This change adds an implementation of a cache that stores key/value
pairs of unstructured binary blobs.
Change-Id: Idd01fdabedfa3aed6d359a6efb0592967af52651
Added the concept of pointer properties in a MotionEvent.
This is currently used to track the pointer tool type to enable
applications to distinguish finger touches from a stylus.
Button states are also reported to application as part of touch events.
There are no new actions for detecting changes in button states.
The application should instead query the button state from the
MotionEvent and take appropriate action as needed.
A good time to check the button state is on ACTION_DOWN.
As a side-effect, applications that do not support multiple buttons
will treat primary, secondary and tertiary buttons identically
for all touch events.
The back button on the mouse is mapped to KEYCODE_BACK
and the forward button is mapped to KEYCODE_FORWARD.
Added basic plumbing for the secondary mouse button to invoke
the context menu, particularly in lists.
Added clamp and split methods on MotionEvent to take care of
common filtering operations so we don't have them scattered
in multiple places across the framework.
Bug: 4260011
Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
You can now specify resource configuration variants "wNNNdp"
and "hNNNdp". These are the minimum screen width/height in "dp"
units. This allows you to do things like have your app adjust
its layout based only on the about of horizontal space available.
This introduces a new configuration change flag for screen size.
Note that this configuration change happens each time the orientation
changes. Applications often say they handle the orientation change
to avoid being restarted at a screen rotation, and this will now
cause them to be restarted. To address this, we assume the app can
handle this new config change if its target SDK version is < ICS.
Change-Id: I4acb73d82677b74092c1da9e4046a4951921f9f4
This change the binder protocol between SurfaceTextureClient
and SurfaceTexture. dequeueBuffer() now takes the requested
parameters for the buffer. SurfaceTexture decides if the
buffer needs to be reallocated and does the allocation
if needed. In that case it returns BUFFER_NEEDS_REALLOCATION
to tell SurfaceTextureClient that it needs to call
requestBuffer (which all parameters have been removed) to
acquire a pointer to the buffer.
dequeueBuffer and requestBuffer could be folded into a single
IPC call, but we chose to optimize the case where buffers are
not created and avoid some complexity in the marshalling code.
Change-Id: I097a7f6f40a3491e10f3f3742eab33999286c304
This is the basic infrastructure for pulling a full(*) backup of the
device's data over an adb(**) connection to the local device. The
basic process consists of these interacting pieces:
1. The framework's BackupManagerService, which coordinates the
collection of app data and routing to the destination.
2. A new framework-provided BackupAgent implementation called
FullBackupAgent, which is instantiated in the target applications'
processes in turn, and knows how to emit a datastream that contains
all of the app's saved data files.
3. A new shell-level program called "bu" that is used to bridge from
adb to the framework's Backup Manager.
4. adb itself, which now knows how to use 'bu' to kick off a backup
operation and pull the resulting data stream to the desktop host.
5. A system-provided application that verifies with the user that
an attempted backup/restore operation is in fact expected and to
be allowed.
The full agent implementation is not used during normal operation of
the delta-based app-customized remote backup process. Instead it's
used during user-confirmed *full* backup of applications and all their
data to a local destination, e.g. via the adb connection.
The output format is 'tar'. This makes it very easy for the end
user to examine the resulting dataset, e.g. for purpose of extracting
files for debug purposes; as well as making it easy to contemplate
adding things like a direct gzip stage to the data pipeline during
backup/restore. It also makes it convenient to construct and maintain
synthetic backup datasets for testing purposes.
Within the tar format, certain artificial conventions are used.
All files are stored within top-level directories according to
their semantic origin:
apps/pkgname/a/ : Application .apk file itself
apps/pkgname/obb/: The application's associated .obb containers
apps/pkgname/f/ : The subtree rooted at the getFilesDir() location
apps/pkgname/db/ : The subtree rooted at the getDatabasePath() parent
apps/pkgname/sp/ : The subtree rooted at the getSharedPrefsFile() parent
apps/pkgname/r/ : Files stored relative to the root of the app's file tree
apps/pkgname/c/ : Reserved for the app's getCacheDir() tree; not stored.
For each package, the first entry in the tar stream is a file called
"_manifest", nominally rooted at apps/pkgname. This file contains some
metadata about the package whose data is stored in the archive.
The contents of shared storage can optionally be included in the tar
stream. It is placed in the synthetic location:
shared/...
uid/gid are ignored; app uids are assigned at install time, and the
app's data is handled from within its own execution environment, so
will automatically have the app's correct uid.
Forward-locked .apk files are never backed up. System-partition
.apk files are not backed up unless they have been overridden by a
post-factory upgrade, in which case the current .apk *is* backed up --
i.e. the .apk that matches the on-disk data. The manifest preceding
each application's portion of the tar stream provides version numbers
and signature blocks for version checking, as well as an indication
of whether the restore logic should expect to install the .apk before
extracting the data.
System packages can designate their own full backup agents. This is
to manage things like the settings provider which (a) cannot be shut
down on the fly in order to do a clean snapshot of their file trees,
and (b) manage data that is not only irrelevant but actively hostile
to non-identical devices -- CDMA telephony settings would seriously
mess up a GSM device if emplaced there blind, for example.
When a full backup or restore is initiated from adb, the system will
present a confirmation UI that the user must explicitly respond to
within a short [~ 30 seconds] timeout. This is to avoid the
possibility of malicious desktop-side software secretly grabbing a copy
of all the user's data for nefarious purposes.
(*) The backup is not strictly a full mirror. In particular, the
settings database is not cloned; it is handled the same way that
it is in cloud backup/restore. This is because some settings
are actively destructive if cloned onto a different (or
especially a different-model) device: telephony settings and
AndroidID are good examples of this.
(**) On the framework side it doesn't care that it's adb; it just
sends the tar stream to a file descriptor. This can easily be
retargeted around whatever transport we might decide to use
in the future.
KNOWN ISSUES:
* the security UI is desperately ugly; no proper designs have yet
been done for it
* restore is not yet implemented
* shared storage backup is not yet implemented
* symlinks aren't yet handled, though some infrastructure for
dealing with them has been put in place.
Change-Id: Ia8347611e23b398af36ea22c36dff0a276b1ce91
First step of improving app screen size compatibility mode. When
running in compat mode, an application's windows are scaled up on
the screen rather than being small with 1:1 pixels.
Currently we scale the application to fill the entire screen, so
don't use an even pixel scaling. Though this may have some
negative impact on the appearance (it looks okay to me), it has a
big benefit of allowing us to now treat these apps as normal
full-screens apps and do the normal transition animations as you
move in and out and around in them.
This introduces fun stuff in the input system to take care of
modifying pointer coordinates to account for the app window
surface scaling. The input dispatcher is told about the scale
that is being applied to each window and, when there is one,
adjusts pointer events appropriately as they are being sent
to the transport.
Also modified is CompatibilityInfo, which has been greatly
simplified to not be so insane and incomprehendible. It is
now simple -- when constructed it determines if the given app
is compatible with the current screen size and density, and
that is that.
There are new APIs on ActivityManagerService to put applications
that we would traditionally consider compatible with larger screens
in compatibility mode. This is the start of a facility to have
a UI affordance for a user to switch apps in and out of
compatibility.
To test switching of modes, there is a new variation of the "am"
command to do this: am screen-compat [on|off] [package]
This mode switching has the fundamentals of restarting activities
when it is changed, though the state still needs to be persisted
and the overall mode switch cleaned up.
For the few small apps I have tested, things mostly seem to be
working well. I know of one problem with the text selection
handles being drawn at the wrong position because at some point
the window offset is being scaled incorrectly. There are
probably other similar issues around the interaction between
two windows because the different window coordinate spaces are
done in a hacky way instead of being formally integrated into
the window manager layout process.
Change-Id: Ie038e3746b448135117bd860859d74e360938557
These definitions have been moved to system/core.
Change-Id: I021b6b5f2fd72d538b5ccdcb33860ebd3004d9ad
Signed-off-by: Iliyan Malchev <malchev@google.com>
query() does not modify the object's data, so it needs to be a const method
Change-Id: I67c40a3c865461e6f1cc2193fd2d74286ff6ac8f
Signed-off-by: Iliyan Malchev <malchev@google.com>
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: I5126b1e69d95252fda7f2a684c9287e239a57163
This removes the old non-public C++ API for TTS
engines and replaces it with a Java API.
The new API is still @hidden, until it has been approved.
Bug: 4148636
Change-Id: I7614ff788e11f897e87052f684f1b4938d539fb7
This leak was intentional, it was there to deal with the fact that
some gralloc implementations don't track buffer handles with
file-descriptors so buffers needed to stay alive until there were
registered, which is not guaranteed by binder transactions.
In this new implementation, we use a small BBinder holding a
reference to the buffer, which with tuck into the parcel. This forces
the reference to stay alive until the parcel is destroyed, which
is guaranteed (by construction) to happen after the buffer is
registered.
this allows the public facing API to not expose the previous hack.
Change-Id: I1dd6cd83679a2b7457ad628169e2851acc027143
You can now specify resource configuration variants "wNNNdp"
and "hNNNdp". These are the minimum screen width/height in "dp"
units. This allows you to do things like have your app adjust
its layout based only on the about of horizontal space available.
This introduces a new configuration change flag for screen size.
Note that this configuration change happens each time the orientation
changes. Applications often say they handle the orientation change
to avoid being restarted at a screen rotation, and this will now
cause them to be restarted. To address this, we assume the app can
handle this new config change if its target SDK version is < ICS.
Change-Id: I22f8afa136b4f274423978c570fa7c9855040496
SurfaceTexture now has the concept of default size a new method,
setDefaultBufferSize() to set it. When the default size is
changed, dequeueBuffer() will return a value telling the
client that it must ask for a new buffer.
The above only applies if the client has not
overriden the buffer size with setGeometry.
Change-Id: I520dc40363054b7e37fdb67d6a2e7bce70326e81
Runtime resource overlay allows unmodified applications to appear
as if they had been compiled with additional resources defined. See
libs/utils/README for more information.
This commit is the first iteration of runtime resource overlay. It
provides the actual overlay modifications and loading of trusted overlay
packages (ie residing in /vendor) targeting framework-res.apk.
This commit loads exactly one overlay package. The overlay,
if present, must target framework-res.apk and be located at
/vendor/overlay/framework/framework-res.apk.
Change-Id: If26ee7754813004a96c043dba37fbe99fa3919db
The idea is to assist with debugging by identifying cases in which
the input event stream is corrupted.
Change-Id: I0a00e52bbe2716be1b3dfc7c02a754492d8e7f1f
This patch adds a mechanism for capturing, filtering, transforming
and injecting input events at a very low level before the input
dispatcher attempts to deliver them to applications. At this time,
the mechanism is only intended to be used by the accessibility
system to implement built-in system-level accessibility affordances.
The accessibility input filter is currently just a stub.
It logs the input events receives and reinjects them unchanged,
except that it transforms KEYCODE_Q into KEYCODE_Z.
Currently, the accessibility input filter is installed whenever
accessibility is enabled. We'll probably want to change that
so it only enables the input filter when a screen reader is
installed and we want touch exploration.
Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
this type is still used by partner's source trees.
we will get rid of it in next release's timeframe.
This reverts commit 7b49b976277cb3538242151e7dbd24681ddec73e.
Added a timeout mechanism to EventHub and InputReader so that
InputMappers can request timeouts to perform delayed processing of
input when needed.
Change-Id: Iec2045baaf4e67690b15eef3c09a58d5cac76897
API addition: The timestamps are represented as nanoseconds from some
arbitrary time point. Like the SurfaceTexture transform matrix, the
timestamp retrieved by getTimestamp is for the last frame sent to the
GL texture using updateTexImage().
Camera HAL change: Expect vendors to set these timestamps using
native_window_set_buffers_timestamp(). For now, they are
autogenerated by SurfaceTextureClient if set_buffers_timestamp() is
never called, but such timing is likely not accurate enough to pass a
CTS test.
bug:3300707
Change-Id: Ife131a0c2a826ac27342e11b8a6c42ff49e1bea7
a memory corruption happned when the buffer pool was resized
(like when playing a video or using camera) and there was
no current active buffer. In this case, the faulty code
would index into an array at position -1 which corrupted
24 bytes of data.
also improved region validation code (ifdef'ed out by default)
Bug: 4093196
Change-Id: I915c581d131148959d720e00e3892e9186ab733d
Replaced VelocityTracker with a faster and more accurate
native implementation. This avoids the duplicate maintenance
overhead of having two implementations.
The new algorithm requires that the sample duration be at least
10ms in order to contribute to the velocity calculation. This
ensures that the velocity is not severely overestimated when
samples arrive in bursts.
The new algorithm computes the exponentially weighted moving
average using weights based on the relative duration of successive
sample periods.
The new algorithm is also more careful about how it handles
individual pointers going down or up and their effects on the
collected movement traces. The intent is to preserve the last
known velocity of pointers as they go up while also ensuring
that other motion samples do not count twice in that case.
Bug: 4086785
Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
Use full string comparisons instead of partial for
file extension and MIME type.
Do case-insensitive comparison of MIME type and file extensions.
Fix error in comment for String8::getPathExtension.
Remove dead code -- StringTokenizer is unused.
Change-Id: I322be6235abbdaab5f7eafa48926dbb2cf46dc29
This change adds a getter method to SurfaceTextureClient to get the
ISurfaceTexture object with which the SurfaceTextureClient is
communicating.
Bug: 4086509
Change-Id: Ifec621e0fe5392a5be56b2348fdc54067cbebcdd
This change adds a query to the ANativeWindow interface for getting the
concrete type of the ANativeWindow.
Bug: 4086509
Change-Id: I64aa86d72fbca3b52a98e1fc35608737781a3178
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
Associate each motion axis with the source from which it comes.
It is possible for multiple sources of the same device to define
the same axis. This fixes new API that was introduced in MR1.
(Bug: 4066146)
Fixed a bug that might cause a segfault when using a trackball.
Only fade out the mouse pointer when touching the touch screen,
ignore other touch pads.
Changed the plural "sources" to "source" in several places in
the InputReader where we intend to refer to a particular source
rather than to a combination of sources.
Improved the batching code to support batching events from different
sources of the same device in parallel. (Bug: 3391564)
Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
This change adds a new 'method' to the ANativeWindow interface to check
whether buffers queued to the window will be sent directly to the system
window compositor.
Change-Id: I4d4b199e328c110b68b250029aea650f03c8724d
Bug: 3495535
Bug #3461349
This change also fixes two bugs that prevented partial invalidates
from working with other views. Both bugs were in our EGL implementation:
they were preventing the caller from comparing the current context/surface
with another context/surface. This was causing HardwareRenderer to always
redraw the entire screen.
Change-Id: I33e096b304d4a0b7e6c8f92930f71d2ece9bebf5
37c2a37 fix [3408713] Dialog window invisible sometimes
d35c666 fix [3385504] Surface flinger hang when adding dim surface
1723b04 fix [3389263] OMX.Nvidia.h264.decode fails to shutdown
1b0114f fix a surface leak in SurfaceFlinger
Bug: 3513017
Change-Id: Ia13ed8c9cdcb1f484e177cdcaff687e7c88a10c3
Ensure that the joystick can always reach -1.0, 0.0 and 1.0 positions
even when noise filtering is applied. (Bug: 3514510)
Add support for a few more standard axes.
Add additional mapping modes for axes.
Some axes are inverted from standard interpretation
or are actually intended to be split into two distict axes
such as left/right trigger controls or accelerator/brake.
Add key layout file for a G25 racing wheel and XBox 360 controller
to tweak behavior. They work fine without them but the axis mappings
are not ideal.
Change-Id: I0fddd90309af4dc14d35f34fe99ed6e521c0b7c7
Ensure that the joystick can always reach -1.0, 0.0 and 1.0 positions
even when noise filtering is applied. (Bug: 3514510)
Add support for a few more standard axes.
Add additional mapping modes for axes.
Some axes are inverted from standard interpretation
or are actually intended to be split into two distict axes
such as left/right trigger controls or accelerator/brake.
Add key layout file for a G25 racing wheel and XBox 360 controller
to tweak behavior. They work fine without them but the axis mappings
are not ideal.
Change-Id: Id4c86a0a272331c680039a9bde6815bb7eba44ab
Added some plumbing to enable the policy to intercept motion
events when the screen is off to handle wakeup if needed.
Added a basic concept of an external device to limit the scope
of the wakeup policy to external devices only. The wakeup policy
for internal devices should be based on explicit rules such as
policy flags in key layout files.
Moved isTouchEvent to native.
Ensure the dispatcher sends the right event type to userActivity
for non-touch pointer events like HOVER_MOVE and SCROLL.
Bug: 3193114
Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
Fades out the mouse pointer:
- after 15 seconds of inactivity normally
- after 3 seconds of inactivity in lights out mode
- after a non-modifier key down
- after a touch down
Extended the native Looper to support enqueuing time delayed
messages. This is used by the PointerController to control
pointer fade timing.
Change-Id: I87792fea7dbe2d9376c78cf354fe3189a484d9da
- use GenerationCache for caching
- move GenerationCache.h from libs/hwui/utils to include/utils
- add #define for cache activation / deactivation
Change-Id: Ifaf519f0b5e33b087a453e4aa6430162d8438f20
This change adds a new query to ANativeWindow for getting the minimum
number of buffers that must be left un-dequeued during the steady-state
operation of the ANativeWindow.
Change-Id: Ie8c461fc26b02ecde02ddb4f95bf763662cf1551
Related-Bug: 3356050
There are two areas that have changed to eliminate the assumption that
local jobject references are both canonical and persistent:
1. JavaBBinderHolder no longer holds onto and reuses it parent object
reference per se. Since the underlying JavaBBinder object holds a
real global ref, this was redundant anyway. Now, for purposes of its
transient need to perform JNI operations, it simply uses the current
jobject ref(s) passed during method invocation, and no longer attempts
to hold these refs beyond the scope of a single invocation.
2. Binder obituaries no longer assume that a jobject reference to a
recipient will always compare == as a 32-bit value with any future
reference to the same object. The implementation now asks Dalvik
whether object references match.
This amended patch fixes the earlier bug around races between
remote binder death cleanup and local explicit unregistration of
VM-side death recipients.
Bug 2090115
Change-Id: I70bd788a80ea953632b1f466f385ab6b78ef2913
some of the conversion operators were not using the proper
pointer type when calling incStrong/decStrong, usually it
has no bad consequences, but for some implementation
of the ref-counted object it could lead to recording the wrong
owner id.
Change-Id: If574b9069b8a4cf6e0911a992c8f095aba799995
this was introduced recently. we make sure to use
the correct owner id (the sp) instead of the wp.
Change-Id: I78fdc6ec0c2d3e687278b70442d74d1924b512a2
There are two areas that have changed to eliminate the assumption that
local jobject references are both canonical and persistent:
1. JavaBBinderHolder no longer holds onto and reuses it parent object
reference per se. Since the underlying JavaBBinder object holds a
real global ref, this was redundant anyway. Now, for purposes of its
transient need to perform JNI operations, it simply uses the current
jobject ref(s) passed during method invocation, and no longer attempts
to hold these refs beyond the scope of a single invocation.
2. Binder obituaries no longer assume that a jobject reference to a
recipient will always compare == as a 32-bit value with any future
reference to the same object. The implementation now asks Dalvik
whether object references match.
Bug 2090115
Change-Id: If62edd554d0a9fbb2d2977b0cbf8ad7cc8e2e68d
First slipt sp<> out of RefBase into StrongPointer.h so it can be reused
more easily and to make it clear that it doesn't require RefBase.
Note: the rest of the change only affects the system when DEBUG_REFS is enabled.
The main problem we fix here is that the owner id associated with each
reference could get out of date when a sp<> or wp<> was moved, for
instance when they're used in a Vector< >.
We fix this issue by calling into RefBase::moveReferences from
a template specialization for sp<TYPE> and wp<TYPE> of the
type helpers. RefBase::moveReferences() has then a chance to
update the owner ids.
There is a little bit of trickery to implement this generically in
RefBase, where we need to use a templatized functor that can turn
a sp<TYPE>* casted to a void* into a RefBase*.
Introduced a new debug option DEBUG_REFS_FATAL_SANITY_CHECKS
currently set to 0 by default as there seem to be an issue
with sp<ANativeWindow> which trips the sanity checks.
Change-Id: I4825b21c8ec47d4a0ef35d760760ae0c9cdfbd7f
Added API on InputDevice to query the set of axes available.
Added API on KeyEvent and MotionEvent to convert keycodes and axes
to symbolic name strings for diagnostic purposes.
Added API on KeyEvent to query if a given key code is a gamepad button.
Added a new "axis" element to key layout files to specify the
mapping between raw absolute axis values and motion axis ids.
Expanded the axis bitfield to 64bits to allow for future growth.
Modified the Makefile for keyboard prebuilts to run the keymap
validation tool during the build.
Added layouts for two game controllers.
Added default actions for game pad button keys.
Added more tests.
Fixed a bunch of bugs.
Change-Id: I73f9166c3b3c5bcf4970845b58088ad467525525
This change makes it possible to extend the set of axes that
are reported in MotionEvents by defining new axis constants.
The MotionEvent object is now backed by its C++ counterpart
to avoid having to maintain multiple representations of the
same data.
Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
weak pointer comparison operators were implemented wrong,
they were using the internal "unsafe" pointer. We could end up
with two "equal" weak pointer pointing to different objects.
this caused KeyedVector keyed by weak pointer to work incorrectly, in
turn causing a window that just got added to a list to be immediately
removed.
Change-Id: Ib191010c39aafa9229109e4211f6c3b2b2f9696d
This change passes a reference to the IGraphicBufferAlloc binder object
to SurfaceTextureClient objects. When STC objects are created they
query their associated ISurfaceTexture object for the
IGraphicBufferAlloc that the SurfaceTexture uses to allocate buffers.
Having the SurfaceTextureClient hold this reference prevents the
GraphicBufferAlloc in SurfaceFlinger from freeing the allocated buffers
before the SurfaceTextureClient is done with them.
Change-Id: Ib8e30e8b37fdd60438cbb4cb7e9174d0ba6d661c
related-bug: 3362519
This changes the ANativeWindow API and the two implementations to reset
the window's crop rectangle to be uncropped when the window's buffer
geometry is changed.
Bug: 3359604
Change-Id: I64283dc8382ae687787ec0bebe6a5d5b4a0dcd6b
The touch screen sometimes reports more than 10 pointers even though that's
all we asked for. When this happens, we start dropping events with more
than 10 pointers. This confuses applications and causes them to crash.
Raised the limit to 16 pointers.
Bug: 3331247
The default behavior was to identify all touch devices as touch screens.
External devices that are plugged in are more likely to be touch pads
not attached to a screen. Changed the default to be a touch pad
and renamed some internal constants to avoid confusion.
A certain mouse happens to also behave like a touch pad. That caused
problems because we would see multiple concurrent traces of motion events
coming from the same input device so we would batch them up.
Added code to ensure that we don't batch events unless they come from
the same *source* in addition to coming from the same *device*.
Due to batching or misbehaving drivers, it's possible for the set of
pointer ids to be different from what we expect when it comes time to
split motion events across windows. As a result, we can generate motion
events with 0 pointers. When we try to deliver those events, we cause
an error in the InputTransport so we tear down the InputChannel and kill
the application.
Added code to check out assumption about pointer ids and drop the
event gracefully instead.
Patched up the tests to take into account the change in default behavior
for identifying touch screens and touch pads.
Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
Generally we never want to lock a buffer for write access if it is at
the "head" on the surfaceflinger side. The only exception (1) is when
the buffer is not currently in use AND there is at least one queued
buffer -- in which case, SurfaceFlinger will never use said buffer
anymore, because on the next composition around, it will be able to
retire the first queued buffer.
The logic above relies on SurfaceFlinger always retiring
and locking a buffer before composition -- unfortunately this
didn't happen during a screenshot.
This could leave us in a situation where a buffer is locked by the
application for write, and used by SurfaceFlinger for texturing,
causing a hang.
Here, we fix this issue by never assuming the exception (1), it was
intended as an optimization allowing ANativeWindow::lockBuffer() to
return sooner and was justified when most of SF composition was
done in software. The actual buffer locking is now ensured by
gralloc. We could have handled screenshots in a similar way to
a regular composition, but it could have caused glitches on screen,
essentially, taking a screenshot could cause to skip a frame.
now that we removed the notion of a "inUse" buffer in surfaceflinger
a lot of code can be simplified / removed.
noteworthy, the whole concept of "unlockClient" wrt. "compositionComplete"
is also gone.
Previously, display lists were used only if hardware acceleration
was enabled for an application (hardwareAccelerated=true) *and* if
setDrawingCacheEnabled(true) was called. This change makes the framework
use display lists for all views in an application if hardware acceleration
is enabled.
In addition, display list renderering has been optimized so that
any view's recreation of its own display list (which is necessary whenever
the visuals of that view change) will not cause any other display list
in its parent hierarchy to change. Instead, when there are any visual
changes in the hierarchy, only those views which need to have new
display list content will recreate their display lists.
This optimization works by caching display list references in each
parent display list (so the container of some child will refer to its
child's display list by a reference to the child's display list). Then when
a view needs to recreate its display list, it will do so inside the same
display list object. This will cause the content to get refreshed, but not
the reference to that content. Then when the view hierarchy is redrawn,
it will automatically pick up the new content from the old reference.
This optimization will not necessarily improve performance when applications
need to update the entire view hierarchy or redraw the entire screen, but it does
show significant improvements when redrawing only a portion of the screen,
especially when the regions that are not refreshed are complex and time-
consuming to redraw.
Change-Id: I68d21cac6a224a05703070ec85253220cb001eb4
now that we removed the notion of a "inUse" buffer in surfaceflinger
a lot of code can be simplified / removed.
noteworthy, the whole concept of "unlockClient" wrt. "compositionComplete"
is also gone.
Change-Id: I210413d4c8c0998dae05c8620ebfc895d3e6233d
InputReader::getSwitchState always returns AKEY_STATE_UNKNOWN
because SwitchInputMapper::getSources() returns 0 which cannot
match any source mask including AINPUT_SOURCE_ANY. As a result
initial lid switch detection is broken.
This change adds a new source constant AINPUT_SOURCE_SWITCH
that indicates that the source has switches.
Change-Id: I5321ecf0ce84f1c2b4535f6c163d3f4dcf9b7a9b
InputReader::getSwitchState always returns AKEY_STATE_UNKNOWN
because SwitchInputMapper::getSources() returns 0 which cannot
match any source mask including AINPUT_SOURCE_ANY. As a result
initial lid switch detection is broken.
This change adds a new source constant AINPUT_SOURCE_SWITCH
that indicates that the source has switches.
Change-Id: I5321ecf0ce84f1c2b4535f6c163d3f4dcf9b7a9b
This change implements the onFrameAvailable callback for the
SurfaceTexture java class. It includes the C++ SurfaceTexture code as
well as the JNI and Java code to enable the callback.
Change-Id: Ifd8b8e7ad46ee70cba6da1c2e96dab8045d1ea30
when we validate the surface there, most errors are in fact allowed
because it is legal to cancel a buffer after a surface has been
destroyed (for instance). in that case make sure to not log
error messages as they are very confusing.
Change-Id: Iecdfbaf6d9ee5da54d56cd7ea7a0d430c30934b0
This change fixes a horrible hack that I did to allow application
processes to create GraphicBuffer objects by making a binder call to
SurfaceFlinger. This change introduces a new binder interface
specifically for doing this, and does it in such a way that
SurfaceFlinger will maintain a reference to the buffers until the app is
done with them.
Change-Id: Icb240397c6c206d7f69124c1497a829f051cb49b
This change adds support for the setCrop and setTransform methods of the
SurfaceTexture C++ class. The crop and transform for the current
texture will be accessed by applications as a single texture coordinate
transform matrix.
Change-Id: I6482bf96f680e5c175364e848936db3908d6c8f8
Adds a new virtualKeyQuietTimeMillis configuration resource that sets
the duration for which virtual keys will be dropped after recent touches
on screen. The default value is 0; it is intended to be overridden
per device using a resource overlay.
This change is designed to help in two cases:
1. Swipes from touchscreen into virtual key area.
2. Accidental taps in virtual key area while using on-screen keyboard.
Bug: 3089163
Change-Id: Id6733c83c2e2bc8d9553aa0e5c1fd74b741bec6e
We need to reset mCurrentTexture and mLastQueued in setBufferCount
because it frees all of the buffers associated with the buffer slots.
Change-Id: Ie2f834ec1c07ce7a4ab9b2b5fc5fe8c294010c60
This change adds the C++ implementation of SurfaceTexture and related
classes. The goal of this is for a SurfaceTexture to be passed to
camera service or Stagefright in place of a Surface to allow camera
preview or decoded video frames to be streamed to an OpenGL ES texture
that an application can use.
Change-Id: I55c83a7017f1ecb81c9c9e3252cbd118b914296c
This change adds a new binder method to the ISurfaceComposer interface.
This IPC is intended to allow SurfaceFlinger clients to allocate gralloc
buffers using SurfaceFlinger as a proxy to gralloc.
Change-Id: Ide9fc283aec5da6268ba62cfed0c3319a50b640d
Added support for loading the pointer icon from a resource.
Moved the system server related bits of the input manager out
of libui and into libinput since they do not need to be linked into
applications.
Change-Id: Iec11e0725b3add2b905c51f8ea2c3b4b0d1a2d67
Make the output from aapt dump --values resources and aapt dump xmltree normalized, so that it is unambigously displayed
regardless of the content of the strings.
Change-Id: Ia3bff36c4ee1e9a44f474534e154830948beabdf
Some parts stubbed out but you can plug in a mouse and move
a green cursor around to interact with the UI.
Change-Id: I80d597a7f11d3bd92041890f74b3c77326975e6e
let cursor window size be set per device in device resources file.
default is 1MB.
for SR, it is 2MB.
it can be set to any value (in kB) in the device resource
strings.xml file
Change-Id: I67b1d04a5c9fc18b0cd4da6184d0b814b64d89e9
The asset system and supporting libraries were using off_t instead of
off64_t to access files larger than 2GB (32-bit signed). This change
replaces all off_t with off64_t and lseek64.
There is a new utils/Compat.h added for Mac OS compatibility.
Also fixed some size-related compiler warnings.
Bug: 3205336
Change-Id: I9097b3cb7a602e811fe52f245939d8975da55e9e
This change enables the framework to synthesize key events to implement
default behavior when an application does not handle a key.
For example, this change enables numeric keypad keys to perform
their associated special function when numlock is off.
The application is informed that it is processing a fallback keypress
so it can choose to ignore it.
Added a new keycode for switching applications.
Added ALT key deadkeys.
New default key mappings:
- ESC -> BACK
- Meta+ESC -> HOME
- Alt+ESC -> MENU
- Meta+Space -> SEARCH
- Meta+Tab -> APP_SWITCH
Fixed some comments.
Fixed some tests.
Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
* commit 'a2977c383d363e1e88a5b36230b1fa4c312807d2':
[3171580] SurfaceFlinger Bypass mode. (DO NOT MERGE)
[3171580] Add transform field to native buffers. (DO NOT MERGE)
some of these failures are not fatal and even expected in some cases
so they should not emit a dump in the log in those cases.
Change-Id: Idcfa252e3bfa9d74e27fe4ad8f8623aa01aa9c5e
Use Vendor ID, Product ID and optionally the Version to
locate keymaps and configuration files for external devices.
Moved virtual key definition parsing to native code so that
EventHub can identify touch screens with virtual keys and load
the appropriate key layout file.
Cleaned up a lot of old code in EventHub.
Fixed a regression in ViewRoot's fallback event handling.
Fixed a minor bug in FileMap that caused it to try to munmap
or close invalid handled when released if the attempt to map
the file failed.
Added a couple of new String8 conveniences for formatting strings.
Modified Tokenizer to fall back to open+read when mmap fails since
we can't mmap sysfs files as needed to open the virtual key
definition files in /sys/board_properties/.
Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
The ShortcutManager used to only receive the key code of the key event
that triggered the shortcut. This change now provides the shortcut
manager with the whole key event so it can look up the associated
character using the correct key character map.
To make this more efficient, added a mechanism for recycling
key events. At the moment it is only used by key events owned by the
system process, since clients of the existing API (such as Views)
might continue to hold on to key events after dispatch has finished so
they would break if the key event were recycled by the framework.
Deprecated KeyCharacterMap.BUILT_IN_KEYBOARD.
Change-Id: I4313725dd63f2be01c350c005a41c7fde9bc67e8
Fixed a bug with dpad keys on external keyboards being rotated
according to the display orientation by adding a new input device
configuration property called "keyboard.orientationAware".
Added a mechanism for overriding the key layout and key character
map in the input device configuration file using the new
"keyboard.layout" and "keyboard.characterMap" properties.
Also added "trackball.orientationAware", "touch.orientationAware" and
"touch.deviceType" configuration properties.
Rewrote the configuration property reading code in native code
so that it can be used by EventHub and other components.
Added basic support for installable idc, kl, and kcm files
in /data/system/devices. However, there is no provision for
copying files there yet.
Disabled long-press character pickers on full keyboards so that
key repeating works as expected.
Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
BREAKING CHANGE: Redesigned the key character map format to
accomodate full keyboards with more comprehensive suite of modifiers.
Old key character maps will not work anymore and must be updated.
The new format is plain text only and it not compiled to a binary
file (so the "kcm" tool will be removed in a subsequent check-in).
Added FULL keyboard type to support full PC-style keyboards.
Added SPECIAL_FUNCTION keyboard type to support special function
keypads that do not have any printable keys suitable for typing
and only have keys like HOME and POWER
Added a special VIRTUAL_KEYBOARD device id convention that maps
to a virtual keyboard with a fixed known layout. This is designed
to work around issues injecting input events on devices whose
built-in keyboard does not have a useful key character map (ie.
when the built-in keyboard is a special function keyboard only.)
Modified several places where events were being synthesized
to use the virtual keyboard.
Removed support for the "qwerty" default layout.
The new default layout is "Generic". For the most part "qwerty"
was being used as a backstop in case the built-in keyboard did
not have a key character map (probably because it was a special
function keypad) and the framework needed to be able to inject
key events anyways. The latter issue is resolved by using the
special VIRTUAL_KEYBOARD device instead of BUILT_IN_KEYBOARD.
Added the concept of a key modifier behavior so that
MetaKeyKeyListener can distinguish between keyboards that use
chorded vs. toggled modifiers.
Wrote more robust key layout and key character map parsers
to enable support for new keyboard features and user installable
key maps.
Fixed a bug in InputReader generating key ups when keys
are released out of sequence.
Updated tons of documentation.
Currently QwertyKeyListener is being used for full keyboards
with autotext and capitalization disabled. This mostly works
but causes some problems with character pickers, etc.
These issues will be resolved in subsequent changes.
Change-Id: Ica48f6097a551141c215bc0d2c6f7b3fb634d354
Split out all the UTF-8/16/32 handling code from String8/16 to its own
file to allow better reuse of code.
Change-Id: If9ce63920edc75472c38da4adce0d13cda9ad2f7
New default only applies to applications with targetSdkVersion >=
HONEYCOMB. Old applications default to no touch splitting for
their windows.
In addition, enabled split touch for various system windows.
Bug: 3049580
Change-Id: Idc8da9baa2cd8e1e4e76af8967d7b6a5ccb94427
Refactored ViewRoot, NativeActivity and related classes to tell the
dispatcher whether an input event was actually handled by the application.
This will be used to move more of the global default key processing
into the system server instead of the application.
Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
This change defines a macro NUM_FRAME_BUFFERS to set
the desired number of framebuffers to be used by the UI,
instead of hard-coding 2 framebuffers.
Aditional logic has been added to handle the initialization
and destruction of NUM_FRAME_BUFFERS buffers.
Change-Id: I3a4bfec3e0f453432f2ffebf084c00f574d3be46
Signed-off-by: Rodrigo Obregon <robregon@ti.com>
Allow a caller to request a different density than their current display
allows. This can mean a device displaying mdpi can get a resource that's
in hdpi and have it pretend to be in mdpi resolution. If a drawable
that's returned is not in the requested density, it will set it at the
appropriate density to be scaled up later on.
The API for this is hidden currently.
Bug: 3134688
Change-Id: I6c3908cbdef4907b8d3f1576df9e3b0e7af1755a
This patch makes the dispatcher drop all of its state when it is
disabled (when the screen turns off). This ensures that the dispatcher
does not get stuck thinking a pointer is still down if the screen
turned off while the user was touching the display (such as a fat touch
while hitting the power button).
Bug: 3098344
Change-Id: If50ef5804870aa1acd3179fd4b40e3cda58dd39d
Fixed a bug where we would lose the first touch point when swiping out of
the virtual key area.
Fixed a bug where we would not send an ACTION_MOVE event in cases where
individual pointers went down/up and the remaining pointers actually moved.
This is important since many applications do not handle pointer movements
during ACTION_POINTER_DOWN or ACTION_POINTER_UP. In the case of
ACTION_POINTER_UP the movement was completely lost since all pointers were
dispatched using their old location rather than the new location.
Improved motion event validation to check for duplicate pointer ids.
Added an input source constant that was missing from the NDK api but
defined in the framework api.
Added a timestamp when reporting added/removed devices in EventHub.
Bug: 3070082
Change-Id: I3206a030f43b7616e2f48006e5a9d522c4d92e56
Merge commit 'f2c406030874b355ca9e4e67cc0e3aff6103c23e'
* commit 'f2c406030874b355ca9e4e67cc0e3aff6103c23e':
Fix bug where home presses were not poking user activity.
Useful for tweaking touch screen alignment without having to modify the
kernel device driver x/y axis bounds.
Change-Id: I6ca43d3c138548f9dfb76aa33150a0c853698fb6
We now poke user activity twice: once upon dequeueing an event
for dispatch and then again just before we dispatch it. The second
poke is to compensate for the fact that it can take a few seconds to
identify the dispatch target (if the application is responding slowly)
but we want to keep the display from going to sleep for X amount of time
after the app gets a chance to actually receive the event. This mirrors
pre-Gingerbread behavior.
Removed some unnecessary code that filters user activity pokes when sending
events to KeyGuard. We don't need this because KeyGuard already tells the
power manager to disable user activity.
Bug: 3101397
Change-Id: I8c3a77601fdef8f584e84cfdd11aa79da0ff51db
Manual merge from Gingerbread.
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: Id876736fd8bf332ff9a5428bde59f5268aa49c3a
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: I8f8398f4fdeb0469e5d71124c21bedf121bd8c07
Added new key maps for external keyboards. These maps are intended to
be shared across devices by inheriting the "keyboards.mk" product
makefile as part of the device's product definition.
One of the trickier changes here was to unwind some code in
MetaKeyKeyListener that assumed that only the low 8 bits of the meta key
state were actually used. The new code abandons bitshifts in favor
of simple conditionals that are probably easier to read anyways.
The special meta key state constants used by MetaKeyKeyListener
are now (@hide) defined in KeyEvent now so as to make it clearer that they
share the same code space even if those codes are not valid for KeyEvents.
The EventHub now takes care of detecting the appropriate key layout
map and key character map when the device is added and sets system
properties accordingly. This avoids having duplicate code in
KeyCharacterMap to probe for the appropriate key character map
although the current probing mechanism has been preserved for legacy
reasons just in case.
Added support for tracking caps lock, num lock and scroll lock and
turning their corresponding LEDs on and off as needed.
The key character map format will need to be updated to correctly support
PC style external keyboard semantics related to modifier keys.
That will come in a later change so caps lock doesn't actually do
anything right now except turn the shiny LEDs on and off...
Added a list of symbolic key names to KeyEvent and improved the toString()
output for debug diagnosis. Having this list in a central place in the
framework also allows us to remove it from Monkey so there is one less
thing to maintain when we add new keycodes.
Bug: 2912307
Change-Id: If8c25e8d50a7c29bbf5d663c94284f5f86de5da4
Merge commit '5bfa3a34eaef759c3ec4def76f646eb1c0bf997f'
* commit '5bfa3a34eaef759c3ec4def76f646eb1c0bf997f':
implement part of [3094280] New animation for screen on and screen off
Added support for calibrating touch size for devices that report
size as an area measurement rather than as a width.
Fixed some bugs.
Bug: 3096045
Change-Id: I30a12e73752883516ed054f8af407204bca45814
3097475: Animation setting should control the screen on animation
3096779: CRT power-on animation can briefly show the top app instead of lockscreen
There is now a parameter that controls wether the ON and/or OFF animation are
performed. we also always clear the screen to black on power off, to make
sure it won't briefly appear on power on.
HOWEVER, 3096779 is not 100% fixed in the case where we're doing the animation
because there is a race, where SF doesn't wait (b/c it doesn't know) for the
framework to have redrawn the lockscreen.
Change-Id: Ie0f02c9225fcdf24b1e8907e268eb7da2c5b0a03
Merge commit '9a12a3c8d4bb20042cf69e07d268e3a04ac71f96'
* commit '9a12a3c8d4bb20042cf69e07d268e3a04ac71f96':
Remove dead code, and make the animation a setting.
turn off the electron beam
Switch to using PBKDF2 for the key generation for OBBs. Any previously
generated OBBs will stop being read correctly. A small pbkdf2gen program
is available to allow generation of appropriate keys with the salts.
Bug: 3059950
Change-Id: If4305c989fd692fd1150eb270dbf751e09c37295
Bug #3081600
The OpenGL renderer in libhwui uses a single EGL context per process and
thus create it with an RGBA 8888 EGL configuration. To ensure that all
windows are compatible with this configuration, this change modifies
the window manager and SurfaceFlinger.
The window manager now checks the window's flags and if the window is
hardware accelerated, it forces the window's pixel format to be
translucent when creating the surface. The window itself is still
marked as opaque if we know that the window will be opaque on screen.
This keeps existing optimizations in place.
Similarly in SurfaceFlinger, a translucent Surface can now be created
with the Surface.OPAQUE flag, indicating SurfaceFlinger that the surface
does not require blending, despite its RGBA 8888 configuration.
Change-Id: Ic747b6b12564ba064412d842117880fcc199eb7c
Copies the input state to the destination window and sends synthesic
cancelation events to the source window.
Change-Id: Ia75820b0d756ed5d6cd22dce7830251ac85141ed
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Cherry pick of b931a1b4 from gingerbread into master.
Change-Id: I700a5f07b8b227878cea9437a289a45a245c0424
Merge commit '41aabeb51305d19747687f246080f44fc2a74435'
* commit '41aabeb51305d19747687f246080f44fc2a74435':
Added more robust tracking and cancelation of events.
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Change-Id: I4d56fdcdd31aaa675d452088af39a70c4e039970
This change fixes several issues where events would be dropped in the
input dispatch pipeline in such a way that the dispatcher could not
accurately track the state of the input device.
Given more robust tracking, we can now also provide robust cancelation
of input events in cases where an application might otherwise become
out of sync with the event stream due to ANR, app switch, policy decisions,
or forced focus transitions.
Pruned some of the input dispatcher log output.
Moved the responsibility for calling intercept*BeforeQueueing into
the input dispatcher instead of the input reader and added support for
early interception of injected events for events coming from trusted
sources. This enables behaviors like injection of media keys while
the screen is off, haptic feedback of injected virtual keys, so injected
events become more "first class" in a way.
Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
- Register buffers with Gralloc when unflattening a GraphicBuffer (rather than
doing it in the Surface class).
- Add support for a GraphicBuffer that wraps an android_native_window_t*.
Change-Id: I029ac086111bbac800e5ca37eb505f558b718cd8
Merge commit '22cb4ef8ce9c4d5536ac5cee5c40b82bfa56ccc5'
* commit '22cb4ef8ce9c4d5536ac5cee5c40b82bfa56ccc5':
Switch Looper back to using poll() instead of epoll().
This change depends on the kernel having been patched to use hrtimers
instead of jiffies for scheduling epoll timeouts.
Change-Id: I216bc1c4f565e67ebcb3d2ba4280cb615932bb9e
Added a couple of micro-optimizations to avoid calling wake() unnecessarily
and reduce JNI overhead slightly.
Fixed a minor issue where we were not clearing the "next" field of Messages
returned by the MessageQueue so the Message would hold on to its successor
and potentially prevent the GC from collecting it if the message were leaked
somehow.
Change-Id: I488d29417ce0cdd7d0e447cda76ec978ef7f811c
Merge commit 'ff04e97faf75c435e453d4c1caf7eeac8b9c1ceb'
* commit 'ff04e97faf75c435e453d4c1caf7eeac8b9c1ceb':
fix [2835280] Add support for cancelling buffers to ANativeWindow
There is a new ANativeWindow::cancelBuffer() API that can be used to
cancel any dequeued buffer, BEFORE it's been enqueued. The buffer is
returned to the list of availlable buffers. dequeue and cancel are not
mutually thread safe, they must be called from the same thread or
external synchronization must be used.
Change-Id: I86cc7985bace8b6a93ad2c75d2bef5c3c2cb4d61
the core screenshot function now can capture the screen at any lower resolution
performing bilinear filtering.
we also now have some client code to interface with the screenshot service.
it's now possible to request a screenshot at a lower resolution.
Change-Id: I33689bba98507ab928d0898b21596d0d2fe4b953
AssetManager instances are created by zygote and passed to all its
children so that they don't have to individually open
frameworks-res.apk. This creates a problem for determining the current
file offset when using lseek() on those files, because you can't
guarantee the cross-process locking of a mutex. Luckily, Linux
implements pread() to get around this suckiness.
The problem is that only Linux implements this, so we have to keep the
old locking for use on host builds with aapt and friends. aapt doesn't
have this same problem of sharing file descriptors across forked
processes, so we can keep the local AutoMutex to protect accesses of
those files.
Change-Id: Ibe9f11499a53fe345f50fbaea438815ec0fd363e
Merge commit 'e11b76d3efb056edea301d53a354d0730adf3520'
* commit 'e11b76d3efb056edea301d53a354d0730adf3520':
Minor logging changes to input dispatcher to help with debugging.
This change narrows the opportunity for a race condition setting the
resource Configuration while devices are being updated.
Change-Id: I58efa563f4129ab0fce7108511d16a99dff7e451
There is apparently still a race upon reading the entry Local File
Header that can't be tracked down, so move the LFH check inside the
mutex-protected block so we can call lseek again to see where we are
when we log an error.
Also, close() can fail so use TEMP_FAILURE_RETRY on it so we don't
unwittingly leak file descriptors when Mean Mr. EINTR comes a-knocking.
Change-Id: I753abad0bd882fe28f7281c406fa76f64393ef4c
Added dumpsys reporting to EventHub.
Made the formatting a bit clearer.
Added 'Locked' suffix to some internal methods of EventHub.
Change-Id: Ic449560bcce378f6361895d27c66854e9724abb0
Merge commit '57fa3e8b4c94125ddb5be015dd7fbde4a458894f'
* commit '57fa3e8b4c94125ddb5be015dd7fbde4a458894f':
Support haptic feedback for virtual keys defined in key layout.
the core screenshot function now can capture the screen at any lower resolution
performing bilinear filtering.
we also now have some client code to interface with the screenshot service.
it's now possible to request a screenshot at a lower resolution.
Change-Id: I5a3b0e431421800e3aad601d9af8f94adffbc71f
