This adds a line to the "dumpsys SurfaceFlinger" output that shows
build-time configuration values.
Example:
Build configuration: [sf HAS_CONTEXT_PRIORITY] [libui] \
[libgui USE_FENCE_SYNC]
Bug 7206633
Change-Id: Ibe1856b459d34a4be6ee83a4ebfd2807e6cc68a0
We used to keep the bounds of the region as a
separate rectangle. Instead we now store it as the last
element of the Vector<> of Rects.
This has the benefit of being slightly more efficient when
copying regions and reduces the overhead of small regions,
but more importantly will allow us to export the underlaying
SharedBuffer (eventually).
Change-Id: I80790e4fb1a09a747a5616000cfef852ac4ce9e9
this change introduces a new class LightFlattenable<> which is
a protocol to flatten simple objects that don't require
binders or file descriptors; the benefit of this protocol is that
it doesn't require the objects to have a virtual table and give us
a consitant way of doing this.
we also introduce an implementation of this protocol for
POD structures, LightFlattenablePod<>.
Parcel has been update to handle this protocol automatically.
Sensor, Rect, Point and Region now use this new protocol.
Change-Id: Icb3ce7fa1d785249eb666f39c2129f2fc143ea4a
After a HWC set, each SurfaceFlinger Layer retrieves the release fence
HWC returned and gives it to the layer's SurfaceTexture. The
SurfaceTexture accumulates the fences into a merged fence until the
next updateTexImage, then passes the merged fence to the BufferQueue
in releaseBuffer.
In a follow-on change, BufferQueue will return the fence along with
the buffer slot in dequeueBuffer. For now, dequeueBuffer waits for the
fence to signal before returning.
The releaseFence default value for BufferQueue::releaseBuffer() is
temporary to avoid transient build breaks with a multi-project
checkin. It'll disappear in the next change.
Change-Id: Iaa9a0d5775235585d9cbf453d3a64623d08013d9
This change updates the uses of ANativeWindow to use the new ANW functions that
accept and return Sync HAL fence file descriptors.
Change-Id: I3ca648b6ac33f7360e86754f924aa072f95242f6
add getBounds(), getWidth(), getHeight(), width() and height()
are kept for backward compatibility.
Change-Id: I83837abf17dc2f8bded1beff73430e8c7d9bbdb3
This change adds a crop rectangle specified in window coordinates to the layer
state. The all window pixels outside this crop rectangle are treated as though
they were fully transparent. This change also adds the plumbing necessary for
WindowManager to set that crop.
Change-Id: I582bc445dc8c97d4c943d4db8d582a6ef5a66081
This change adds a method to Rect to transform a rectangle by a graphics HAL
transform.
Change-Id: Ic0d0988e731bdb5662faee41a5927b1242891658
Bug: 6299171
re-add support for pixelformats L_8, LA_88 and RGB_332 in libui
for backward compatibility.
This may or may not fix 6058926
Bug: 6049685
Change-Id: Ic1b8b4cc994522f7fe664da64c0ef76b98bc6d53
Instead of sending finished signals immediately when appending to
a batch, record the chain of sequence numbers that were part of
the batch and then send finished signals all at once when done.
This change helps the dispatcher keep track of the true state
of the application and can improve ANR detection slightly.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I463c2221e2aa8fdf1c3d670c18e39e59ab69b0db
To support this feature, the input dispatcher now allows input
events to be acknowledged out-of-order. As a result, the
consumer can choose to defer handling an input event from one
device (because it is building a big batch) while continuing
to handle input events from other devices.
The InputEventReceiver now sends a notification when a batch
is pending. The ViewRoot handles this notification by scheduling
a draw on the next sync. When the draw happens, the InputEventReceiver
is instructed to consume all pending batched input events, the
input event queue is fully processed (as much as possible),
and then the ViewRoot performs traversals as usual.
With these changes in place, the input dispatch latency is
consistently less than one frame as long as the application itself
isn't stalled. Input events are delivered to the application
as soon as possible and are handled as soon as possible. In practice,
it is no longer possible for an application to build up a huge
backlog of touch events.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I42c01117eca78f12d66d49a736c1c122346ccd1d
Since we will not longer be modifying events in place, we don't need
to use an ashmem region for input. Simplified the code to instead
use a socket of type SOCK_SEQPACKET.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I05909075ed8b61b93900913e44c6db84857340d8
This adds basic support for clip regions. It is currently disabled at compile
time. Enabling clip regions will require setting up a stencil buffer.
Change-Id: I638616a972276e38737f8ac0633692c3845eaa74
Improved quick launch bookmarks to support category-based shortcuts
instead of hardcoding package and class names for all apps.
Added a set of Intent categories for typical applications on the
platform.
Added support for some of the HID application launch usages to
reduce reliance on quick launch for special purpose keys. Some
keyboard vendors have hardcoded launch keys that synthesize
"Search + X" type key combos. The goal is to encourage them
to stop doing this by implementing more of HID.
Bug: 5674723
Change-Id: I79f1147c65a208efc3f67228c9f0fa5cd050c593
This change makes SurfaceMediaSource add the VIDEO_ENC usage bit when
allocating its GraphicBuffers rather than the HW_TEXTURE bit.
Change-Id: Ie20e225c894fdbc31cad6bb82b3b64c7e98074eb
Stop using system properties to publish information about
the key character map path. Instead, we can retrieve it
on demand by asking the window manager.
It was possible to exhaust the supply of system properties
when repeatedly adding and removing input devices.
Bug: 5532806
Change-Id: Idd361a24ad7db2edc185c8546db7fb05f9c28669
- we want functions like isEmpty() to return true if NANs are
involved in the Rect
- also clean-up the intersect familly of calls
- minor cleanup in the int32_t Rect as well
These played a role in http://b/5331198.
Bug: 5331198
Change-Id: I5369725ab482e4b83da9f1bd4cee5256e5de75b2
Bug: 5265529
Rewrote the velocity tracker to fit a polynomial curve
to pointer movements using least squares linear regression.
The velocity is simply the first derivative of this polynomial.
Clients can also obtain an Estimator that describes the
complete terms of the estimating polynomial including
the coefficient of determination which provides a measure
of the quality of the fit (confidence).
Enhanced PointerLocation to display the movement curve predicted
by the estimator in addition to the velocity vector.
By default, the algorithm computes a 2nd degree (quadratic)
polynomial based on a 100ms recent history horizon.
Change-Id: Id377bef44117fce68fee2c41f90134ce3224d3a1
Bug: 5265529
Calculate the velocity using the most recent touch sample as the
point of reference instead of the oldest. This change more heavily
weights recent touch samples and reduces the sample time window
used for calculation. This significantly improves the accuracy
of fling gesture detection.
Change-Id: Ib1940933e786e5f6a731552a99bcd9400741d55f
This change makes SurfaceFlinger always use the
GRALLOC_USAGE_HW_COMPOSER usage bit when allocating buffers that may be
passed to the HWComposer.
Change-Id: I70362a8ede2b359fb2046853f85149d597465817
Bug: 5049148
Finished stylus support, including support for indirect stylus
and mouse tools.
Added TILT axis. When stylus tilt X/Y is available, it is transformed
into an orientation and tilt inclination which is a more convenient
representation and a simpler extension to the exiting API.
Touch devices now only report touch data using a single input
source. Previously touch devices in pointer mode would report
both absolute touch pad data and cooked pointer gestures.
Now we just pick one. The touch device switches modes as needed
when the focused application enables/disables pointer gestures.
This change greatly simplifies the code and reduces the load
on the input dispatcher.
Fixed an incorrect assumption that the value of ABS_(MT_)DISTANCE
would be zero whenever the stylus was in direct contact. It appears
that the correct way to determine whether the stylus is in direct
contact (rather than hovering) is by checking for a non-zero
reported pressure.
Added code to read the initial state of tool buttons and axis values
when the input devices are initialized or reset. This fixes
problems where the input mapper state might have the wrong initial
state.
Moved responsibility for cancelling pending inputs (keys down,
touches, etc.) to the InputDispatcher by sending it a device reset
notification. This frees the InputReader from having to synthesize
events during reset, which was cumbersome and somewhat brittle
to begin with.
Consolidated more of the common accumulator logic from
SingleTouchInputMapper and MultiTouchInputMapper into
TouchInputMapper.
Improved the PointerLocation output.
Change-Id: I595d3647f7fd7cb1e3eff8b3c76b85043b5fe2f0
Bug: 5064702
Introduced the concept of an InputListener to further decouple
the InputReader from the InputDispatcher. The InputListener
exposes just the minimum interface that the InputReader needs
to communicate with the outside world. The InputReader
passes arguments to the InputListener by reference, which makes
it easy to queue them up.
Consolidated all of the InputReader locks into one simple global
Mutex. The reason this wasn't done before was due to potential
re-entrance in outbound calls to the InputDispatcher. To fix this,
the InputReader now queues up all of the events it wants to send
using a QueuedInputListener, then flushes them outside of the
critical section after all of the event processing is finished.
Removing all of the InputMapper locks greatly simplifies the
implementation.
Added tests for new stylus features such as buttons, tool types,
and hovering.
Added some helpers to BitSet32 to handle common code patterns
like finding the first marked bit and clearing it.
Fixed a bug in VelocityTracker where the wrong pointer trace
could get cleared when handling ACTION_POINTER_DOWN. Oops.
Changed PointerCoords so it no longer stores useless zero
axis values. Removed editAxisValue because it is not very
useful when all zero value axes are absent and therefore
cannot be edited in place.
Added dispatch of stylus hover events.
Added support for distance and tool types.
Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
Adding SurfaceEncoder which can be used to encode
custom frame data. In a sense, it is reverse
of what SurfaceTexture does.
SurfaceEncoder takes in frames from a native window and
passes them to an encoder, thus acting like a MediaSource.
It uses GRAlloc buffers underneath for passing data.
The client side sets the geometry, format in the beginning,
which cannot be changed while the recording is going on.
Currently, there is no common pixel format that both
GRAlloc and HAL understand.
Also, the encoder cannot encode using the data from the GRAlloc
buffers.
The SurfaceEncoder_test examines mainly the buffer passage
since true encoding cannot be done at this point.
SimpleDummyRecorder 'reads' the frames in the same thread
as the start(), whereas DummyRecorder 'reads' in a separate
thread much like the MPEG4Writer. The test with DummyRecorder
is much closer to the real encoding implementation.
Related to bug id: 4529323
Change-Id: I58ec19a150f8fe4d6195196dc44f55002b46c7c8
Bug: 4364920
Velocity damping proved to be a bad idea because it would
cause a significant ramp in velocity at the beginning of
a gesture, instead of the desired smooth behavior. Oh well.
Change-Id: Ie631946f47ef2492bd71fbed1ab44bbb39a875a8
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: Ib647dbd7a57a7f30dd9c6e2c260df51d7bbdd18e
Replaced VelocityTracker with a faster and more accurate
native implementation. This avoids the duplicate maintenance
overhead of having two implementations.
The new algorithm requires that the sample duration be at least
10ms in order to contribute to the velocity calculation. This
ensures that the velocity is not severely overestimated when
samples arrive in bursts.
The new algorithm computes the exponentially weighted moving
average using weights based on the relative duration of successive
sample periods.
The new algorithm is also more careful about how it handles
individual pointers going down or up and their effects on the
collected movement traces. The intent is to preserve the last
known velocity of pointers as they go up while also ensuring
that other motion samples do not count twice in that case.
Bug: 4086785
Change-Id: I95054102397c4b6a9076dc6a0fc841b4beec7920
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I7b7ddacc724fb1306e1590dbaebb740d3130d7cd
Added the concept of pointer properties in a MotionEvent.
This is currently used to track the pointer tool type to enable
applications to distinguish finger touches from a stylus.
Button states are also reported to application as part of touch events.
There are no new actions for detecting changes in button states.
The application should instead query the button state from the
MotionEvent and take appropriate action as needed.
A good time to check the button state is on ACTION_DOWN.
As a side-effect, applications that do not support multiple buttons
will treat primary, secondary and tertiary buttons identically
for all touch events.
The back button on the mouse is mapped to KEYCODE_BACK
and the forward button is mapped to KEYCODE_FORWARD.
Added basic plumbing for the secondary mouse button to invoke
the context menu, particularly in lists.
Added clamp and split methods on MotionEvent to take care of
common filtering operations so we don't have them scattered
in multiple places across the framework.
Bug: 4260011
Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
