* Basic tests only. Needs more complicated queue/dequeue tests.
* Also needs consumer-side tests to really be thorough.
Change-Id: I1099dd56d65b6e9dfa15377726d6054ce657c0ca
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
While currently untested, this should allow to move the
BuffereQueue in the consumer process and have everything
work as usual.
Bug: 9265647
Change-Id: I9ca8f099f7c65b9a27b7e7a3643b46d1b58eacfc
we can now queue/dequeue a buffer in asynchrnous mode by using the
async parameter to these calls. async mode is only specified
with those calls (it is not modal anymore).
as a consequence it can only be specified when the buffer count
is not overidden, as error is returned otherwise.
Change-Id: Ic63f4f96f671cb9d65c4cecbcc192615e09a8b6b
we tag queued buffers with the "bufferqueue cannot block" flag
and use that bit to discard a buffer in the queue by new ones
comming in. this allows us to remove the buffer queue drain in
disconnect while maintaining the right behaviour if it gets
connected again (since each buffer remembers how it was enqueued).
Change-Id: I1e703d363a687b70b19ba49cef32213116e8bd3f
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
When acquiring a buffer, SurfaceFlinger now computes the expected
presentation time and passes it to the BufferQueue acquireBuffer()
method. If it's not yet time to display the buffer, acquireBuffer()
returns PRESENT_LATER instead of a buffer.
The current implementation of the expected-present-time computation
uses approximations and guesswork.
Bug 7900302
Change-Id: If9345611c5983a11a811935aaf27d6388a5036f1
Now that we are having separate buffer-instances for the buffer-
queue, we can free all buffers; we don't have to keep the head
alive.
Change-Id: I023e9161a2501d99333f8868ce438afa914ec50f
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
Instead of representing the buffer-queue as a vector of buffer
indices, represent them as a vector of BufferItems (copies).
This allows modifying the buffer slots independent of the queued
buffers.
As part of this change, BufferSlot properties that are only
been relevant in the buffer-queue have been removed.
Also, invalid scalingMode in queueBuffer now returns an error.
ConsumerBase has also changed to allow reuse of the same
buffer slots by different buffers.
Change-Id: If2a698fa142b67c69ad41b8eaca6e127eb3ef75b
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
The C++ class names don't match what the classes do, so rename
ISurfaceTexture to IGraphicBufferProducer, and SurfaceTexture to
GLConsumer.
Bug 7736700
Change-Id: Ia03e468888025b5cae3c0ee1995434515dbea387
Rearranges updateTexImage() so that the SurfaceFlinger-specific
behavior is in a new SurfaceFlingerConsumer subclass.
SurfaceTexture behavior should not be altered. Instead of
acquire-bind-release we now do acquire-release-bind, but since
it's all done with the lock held there shouldn't be any
externally-visible change.
Change-Id: Ia566e4727945e2cfb9359fc6d2a8f8af64d7b7b7
The hints were being set a little too late, so the pre-rotation stuff
wasn't quite working.
Bug 7054997
Change-Id: Id8d5c626db7a76f768ba762a145b315878ee08e6
This change makes BufferQueue derive the min undequeued buffer count from a max
acquired buffer count that is set by the consumer. This value may be set at
any time that a producer is not connected to the BufferQueue rather than at
BufferQueue construction time.
Change-Id: Icf9f1d91ec612a079968ba0a4621deffe48f4e22
This change is a clean up of some of the handling of the maximum number of
buffers that are allowed at once. It mostly renames a few member variables and
methods, but it includes a couple small refactorings.
Change-Id: I9959310f563d09583548d4291e1050a7bbc7d87d
This change refactors the FramebufferSurface class to inherit from the new
ConsumerBase class.
Bug: 6620200
Change-Id: I46ec942ddb019658e3c5e79465548b171b2261f2
ISurfaceTexture::dequeueBuffer now returns the buffer's fence for the
client to wait on. For BufferQueue, this means passing it through
Binder so it can be returned to the SurfaceTextureClient. Now
SurfaceTextureClient is responsible for waiting on the fence in
dequeueBuffer instead of BufferQueue: one step closer to the goal.
Change-Id: I677ae758bcd23acee2d784b8cec11b32cccc196d
After a HWC set, each SurfaceFlinger Layer retrieves the release fence
HWC returned and gives it to the layer's SurfaceTexture. The
SurfaceTexture accumulates the fences into a merged fence until the
next updateTexImage, then passes the merged fence to the BufferQueue
in releaseBuffer.
In a follow-on change, BufferQueue will return the fence along with
the buffer slot in dequeueBuffer. For now, dequeueBuffer waits for the
fence to signal before returning.
The releaseFence default value for BufferQueue::releaseBuffer() is
temporary to avoid transient build breaks with a multi-project
checkin. It'll disappear in the next change.
Change-Id: Iaa9a0d5775235585d9cbf453d3a64623d08013d9
SF now has its own implementation of ANW for the
framebuffer and it uses BufferQueue. FramebufferNativeWindow
is now only used by stand-alone apps.
Change-Id: Iddeb24087df62bd92b0f78e391dda9b97ddc859c
Aimed for use cases where gralloc buffers need to be consumed by CPU
users, such as camera image data streams.
The CpuConsumer is a synchronous queue, which exposes raw pointers to
the underlying graphics buffers to applications. Multiple buffers may
be acquired at once, up to the limit set at time of construction.
Change-Id: If1d99f12471438e95a69696e40685948778055fd
This change adds support for specifying a crop rectangle to a
SurfaceTextureClient that is in post-transformed coordinate space.
Change-Id: I247901de343e71b32850f7ae3bac62dfa612ad3d
Bug: 6299171
This change adds the plumbing to SurfaceTextureClient, BufferQueue, and
SurfaceTexture to get the active rectangle passed to the ANativeWindow to
the buffer consumer.
Change-Id: I35da0889b266327ebb079b6a7136fa3e2e8b00e6
indeed, connect and queueBuffer return the same data, so it's
easier to have them use the same protocol.
Change-Id: I4f9fa3be0a80c9ab0a7a4039b282ae843aab02e1
BufferQueue is now more flexible as it can be used
by SurfaceMediaSource in addition to SurfaceTexture.
Change-Id: I4222be8918d63372c44fcd412d9ad241c6a3eeb9
BufferQueue's disconnect could race with updateTexImage
where invalid buffers could be released. Additionally
fixed similar bug with setBufferCount. Tests were added
to stress the disconnect mechanism.
Change-Id: I9afa4c64f3e025984e8a9e8d924852a71d044716
collapse setCrop, setTransform and setScalingMode to queueBuffer()
this ends up simplifying things quite a bit and reducing the numnber
of IPC needed per frame.
Change-Id: I3a13c07603abe4e76b8251e6380b107fde22e6d9
The DummyConsumer is a consumer that can connect to BufferQueue
that does nothing. It is required as BufferQueue checks
if a consumer is connected. Also fixes a bug where SurfaceTexture
was reusing old texture slots.
Bug: 6172739
Change-Id: I5e7a118dd4d07807ba4c763200242b5ee7d3412b
This change adds a new callback for BufferQueue consumers to be notified
when the BufferQueue frees some or all of its buffers. This is needed
to retain SurfaceTexture behavior where all buffers would be freed when
the producer disconnects. This change also modifies the
SurfaceTextureGLToGLTest.EglDestroySurfaceUnrefsBuffers test to catch
when the buffers are not freed.
The implementation is a little complicated because it needs to avoid
circular sp<> references across what will be a binder interface (so wp<>
can't be used directly). It also needs to avoid the possibility of
locking the BufferQueue and consumer (e.g. SurfaceTexture) mutexes in
the wrong order.
This change also includes a few additional fixes and test cleanups.
Change-Id: I27b77d0af15cb4b135f4b63573f634f5f0da2182
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: I938e63e085128148c58d0e26c7213b30145c109f
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: Iff55e740e36a7f70c9f7a17ee7a5af38e3d21f0f