Call into the new HWC blank operation to blank or unblank the screen.
Legacy systems may have already blanked the screen via early suspend,
and can choose to not implement the blank operation in their hardware
composer implementation.
Change-Id: Ib403c8c0e36367a2cfef3e1d124872fcfeb9e7cb
- remove dependency on cached state in validateVisibility
- get rid of mVertices and mTransformedBounds
- get rid of validateVisibility
- get rid of unlockPageFlip
- handleTransaction now returns a dirty region
- computevisibileregion now uses window-manager space
if debug.sensors is true, extra debugging
sensors are enabled and HAL provided sensor fusion
is disabled
Change-Id: I9b093424edb8c5363d1337237cdf6abe4ab266f9
we now use a better quaternion propagation equation
this is especially beneficial for lower gyroscope rates
Change-Id: Ifbf273c8a092a8849ca4fe4b9bca30787e924018
both API and implementation will change, this is just a prototype
intended to show feasability.
SurfaceFlinger is passed an ISurfaceTexture through a new
callback, it is in turn used to create an EGLSurface which
surfaceflinger will draw into in addition to the main screen.
Change-Id: Id0bbb0b854bb7bae44d57246a90b65d4567f9a21
1) there was a typo when computing the system covariance
a term in dT^3 was ommitted; the impact was was very limited
because of how small this term is.
2) initialize the system covariance matrix with non-zero
values for the gyro-bias part. this improves the initial
bias estimation speed significantly.
3) added comments here and there
Change-Id: I4328c9cca73e089889d5e74b9fda99d7831762dc
some sensor HALs don't handle EINTR, make sure to catch it in the
sensorservice.
also if we ever encounter an error that we can't handle, we abort
which will restart us (or the whole system process if we're running
in it)
Bug: 5511741
Change-Id: I7051882b06980f778736b53d6cd021a99b5ca8d2
Requested rate will be clamped to the minimum rate and then
to 1ms. Previously we would return an error if a lower
rate was asked. The SensorManager documentation wording
allows this change.
We do this to get more consistancy between all the sensor
drivers / HALs
Change-Id: I199f76486fb76ccbb11e7280460a03726c767e84
When the app requests "fastest", the java layer encodes this as a
delay of 0. SensorService was passing this unchanged to the HAL.
However the HAL is required to reject delays lower that the
advertised lower delay.
Change-Id: I92be77acd3af62ffeb49e4b31e24ddcd203510e2
This is intended to absorb the cost of the IPC
to the permission controller.
Cached permission checks cost about 3us, while
full blown ones are two orders of magnitude slower.
CAVEAT: PermissionCache can only handle system
permissions safely for now, because the cache is
not purged upon global permission changes.
Change-Id: I8b8a5e71e191e3c01e8f792f253c379190eee62e
when we do our own sensor fusion, we also export an
improved orientation sensor and hide the HAL sensor.
The fused orientation sensor is much more precise, fast
and smooth.
Change-Id: I0ea843b47ad9d12f6b22cce51f8629852d423126
also use correct time propagation equation
disable the fused sensors when gyro is not present since
they were unusable in practice.
Change-Id: Iad797425784e67dc6c5690e97c71c583418cc5b5
Add support for 9-axis gravity and linear-acceleration sensors
virtual orientation sensor using 9-axis fusion
Change-Id: I6717539373fce781c10e97b6fa59f68a831a592f
SensorService main thread wasn't java-enabled. however, in
some situations we end-up calling into the BatteryService from
that thread which causes a crash.
Change-Id: Iffba90e4c4b743dba84d62f1342001a9db31916d
Make sure to send an event down only for sensors that report a value only on data
change. Other sensors, will naturally send an event when the next event is available.
Bug: 4025681
Change-Id: I6d444deda388b6bc9a33e3371e09d390f1566ec5
when an app dies, make sure to disable all sensors that process
is connected to, regardless of wether this was the LAST connection
to this sensor.
Change-Id: I9c72b1792eee03815304674d5c2f25b5270e4748
The cut-off frequency of the lowpass filter was too high
for the sampling rate used by DELAY_NORMAL.
Now we use the same filters used for the gravity vector
(cascaded biquad at 1.5 Hz)
Change-Id: I319dc4f449a3abd553d61b196a9ddcf7782f912d
whether a physical sensor needed to be active or not was managed by
a simpe reference counter; unfortunatelly nothing prevented it to
get out of sync if a sensor was disabled more than once.
sensorservice already maintainted a list of all the "clients"
connected to a physical sensor; we now use that list to determine if
a sensor should be enabled. This can never be "out-of-sync" since
this is the only data structure linking a sensor to a user of that
sensor.
also removed the isEnabled() method, which was never used and
implemented wrongly (since it didn't take into account that a sensor
could be disabled for a client but not of another).
Change-Id: I789affb877728ca957e99f7ba749def37c4db1c7
Most accelerometers have 8-bits accuracy so we beed to
reject 48dB in thestop-band, which requires a 4-th order
filter at the cut-off frequency we're using.
Change-Id: Ic00421d38d751641f86b1f3ad7663e6b44a91198
- upadte documentation for rotation vector
- update method dealing with rotation vector to deal with 4 components
- virtual rotation-vector sensor reports all four components
- improve SensorManager documentation layout
Whent he 4-th component of the rotation-vector is present, we can save
a square-root when computing the quaternion or rotation matrix from it.
Change-Id: Ia84d278dd5f0909fab1c5ba050f8df2679e2c7c8
indeed, by construction of the rotation matrix, it is
guaranteed to have a length of 1.
moreover, the normalization code was missing a square-root,
fortunatelly, since the length is 1, this didn't cause any
damage (since sqrt(1) = 1).
Change-Id: I9facd668caaf5bb3bfccb139ab872f2bb2066365
Rework sensorservice to allow "virtual sensors", that is
sensors that report a synthetized value based on real sensors.
the main change to sensorservice is around managing which real
sensor need to be activated and which rate to use.
The logic for all this has been moved into SensorDevice, which
essentially wraps the sensor HAL but adds two features to it:
- it keeps track of which sensors need to be activated
- it keeps track of what rate needs to be used
For this purpose an "identity" is associated with each real sensor
activation, so we can track them.
On start-up we check for gravity, linear-acceleration and
rotation-vector sensors, if they're not present in the HAL, we
synthetize them in sensor-service.
Change-Id: I841db2c1b37ef127ed571efa21732ecc5adf1800
