The desc.txt file can now mark parts as 'must finish cleanly' by using
'c' as the part line prefix rather than 'p'. If so indicated, if the
bootanimation is asked to quit it will do so only after waiting to
finish that part.
I considered either making init.c service killing smarter or promoting
bootanim to be a bindable service with a requestExit method. However,
these changes are probably too big/risky given our ship date. So
I used a property as a mailbox between SurfaceFlinger and bootanim.
Bug: 6679877
Change-Id: Id7dca22caa50b450fff25ca94f7242d971034f41
When turning the screen off we could have 2 waiters on the
vsync condition: The main vsync waiter as well as one in
onScreenReleased(). We were only signaling the condition though,
so it it would be possible to wake onScreenReleased() without waking
the main vsync thread which would then be stuck in .wait().
We fix this by just using broadcast() when receiving a vsync event.
We also add a broadcast() to signal when the state of
mUseSoftwareVSync changes. This is important particularly for
the transition from hardware to software vsync because the main
vsync waiter might have observed mUseSoftwareVSync == false
and decided to block indefinitely pending a hardware vsync
signal that will never arrive.
Removed a potentially deadlocking wait for a signal in
onScreenReleased(). The function was trying to wait for the last
vsync event from the hardware to be delivered to clients but there
was no guarantee that another thread would signal it to wake up
again afterwards. (As far as I can tell, the only other other
thread that might wake it up at this point would be a client
application issuing a vsync request.) We don't really need to wait
here anyhow. It's enough to set the mUseSoftwareVSync flag,
wake up the thread loop and go. If there was a pending vsync
timestamp from the hardware, then the thread loop will grab
it and use it then start software vsync on the next iteration.
Bug: 6672102
Change-Id: I7c6abc23bb021d1dfc94f101bd3ce18e3a81a73e
this would happen when a resize was pending (ie: we have received
and processed a resize transaction but have not received a buffer
with the right size) and a new transaction came in that didn't
involve a resize, for instance a translate-only transaction.
in this case, we would incorrectly update the drawing state
with the pending size, eventhough we still don't have a buffer
for it.
the solution is quite simple, we never allow the size to propagate
from current to drawing state during the regular transaction processing
(unless we are in fixed-size mode -- meaning we don't need to have
a matching size buffer), this propagation happens later once we
receive the buffer.
Bug: 6624163
Change-Id: I11a97e4b88a7f3a0571ddcfe99c86cb04ce01a4d
this would happen when a window started with size A, was
resized to B and immediately resized to A. In this situation
the erquested and active size would be the same, and SF
would think a transaction wasn't needed.
we fix this by always comparing the requested sizes.
Also, make sure to set mRefreshPending once we're sure
we have succesfully called updateTexImage().
Bug: 6580962
Change-Id: I2c48b4df7f05fd35c9e1d2dd82095b0f3d5a0b6a
this bug introduced recently would happen when the very first
buffer of a surface was rejected for not having the right size
Bug: 6577035
Change-Id: I9fabf20006019f2a6c308be7c7f5c05bdcfd5014
SurfaceFlinger is using this new feature to reject buffers that
don't have the right size.
Bug: 6498869
Change-Id: I8a7250a47db6c082a357b703feb3b9d0fc8d3443
here we just shuffle a bit the code inside lockPageFlip(),
we move the code that handles the buffer size closer to the call
to updateTexImage(). no functionality change.
Change-Id: Ie3193cd86cd32cf3c89532449fd747d145ca0ab6
use a flag instead of pre-committing the "requested" state
to prevent propagation or "requested" to "active", which makes
things a lot clearer when reading the code.
also avoid going through the "resized" code-path when requested
size is equal to "active" size.
Bug: 6498869
Change-Id: I24f893ba0ec5ca06aac5b8da9818989ae7ce4005
The crop is now handled like a resize, it's latched only when we
receive a new buffer in the case we have a resize in the same
transaction.
Bug: 6498869
Change-Id: I9f3cbbe08fb19443899461ec441c714748a4fd1a
This change removes some visible region recomputation that was needed to handle
the SCALING_MODE_FREEZE cropping. We've changed things to use a window crop
from the WindowManager instead, so this is no longer needed.
Bug: 6299171
Change-Id: I32fbc2b689c985837126d8ba3d9a91e79613ffbf
This change adds a crop rectangle specified in window coordinates to the layer
state. The all window pixels outside this crop rectangle are treated as though
they were fully transparent. This change also adds the plumbing necessary for
WindowManager to set that crop.
Change-Id: I582bc445dc8c97d4c943d4db8d582a6ef5a66081
This change makes a change in the crop, scaling mode, transform, or buffer
dimensions trigger a recomputation of the visible regions of a window. With
the new cropping behavior for SCALING_MODE_FREEZE all of these can now affect
the visible region.
Bug: 6470541
Change-Id: I1904e47efbd708e28bf189f637d24dbef65cd41e
This change adss support for applying a buffer crop to layers with the
SCALING_MODE_FREEZE scaling mode. These layers do not scale the image, but
rather treat all pixels outside the crop rectangle as fully transparent.
Change-Id: I762518e56a37aef7747f9b581df2f2589b232c49
Bug: 6299171
This change makes SurfaceFlinger set the filtering-enable on each layer's
SurfaceTexture before querying the texture matrix to use for GLES composition.
Change-Id: I40c3defd73ebf96e3cabb3bfdb1fc97f2036753a
indeed, connect and queueBuffer return the same data, so it's
easier to have them use the same protocol.
Change-Id: I4f9fa3be0a80c9ab0a7a4039b282ae843aab02e1
this seems to hurt performance on some GPU. this change
might negatively affect performance on other GPUs though, but
probably in less time-sensitive cases. If this becomes a
problem it might become necessary to pre-clip the geometry
(so that we don't have to use glScissor).
This improves the rotation animation quite a bit.
Change-Id: I5dbe1286f7ad858ef2c1e1ad9a07ee3f26c0b1f3
this optimization didn't improve performance and in fact
seemed to hurt more than anything else. it also made
things a lot more complex as it introduced edges cases
when switching to/from h/w composer.
Change-Id: Iaafc235e175f5740cd98bff914d706e02ab88bb8
surfaceflinger will now handle each surface post
as soon as possible and handle the composition
itself at VSYNC time as usual.
Change-Id: I6b1ae33fd56062d86e5419ebab8def0ca5803fbf
this prevents the GPU from running when composition
is fully handled by overlays. this should improve
animations a bit.
Change-Id: If4ae584b7a3976e6bdd36e318686ac3940b6b075
