When there are no window layers for a display, SurfaceFlinger clears
the undefined region using GLES. Some of the places that check for
GLES composition weren't considering this special case, in particular:
- We were skipping the eglSwapBuffers() on these frames.
- We were putting VirtualDisplaySurface in HWC-only composition mode.
This change centralizes the logic for this special case.
Bug: 10957068
Change-Id: I2deaf2ed101e8ea76708862a6bb67751b6078794
We weren't dequeing and setting the output buffer until just before
set(). This didn't allow HWC to make decisions in prepare() based on
the output buffer format, dimensions, etc.
Now we dequeue the output buffer at the beginning of the composition
loop and provide it to HWC in prepare. In GLES-only rendering, we may
have to cancel the buffer and acquire a new one if GLES requests a
buffer with properties different than the one we already dequeued.
Bug: 10365313
Change-Id: I96b4b0a851920e4334ef05080d58097d46467ab8
This change adds an entire field to note whether the timestamp was
auto-generated by Surface or supplied by the application.
The value is used when deciding whether or not to drop frames based
on buffer presentation timestamps. If a desired presentation time
was set explicitly, BufferQueue will use that value to decide if a
frame should be dropped. If the timestamp was generated by Surface
at the time the buffer was queued, the timestamp is ignored.
Bug 10151804
Change-Id: Ibd571a7578351063b813cbdad2ddbeed70655ba5
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
we can now queue/dequeue a buffer in asynchrnous mode by using the
async parameter to these calls. async mode is only specified
with those calls (it is not modal anymore).
as a consequence it can only be specified when the buffer count
is not overidden, as error is returned otherwise.
Change-Id: Ic63f4f96f671cb9d65c4cecbcc192615e09a8b6b
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
The previous implementation assumed that the HWC could read and write
the same buffer on frames that involved both GLES and HWC composition.
It turns out some hardware can't do this. The new implementation
maintains a scratch buffer pool to use on these mixed frames, but on
GLES-only or HWC-only frames still does composition directly into the
output buffer.
Bug: 8384764
Change-Id: I7a3addb34fad9bfcbdabbb8b635083e10223df69
When acquiring a buffer, SurfaceFlinger now computes the expected
presentation time and passes it to the BufferQueue acquireBuffer()
method. If it's not yet time to display the buffer, acquireBuffer()
returns PRESENT_LATER instead of a buffer.
The current implementation of the expected-present-time computation
uses approximations and guesswork.
Bug 7900302
Change-Id: If9345611c5983a11a811935aaf27d6388a5036f1
When a buffer had a crop (meaning its content is scaled to the window size)
and a window crop was defined, the resulting crop couldn't be expressed
properly because h/w composer's API was limited to integers, since
this is fixed in h/w composer 1.3, we take adventage of this to
make sure we get the correct crop.
this bug could result in the buffer being scaled by an incorrect ratio and
be slightly offset; moreover, it would produce different results from the
GL code path, which is always correct.
Change-Id: I8e20e00b6e26177d14f4ab4d2cd581e26c818892
Instead of representing the buffer-queue as a vector of buffer
indices, represent them as a vector of BufferItems (copies).
This allows modifying the buffer slots independent of the queued
buffers.
As part of this change, BufferSlot properties that are only
been relevant in the buffer-queue have been removed.
Also, invalid scalingMode in queueBuffer now returns an error.
ConsumerBase has also changed to allow reuse of the same
buffer slots by different buffers.
Change-Id: If2a698fa142b67c69ad41b8eaca6e127eb3ef75b
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
- timeout is now 3 seconds instead of 1
- simplifies the API a bit
- allows us to change/tweak this timeout globaly
Bug: 8988871
Change-Id: I8d3c6ec43a372f602fb3f29856710339f86c0ec9
HWComposer queries the HWC for dimensions of physical displays, but
can't do that for virtual displays. The dimensions are used to set the
display frame of the framebuffer target layer passed to HWC, and
implicitly the dimensions of the virtual display.
Bug: 8316155
Change-Id: I9cbd2530d2fa878f86128a1472def520b5d694a5
DisplayDevices can be released when DisplayManager removes them from
the display list, or (for virtual displays) when the surface is set to
NULL. We were only cleaning up HWC resources associated with the
display in the first case.
Bug: 8384764
Change-Id: Id3d226dd7178fbe6d0a2ac4e2660b864ee073de3
If we're using a HWC that doesn't support virtual displays, or we have
more virtual displays than HWC supports concurrently, the
VirtualDisplaySurface should simply be a passthrough from source
(GLES) to sink.
This change also tries to distinguish between display types and HWC
display IDs a little better, though there's more to do here. Probably
needs a higher-level rethink; it's too error-prone now.
Bug: 8446838
Change-Id: I708d2cf262ec30177042304f174ca5b8da701df1
HWComposer didn't allow the virtual display output buffer to be set
directly, instead it always used the framebuffer target buffer.
DisplayDevice was only providing the framebuffer release fence to
DisplaySurfaces after a commit.
This change fixes both of these, so both HWComposer and DisplayDevice
should continue to work if VirtualDisplaySurface changes to use
separate framebuffer and output buffers. It's also more correct since
VirtualDisplaySurface uses the correct release fence when queueing the
buffer to the sink.
Bug: 8384764
Change-Id: I95c71e8d4f67705e23f122259ec8dd5dbce70dcf
Previously we only queued a virtual display buffer to the sink when
the next frame was about to be displayed. This may delay the "last"
frame of an animation indefinitely. Now we queue the buffer as soon as
HWC set() returns and gives us the release fence.
Bug: 8384764
Change-Id: I3844a188e0f6ef6ff28f3e11477cfa063a924b1a
BufferQueueInterposer allows a client to tap into a
IGraphicBufferProducer-based buffer queue, and modify buffers as they
pass from producer to consumer. VirtualDisplaySurface uses this to
layer HWC composition on top of GLES composition before passing the
buffer to the virtual display consumer.
Bug: 8384764
Change-Id: I61ae54f3d90de6a35f4f02bb5e64e7cc88e1cb83
DisplayDevice now has a DisplaySurface instead of using
FramebufferSurface directly. FramebufferSurface implements
DisplaySurface, and so does the new VirtualDisplaySurface class.
DisplayDevice now always has a surface, not just for virtual displays.
In this change VirtualDisplaySurface is just a stub; buffers still go
directly from GLES to the final consumer.
Bug: 8384764
Change-Id: I57cb668edbc6c37bfebda90b9222d435bf589f37
None of these should change behavior, except for removing some
incorrect log messages when using a virtual display.
- HWComposer::getAndResetReleaseFenceFd() checks the HWC version, so
no need to do that in the DisplayDevice::onSwapBuffersCompleted().
However, it should check that mFramebufferSurface is not NULL like
it is for virtual displays.
- Comment that FramebufferSurface::dump() overrides the non-virtual
ConsumerBase::dump(), and fix it so the right thing happens
regardless of the static type of the pointer/reference the callee
has. FramebufferSurface::dump() could be removed right now, but I'd
need to bring it back in a later change.
- Use the right enum for validating display type ids.
- Don't try to send hotplug events for virtual displays.
- Mark virtual displays as connected so HWComposer::prepare() doesn't
think something is wrong when it gets a non-NULL layer list.
- Remove unused FramebufferSurface methods.
Bug: 8384764
Change-Id: Id28a2f9be86b45f4bb7915fdf7752157035f4294
The functionality of LayerBase and Layer is folded
into Layer. There wasn't a need for this abstraction
anymore.
Change-Id: I66511c08cc3d89009ba4deabf47e26cd4cfeaefb
This change eliminates the uses of a NULL sp<Fence> indicating that no waiting
is required. Instead we use a non-NULL but invalid Fence object for which the
wait methods will return immediately.
Bug: 7892871
Change-Id: I5360aebe3090422ef6920d56c99fc4eedc642e48
This workaround a HWC HAL issue in Nexus 7, which causes videos and live
wallpapers to animate slowly.
Bug: 7563862
Change-Id: I87803aaad9751b1fd8392b9732304d4bccec659a
The C++ class names don't match what the classes do, so rename
ISurfaceTexture to IGraphicBufferProducer, and SurfaceTexture to
GLConsumer.
Bug 7736700
Change-Id: Ia03e468888025b5cae3c0ee1995434515dbea387
This workaround a HWC HAL issue in Nexus 7, which causes videos and live
wallpapers to animate slowly.
Bug: 7563862
Change-Id: I16ad85317e3e7f47f005e7397357c14186b0a13d
This change adds functionality to the HWComposer class to track the retire
fences returned by each hwc set call. It adds the HWComposer::getDisplayFence
method to allow other parts of SurfaceFlinger to get a fence that will signal
when the most recent flip takes effect on a display.
Change-Id: I676e0f98440fc58ed70908aa1a1e2ee3e7bf9eb2
The code that reserves display IDs was only run when a hardware
composer was present. The eventControl() function, which handles
enabling of vsync, was ignoring the request because the primary
display didn't appear in its set of allocated IDs. This moves
reservation of IDs for built-in displays outside the HWC-only block.
Also, added a couple of warnings in eventControl().
Bug 7376568
Change-Id: I185ccdf817a25499b5c2668f8f6d594afb8c1568
Two issues:
(1) We were announcing the hotplug event before we were ready to
handle blank/unblank events, so we were losing the initial unblank
that power manager sends us when HDMI is first plugged in. This
left the display blank until you toggled the device power off/on.
(2) We were retaining fbTargetHandle for HDMI after the display was
disconnected. The value didn't get updated when HDMI was reconnected
because the display was blank, so we didn't go through that code
path. So, when HDMI was re-connected, we passed stale data into
the HWC.
Bug 7323938
Change-Id: I2335d24fd7b0f00bb23fc63aa7bcf44cb8857c73
The new disconnectDisplay function doesn't handle virtual displays,
but it may be called for them. Return without doing anything.
Bug 7281786
Change-Id: I62607f2ae6073fa66b393f55932604aeb8e03566
when enabling/disabling vsync we now make sure to
not call into the HAL if the state wouldn't change.
Bug: 7274951
Change-Id: Ie24a6d68888a51b577acf9c2a973d85437cbacaf
The display was being removed from SurfaceFlinger's list before we
had a chance to reset HWComposer's layer list, so we were passing
stale data into the hardware composer (which has its own per-display
data). This resulted in "invalid gralloc handle" complaints.
We now clear the layer list immediately after removing the display.
The display was being removed while its EGLSurface was still
"current", resulting in "cancelBuffer: BufferQueue has been
abandoned" complaints. We now call makeCurrent on the primary
display before removing the external display.
Bug 7274254
Change-Id: Ia59e3a61d7ec46488b96bf93ec5e4ed3488b70e4
This change makes SurfaceFlinger reset the acquire fence fd to -1 after each
call to HWComposer::commit. The HWComposer implementation is resonsible for
closing the fd, so SurfaceFlinger should make sure not to pass it to HWC
multiple times.
Change-Id: I79554d9f6d6ef2b77d632d40251516c1f5b16ddb
Bug: 7258954
This allows us to blank and unblank displays other than the built-in
display (e.g. HDMI).
Bug: 7240511
Change-Id: I89ea13f9e497be74c3e1231d0c62fb558e93e0f8
getDisplayInfo() now returns proper information for
HWC managed displays.
hotplug is sitll not supported; so this is not fully correct
as the information returned will be bogus if the HDMI screen
is not plugged in.
Bug: 7191563
Change-Id: If55d8e829fae0443571548155007f486cdf9bc9f
- decouple GL and main display initialization
- ensure that each "supported" display has its own FramebufferSurface
- onScreenAcquired/Released now takes a display
Change-Id: If34a05f3dea40f6c79db77f4dde283a2580daac4
This adds a trivial workaround for a one-shot boot time crash, plus
an explicit check and abort for a failure condition that currently
presents as a less obvious failure.
Bug: 7145521, 7147557
Change-Id: I548f6a9caa9f0bd5710aaecea0e1c6c7c8f2f281
FramebufferSurface no longer speaks directly to the FB HAL. Now
everything goes through HWComposer (which may or may not be
connected to a hardware composer).
Added display index arg to some query methods.
Change-Id: Id3e157d2d4e3555d33afbb703e518b6e92e2d6d5
This change moves some common fence handling code into the base class for
BufferQueue consumer classes. It also makes the ConsumerBase class initialize
a buffer slot's fence with the acquire fence every time a buffer is acquired.
Change-Id: I0bd88bc269e919653b659bfb3ebfb04dd61692a0
the problem was that LayerBase::setPerFrameData() was always setting
this flag. in fact there was no reason to do this at that point since
the layer is initialized to a default state in setGeometry().
Bug: 7111259
Change-Id: Ib37b0dd7391a6163070e9aca025512159c1705f9
If SurfaceFlinger needs to refresh the screen but the dirty region is
empty, it won't set the layer acquire fences, and stale file
descriptors will be passed to HWC commit(). Now we make sure to clear
the stale file descriptors for each layer right after commit().
Bug: 7078301
Change-Id: I6953ff91fc5488f105b30b07306f9c45a4c3f780
we used to have a visibleRegion object per layer, but now
it's per screen; so at somepoint the code got changed to
calculate the per-screen visible region on the stack and that's
what got passed to HWC.
we're now setting the visibleRegionScreen at each frame and
freeing at after the HWC set() call. We use the underlaying
SharedBuffer so that in most cases we don't have to allocate,
free or copy memory around.
Bug: 7089478
Change-Id: I24fa556c76613a225d9fe7a6c6b727bb476144d8
This change makes BufferQueue derive the min undequeued buffer count from a max
acquired buffer count that is set by the consumer. This value may be set at
any time that a producer is not connected to the BufferQueue rather than at
BufferQueue construction time.
Change-Id: Icf9f1d91ec612a079968ba0a4621deffe48f4e22
This change is a clean up of some of the handling of the maximum number of
buffers that are allowed at once. It mostly renames a few member variables and
methods, but it includes a couple small refactorings.
Change-Id: I9959310f563d09583548d4291e1050a7bbc7d87d
The primary display device was being configured to "blank" by
default, which prevented the boot animation from appearing
(unless you got lucky with the hardware composer state).
Bug 6975688
Change-Id: I0fa52e9e719c6e997c5725a7baf15d9718461b78
HWComposer can now create IDs representing a display
it can deal with. IDs MAIN and HDMI are reserved.
SurfaceFlinger associate HWComposer IDs with a
DisplayDevice and uses that when it talks to HWComposer.
A DisplayDevice doesn't have to have a HWComposer ID,
in that case it just can't use h/w composer composition.
Change-Id: Iec3d7ac92e0c22bf975052ae2847402f58bade71
fix a few bugs with external displays
- HWComposer doesn't really handle multiple displays yet
so there is a lot of ugliness there
- We also need to make sure that external displays are not
blanked by default
- due to some EGL limitations surfaces being swapped need
to be current
Change-Id: I82bff05b43bcebd8da863c7c76b4edbc3bc223a9
- also replace C casts with C++ casts
- only the interface is changed, HWComposer still doesn't
fully handle multiple displays
Change-Id: I48eb89bff2edb76bf1d4d41f46802b9b2a7166a8
This change refactors the FramebufferSurface class to inherit from the new
ConsumerBase class.
Bug: 6620200
Change-Id: I46ec942ddb019658e3c5e79465548b171b2261f2
- fix typo drawForSreenshot misspelled
- get rid of DisplayDeviceBase
- removed unused or unneeded code
- always pass a DisplayDevice to Layer methods that are called
on a per-display basis (to make it clear that this could be
called more than once per composition).
Change-Id: Id948b7e09fe5c06db0e42d40d6ed75dd095c7f44
Commit 8630320 moved the eglSwapBuffers fallback (for devices with no
HWC implementation) from DisplayHardware to HWComposer. But HWComposer
only knows about the framebuffer EGL display and surface handles if
there is a HWC, so it was always passing bogus handles.
This change moves the eglSwapBuffers fallback up to SurfaceFlinger,
which has access to the framebuffer EGL handles.
Bug: 6886613
Change-Id: Iad3f5ff7c90ee48d7053999e6a4548d6794b6ebd
we will only ever have a single instance of HWComposer, so
it's now an attribute of SurfaceFlinger, instead of being part
of DisplayHardware.
DisplayHardware now just represents a "display" (it should be renamed).
Change-Id: Iec191e57686868e1df6daa8b880a286c9fefde56
mostly refactored SurfaceFlinger.h, but also removed dead code.
cleaned-up a few includes as well.
Change-Id: Ib15f4ffe567912b61ee98aa076c6a283b72811b5
Call into the new HWC blank operation to blank or unblank the screen.
Legacy systems may have already blanked the screen via early suspend,
and can choose to not implement the blank operation in their hardware
composer implementation.
Change-Id: Ib403c8c0e36367a2cfef3e1d124872fcfeb9e7cb
both API and implementation will change, this is just a prototype
intended to show feasability.
SurfaceFlinger is passed an ISurfaceTexture through a new
callback, it is in turn used to create an EGLSurface which
surfaceflinger will draw into in addition to the main screen.
Change-Id: Id0bbb0b854bb7bae44d57246a90b65d4567f9a21
After a HWC set, each SurfaceFlinger Layer retrieves the release fence
HWC returned and gives it to the layer's SurfaceTexture. The
SurfaceTexture accumulates the fences into a merged fence until the
next updateTexImage, then passes the merged fence to the BufferQueue
in releaseBuffer.
In a follow-on change, BufferQueue will return the fence along with
the buffer slot in dequeueBuffer. For now, dequeueBuffer waits for the
fence to signal before returning.
The releaseFence default value for BufferQueue::releaseBuffer() is
temporary to avoid transient build breaks with a multi-project
checkin. It'll disappear in the next change.
Change-Id: Iaa9a0d5775235585d9cbf453d3a64623d08013d9
The acquire and release fences aren't yet used; this is just support
for the new version and temporary backwards compatibility for older
versions.
Change-Id: Ia5ccc05a97c86f649042b9a35e11042fa0187e84
HWComposer must abstract the HWC HAL entirely, so that the
HAL can continue to evolve (and break binary compatibility)
without breaking SurfaceFlinger. The HWC data structure had
leaked outside of HWComposer, this is now fixed.
We now have an abstract interface that provide all the
needed functionality, HWCompose provides concrete
implementations of it based on the the HWC version.
Change-Id: I40c4676dc986b682ede5520a1c60efe64037b0bb
SF now has its own implementation of ANW for the
framebuffer and it uses BufferQueue. FramebufferNativeWindow
is now only used by stand-alone apps.
Change-Id: Iddeb24087df62bd92b0f78e391dda9b97ddc859c
SurfaceFlinger will no longer directly synchronize with early suspend.
Instead, PowerManagerService will synchronize with SurfaceFlinger to
ensure that a black frame has been drawn on the display, and then
trigger all early suspend handlers.
Change-Id: I07acdd628440d23fdb69db94319ec5d65d3f4919
this optimization didn't improve performance and in fact
seemed to hurt more than anything else. it also made
things a lot more complex as it introduced edges cases
when switching to/from h/w composer.
Change-Id: Iaafc235e175f5740cd98bff914d706e02ab88bb8
Jesse Hall