This change removes support for conditionally using the GL_TEXTURE_2D
target for SurfaceTexture textures with RGB buffers. It also enables
and fixes the RGB-based SurfaceTexture tests.
Change-Id: I9a251a981cf66af6b048b2e4c3fe7231e4774f4d
This change adds the 'abandon' method to the SurfaceTexture C++ class.
This method may be used to put the SurfaceTexture in an abandoned state,
causing all ISurfaceTexture methods to fail.
Change-Id: Ibd261f7b73f44e2bec36a8508bf92113cfb7cf95
This change adds a test to ensure that a GL driver that's blocking on a
call to dequeueBuffer does not block other GL threads from rendering and
queueing buffers.
Change-Id: Ifdd234effc534b6a9cf8522ca87f64da5bb0bbd6
This change fixes a couple different issues in the
SurfaceTextureGLToGLTest test fixture:
- incorrect use of conditions
- move logging after the locks are acquired
- call the parent class's TearDown method
- clean up the SurfaceTexture before eglTerminate gets called
Change-Id: I6960e5ab7f144225f01a2089d3f849c99fed0b38
This change enables the following four SurfaceTextures tests:
UpdateTexImageBeforeFrameFinishedWorks
UpdateTexImageAfterFrameFinishedWorks
RepeatedUpdateTexImageBeforeFrameFinishedWorks
RepeatedUpdateTexImageAfterFrameFinishedWorks
Change-Id: I7632630bc97873e50d4a765ffc44a86f16ae62f1
- put the test window at the front most screen position
- use RGBA_8888 which is a mandatory format
- handle devices that don't support the protected usage flags
Bug: 4950464
Change-Id: I0005fb667cfe094e5978816e2924b294c5ef817e
This change adds a test to verify that proper synchronization is done
when using SurfaceTexture to use CPU generated images as OpenGL ES
textures in 'synchronous mode'. Synchronous mode is particularly tricky
because SurfaceTexture will allow the buffer that's currently bound to
the GL texture to be dequeued. We rely on Gralloc's lock function to
block until this buffer is no longer being used by the OpenGL ES.
Change-Id: I1c4e37f3e9d60ab9a0905a90a1f5060fda8e485c
This change makes the SurfaceTexture GL tests use a large (512x512)
framebuffer. The tests now use glViewport to render to a region of the
framebuffer with a size matching that of the texture being drawn. The
Npot test pixel checks must be changed because now the rendered region
is the same size as the texture.
Change-Id: Icc41803189c25e33ba1da7d2470720f0a11f3e4b
This change increases the Surface layer used for displaying the test
results so that the tests will be visible over other windows in the
system.
Change-Id: I47f147f8743ff2a39d57d551811668371202bd31
This change adds a test to verify that querying the format of a
SurfaceTextureClient immediately after setting it returns the correct
result. The test is currently disabled because it does not pass.
Change-Id: I5bddb39c5bf96d6104624094383d410ed913e9f3
This change disables the UpdateTexImageAfterFrameFinishedWorks test
because it's currently causing deadlocks on some devices.
Change-Id: Ic9186db207e8d656f3af5d86fa138c7d96393c55
This change adds a default tolerance of 2 to all the pixel value checks
in the SurfaceTexture tests.
Change-Id: Id5a7cdffdfae16076e2daf4964a3326105b5ae2c
This change adds some tests to verify streaming images from one GL
thread to another via SurfaceTexture. Currently the tests do not
validate the correctness of the streamed images, but rather simply
verify that this streaming does not cause a deadlock. 3 of the 4 tests
are currently disabled because they do cause deadlocks on some devices.
Change-Id: I5677942053190063b97f370dba96c116711bc3bb
This change adds a test verifying that with no transform set on the
SurfaceTextureClient, the SurfaceTexture will return an identity
transform matrix. It also verifies this same effect in the presence of
an additional call to native_window_set_buffer_count just before the
call to getTransformMatrix.
Bug: 4490420
Change-Id: Ic5adfa29b5696cc2b451433834e3758ef20c5edd
The SurfaceTextureSyncModeWaitRetire test was disabled. It is failing
because of the synchronization hacks that were added to SurfaceTexture
to work around bugs in vendor device drivers.
Change-Id: I09a74538bfe14a04833acb6847471e00826cc7fc
This change fixes the MIN_UNDEQUEUED_BUFFERS error check in
dequeueBuffer. The check should only be performed if a buffer has been
queued since the last time the buffer count was changed by the client.
The check must be applied conditionally because video decoders require
all the bufferes to be dequeued and registered before beginning the
decode.
Change-Id: I08d96b380544e395c2fcf0f3983a199bfd695b09
This change fixes up some stale comments, member variable names, log
messages and disables a failing test.
Change-Id: Ic1d3344b18066cf710e4a42838b2417c6b1f2f6c
This change makes the libgui makefile recurse into the tests directory
so that the tests get built by a top-level make when
TARGET_BUILD_VARIANT=tests.
Change-Id: I6f623cc4b86dfeb00b9d21823316dbd9def23110
This change removes the check that disallowed the creation of an
EGLSurface that would send frames to a SurfaceTexture.
Change-Id: I44c6d5df503cc676a88144d72d39b414692ce4c9
SurfaceTexture now has the concept of default size a new method,
setDefaultBufferSize() to set it. When the default size is
changed, dequeueBuffer() will return a value telling the
client that it must ask for a new buffer.
The above only applies if the client has not
overriden the buffer size with setGeometry.
Change-Id: I520dc40363054b7e37fdb67d6a2e7bce70326e81
this is the first step in unifying surfacetexture and surface.
for this reason the header files were not moved, as most of them
will eventually go away.
NOTE: currently we keep libsurfaceflinger_client.so as an empty
library to workaround prebuilt binaries wrongly linking against
it.
Change-Id: I130f0de2428e8579033dc41394d093f4e1431a00
This change makes the ANativeWindow_lock NDK function error out if it is
passed an ANativeWindow with a concrete type that is not Surface. It
also makes eglCreateWindowSurface fail if it is passed a
SurfaceTextureClient as its 'window' argument.
Bug: 4087277
Change-Id: Ie68c50c52d88f72d8a387f6c094908044c83a88c
This change adds a getter method to SurfaceTextureClient to get the
ISurfaceTexture object with which the SurfaceTextureClient is
communicating.
Bug: 4086509
Change-Id: Ifec621e0fe5392a5be56b2348fdc54067cbebcdd
This change adds a query to the ANativeWindow interface for getting the
concrete type of the ANativeWindow.
Bug: 4086509
Change-Id: I64aa86d72fbca3b52a98e1fc35608737781a3178
This change fixes the transform matrix computation in SurfaceTexture
when a crop rectangle is specified by the image producer. It also adds
a test for this case as well as a basic test for the uncropped case.
Bug: 4070775
Change-Id: I1481c9ce9d08fe7f2bff86d3afdeab7d4002b157
This change adds a new 'method' to the ANativeWindow interface to check
whether buffers queued to the window will be sent directly to the system
window compositor.
Change-Id: I4d4b199e328c110b68b250029aea650f03c8724d
Bug: 3495535
