This adds a destroy() virtual on RefBase which
sublasses can implement. destroy() is called
in lieu of the destructor whenthe last strong
ref goes away.
* provide placeholder UI showing backup/restore start/stop/timeout
* don't kill the progress UI in mid stream
* tidy up the pax extended header data writing a little
Change-Id: Ife0cb78e3facb541d8327f1d5ca5fe77faa6cbca
Added the concept of pointer properties in a MotionEvent.
This is currently used to track the pointer tool type to enable
applications to distinguish finger touches from a stylus.
Button states are also reported to application as part of touch events.
There are no new actions for detecting changes in button states.
The application should instead query the button state from the
MotionEvent and take appropriate action as needed.
A good time to check the button state is on ACTION_DOWN.
As a side-effect, applications that do not support multiple buttons
will treat primary, secondary and tertiary buttons identically
for all touch events.
The back button on the mouse is mapped to KEYCODE_BACK
and the forward button is mapped to KEYCODE_FORWARD.
Added basic plumbing for the secondary mouse button to invoke
the context menu, particularly in lists.
Added clamp and split methods on MotionEvent to take care of
common filtering operations so we don't have them scattered
in multiple places across the framework.
Bug: 4260011
Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
You can now specify resource configuration variants "wNNNdp"
and "hNNNdp". These are the minimum screen width/height in "dp"
units. This allows you to do things like have your app adjust
its layout based only on the about of horizontal space available.
This introduces a new configuration change flag for screen size.
Note that this configuration change happens each time the orientation
changes. Applications often say they handle the orientation change
to avoid being restarted at a screen rotation, and this will now
cause them to be restarted. To address this, we assume the app can
handle this new config change if its target SDK version is < ICS.
Change-Id: I4acb73d82677b74092c1da9e4046a4951921f9f4
'tar' supports only 100-character paths; 'ustar' supports only
155+100 character prefix + paths; neither supports files larger
than about 8 gigabytes. We now use the POSIX.1-2001 'pax'
extended tar format for those files in the backup stream that
are too large or have too-long paths for the 'ustar' format.
Change-Id: I2f256823091deaec9b1ccea685d2344753c6cb67
This change the binder protocol between SurfaceTextureClient
and SurfaceTexture. dequeueBuffer() now takes the requested
parameters for the buffer. SurfaceTexture decides if the
buffer needs to be reallocated and does the allocation
if needed. In that case it returns BUFFER_NEEDS_REALLOCATION
to tell SurfaceTextureClient that it needs to call
requestBuffer (which all parameters have been removed) to
acquire a pointer to the buffer.
dequeueBuffer and requestBuffer could be folded into a single
IPC call, but we chose to optimize the case where buffers are
not created and avoid some complexity in the marshalling code.
Change-Id: I097a7f6f40a3491e10f3f3742eab33999286c304
This is the basic infrastructure for pulling a full(*) backup of the
device's data over an adb(**) connection to the local device. The
basic process consists of these interacting pieces:
1. The framework's BackupManagerService, which coordinates the
collection of app data and routing to the destination.
2. A new framework-provided BackupAgent implementation called
FullBackupAgent, which is instantiated in the target applications'
processes in turn, and knows how to emit a datastream that contains
all of the app's saved data files.
3. A new shell-level program called "bu" that is used to bridge from
adb to the framework's Backup Manager.
4. adb itself, which now knows how to use 'bu' to kick off a backup
operation and pull the resulting data stream to the desktop host.
5. A system-provided application that verifies with the user that
an attempted backup/restore operation is in fact expected and to
be allowed.
The full agent implementation is not used during normal operation of
the delta-based app-customized remote backup process. Instead it's
used during user-confirmed *full* backup of applications and all their
data to a local destination, e.g. via the adb connection.
The output format is 'tar'. This makes it very easy for the end
user to examine the resulting dataset, e.g. for purpose of extracting
files for debug purposes; as well as making it easy to contemplate
adding things like a direct gzip stage to the data pipeline during
backup/restore. It also makes it convenient to construct and maintain
synthetic backup datasets for testing purposes.
Within the tar format, certain artificial conventions are used.
All files are stored within top-level directories according to
their semantic origin:
apps/pkgname/a/ : Application .apk file itself
apps/pkgname/obb/: The application's associated .obb containers
apps/pkgname/f/ : The subtree rooted at the getFilesDir() location
apps/pkgname/db/ : The subtree rooted at the getDatabasePath() parent
apps/pkgname/sp/ : The subtree rooted at the getSharedPrefsFile() parent
apps/pkgname/r/ : Files stored relative to the root of the app's file tree
apps/pkgname/c/ : Reserved for the app's getCacheDir() tree; not stored.
For each package, the first entry in the tar stream is a file called
"_manifest", nominally rooted at apps/pkgname. This file contains some
metadata about the package whose data is stored in the archive.
The contents of shared storage can optionally be included in the tar
stream. It is placed in the synthetic location:
shared/...
uid/gid are ignored; app uids are assigned at install time, and the
app's data is handled from within its own execution environment, so
will automatically have the app's correct uid.
Forward-locked .apk files are never backed up. System-partition
.apk files are not backed up unless they have been overridden by a
post-factory upgrade, in which case the current .apk *is* backed up --
i.e. the .apk that matches the on-disk data. The manifest preceding
each application's portion of the tar stream provides version numbers
and signature blocks for version checking, as well as an indication
of whether the restore logic should expect to install the .apk before
extracting the data.
System packages can designate their own full backup agents. This is
to manage things like the settings provider which (a) cannot be shut
down on the fly in order to do a clean snapshot of their file trees,
and (b) manage data that is not only irrelevant but actively hostile
to non-identical devices -- CDMA telephony settings would seriously
mess up a GSM device if emplaced there blind, for example.
When a full backup or restore is initiated from adb, the system will
present a confirmation UI that the user must explicitly respond to
within a short [~ 30 seconds] timeout. This is to avoid the
possibility of malicious desktop-side software secretly grabbing a copy
of all the user's data for nefarious purposes.
(*) The backup is not strictly a full mirror. In particular, the
settings database is not cloned; it is handled the same way that
it is in cloud backup/restore. This is because some settings
are actively destructive if cloned onto a different (or
especially a different-model) device: telephony settings and
AndroidID are good examples of this.
(**) On the framework side it doesn't care that it's adb; it just
sends the tar stream to a file descriptor. This can easily be
retargeted around whatever transport we might decide to use
in the future.
KNOWN ISSUES:
* the security UI is desperately ugly; no proper designs have yet
been done for it
* restore is not yet implemented
* shared storage backup is not yet implemented
* symlinks aren't yet handled, though some infrastructure for
dealing with them has been put in place.
Change-Id: Ia8347611e23b398af36ea22c36dff0a276b1ce91
First step of improving app screen size compatibility mode. When
running in compat mode, an application's windows are scaled up on
the screen rather than being small with 1:1 pixels.
Currently we scale the application to fill the entire screen, so
don't use an even pixel scaling. Though this may have some
negative impact on the appearance (it looks okay to me), it has a
big benefit of allowing us to now treat these apps as normal
full-screens apps and do the normal transition animations as you
move in and out and around in them.
This introduces fun stuff in the input system to take care of
modifying pointer coordinates to account for the app window
surface scaling. The input dispatcher is told about the scale
that is being applied to each window and, when there is one,
adjusts pointer events appropriately as they are being sent
to the transport.
Also modified is CompatibilityInfo, which has been greatly
simplified to not be so insane and incomprehendible. It is
now simple -- when constructed it determines if the given app
is compatible with the current screen size and density, and
that is that.
There are new APIs on ActivityManagerService to put applications
that we would traditionally consider compatible with larger screens
in compatibility mode. This is the start of a facility to have
a UI affordance for a user to switch apps in and out of
compatibility.
To test switching of modes, there is a new variation of the "am"
command to do this: am screen-compat [on|off] [package]
This mode switching has the fundamentals of restarting activities
when it is changed, though the state still needs to be persisted
and the overall mode switch cleaned up.
For the few small apps I have tested, things mostly seem to be
working well. I know of one problem with the text selection
handles being drawn at the wrong position because at some point
the window offset is being scaled incorrectly. There are
probably other similar issues around the interaction between
two windows because the different window coordinate spaces are
done in a hacky way instead of being formally integrated into
the window manager layout process.
Change-Id: Ie038e3746b448135117bd860859d74e360938557
query() does not modify the object's data, so it needs to be a const method
Change-Id: I67c40a3c865461e6f1cc2193fd2d74286ff6ac8f
Signed-off-by: Iliyan Malchev <malchev@google.com>
This change makes the libgui makefile recurse into the tests directory
so that the tests get built by a top-level make when
TARGET_BUILD_VARIANT=tests.
Change-Id: I6f623cc4b86dfeb00b9d21823316dbd9def23110
This change removes the check that disallowed the creation of an
EGLSurface that would send frames to a SurfaceTexture.
Change-Id: I44c6d5df503cc676a88144d72d39b414692ce4c9
Under Fedora 15 Beta, gcc 4.6.0 warns:
frameworks/base/libs/utils/RefBase.cpp: In member function
‘void android::RefBase::weakref_type::trackMe(bool, bool)’:
frameworks/base/libs/utils/RefBase.cpp:483:67: error: passing
‘const android::RefBase::weakref_impl’ as ‘this’ argument of
‘void android::RefBase::weakref_impl::trackMe(bool, bool)’
discards qualifiers [-fpermissive]
trackMe is not a const function, so don't use const in the static_cast
to a weakref_impl pointer.
Change-Id: I3c9ba73eb127985f5f54197ffecf2939c50f632c
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: I5126b1e69d95252fda7f2a684c9287e239a57163
We now write battery history directly into a buffer, instead of
creating objects. This allows for more efficient storage; later
it can be even better because we can only write deltas.
The old code is still there temporarily for validation.
Change-Id: I9707d4d8ff30855be8ebdc93bc078911040d8e0b
This leak was intentional, it was there to deal with the fact that
some gralloc implementations don't track buffer handles with
file-descriptors so buffers needed to stay alive until there were
registered, which is not guaranteed by binder transactions.
In this new implementation, we use a small BBinder holding a
reference to the buffer, which with tuck into the parcel. This forces
the reference to stay alive until the parcel is destroyed, which
is guaranteed (by construction) to happen after the buffer is
registered.
this allows the public facing API to not expose the previous hack.
Change-Id: I1dd6cd83679a2b7457ad628169e2851acc027143
Some drivers report individual finger updates one at a time
instead of all at once. When 10 fingers are down, this can
cause the framework to have to handle 10 times as many events
each with 10 times as much data. Applications like
PointerLocation would get significantly bogged down by all
of the redundant samples.
This change coalesces samples that are closely spaced in time,
before they are dispatched, as part of the motion event batching
protocol.
Increased the size of the InputChannel shared memory buffer so
that applications can catch up faster if they accumulate a
backlog of samples.
Added logging code to help measure input dispatch and drawing
latency issues in the view hierarchy. See ViewDebug.DEBUG_LATENCY.
Change-Id: Ia5898f781f19901d2225c529a910c32bdf4f504f
You can now specify resource configuration variants "wNNNdp"
and "hNNNdp". These are the minimum screen width/height in "dp"
units. This allows you to do things like have your app adjust
its layout based only on the about of horizontal space available.
This introduces a new configuration change flag for screen size.
Note that this configuration change happens each time the orientation
changes. Applications often say they handle the orientation change
to avoid being restarted at a screen rotation, and this will now
cause them to be restarted. To address this, we assume the app can
handle this new config change if its target SDK version is < ICS.
Change-Id: I22f8afa136b4f274423978c570fa7c9855040496
SurfaceTexture now has the concept of default size a new method,
setDefaultBufferSize() to set it. When the default size is
changed, dequeueBuffer() will return a value telling the
client that it must ask for a new buffer.
The above only applies if the client has not
overriden the buffer size with setGeometry.
Change-Id: I520dc40363054b7e37fdb67d6a2e7bce70326e81
Runtime resource overlay allows unmodified applications to appear
as if they had been compiled with additional resources defined. See
libs/utils/README for more information.
This commit is the first iteration of runtime resource overlay. It
provides the actual overlay modifications and loading of trusted overlay
packages (ie residing in /vendor) targeting framework-res.apk.
This commit loads exactly one overlay package. The overlay,
if present, must target framework-res.apk and be located at
/vendor/overlay/framework/framework-res.apk.
Change-Id: If26ee7754813004a96c043dba37fbe99fa3919db
This modify is for the devices which have a slidable H/W keyboard with backlight.
For example of current issues:
- Backlight of H/W keyboard doesn't turn on when the device starts up with slide-open.
- Home screen doesn't display with proper orientation when the device starts up with slide-open.
Change-Id: I6a6a18d0b09d0ba484ca992c9fb34f24de9bf21b
this is the first step in unifying surfacetexture and surface.
for this reason the header files were not moved, as most of them
will eventually go away.
NOTE: currently we keep libsurfaceflinger_client.so as an empty
library to workaround prebuilt binaries wrongly linking against
it.
Change-Id: I130f0de2428e8579033dc41394d093f4e1431a00
Added a timeout mechanism to EventHub and InputReader so that
InputMappers can request timeouts to perform delayed processing of
input when needed.
Change-Id: Iec2045baaf4e67690b15eef3c09a58d5cac76897
API addition: The timestamps are represented as nanoseconds from some
arbitrary time point. Like the SurfaceTexture transform matrix, the
timestamp retrieved by getTimestamp is for the last frame sent to the
GL texture using updateTexImage().
Camera HAL change: Expect vendors to set these timestamps using
native_window_set_buffers_timestamp(). For now, they are
autogenerated by SurfaceTextureClient if set_buffers_timestamp() is
never called, but such timing is likely not accurate enough to pass a
CTS test.
bug:3300707
Change-Id: Ife131a0c2a826ac27342e11b8a6c42ff49e1bea7
a memory corruption happned when the buffer pool was resized
(like when playing a video or using camera) and there was
no current active buffer. In this case, the faulty code
would index into an array at position -1 which corrupted
24 bytes of data.
also improved region validation code (ifdef'ed out by default)
Bug: 4093196
Change-Id: I915c581d131148959d720e00e3892e9186ab733d
Replaced VelocityTracker with a faster and more accurate
native implementation. This avoids the duplicate maintenance
overhead of having two implementations.
The new algorithm requires that the sample duration be at least
10ms in order to contribute to the velocity calculation. This
ensures that the velocity is not severely overestimated when
samples arrive in bursts.
The new algorithm computes the exponentially weighted moving
average using weights based on the relative duration of successive
sample periods.
The new algorithm is also more careful about how it handles
individual pointers going down or up and their effects on the
collected movement traces. The intent is to preserve the last
known velocity of pointers as they go up while also ensuring
that other motion samples do not count twice in that case.
Bug: 4086785
Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
This change makes the ANativeWindow_lock NDK function error out if it is
passed an ANativeWindow with a concrete type that is not Surface. It
also makes eglCreateWindowSurface fail if it is passed a
SurfaceTextureClient as its 'window' argument.
Bug: 4087277
Change-Id: Ie68c50c52d88f72d8a387f6c094908044c83a88c
This change adds a getter method to SurfaceTextureClient to get the
ISurfaceTexture object with which the SurfaceTextureClient is
communicating.
Bug: 4086509
Change-Id: Ifec621e0fe5392a5be56b2348fdc54067cbebcdd
This change adds a query to the ANativeWindow interface for getting the
concrete type of the ANativeWindow.
Bug: 4086509
Change-Id: I64aa86d72fbca3b52a98e1fc35608737781a3178
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
This change fixes the transform matrix computation in SurfaceTexture
when a crop rectangle is specified by the image producer. It also adds
a test for this case as well as a basic test for the uncropped case.
Bug: 4070775
Change-Id: I1481c9ce9d08fe7f2bff86d3afdeab7d4002b157
This change makes SurfaceFlinger treat layers for which the active
buffer has the GRALLOC_USAGE_PROTECTED bit set as if they have the
'secure' flag set.
Change-Id: Ic60b6513a63e4bb92ec6ce9fd12fd39b4ba5f674
Bug: 4081304
Associate each motion axis with the source from which it comes.
It is possible for multiple sources of the same device to define
the same axis. This fixes new API that was introduced in MR1.
(Bug: 4066146)
Fixed a bug that might cause a segfault when using a trackball.
Only fade out the mouse pointer when touching the touch screen,
ignore other touch pads.
Changed the plural "sources" to "source" in several places in
the InputReader where we intend to refer to a particular source
rather than to a combination of sources.
Improved the batching code to support batching events from different
sources of the same device in parallel. (Bug: 3391564)
Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
6d0f6cb Revert "Fix [3513017] in lockscreen but showing empty launcher (live wallpaper) only"
6154412 Revert "partially fix [3306150] HTML5 video with H/W acceleration blackout (DO NOT MERGE)"
37c2a37 fix [3408713] Dialog window invisible sometimes
It looks like there is a surface leak, it's unclear where it is.
Without those reverts, this would cause a leak of the associated buffers
which is far more problematic. this change might hide the surface leak.
Bug: 4078032
Change-Id: Iedcda3ffcdd2f69d41047b5c3134c1e867ff90d7
This change adds a new 'method' to the ANativeWindow interface to check
whether buffers queued to the window will be sent directly to the system
window compositor.
Change-Id: I4d4b199e328c110b68b250029aea650f03c8724d
Bug: 3495535
The spec for keymaps and keboard input at
http://source.android.com/porting/keymaps_keyboard_input.html
mentions the stand alone ALT and SHIFT modifiers:
SHIFT: While pressed, the shift key modifier is set
ALT: While pressed, the alt key modifier is set
This commit implements support for these.
Change-Id: I5854ef3df541740cc3443b474a9c41183eb7561c
Ex: key 305 BACK ALT
Ensure that the joystick can always reach -1.0, 0.0 and 1.0 positions
even when noise filtering is applied. (Bug: 3514510)
Add support for a few more standard axes.
Add additional mapping modes for axes.
Some axes are inverted from standard interpretation
or are actually intended to be split into two distict axes
such as left/right trigger controls or accelerator/brake.
Add key layout file for a G25 racing wheel and XBox 360 controller
to tweak behavior. They work fine without them but the axis mappings
are not ideal.
Change-Id: I0fddd90309af4dc14d35f34fe99ed6e521c0b7c7
Added some plumbing to enable the policy to intercept motion
events when the screen is off to handle wakeup if needed.
Added a basic concept of an external device to limit the scope
of the wakeup policy to external devices only. The wakeup policy
for internal devices should be based on explicit rules such as
policy flags in key layout files.
Moved isTouchEvent to native.
Ensure the dispatcher sends the right event type to userActivity
for non-touch pointer events like HOVER_MOVE and SCROLL.
Bug: 3193114
Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
Fades out the mouse pointer:
- after 15 seconds of inactivity normally
- after 3 seconds of inactivity in lights out mode
- after a non-modifier key down
- after a touch down
Extended the native Looper to support enqueuing time delayed
messages. This is used by the PointerController to control
pointer fade timing.
Change-Id: I87792fea7dbe2d9376c78cf354fe3189a484d9da
