If available, surfaceflinger will use the hwc setCursorPositionAsync()
api to change the position of supported cursor layers outside of
the usual prepare/set loop.
Change-Id: Ib3fc5c0c390b3489ddbba202379840a1d2748917
Bug: 15116722
- Adds a sticky transform field that can be set from a
SurfaceFlinger client Surface. This transform is
added to any transform applied to the Surface.
Change-Id: Idaa4311dfd027b2d2b8ea5e2c6cba2da5779d753
It turns out that there's no reason to have both I* and Bn* versions
of the createBufferQueue method, so I removed the Bn* version.
Change-Id: I66aeb09e10458ae540ddf1f38d2d0154ea8f315b
- Notify a listener when sideband stream is set
- Mark a layer as visible when sideband stream is set, even though
no buffer is queued.
Change-Id: I9652bf530f2b5ce331533ec1bb3b10a815ca191c
Sideband streams are essentially a device-specific buffer queue that
bypasses the BufferQueue system. They can be used for situations with
hard real-time requirements like high-quality TV and video playback
with A/V sync. A handle to the stream is provided by the source HAL,
and attached to a BufferQueue. The sink HAL can read buffers via the
stream handle rather than acquiring individual buffers from the
BufferQueue.
Change-Id: Ib3f262eddfc520f4bbe3d9b91753ed7dd09d3a9b
Add the ability to ignore layers' transformation matrices during
screenshot capture, which will allow the window manager to capture
unrotated images for recents during the device rotation animation.
Bug: 11805195
Change-Id: I854d87bc84ca06ef9a054a454af1c080ee66fbb8
Moves the "opaque layer" from Layer to Layer::State. This allows
it to be updated as part of a transaction.
Bug 12387406
Change-Id: I0a114ce6adf77cd12fb08f96e0691b76c475768d
we add a flag to ANativeWindow::setBufferTransform that means
"apply the inverse rotation of the display this buffer is displayed
onto to".
Bug: 10804238
Change-Id: Id2447676271950463e8dbcef1b95935c5c3f32b2
This is an attempt at improving the experience of
users with color vision impairement.
At this time this feature can only be enabled for
debugging:
adb shell service call SurfaceFlinger 1014 i32 PARAM
with PARAM:
0 : disabled
1 : protanomaly/protanopia simulation
2 : deuteranomaly/deuteranopia simulation
3 : tritanopia/tritanomaly simulation
11, 12, 13: same as above w/ attempted correction/enhancement
The enhancement algorithm tries to spread the "error"
such that tones that would otherwise appear similar can be
distinguished.
Bug: 9465644
Change-Id: I860f7eed0cb81f54ef9cf24ad78155b6395ade48
specifically when the display size and the screenshot window
size didn't match, the buffer would be rejected.
We simply fix this by setting the scalling mode to
"SCALE_TO_WINDOW".
Bug: 9992306
Change-Id: Ib821767899af330bb70d3cbbfa7d41b02794a075
If a layer is not cropped but its bounds are outside of the
viewport (i.e.: clipped), the crop rectangle passed to
hw composer would be invalid because it started invalid
in the first place (to indicate "no crop").
Bug: 10410944
Change-Id: I4ae4d49a1adef0be7fa4304ecf84b1a5b7d03fe0
the main reason for doing this is so that we can have
access to informations about a texture (like its dimension)
close to where we generate and use shaders in ES 2.0.
Previously, there wasn't any way to get to a texture's size
from a RenderEngine implementation.
Bug: 8679321
Change-Id: I388b338a70d07e3e8177dde248710ea1e4c82dff
the Mesh object can be part of each Layer (at least currently).
also reworked the Mesh code a bit to make it easier to access
the vertex data.
Change-Id: I0490851ba898f0aa2e55b62958dcd8bdb535e98b
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
When acquiring a buffer, SurfaceFlinger now computes the expected
presentation time and passes it to the BufferQueue acquireBuffer()
method. If it's not yet time to display the buffer, acquireBuffer()
returns PRESENT_LATER instead of a buffer.
The current implementation of the expected-present-time computation
uses approximations and guesswork.
Bug 7900302
Change-Id: If9345611c5983a11a811935aaf27d6388a5036f1
When a buffer had a crop (meaning its content is scaled to the window size)
and a window crop was defined, the resulting crop couldn't be expressed
properly because h/w composer's API was limited to integers, since
this is fixed in h/w composer 1.3, we take adventage of this to
make sure we get the correct crop.
this bug could result in the buffer being scaled by an incorrect ratio and
be slightly offset; moreover, it would produce different results from the
GL code path, which is always correct.
Change-Id: I8e20e00b6e26177d14f4ab4d2cd581e26c818892
this is the first step to add support for GLES 2.x, this
change breaks the dependency of SF on GLES 1.x by moving
all operation into their own class.
Bug: 8679321
Change-Id: I0d2741eca2cefe67dfd9cf837cac10c4d126928b
- most methods on Layer didn't need to be virtual
- more consistency in naming drawing/current state
Change-Id: Ieb7b4951b40fc673b807994ed21ae4aea7281068
To keep the code readable now that we have four different texenv
configurations, this change separates the decisions about what
configuration to use from the GL calls to set up the configuration.
Bug: 8963244
Change-Id: Ia07a306a7809ba8f93493d0160ccbd509e948581
until now it was only used to discard a layer entirely.
we're now reducing the size of the layer if it is still
visible, if possible.
this works for instance when a surfaceView is used and
only the menu bar is displayed over it.
Change-Id: I3f5527c5cd1e69ecc968272c8948f1513ada8c55
colorize a bit the output of dumpsys SurfaceFlinger to
make it easier to read. Right now it will bold the
title of each section and use green for the name of
each layer.
Change-Id: I0d9f18d115401cb45109d244ef3a278481f68cc6
this mimics the code we used for the size. basically we need to
also update the "current state" because it gets copied to the
"drawing state" when a transaction occurs, and it would
"undo" our change.
Bug: 8511430
Bug: 8581533
Change-Id: I08c02abbf21b7f168f7124cd14ee717d7d3d502c
since the transparent region hint really depends on the
content of the window containing the SurfaceView
(it's calculated by the view hierarchy based on
overlapping views), it makes sense to latch it only when
the content of the window (the app) changes.
This should help fixing drawing artifacts when changing the
layout of a window containing a SurfaceView.
Bug: 8511430
Change-Id: Ic3aa668495293cb4d82a2cd7dcf3b6a337287678
the purgatory list wasn't needed anymore; in fact it had no effect as
buffer life-time management is now handled by the BufferQueue.
For QueuesToWindowComposer we keep a list of wp<> on the IBinder
for IGraphicBufferProducers we hand over to clients so we can
easily check if an IGraphicBufferProducer is ours. We clean-up the
list when our IGraphicBufferProducer are destroyed.
Bug: 8349142
Change-Id: I1aa06652ade8c72d0004a3f5e6c3d6e8a82fc2ae
ISurface was only used to get the IGraphicBufferProducer from
a Layer. It's now replaced by a BBinder subclass / IBinder and
is only used as a handle to the surface, to both refer to it
and manage its life-time.
Also cleaned-up a bit the ISurfaceComposer interface and
"create layer" code path.
Change-Id: I68d0e02d57b862cffb31d5168c3bc10cea0906eb
The functionality of LayerBase and Layer is folded
into Layer. There wasn't a need for this abstraction
anymore.
Change-Id: I66511c08cc3d89009ba4deabf47e26cd4cfeaefb
