This change fixes a number of small glitches that can occur when
multiple components in the same process are updating surfaces.
One would expect that updates to disjoint sets of surfaces would
not collide but this is not the case. The first component to
close the global transaction causes all pending updates to
be applied, including those that another component might not
have finished setting up if it also had an open transaction
at the same time.
Change-Id: I99345958581abbe0e1e325a5bcba37e8941a313a
This change adds support for displays that are not allowed to display surfaces
with the eSecure flag set. All non-virtual displays are considered secure,
while virtual displays have their secure-ness specified at creation time.
Bug: 7368436
Change-Id: I81ad535d2d1e5a7ff78269017e85b111f0098500
This change adds a transaction flag for WindowManager to indicate that a
transaction is being used to animate windows around the screen. SurfaceFlinger
will not allow more than one of these transactions to be outstanding at a time
to prevent the animation "frames" from being dropped.
Bug: 7353840
Change-Id: I6488a6e0e1ed13d27356d2203c9dc766dc6b1759
This change makes BufferQueue::dequeueBuffer release its mutex before
allocating new buffers. This should alleviate lock contention in
SurfaceFlinger where SF's main thread can get blocked waiting for an allocation
operation to complete.
Bug: 7335075
Change-Id: I1b000539cc616a695afab2e9c68507db69e57b13
This needs the ConsumerBase mutex locked, but wasn't locking it. Two
of the four places that called it already held the lock so were fine.
Now addReleaseFence() takes the lock itself, and I added
addReleaseFenceLocked() for the two already-locked callers, since in
one of them dropping the lock would be inconvenient.
Bug: 7289269
Change-Id: I7a5628adb516f8eec782aa6c14128202f96d7b0a
The CleanSpec is missing parens, which causes $P to be interpreted as a
single variable, and the following printed to the log:
Clean step: rm -rf RODUCT_OUT/obj/SHARED_LIBRARIES/libgui_intermediates
This patch adds parens as needed.
Change-Id: I587998fa67a4884418c286360a577cdbb6ea9a21
This change adds debug info to SurfaceFlinger's dumpsys to indicate that the
USE_WAIT_SYNC compile option was enabled, and it removes the
ALLOW_DEQUEUE_CURRENT_BUFFER option.
Bug: 7238122
Change-Id: I70e08e34c2ef58aa6d2f88229e781a119f84b5a9
This allows us to blank and unblank displays other than the built-in
display (e.g. HDMI).
Bug: 7240511
Change-Id: I89ea13f9e497be74c3e1231d0c62fb558e93e0f8
This adds a line to the "dumpsys SurfaceFlinger" output that shows
build-time configuration values.
Example:
Build configuration: [sf HAS_CONTEXT_PRIORITY] [libui] \
[libgui USE_FENCE_SYNC]
Bug 7206633
Change-Id: Ibe1856b459d34a4be6ee83a4ebfd2807e6cc68a0
This change fixes an issue causing the mEglContext member of a SurfaceTexture
to get incorrectly zeroed out. This would happen when a call to
ConsumerBase::releaseBufferLocked resulted in the current buffer being freed.
Freeing the current buffer would set SurfaceTexture::mCurrentTexture to -1,
which would then be used by SurfaceTexture::releaseBufferLocked to reset the
current slot's EGLSyncKHR to EGL_NO_SYNC_KHR (= 0). This would overwrite the
mEglContext field, resulting in context mismatch errors in
SurfaceTexture::doGLFenceWaitLocked.
The fix is to simply use the buffer slot that's passed in to
SurfaceTexture::releaseBufferLocked rather than mCurrentTexture.
Change-Id: I0e5e2bd88fcbb354c35a3744f317716fff3e0e41
This change makes updateTexImage default to performing the necessary
synchronization and adds an argument for SurfaceFlinger to disable that
synchronization so that it can be performed lazily.
Change-Id: I7c20923cc786634126fbf7021c9d2541aa77be5d
Bug: 6991805
The Surface createDisplay() call takes a display name for debugging.
This change carries it through SurfaceFlinger and displays it in
the "dumpsys SurfaceFlinger" output.
Bug 7058158
Change-Id: I79f3474a8656ff1beb7b478e0dbf2c5de666118a
The hints were being set a little too late, so the pre-rotation stuff
wasn't quite working.
Bug 7054997
Change-Id: Id8d5c626db7a76f768ba762a145b315878ee08e6
This change adds a call to eglDestroySync after we've dup'd the fd for the
Android fence that the EGLSyncKHR object wraps.
Change-Id: I4fa6ece863260793630d70bb9a69d6284d05d99e
This change adds a compile-option to use eglWaitSyncANDROID to ensure that
texturing operations that access the current buffer of a SurfaceTexture do not
occur until the buffer is completely written. It also moves this
synchronization into a new SurfaceTexture method called doGLFenceWait and
changes SurfaceFlinger's Layer class to use that method rather than performing
its own wait on the fence.
Change-Id: I70afa88086ca7ff49a80e3cd03d423767db7cb88
This change adds support for using Android fences that come from EGLSyncKHR
objects as the release fence for a buffer.
Change-Id: Ice192ce2ec001020f909a2018afdf0f17b24dec9
The ComposerService object wasn't watching for SurfaceFlinger
restarts, which doesn't usually matter because the app framework
restarts when SurfaceFlinger dies. However, mediaserver continues
to run, which means its ComposerService object was trying to use
a dead handle, and playback of DRM movies was failing.
This adds a DeathRecipient listener and some logic to re-establish
the SurfaceFlinger connection.
Bug 6645813
Change-Id: I07581b881d3835601aa57d5358c8259d93bc4515
This change moves some common fence handling code into the base class for
BufferQueue consumer classes. It also makes the ConsumerBase class initialize
a buffer slot's fence with the acquire fence every time a buffer is acquired.
Change-Id: I0bd88bc269e919653b659bfb3ebfb04dd61692a0
This change adds some infrastructure for testing the BufferQueue class. It
also includes a test that tests the new check in BufferQueue::acquireBuffer
that prevents the consumer from acquiring more than one buffer beyond the max
acquired buffer count that was set.
Change-Id: I38554ad3f9a53d2ddeba7ef0deee35ec2e2f9775
This change disables the CpuConsumer tests because they require a Gralloc
format that is not supported on all devices.
Change-Id: Ifaa618062c1dae53d9fcb9e16ba92c480d3dbd0c
This change adds an error check to ensure that consumers don't acquire more
buffers than the maximum that they set.
Change-Id: I026643564bde52732e4ee6146972b207ddbbba77
This change makes BufferQueue derive the min undequeued buffer count from a max
acquired buffer count that is set by the consumer. This value may be set at
any time that a producer is not connected to the BufferQueue rather than at
BufferQueue construction time.
Change-Id: Icf9f1d91ec612a079968ba0a4621deffe48f4e22
This change is a clean up of some of the handling of the maximum number of
buffers that are allowed at once. It mostly renames a few member variables and
methods, but it includes a couple small refactorings.
Change-Id: I9959310f563d09583548d4291e1050a7bbc7d87d
This is a compatibility shim for one product whose drivers
are depending on SurfaceComposerClient::getDisplayInfo(
int, DisplayInfo*) when it really shouldn't.
Revert this patch when the problem has been resolved.
Bug: 7065398
Change-Id: I6542691b81fd1b1e1d79500a62e82d40a3d51db7
Use only display tokens in the API to refer to new displays.
Don't require the caller to specify the display when creating
a surface (since in general a surface could be shown on
any display).
This is intended to be a minimum change just to update the API.
Note that SurfaceFlinger still uses DisplayID in a few places
internally that might cause some features not to work properly
when there are multiple displays (LayerScreenshot, for example).
Change-Id: I3d91eec2da406eefd97bcd53655d403ad865a7e6
This change makes SurfaceTexture inherit from ConsumerBase. It removes all of
the functionality from SurfaceTexture that is now provided by the base class.
This includes fixes for two bugs that were found after checking this change in
the first time and then reverting it.
Change-Id: Ie2d9f4f27cfef26fdac341de3152e842b01a58d2
BufferItemConsumer allows for acquiring BufferQueue's BufferItems,
which contain all the data and metadata the BufferQueue has for a
given graphics buffer.
This consumer is useful when direct access to the native buffer_handles
is needed by the client.
Also includes a minor cleanup of CpuConsumer's use of 'virtual'.
Bug: 6243944
Change-Id: If7dc4192b15ac499555f1eda42a85140f2434795
