Display configs for external displays are stored in the framework
everytime we receive a hot plug to connect. However, since the
configs are not cleared on disconnect, framework will just assume
that the configs are valid. This does not work for use cases when
you connect/disconnect external displays with different resolutions.
e.g. 1080p to 4K and vice-versa
With this change we clear the display configs and repopulate when
we receive a hot plug to connect.
Change-Id: I2eeab186a8d8668a53390a2413b2ce5e044a1845
Acked-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
By not committing the results of composition for empty frames, we
avoid spitting out series of black frames for virtual displays that
don't have visible layers. We still draw one black frame when going
from having layers to not having any. In particular, this avoids
having a series of empty frames due to re-compositing the primary
display in the period between creating the virtual display and adding
layers to it.
Bug: 16786752
Change-Id: I7e9b2ed2e407d8d49c7af736b447d4c6181b0ad8
Do not wait for the screen capture to complete within surface flinger,
instead pass a sync point back with the captured gralloc buffer.
Change-Id: I7137c0e0fc710688d1d61f189159418fb27ea263
1) Flush should only be received by the app calling flush(). Maintain
a queue of all flush() calls and send flush_complete events in that
order.
2) Log warnings for older HALs. Remove batch() calls with DRY_RUN flag.
3) Reallocate event cache when more sensors register and the desired
maxCacheSize increases. Clear NEEDS_ACK flag in the buffer whenever
there is a write() failure.
4) More dump information. Add wake-up flag, maxDelay and timestamps for
sensor events.
Bug: 16874778
Change-Id: I195646191059fd31f75f2f07886c0f98bf9b509a
Modify SurfaceFlinger to use VirtualDisplaySurface in all cases when a virtual
display is used. Add functionality in VirtualDisplaySurface to resize the
buffers aquired in the QueueBufferOutput. Add transaction support in
SurfaceFlinger for resize. Add the modification of the size in DisplayDevice.
Change-Id: Iae7e3556dc06fd18d470adbbd76f7255f6e6dd6b
Tested: None
This can be used to change the current display mode of the device.
Change-Id: Icdc3fb58389b861dc77b68102083da6f7a96eccb
Tested: None
(cherry picked from commit 2651fa9463)
If available, surfaceflinger will use the hwc setCursorPositionAsync()
api to change the position of supported cursor layers outside of
the usual prepare/set loop.
Change-Id: Ib3fc5c0c390b3489ddbba202379840a1d2748917
i) Send ack for wake_up sensors on the socket connection instead of using Binder RPC.
ii) Cache events per connection in case there are write failures. Compute cache size
from FIFO counts of sensors.
iii) Send FlushCompleteEvent only for apps that explicitly called flush().
Change-Id: I018969736b7794b1b930529586f2294a03ee8667
Bug: 15116722
- Adds a sticky transform field that can be set from a
SurfaceFlinger client Surface. This transform is
added to any transform applied to the Surface.
Change-Id: Idaa4311dfd027b2d2b8ea5e2c6cba2da5779d753
The existing code worked in practice, but wasn't quite correct in
theory and relied on implementation details of other code. It's still
somewhat unusual and subtle, but now is correct-in-theory (I believe)
and a little better documented.
Bug: 16044767
Change-Id: I22b01d6640f0b7beca7cbfc74981795a3218b064
(cherry picked from commit c61576794e)
This is necessary to use C11/C++11 stdlib atomics, which the next
change will do. This change also fixes a couple bits of syntax that
both GCC and Clang refuse to compile in -std=c++11 mode.
Change-Id: Ia14d9d6b537a3bb106c23e19a277e48be180754c
This forces all SurfaceFlinger sources to be recompiled when the
Makefile changes; that's overkill sometimes but makes sure everything
gets recompiled when compile options (or similar) changes.
Change-Id: I2b3c3090fc1c35078e13c77fbb1a78d447c39158
Removes the dependency on default constructor parameters for
GLConsumer so that a different constructor prototype can safely be
added.
Change-Id: I0da924bbd4c141edbf305598c1be8bc575654680
This adds an allocateBuffers method to BufferQueue, which instructs
it to allocate up to the maximum number of buffers allowed by the
current configuration. The goal is that this method can be called
ahead of render time, which will prevent dequeueBuffers from blocking
in allocation and inducing jank.
This interface is also plumbed up to the native Surface (and, in
another change, up to the Java Surface and ThreadedRenderer).
Bug: 11792166
Change-Id: I4aa96b4351ea1c95ed5db228ca3ef98303229c74
VSYNC power hints are now sent via binder to IPowerManager.
SurfaceFlinger no longer loads a second copy of the PowerHAL.
VSYNC power hints are sent in batches and not on per frame basis.
Change-Id: Ia5a839ab3c857cffae7089f810b4315d4ed23fcf
Rects' right and bottom edges are treated as exclusive, so when
checking against maximum width and height, we should use > instead
of >=.
Change-Id: Ifcdf6813c13fcab1a55f16c21064e765e93d49f0
This replaces the previous low-power mode experiment, which
discarded refresh events, with a new experiment that alters
the refresh period.
(see also I2849e5ea335c0d2509fea1c315392bce7f20451d )
The feature is enabled by specifying a nonzero value for the
"refresh skip count", which indicates the number of periods
to skip. For example, the command:
adb shell service call SurfaceFlinger 1016 i32 1
sets a skip count of '1', yielding a 30Hz refresh rate on a device
with a 60Hz display. Changing the last value to '2' would set the
refresh to 20Hz. '0' returns to the default behavior.
Bug 15523257
Change-Id: I00039c22a55750e74035644c63800e4bee1c774a
If app and SF events aren't using phase offsets, we don't need
to maintain the DispSync model. We just turn hardware VSYNC on
whenever something wants to draw. This avoids some edge cases
where we were doing too much resync work.
Also, updated the systrace output. The "VsyncOn" line was a
combination of SF and app event threads, and would occasionally
be very weird. Removed VsyncOn, renamed VSYNC to VSYNC-app,
and added VSYNC-sf.
Also, added more details to the --dispsync dumpsys output.
Also, renamed global constants to not look like local variables.
Bug 15516453
Change-Id: I0da10b72f0d9a7b7eb5202d87cc18967f698adbd
We replace the blank/unblank calls in surfaceFlinger with a more generic
setPowerMode() routine.
Some displays support different power modes (for example, with reduced
color palettes). Depending on the use case we should be able to toggle
these modes, so as to achieve incremental power savings.
Initially, three power modes will be supported:
- HWC_POWER_MODE_OFF
- HWC_POWER_MODE_DOZE
- HWC_POWER_MODE_NORMAL
HWC_POWER_MODE_OFF will correspond to blanking the display, while
HWC_POWER_MODE_NORMAL will correspond to unblanking. HWC_POWER_MODE_DOZE
will put the display into a low power setting, if it is supported in
hardware.
If such a low power mode is not supported, it should be treated as a
call to set the mode to HWC_POWER_MODE_NORMAL.
As a consequence of adding the mPowerMode field, the mScreenAcquired is
no longer required, and thus references to it are removed and replaced
equivalent references to mPowerMode.
We also add the glue code to connect the services invocation of setting
a power mode and the HAL implementation in HWComposer.
Bug: 13472578
Change-Id: I431595ecf16d2f2c94259272db3dd42f29636204
Signed-off-by: Prashant Malani <pmalani@google.com>
Adds a sourceCrop Rect parameter to screenshot commands, which allows
clients to capture only a portion of the screen instead of the whole
screen.
Bug: 15137922
Change-Id: I629447573cd34ffb96334cde7ba02490b9ea06d8
The "dumpsys SurfaceFlinger" output shows pixel formats in
human-readable form now. Add IMPLEMENTATION_DEFINED.
Change-Id: If567e34dad4b940fbfb4d0b70c65f6ab8cd5f5e7
Dumps the current DispSync state.
Bug 14651879
(this is a near-cherrypick of Ide4e6dbd58b117bc1a6b97b57d10cd92ec86dc84)
Change-Id: I6e6c8452ede5c2d5098db1b884d28226e77d9a03
This allows querying and switching display device configurations
through the ISurfaceComposer/SurfaceComposerClient interface.
Bug: 14320401
Change-Id: I8c22165698950e5da32204c1c4da92122f91a715
This ensures it's the same size in both 32 and 64 bit
processes and also brings it in line with struct
MotionEntry.
Change-Id: I66bb8b8d8664763e7dcbd489686051f563d5e1dc
the default.
Feature added for the low power mode.
Change-Id: I2849e5ea335c0d2509fea1c315392bce7f20451d
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
If the virtual display consumer disconnects after the
VirtualDisplaySurface dequeues a buffer but before it requests it, the
request will fail. Previously the error was ignored, and the caller
would get a success result but a NULL buffer. Now the dequeued buffer
is cancelled and the error propagated to the caller.
Bug: 14140551
Change-Id: I91547885c2cf6063dc7a8f02d97f2df282cdde2c
SensorService should hold a wakelock till the app reads events from a wakeup sensor. Currently drivers hold a wakelock with a
timeout while delivering events from a wake up sensor like Significant Motion. This hack can be removed now.
Bug: 9774884
Change-Id: If3b5acb99c9cf0cd29012fcfa9d6b04c74133d01
This fixes a bug where a View with filterTouchesWhenObscured will have
all touches filtered when in magnification accessibility mode. This is
due to magnification being a separate Window over top of the running
Activity. The method onFilterTouchEventForSecurity in View will then
always return false when filterTouchesWhenObscured is enabled on the
View. By adding the magnification Window to the list of Trusted Overlays
we can ensure that touches will work properly with this property
enabled.
This corresponds to AOSP change
I07706588a625682d05da5cb19f401139eb08a54c
Change-Id: Iba095433a1f9045349d1b47a58a33b850ed31c97
Native doesn't ever actually care about the attributes of keys, so
move all of it up into the managed layer and move all of the key
names down so they're defined once.
Change-Id: Ic8ded13ce050b2b98744735ff50d11e8d882d7d5
