This change makes GLConsumer use the EGL_ANDROID_image_crop extension when
available on a device. The crop rectangle is passed to the EGL driver when
creating EGLImages, allowing the crop to be performed by the driver rather than
using the texture transform matrix.
Bug: 10897141
Change-Id: I63e9a5d5c85067376abc420e3639154468346311
EGL now picks the buffer format out of a small set
of formats compatible with CPU consumers instead of
using the EGL_NATIVE_VISUAL_ID.
Bug: 10194508
Change-Id: If423cd29601b7a3ace8670f4c73004132cfc4b31
If the implementation eglCreateContext failed, we called
eglGetError(), so we could check that it set the EGL error properly.
But since we'd already called this, when the app called eglGetError()
it would get EGL_SUCCESS!
Bug: 10181333
Change-Id: Ic45d3a8fcb8c4421e04844c6d2f52761790b5948
We've had the extended behavior since Android 4.3, but the extension
hadn't been ratified by Khronos yet so we couldn't add it to the
extension string.
Bug: 9681677
Change-Id: I78842316a3ab7a3f66a0ac1a4742d837de664c4c
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
While currently untested, this should allow to move the
BuffereQueue in the consumer process and have everything
work as usual.
Bug: 9265647
Change-Id: I9ca8f099f7c65b9a27b7e7a3643b46d1b58eacfc
If there are two or more buffers pending that are ready for
immediate presentation, drop all but the last one.
Any code that didn't explicitly specify timestamps for buffers
was using the default value (auto-generated "now"). As a result,
surfaceflinger would drop frames whenever more than one buffer
was queued. We now use zero as the auto-generated timestamp,
and we don't set the timestamp in eglBeginFrame().
Change-Id: I187f42d33de227cd3411ff0dcd3b9ce1961457eb
Fallout from the Flattenable change, update all its uses.
Additionnaly, fix/tighten size checks when (un)flatten()ing
things.
Removed the assumption by some flattenables (e.g.: Fence)
that the size passed to them would be exact (it can
and will be larger in some cases)
The code in Parcel is a bit complicated so that we don't
have to expose the full implementation (and also to
keep the code smallish).
Change-Id: I0bf1c8aca2a3128491b4f45510bc46667e566dde
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
The EGL 1.4 spec section 3.5.1 states that EGL_BAD_ALLOC should be set
if the supplied window already has an associated EGLSurface, not
EGL_BAD_NATIVE_WINDOW as is currently set.
Change-Id: If1598617f4e31904f2045560ae1cdf49d8a697dc
This allows apps to find OpenGL ES 3.0 functions using
eglGetProcAddress() instead of dlopen/dlsym.
Bug: 9681677
Change-Id: I7ce6e1636bc47d6b0bf20a4e46bd67235714d129
in the common case this saves one instructions per jump
(which will help with the i-cache).
this change also gets rid of the "use slow tls" option,
which was useless. So at least now architectures that don't have
assembly bindings will perform much better.
Change-Id: I31be6c06ad2136b50ef3a1ac14682d7812ad40d2
Make it faster and correcter.
Also, fixed the "gen" script to update the static/egl/*.java files
as part of doing an update. Altered the "git" lines to change
directories before invoking git -- necessary because we're now
split between frameworks/base and frameworks/native.
Bug 9204146
Change-Id: Ie60504b1932349e6f2c9d3868dee6a645ef2b36e
destroyed but current-to-a-thread resources are only destroyed
when they're made not-current; however, we were not destroying
those when the thread itself terminated, causing these resources
to be leaked forever.
we now install a tls-key destructor that takes care of this
by calling eglReleaseThread upon thread termination.
Bug: 9209776
Change-Id: I88298a34e3a27488eb81eab76717715569c7d57c
Initially populated with EGL_ANDROID_presentation_time (moved from the
EGL14 class) and the ES-relevant parts of EGL_KHR_create_context.
Bug: 8678160
Change-Id: Ifed2ee3da264ca701ae1f4b309a0758f7fcc3acc
We were recommending SystemClock#uptimeMillis() from Java code, but
millisecond resolution is a little coarse. We don't have an
appropriate call in SystemClock, so use System.nanoTime() instead.
Bug 8733179
Change-Id: Ifb85a03eabf7ff168966adcb5ed5914bbf3884b2
for single library:
/vendor/lib/egl/GLES.so
for multiple libraries:
/vendor/lib/egl/EGL.so
/vendor/lib/egl/GLESv1_CM.so
/vendor/lib/egl/GLESv2.so
EGL_BOARD_CONFIG as well as egl.cfg are not needed anymore.
To facilitate the transition, the loader will also look
for the older naming scheme.
Bug: 8631636
Change-Id: Id4b113468df29bae72b323f76598229914e1c7a1
The getarray() function checks to see if there's enough room in
the buffer, but it's using a byte count for the available size
and a possibly non-byte count for the space required. Dividing
down by the unit size corrects the problem.
Bug 8713753
Change-Id: Id42c0df65c3233dcc5f76d05e229f7d40d4c1f99
the code intended to filter out the software-renderer, but the
test as written was essentially a no-op.
the problem didn't happen most of the time because we had
updated egl.cfg to not even list the software renderer.
the test as written didn't generate a compile-time error
because String8 has a const char* cast operator; but the
end result was to compare pointers instead of the string
itself.
http://code.google.com/p/android/issues/detail?id=54606
Change-Id: I739dd1c838fbc24c5643a631fae19713a8ef1717
eglCreateSyncKHR requires a call to glFlush which we were not doing.
fixed by moving the code above eglSwapBuffers(), which both
fixes the problem and gives us a slightly better idea of when
the GPU is done drawing.
Change-Id: Ic826ef1fe25a6247742c3d49d0cb69f4031e3593
Updating the generator to handle GLvoid*/java.nio.Buffer return values
probably wouldn't be too hard, but this is the only function that
needs it currently.
Bug: 8566953
Change-Id: I359a951136ab479ab576ce2e5a2881b937b7e8c9
Just a search-and-replace on the glGetActiveAttrib special-case, since
they have the same signature and parameter handling.
Bug: 8566953
Change-Id: I40834d6f32bf9ecb39718df29036aa2d1bbfa07a
Some of these are new ES3 functions, some are existing ES2 functions
that can now use the new pixel pack/unpack buffer bindings.
glDrawElementsInstanced needs a special case since the pointer/offset
arg isn't the last one like the generator assumes.
Bug: 8566953
Change-Id: I638a36b0a31aefcb5bfee6f4d049348223045103
Return values are declared with the C return type, but the JNI
function returns the JNI return type. In the case of GLsync/jlong as
in glFenceSync(), this causes a compile error. So the generator now
explicitly casts the return value to the JNI return type.
Bug: 8566953
Change-Id: I814befe2e4cce745434cbc4e1c8639fc3ce8aeae
This change adds ES3 functions to GLES30.spec, disabling any that
require non-trivial changes for the generator to handle.
Steps taken to add these:
- Copy ES3 function declarations from gl3.h
- Remove GL_APICALL, GL_APIENTRY, and semicolon from each declaration
- Add whitespace around parens and *s as required by the parser
- Comment out functions that the generator doesn't understand or that
it generates bad Java interfaces for (by inspection).
Bug: 8566953
Change-Id: Iaaef7d53e24f9a576759dbba72cd206bae1c1276
With the addition of float framebuffer support in ES3, some parameters
to ES2 functions are now GLfloat instead of GLclampf. Both are
typedefs for 'float', so this is a source and binary compatible change.
Bug: 8566953
Change-Id: I0b5acc78da7799a04053fdb568205f793792cad9
We now detect at runtime which sync features to use, which
allows us to remove a lot of the compile-time configuration
options. There is still one option though, to disable
KHR_fence_sync on some devices (which are more efficient
without it).
- added a backdoor to get the vendor's EGL strings
the new logic is:
- use always ANDROID_native_fence_sync if available
- fallback to KHR_fence_sync if available and not disabled
by the compile-time option
- use KHR_wait_sync if available and either of the above is
enabled
Change-Id: I9c4b49d9ff1151faf902cc93bd53ea5f205aaabf
- move all the code related to EGL extensions in one place
- add missing extension strings:
EGL_KHR_lock_surface
EGL_KHR_reusable_sync
- add public extensions strings and entry-points
EGL_ANDROID_wait_sync
EGL_ANDROID_presentation_time
- add missing entry-points for EGL_KHR_reusable_sync
Change-Id: Ifd98966b549e8efd8ef5385eba0efde8c4cbc77b
In gcc 4.8, the warning for unused parameters (such as JNIEnv* pointers
in JNI functions that don't need it) is enabled by default - causing
-Werror to break the build.
Change-Id: Ib91721f2cb9912b79c2ac19b4210b1309b08304f
Signed-off-by: Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org>
- added a ctor that updates and dumps the stack immediately
- added a "logtag" parameter to dump()
Change-Id: Ie51c256071d282591752243bdb4f68cf9ff8829d
This isn't really right either, but avoids having an extra buffer that
the consumer has to drain which it might not be expecting.
To be correct, disconnecting a surface from a context should retain
the current buffer and continue using it when reconnected. The buffer
should only be canceled when the surface is destroyed. That will wait
for a later change.
Bug: 8320762
Change-Id: I5efa39c741193ca4f5612ea9de001ccbb683b345
Added EGL extension to set a timestamp on a surface.
Also, fix JNI encoding of "long" in glgen.
Bug 8191230
Change-Id: I38b7334bade3f8ff02bffe600bb74469ef22c164
- added support for comments in checks.spec
- added most missing checks
- added and commented with // special-cased functions
- added and commented with # functions that are still missing validation checks
- moved glGet* to a special case and updated all the "pnames" from the khronos spec
- changed ifcheck to default to 1 value. this allows us to simplify the checks.spec file
and handle unknown pnames automatically (they'll be validated against 1 value, if
it happens to need more, the call will go through but the validation will not
happen).
- refactored the cpp headers in to a common header + GLES version specific
header
Bug: 7402895
Change-Id: Ib5c68ca0ca416407b4cfa36e3a21901b2d6263ab
* changes:
Symlink /system/lib/libGLESv3.so -> libGLESv2.so
Add ES3 support to libGLESv2 and tracing tools
Import OpenGL ES 3.0 headers from Khronos SVN
- it looks like UserId has been renamed to UserHandle in the
framework.
- also for some reason I don't understand glgen didn't seem
to be up to date with respect to the generated bindings in the tree.
It's like the bindings were generated with a more recent version of
glgen (maybe it was never checked in). So we fix that here.
Change-Id: Ie49522ebf67fcab9213246b4d93500e37a3cbc05
The platform has a unified GLES2/GLES3 wrapper in libGLESv2.so, which
is what bundled binaries should link against. The NDK will have
separate GLES2 and GLES3 libraries so that applications will get a
link error if they accidentally use GLES3 entry points in a GLES2
application. This symlink allows GLES3 NDK apps to load using the
unified wrapper.
Change-Id: Ic344ef63c334047fccebb55b7cb2fb23a4c2d61b
Since ES3 is backwards compatible with ES2, a new wrapper isn't
necessary, and the Khronos implementation guidelines recommend
supporting both versions with the same library.
Change-Id: If9bb02be60ce01cc5fe25d1f40c4e7f37244ebf6
Add MODULE_LICENSE_MIT: The GLES headers use an MIT license or a
slight variant of it (the "SGI Free Software License B version 2.0",
http://oss.sgi.com/projects/FreeB/).
Change-Id: Ic8f946341cdd0d579f51b6f7a3ee109cd31b1691
This change has been made in Khronos SVN for GLES2 already, however it
is mildly controversial and discussion is on-going.
This change is necessary for Android because otherwise applications
cannot include both GLES2/gl2.h and GLES3/gl3.h as the glShaderSource()
prototype mismatches. Native programs may include framework headers
(which now include GLES3 headers only) but already have included GLES2
headers, creating an incompatibility.
Change-Id: I70a4075e079ee063e76cef5a227abb0ae70aebb4
Avoids irrelevant output differences based on the user's locale. The
current output files were generated with a C or POSIX locale, and sort
differently under en_US.UTF-8.
Change-Id: I0dd85475e9ee2d58e7fa9fe2a4f86ad5c8142e00
# By luliuhui
# Via Android Git Automerger (1) and others
* commit '873ab60e94811488caea1906eb98133329a3e28f':
Gfx-3d: fix GetProcAddress in egl extention
This patch can fix issue when Proc address return NULL.
Glbench10, egl-ext and conformance test need this patch to run pass.
Change-Id: I275c7cb6f77cb334c3ee7fa23cd696bba1c5a458
Author: Liuhui Lu <liuhui.lu@intel.com>
Signed-off-by: Shuo Gao <shuo.gao@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
Signed-off-by: Jack Ren <jack.ren@intel.com>
Author-tracking-BZ: 52622
Currently, to activate OpenGL tracing, an application has to be
start with --opengl-trace option (or have a debug prop set).
This CL adds support for tracing an application which may already
be running. This is implemented as follows:
- DDMS initiates a JDWP message to the VM indicating that
opengl traces be enabled.
- When that message is received, a flag is set that indicates
that tracing should be enabled.
- The trace flag is checked during every eglSwap() operation,
and if it finds that tracing should be active and it isn't,
then it starts the tracing component.
Change-Id: I3347fe89fc06c7404d7aa9360f4b21e5bf36ebcb
The C++ class names don't match what the classes do, so rename
ISurfaceTexture to IGraphicBufferProducer, and SurfaceTexture to
GLConsumer.
Bug 7736700
Change-Id: Ia03e468888025b5cae3c0ee1995434515dbea387
No significant changes. The extensions now have assigned extensions
numbers. And Jon Leech added missing suffixes in the declaration of
eglSetBlobCacheFuncsANDROID; our header and code already had the
suffix.
Change-Id: I2faad8ebe0ca81b13e29729a15515ee6b17b94b2
This change replaces all references to the "EGL_NO_NATIVE_FENCE_ANDROID" enum
with "EGL_NO_NATIVE_FENCE_FD_ANDROID".
Bug: http://code.google.com/p/android/issues/detail?id=40295
(cherry-pick from master)
Change-Id: Ie25d4ab9721d8b69b8d4afcf18e902ef8e3ad911
This change replaces all references to the "EGL_NO_NATIVE_FENCE_ANDROID" enum
with "EGL_NO_NATIVE_FENCE_FD_ANDROID".
Bug: http://code.google.com/p/android/issues/detail?id=40295
Change-Id: I049b2ba185c2dbdccb8fc069701dbe805d63f645
The shell property debug.egl.trace can now be set to:
0
disables tracing
1
logs all GL calls
error
checks glGetError after every GL call, logs a stack trace on error
systrace
logs each GL call to systrace
Change-Id: I34a2a2d4e19c373fd9eaa1b0cd93e67c87378996
The debugging and tracing levels are initialized both during
early_egl_init and egl_display_t::initialize(). For apps this has
no effect since early_egl_init is called in the context of zygote.
This CL removes the unnecessary call from early_egl_init.
Change-Id: Ibc55c26228cd197f2e2623fbfb2d1a63d0722401
This change adds a new extension for EGL implementations to indicate the
EGLConfigs that support use as a HWComposer framebuffer target layer.
Change-Id: Ia7c8fbe8da09d57b4ec8bf1d9ddb67ca21aa2885
This change fixes a bug where initializing EGL multiple times (eglTerminate
followed by eglInitialize) would cause extensions to show up in the extension
string multiple times.
Change-Id: I707a3da62ed30ef13835087167f84a08bc6addd7
This change adds support for the EGL_ANDROID_native_fence_sync extension to the
Android EGL layer. It also fixes a couple minor issues with the extension spec.
Change-Id: Ic8829d21f37b701f33aa9c72c3d25e88e03fa3cd
This change updates the extension spec to refer to generic "native fence sync
objects" rather than "Android fence sync objects."
Change-Id: I15a79f08571586431845b54c58c8420b652f40ef
