca20ae09fa36fbdccdf5669a8
with this changes, SF transactions are handled as soon as possible
but do not trigger updates. the update is delayed until the next
vsync.
this allows us to work much better without requiring triple-buffering.
Change-Id: I1fa10794d0cf742129f0877698b7b1e1f2ec7401
vsync events were sometimes delivered to connected
client who didn't request them. this happened if
another client requested the delivery and that client
was first in the client list.
also fix the vsync test which didn't request any events as
well as DisplayEventReveiver documentation which was misleading
about the necessity to request vsync events.
Change-Id: Ie990fda3f337f8f0042745c4b2cde67936c45686
--latency-clear [name]
clears the latency data for the specified layer or for
all layers if none is specified
--list
prints the list of all layers regardless of their visibility
Change-Id: I7c07ae020f838c173b98ee50f3fb3e93da78acbb
It is now possible to say:
dumpsys SurfaceFlinger --latency
to print latency information about all windows
dumpsys SurfaceFlinger --latency window-name
to print the latency stats of the specified window
for instance: dumpsys SurfaceFlinger --latency SurfaceView
The data consists of one line containing global stats, followed by
128 lines of tab separated timestamps in nanosecond.
The first line currently contains the refresh period in nanosecond.
Each 128 following line contains 3 timestamps, of respectively
the app draw time, the vsync timestamp just prior the call to set and
the timestamp of the call to set.
Change-Id: Ib6b6da1d7e2e6ba49c282bdbc0b56a7dc203343a
Some implementations of NPOT, particular those derived from core
GLES2, require the wrap mode to be CLAMP_TO_EDGE. Set the required
wrap mode for the screenshot texture so it passes the completeness
check.
Change-Id: I735016123e4acaf54b40d1435bd70281cef88a31
Several source files privately defined macros LIKELY and UNLIKELY in terms
of __builtin_expect. But <cutils/compiler.h> already has CC_LIKELY and
CC_UNLIKELY which are intended for this purpose. So rename the private
uses to use the standard names.
In addition, AudioFlinger was relying on the macro expanding to extra ( ).
Change-Id: I2494e087a0c0cac0ac998335f5e9c8ad02955873
- add the ability to set the vsync delivery rate, when the rate is
set to N>1 (ie: receive every N vsync), SF process' is woken up for
all of vsync, but clients only see the every N events.
- add the concept of one-shot vsync events, with a call-back
to request the next one. currently the call-back is a binder IPC.
Change-Id: I09f71df0b0ba0d88ed997645e2e2497d553c9a1b
the deadlock would happen when the pipe became invalid and SF
trying to remove the connection from its list.
we know make sure to process events without holding a lock.
Change-Id: I39927ed8824fc7811e16db3c7608a2ebc72d9642
Layer::lockPageFlip() and layer::onRemove() could be called on
different threads and race such that lockPageFlip() successfully
called mSurfaceTexture->updateTexImage() but then gets NULL back from
mSurfaceTexture->getCurrentBuffer(), leading to a crash.
This change moves Layer::onRemove() calls to
SurfaceFlinger::commitTransaction() so they happen after the Layer is
done being drawn from and only happen on the main surfaceflinger
thread.
Change-Id: I4b550caadff4cc1878d7c3bca6129193fb0c713e
This change adds a compile-time option for SurfaceTexture to use the
EGL_KHR_fence_sync extension to synchronize access to Gralloc buffers.
Bug: 5122031
Change-Id: I7e973a358631fff5308acf377581b811911fe790
use gui/DisplayEvent to receive the events. Events are
dispatched through a unix pipe, so the API is compatible
with utils/Looper. see gui/DisplayEvent.h for more info.
Bug: 1475048
Change-Id: Ia720f64d1b950328b47b22c6a86042e481d35f09
Revert "Add support for sending VSYNC events to the framework"
This reverts commit f3918c5bd4bc9f02f74da42995564150ca2dd382.
Change-Id: I998e3e1aa3fa310829ae973b64fe11b01f6f468f
* changes:
Add support for sending VSYNC events to the framework
BitTube::read now handles EAGAIN
split ComposerService out of SurfaceComposerClient.h
rewrite SF's message loop on top of Looper
use gui/DisplayEvent to receive the events. Events are
dispatched through a unix pipe, so the API is compatible
with utils/Looper. see gui/DisplayEvent.h for more info.
Bug: 1475048
Change-Id: If4126023fc9c067e56087ec7d16a8fd542ce1794
- don't advertise extensions that are not supported
by any implementation
- remove EGL_ANDROID_swap_rectangle which is not
implemented by anybody and confuses people
- add some comments about mandatory extensions
Bug: 5428001
Change-Id: Id8dc48116ac1d1eb79ec9ef55d03e29d4257c1f3
This fixes the issue:
"Call not sent" dialog takes too long to dismiss after hitting OK"
Note: the system would recover after a 5 second timeout.
Bug: 5534520
Change-Id: Ifa37e594b50581f498479a5858672441b3d7dd87
