The debugging and tracing levels are initialized both during
early_egl_init and egl_display_t::initialize(). For apps this has
no effect since early_egl_init is called in the context of zygote.
This CL removes the unnecessary call from early_egl_init.
Change-Id: Ibc55c26228cd197f2e2623fbfb2d1a63d0722401
This change adds a new extension for EGL implementations to indicate the
EGLConfigs that support use as a HWComposer framebuffer target layer.
Change-Id: Ia7c8fbe8da09d57b4ec8bf1d9ddb67ca21aa2885
This change fixes a bug where initializing EGL multiple times (eglTerminate
followed by eglInitialize) would cause extensions to show up in the extension
string multiple times.
Change-Id: I707a3da62ed30ef13835087167f84a08bc6addd7
This change adds support for the EGL_ANDROID_native_fence_sync extension to the
Android EGL layer. It also fixes a couple minor issues with the extension spec.
Change-Id: Ic8829d21f37b701f33aa9c72c3d25e88e03fa3cd
This change updates the extension spec to refer to generic "native fence sync
objects" rather than "Android fence sync objects."
Change-Id: I15a79f08571586431845b54c58c8420b652f40ef
eglGetRenderBufferANDROID was removed as it had no users. This commit
reintroduces this extensions as it's used by Qualcomm graphics HAL.
Change-Id: I493306830a0d4f8722a42bcc84fb49236afdabeb
Certain apps (e.g. chrome) seem to create contexts which are unused
for long periods of time. If tracing is stopped before those contexts
are used, then the debugger never gets to know that these contexts
were created. Flushing the trace after these calls ensures that
the debugger knows about all created/used contexts.
Change-Id: I01baa11aa56ac89eddce3c2851e4bf01076984d1
This fixes the glgen code generation for methods
which have a buffer arg that can be NULL.
Bug: 6845189
Change-Id: I5fb745b806601e5665f97bfd15fd865cd9c241ed
- Process is killed by system with SIGBUS signal if it writes
data to mapped sparse file on full filesystem.
- Allocate space using write() function instead of ftruncate()
to avoid creation of sparse files on full filesystem.
Catch write() errors to handle out-of-space case during allocation.
Bug: http://code.google.com/p/android/issues/detail?id=35376
Change-Id: Ifc366454f34e71a43a0973eda4f591a920ea3a14
Signed-off-by: Kirill Artamonov <kartamonov@nvidia.com>
this adds correct versions of the broken GLES20 methods
glGetShaderSource, glGetActiveAttrib and glGetActiveUniform.
the old broken methods are still there and need to be @hide later.
Bug: 6006380
Change-Id: Ide74242ada54b85459b459ae4f20cd26a23c7610
This changes generation of the OpenGL bindings to prevent
crashes of methods with more then one nio buffer argument.
Bug: 6772416
Change-Id: I4eff25c2f568dea78a6ffd3e95ff4620ab4b3b7d
This fixes lighting when using point lights, when eye space
lighting is used (which is the default).
Change-Id: I0cd0d2329893d6b5f8af3b1e595274c2076fc322
This change updates the uses of ANativeWindow to use the new ANW functions that
accept and return Sync HAL fence file descriptors.
Change-Id: I3ca648b6ac33f7360e86754f924aa072f95242f6
The acquire and release fences aren't yet used; this is just support
for the new version and temporary backwards compatibility for older
versions.
Change-Id: Ia5ccc05a97c86f649042b9a35e11042fa0187e84
this allows us to enable h/w acceleration on low-end
devices while keeping memory usage down.
Bug: 6557760
Change-Id: I8af2de3038dc2579360b8b73aa452cb7a0e506a9
Implementing this in libagl allows us to start using it for
SurfaceTexture in emulator builds, which is necessary to avoid
corruption in the Browser when using the host-accelerated GL path.
Bug: 6515813
Change-Id: Icafba8687cb5d010d8d42b3866b298d2be984fc9
Currently, gltrace offers very few trace collection options. As a
result, these options are encoded in a single integer. The trace
control task simply receives integers and interprets them as
commands.
This patch changes the control protocol to first receive the
command length followed by the actual command itself. This allows
for future flexibility to provide enable other commands.
Change-Id: Id5f56c80a025bbbe7613ab4457e092732e7d9dc9
Hibernating EGL takes a long time (>100 ms) and blocks all other
rendering. During window animations, the outgoing activity begins
hibernation before the animation stops, causing visible stutter.
Hibernation is still available by setting 'BOARD_ALLOW_EGL_HIBERNATION
:= true' in the devices BoardConfig.mk
Change-Id: Iab4e00723a1adcd97481e81b2efdc821b3e9712f
When eglTerminate() is called with a window surface still exists, a
deadlock would occur since egl_display_t::terminate() holds a lock
while destroying the window surface, which calls
onWindowSurfaceDestroyed() which attempts to take the same lock.
This change refactors the hibernation code and data into a separate
object with its own lock, separate from the egl_display_t lock. This
avoids the deadlock and better encapsulates the hibernation logic.
The change also fixes a bug discovered incidentally while debugging:
hibernating after calling eglTerminate() succeeds, but will cause
awakens from subsequent eglInitialize() to fail. We will no longer
hibernate a terminated display.
Change-Id: If55e5bb603d4f8953babc439ffc8d8a60af103d9
This tests if eglTerminate can succeed while objects
are leaked. Currently the test fails because of a deadlock.
Change-Id: Ibe26edfda28691284d0674e803e8d3114f3ce4c6
If the EGL implementation supports the EGL_IMG_hibernate_process
extension, use it to hibernate (and hopefully release memory or other
resources) when the process isn't actively using EGL or OpenGL ES. The
idleness heuristic used in this change is:
(a) Wake up when entering any EGL API call, and remain awake for the
duration of the call.
(b) Do not hibernate when any window surface exists; this means the
application is very likely in the foreground.
(c) Do not hibernate while any context is made current to a thread.
The app may be using a client API without the EGL layer knowing,
so it is not safe to hibernate.
(d) Only check these conditions and attempt to hibernate after a
window surface is destroyed or a thread's context is detached. By
not attempting to hibernate at the end of every EGL call, we avoid
some transient wakeups/hibernate cycles when the app is mostly idle,
or is starting to become active but hasn't created its window
surface yet.
On a Galaxy Nexus, hibernating frees 1567 VM pages from the process.
Both hibernating and waking can take anywhere from 30ms to over 100ms
-- measurements have been very inconsistent.
Change-Id: Ib555f5d9d069aefccca06e8173a89625b5f32d7e
This is in preparation for a change that will hibernate the underlying
EGL when idle. Instead of a bare egl_display_t*, get_display() now
returns a egl_display_ptr, which acts like a smart pointer. The
"wakecount" counter managed by the smart pointer isn't used for
anything in this change. It will be used to make sure we don't
hibernate when any thread is in an EGL call, without having to hold a
mutex for the duration of the call.
Change-Id: Iee52f3549a51162efc3800e1195d3f76bba2f2ce
This change adds a debug option to EGL to use an EGLSyncKHR each frame to
determine when the GPU finishes rendering the frame.
Change-Id: I09ce071db904b44f07ca814c586c291c8b59385a
Some of the tests in frameworks/native/opengl/tests depend on java
or jni, and shouldn't be in frameworks/native. Prevent them from
building in pdk builds for now.
Change-Id: Ie7a012513dd03992ac1f093bd245aeca826c9cb9
This patch adds a function setGlDebugLevel() to libEGL to enable
GL tracing. This will be used by the Java layer to add an option
to "am start" that can enable tracing for a particular application.
Change-Id: Ie1dbdd550f502df8633553595cb33ee9d9ae44e1
This patch enables tracing of vertex attribute data that
is specified using glVertexAttribPointer().
At the time the glVertexAttribPointer() call is made, we
only receive a pointer in client space, without any indication
of the size (# of attributes). This size is known only at
the time of the glDraw() call.
This patch generates a new message glVertexAttribPointerData()
when a draw call is issued that contains the vertex attribute
data.
A glDrawArrays() call directly gives the size of data to copy.
A glDrawElements() call gives the indices to copy. In such a
case, all data between the min & max indices drawn are copied
and sent to the host. To support glDrawElements() with an
element array buffer, this patch also adds state that maintains
a copy of all element array buffers.
Change-Id: I434da794a0aa9ada8e7474e219ffb1d79b183ecf
Currently, the trace API passes the pointers that need to be
patched up via 32 bit integers. Such code will not be 64 bit safe.
This patch sends all pointers in a separate array of pointers
for the fixup calls to read from.
Change-Id: If975333f11a6f6f9a74fba57de328affaed452a5
this simplify our EGL wrapper implementation a lot.
This wrapping is no longer needed now that we can only
support a single underlaying EGL implementation.
Change-Id: I8213df7ac69daac447f1fe6e37044b78aac4e9a9
This patch updates the trace information for all glUniform*() calls
to have the right data (the actual uniforms that are passed).
In addition, as soon as a program is linked, information regarding
all the active attributes and uniforms is passed on to the debugger.
Change-Id: Icfbc6722789b42c413a845cf546577fa6de7da2b
this is possible now that we support only a single
EGL implementation. this allows a large code simplification.
Change-Id: I7a6b9db4c5d60f4407c6061e7a68729af63d5242
from now on, the system can only have one EGL
implementation. this means the software and h/w renderer
cannot be used at the same time on a device. Of course, the
h/w renderer is always prefered; in its absence we
default to the software renderer.
Change-Id: Ib579f58055dd0ce4c4a99144131efa11c16ca3d3
this was introduced in a recent change. eglMakeCurrent can
end up calling eglDestroyImageKHR via ANativewWindow::disconnect
when the consumer is in the same process.
we make sure we don't hold the lock while this is happening.
Change-Id: Id17fe4fd76eecf5f962cefb9aa32be41fc1b042d
it would happen when a context was made non-current, in this
case we would call the implementation's eglMakeCurrent() which
would succeed, if we're rescheduled at that point, another
eglMakeCurrent() could make that context current to another thread,
however, when we came back to the original call we would
overwrite egl_context_t internal state.
this is fixed by moving the critical section under
egl_display_t's lock.
Change-Id: I743c85696e13263d3a9570824940263df0caacdc
when increasing MAX_NUMBER_OF_GL_EXTENSIONS to 256
we also needed to create all the corresponding wrappers.
Change-Id: I90edaaf0885ccdfab48e7a1396bcf88e039cfb25
This extension is always added to the GL_EXTENSIONS
extension string for the current GL context, regardless
of if it's supported by the h/w driver.
The extension itself will be handled by GLES_trace (eventually),
when GLES_trace is not enabled, it'll result to a no-op.
If the h/w implementation has this extension, we'll call that version
instead of our dummy version.
Change-Id: Ie5dd3387c4d45cd5ed5f03b73bda6045620a96bc
Export trace information via abstract Unix Domain Socket (UDS).
This allows tracing of applications without INTERNET permission,
and should be faster as well.
Change-Id: Iabb67fcc2bc2484afd8128af07dca723b81c52c6
Currently users do not have control over the amount of data
captured during tracing. This patch adds 3 settings that users
can enable/disable at runtime:
- capture framebuffer on eglSwap() calls
- capture framebuffer on glDraw*() calls
- capture texture data passed to glTexImage*() calls
Disabling these options when not needed signficantly decreases
the size of the trace file, and reduces performance overhead for
the running application.
These settings are stored in the per process GLTraceState.
A separate thread listens for commands from the host, and updates
the state based on the user commands.
Change-Id: Ic4518b94e8bcbc5330ac7138153721caa98b365d
This patch adds two improvements:
1. Protobuf messages are buffered and sent in chunks.
2. Multiple EGL contexts are handled properly: Corresponding
to each EGLContext, a GLTraceContext with a unique ID is created.
On eglMakeCurrent, the appropriate GLTraceContext is set and is
used while tracing subsequent GL Calls in that thread.
Change-Id: I34076376d3e5af205c87c7396ea47659844abd6e
Currently, gltrace always attaches the contents of the currently
bound framebuffer. This patch changes it to attach the contents
of FB0 on eglSwap, and the currently bound framebuffer for the
glDraw* calls.
Change-Id: Ice0520d45d75638fe61cd91149df773074216510
Currently, the contents of the FrameBuffer are sent by encoding
them as the last argument to the function call. As a result, it is
not possible to know if a message has the framebuffer encoded in it
without looking at the function type.
This patch modifies the protobuf definition to include a separate
optional framebuffer message.
Change-Id: Ief3a6950052d927ca0743e729457435b48c25a92
This patch provides a framework for tracing GLES 1.0 and 2.0
functions. It is missing a lot of features, but here are the
things it accomplishes:
- Stop building the glesv2dbg library, and build the
glestrace library instead.
- Replace the hooks for glesv2dbg with the ones for glestrace.
- Add the basics for the trace library. Currently, this
traces all GL functions, but not all required data is
sent for all the functions. As a result, it will not
be possible to reconstruct the entire GL state on the
host side.
The files gltrace.pb.* and gltrace_api.* are both generated
using the tools/genapi.py script.
Change-Id: Id60a468f7278657f008bc6ea1df01f9bdfecfdd3
This change explicitly sets swap interval 1 on the window when an
EGLSurface is created to render to it.
Change-Id: I91eb29dbee3ae4a55076b921f084d503fbe94e03
This change introduces two new BoardConfig variables to control the size
limits of the EGL blob cache. MAX_EGL_CACHE_ENTRY_SIZE is the size
limit for values inserted into the cache, and MAX_EGL_CACHE_SIZE is the
size limit for all entries in the entire cache (including both keys and
values). If either of these BoardConfig variables are not defined then
a default size limit is used instead.
Change-Id: I6703d93f966b6389c6499f23d841e42339f9c9d7
This change adds Java definitions for the enums of the
GL_OES_EGL_image_external OpenGL ES extension.
Bug: 3482193
Change-Id: Ib50326f8be9b9cc9021753855c3846ddcdc5eaa2
- don't advertise extensions that are not supported
by any implementation
- remove EGL_ANDROID_swap_rectangle which is not
implemented by anybody and confuses people
- add some comments about mandatory extensions
Bug: 5428001
Change-Id: Id8dc48116ac1d1eb79ec9ef55d03e29d4257c1f3
the code that validated EGL objects dereferenced the object
to access its EGLDisplay -- needed for validation (!).
This was wrong for two reasons, first we dereferenced the object
before validating it (potentially leading to a crash), secondly
we didn't validate that the object existed in the right EGLDisplay.
We now use the EGLDisplay passed by the user API.
Change-Id: I66f9e851d4f8507892a6b1fee3065f124c4e7138
This change adds the ANDROID suffix to the all the types and functions
defined by the EGL_ANDROID_blob_cache extension.
Change-Id: I087875b96d9a7053efb9c8d5614f9f765eed799d
This does not happen on high end gfx devices. This happens
only if only one EGL context is initialized in the current
process.
Change-Id: Ibd1737efdf84eef8a84108b05795440d1ae9964e
This change causes any insertions into the EGL cache to trigger an
attempt to save the cache contents to disk. The save operation is
deferred to allow multiple cache insertions to be batched up.
Change-Id: I6cfec9c0dbbef94d3f8880860e2a365dccc296c7
This change adds support for saving and loading the contents of the EGL
cache. It also adds some simple tests for the EGL cache.
Change-Id: I18e5e789e0897a0783d29d1c1e64d26de2dd44c4
This change makes the makes the stub EGL_ANDROID_blob_cache callbacks
actually use a BlobCache object.
Bug: 5474671
Change-Id: I5cbaae2dea3aad2fe306c9f57029c3f215a0863a
This change adds a stub cache implementation that gets passed to the
underlying EGL implementation at initialization time.
Change-Id: I14437c5b6f91b7a34a19bb02ad802e6e54f88d2a
always use GL_RGBA, GL_UNSIGNED_BYTE for screen capture
and make sure to handle GL_BGRA_EXT used on some gpu.
Change-Id: If9c973677fec8a5c4e72be22e7ef7d4bf5f008f4
This patch modifies the library loaded in libEGL.so to
handle the case of GLES emulation as follows:
- if we detect that we run inside the emulator, check the
GPU emulation status through ro.kernel.qemu.gles, which
will be set to 1 if supported, or 0 otherwise.
When trying to run on an older version of the emulator,
the kernel parameter will not be defined at all.
- if GPU emulation is supported, use egl.cfg as usual.
It will contain a line like "0 0 emulation" that will
load libEGL_android.so appropriately.
- nothing is changed if we don't run inside the emulator.
NOTE: Ideally, we would modify libEGL_emulation.so to
redirect all calls to libEGL_android.so in this case.
However, this turns out to be extremely tedious to implement
(too many functions with different signatures).
As such, it is much simpler to make the check before
loading the library.
Change-Id: I9930bc168d9013cc8700feedc57b979384467c37
This change moves the call to native_window_api_disconnect from
eglDestroySurface to the egl_surface_t destructor. The egl_surface_t
can outlive the external EGLSurface if eglDestroySurface is called while
the surface is made current on a thread.
Change-Id: I0df6117a5633c2a19935fe356579abdd76fc471f
the original connect/disconnect hooks are deprecated
and replace by api_connect/api_disconnect. the original
hooks are no no-ops.
api_connect/api_disconnect is now only called from the
android framework.
Bug: 5057915
Change-Id: I8ca64cd1acd6cabf915bf54689ec2e5f6dfa495a
This change adds an enum value and a description of the expected
implementations to the EGL_ANDROID_recordable extension specification.
It also adds the new enum value to the 'eglext.h' header.
Change-Id: Ia0de2d5613708445ff83b85a7e550f9417531ee4
This change fixes how the Android EGL layer overrides the size and
format of an ANativeWindow in eglCreateWindowSurface. The new behavior
is to leave the size untouched when overriding the format. The previous
behavior was to reset the ANativeWindow to use the default size set by
the ANativeWindow implementation.
It also adds two new 'perform' methods to the ANativeWindow interface:
set_buffers_dimensions and set_buffers_format, and redefines the
behavior of set_buffers_geometry to be the combination of these two new
methods.
Additionally, this change adds an error check for the return value of
the new native_window_set_buffers_format call, which required adding a
(stub) handler for to FramebufferNativeWindow.
Change-Id: I805c7ccd8d4730dfb132d10d8bc3fb058a0b9df1
as specified by the EGL specification, terminated objects's
handles become invalid, the objects themselves are destroyed
when they're not current to some thread.
Change-Id: Id3a4a5736a5bbc3926a9ae8385d43772edb88eeb
This change removes the check that disallowed the creation of an
EGLSurface that would send frames to a SurfaceTexture.
Change-Id: I44c6d5df503cc676a88144d72d39b414692ce4c9
