This allows querying and switching display device configurations
through the ISurfaceComposer/SurfaceComposerClient interface.
Bug: 14320401
Change-Id: I8c22165698950e5da32204c1c4da92122f91a715
The gralloc API now provides a way for using lock/unlock with the Android
explicit synchronisation concept. This changes updates the GraphicBuffer class
to also expose this functionality, and updates the Surface class to make use of
in line with the dequeueBuffer/queueBuffer mechanism.
This new behaviour is dependent on GRALLOC_MODULE_API_VERSION_0_3. If the local
gralloc module does not support this then the existing synchronous lock/unlock
mechanism will be used.
Change-Id: I77daa1beb197b63b1c2f281b8414ac4ae4b5b03c
SensorService should hold a wakelock till the app reads events from a wakeup sensor. Currently drivers hold a wakelock with a
timeout while delivering events from a wake up sensor like Significant Motion. This hack can be removed now.
Bug: 9774884
Change-Id: If3b5acb99c9cf0cd29012fcfa9d6b04c74133d01
Finally remove the BufferQueue constructor itself. From now on, all
BufferQueues must be created through the createBufferQueue method.
Bug: 13415624
Change-Id: I192bf9430265bab761dcd59db1f02c9d0ac4feed
Adds logic to dequeueBuffer that blocks if there are currently too
many buffers in the queue. This prevents unbounded growth around
times where the slots are cleared but the queue is not (e.g.,
during rapid connect/disconnect or setBufferCount activity). This
replaces the fix from ag/377958 in a more general way.
Bug: 11293214
Change-Id: Ieb7adfcd076ff7ffe3d4d369397b2c29cf5099c3
Increases NUM_BUFFER_SLOTS from 32 to 64 and changes the mask
returned by IGBC::getReleasedBuffers from 32 to 64 bits.
Bug: 13174352
Change-Id: Ie8ef0853916cfb91f83881c7241886bb1950f01a
Adds a StreamSplitter class, that takes one IGraphicBufferConsumer
interface and multiple IGraphicBufferProducer interfaces and
implements a one-to-many broadcast of GraphicBuffers (while managing
fences correctly).
Change-Id: I38ecdf3e311ac521bc781c30dde0cc382a4376a3
Adds a new method, IGBP::detachNextBuffer, that effectively does
dequeue + request + detach in a single call, but does not need to
know anything about the dequeued buffer, and will not block on
dequeue. This is mostly for the upcoming StreamSplitter to use in
its onBufferReleased callback.
Change-Id: Ie88a69de109003acebaa486a5b44c8a455726550
* commit 'ef89f7638c43ce5f73e32d487bf65c3375995e3b':
Add stringType and requiredPermission to sensors, effectively adding permission checking for sensors
* commit 'cf818ebbf07c6a20ef48d71bf82f8d4bdf3a398c':
Add stringType and requiredPermission to sensors, effectively adding permission checking for sensors
There are a number of places where we create a local
sp<SurfaceComposerClient>& to something that is already an
sp<SurfaceComposerClient>, which is redundant. This fixes that
by removing the local references.
Bug: 13814149
Change-Id: Ic558cbda651c344e5cac97022c97563928eed29c
It turns out that there's no reason to have both I* and Bn* versions
of the createBufferQueue method, so I removed the Bn* version.
Change-Id: I66aeb09e10458ae540ddf1f38d2d0154ea8f315b
- Notify a listener when sideband stream is set
- Mark a layer as visible when sideband stream is set, even though
no buffer is queued.
Change-Id: I9652bf530f2b5ce331533ec1bb3b10a815ca191c
* commit '00f4dde1aa88576811bca79bc8242e1fc1edb333':
Add stringType and requiredPermission to sensors, effectively adding permission checking for sensors
* commit 'c57a019e117117c5a76c772970b26cd0f5db8c6a':
Add stringType and requiredPermission to sensors, effectively adding permission checking for sensors
In GLConsumer's updateAndReleaseLocked(), we must release either
the previously-acquired buffer or the newly-acquired buffer.
Bug 13755224
Change-Id: I96adc255400ed008ba6e6ac1725ab3514c7cc8ba
Add a callback to the producer side, onBufferReleased, which will be
called every time the consumer releases a buffer back to the
BufferQueue. This will enable a buffer stream splitter to work
autonomously without having to block on dequeueBuffer.
The binder object used for the callback replaces the generic IBinder
token that was passed into IGraphicBufferProducer::connect to detect
the death of the producer. If a producer does not wish to listen for
buffer release events, it can pass in an instance of the
DummyProducerListener class defined in IProducerListener.h, if it even
cares about death events (BufferQueue doesn't enforce the token being
non-NULL, though perhaps we should).
Change-Id: I23935760673524abeafea2b58dccc3583b368710
When a buffer is attached to the producer side, it needs to be marked
as having been requested so that it can be queued successfully.
Change-Id: I90a88b332c415a57921bd094ae635afdf65bff99
Adds a test that puts the BufferQueue into its own process and
connects to it over remote binder interfaces. This exposed the fact
that while IGBC was technically binderized, it didn't actually work
when flattened, so this change also fixes that.
Change-Id: I728cdb662a4273ddd3440ed6040a12560313fe68
This adds a second createBufferQueue method that returns
sp<IGraphicBuffer*> interfaces instead of sp<BnGraphicBuffer*>, since
most clients don't actually need the Binderized versions (but some
might).
Change-Id: Iaf4f719c96ddb6f704afc75cf52be22588173e32
Sideband streams are essentially a device-specific buffer queue that
bypasses the BufferQueue system. They can be used for situations with
hard real-time requirements like high-quality TV and video playback
with A/V sync. A handle to the stream is provided by the source HAL,
and attached to a BufferQueue. The sink HAL can read buffers via the
stream handle rather than acquiring individual buffers from the
BufferQueue.
Change-Id: Ib3f262eddfc520f4bbe3d9b91753ed7dd09d3a9b
Adds detachBuffer and attachBuffer calls to both the producer and
consumer sides of BufferQueue. Buffers may be detached while dequeued
by the producer or acquired by the consumer, and when attached, enter
the dequeued and acquired states, respectively.
Bug: 13173343
Change-Id: Ic152692b0a94d99e0135b9bfa62747dab2a54220
Now that BufferQueue has been split into core + producer + consumer,
rewrite BufferQueue to be a thin layer over a producer and consumer
interface. Eventually, this layer will be deprecated in favor of
only using either the producer or consumer interface, as applicable.
Change-Id: I340ae5f5b633b244fb594615ff52ba50b9e2f7e4
- This also fixes a hang in the camera service when trying to shut down
if the producer is infinitely blocked while trying to get a new buffer.
Bug: 13250382
Change-Id: I32ca82162bb8645b97dbe084e13e05ca05529a42
Moves the "opaque layer" from Layer to Layer::State. This allows
it to be updated as part of a transaction.
Bug 12387406
Change-Id: I0a114ce6adf77cd12fb08f96e0691b76c475768d
Add the ability to ignore layers' transformation matrices during
screenshot capture, which will allow the window manager to capture
unrotated images for recents during the device rotation animation.
Bug: 11805195
Change-Id: I854d87bc84ca06ef9a054a454af1c080ee66fbb8
Moves the "opaque layer" from Layer to Layer::State. This allows
it to be updated as part of a transaction.
Bug 12387406
Change-Id: I0a114ce6adf77cd12fb08f96e0691b76c475768d
Add SRGBTest.RenderToSRGBSurface, which validates that passing the
SRGB colorspace attributes to eglCreateWindowSurface actually
results in an SRGB surface by comparing the output values to those
of a standard RGB surface.
Change-Id: I3d5fef8070ed8fa2357ddd1c5fcc849ae3fbd12a
Extract the many different test fixtures and suites in SurfaceTexture_test.cpp
into separate files. No real functional changes, just tweaking headers to keep
things building (and adding a few copyright headers I forgot last time).
Change-Id: Id801bd5d617f0cc61d22508fb9b71b41694bdecf
The CpuConsumer error code was changed recently from INVALID_OPERATION to
NOT_ENOUGH_DATA, however the CpuConsumer_test was not updated. This change
fixes the return code checked by CpuConsumer_test so the test no longer
fails.
Change-Id: Ie548ddcb313fa34c130ac63355090cb44ac15ebf
* Basic tests only. Needs more complicated queue/dequeue tests.
* Also needs consumer-side tests to really be thorough.
Change-Id: I1099dd56d65b6e9dfa15377726d6054ce657c0ca
When a BufferQueue producer disconnects and reconnects, we retain
the previously-queued buffers but empty the slots. This allows
the number of queued buffers to grow without limit. The low-memory
killer does not approve.
Bug 11069934
Change-Id: Ia2eaa954c7a3904b54209a3701dba01689e204d8
* commit '1f1e576840d5b36a091368abb6fe6610384b6449':
Change API from flush(handle) to flush(). Call flush on all active sensors in the given SensorEventConnection.
* commit '5d6aa95129a13aae37a60b3e4246a0592dab396d':
Change API from flush(handle) to flush(). Call flush on all active sensors in the given SensorEventConnection.
This change makes GLConsumer use the EGL_ANDROID_image_crop extension when
available on a device. The crop rectangle is passed to the EGL driver when
creating EGLImages, allowing the crop to be performed by the driver rather than
using the texture transform matrix.
Bug: 10897141
Change-Id: I63e9a5d5c85067376abc420e3639154468346311
