We replace the blank/unblank calls in surfaceFlinger with a more generic
setPowerMode() routine.
Some displays support different power modes (for example, with reduced
color palettes). Depending on the use case we should be able to toggle
these modes, so as to achieve incremental power savings.
Initially, three power modes will be supported:
- HWC_POWER_MODE_OFF
- HWC_POWER_MODE_DOZE
- HWC_POWER_MODE_NORMAL
HWC_POWER_MODE_OFF will correspond to blanking the display, while
HWC_POWER_MODE_NORMAL will correspond to unblanking. HWC_POWER_MODE_DOZE
will put the display into a low power setting, if it is supported in
hardware.
If such a low power mode is not supported, it should be treated as a
call to set the mode to HWC_POWER_MODE_NORMAL.
As a consequence of adding the mPowerMode field, the mScreenAcquired is
no longer required, and thus references to it are removed and replaced
equivalent references to mPowerMode.
We also add the glue code to connect the services invocation of setting
a power mode and the HAL implementation in HWComposer.
Bug: 13472578
Change-Id: I431595ecf16d2f2c94259272db3dd42f29636204
Signed-off-by: Prashant Malani <pmalani@google.com>
Adds a sourceCrop Rect parameter to screenshot commands, which allows
clients to capture only a portion of the screen instead of the whole
screen.
Bug: 15137922
Change-Id: I629447573cd34ffb96334cde7ba02490b9ea06d8
This allows querying and switching display device configurations
through the ISurfaceComposer/SurfaceComposerClient interface.
Bug: 14320401
Change-Id: I8c22165698950e5da32204c1c4da92122f91a715
Add the ability to ignore layers' transformation matrices during
screenshot capture, which will allow the window manager to capture
unrotated images for recents during the device rotation animation.
Bug: 11805195
Change-Id: I854d87bc84ca06ef9a054a454af1c080ee66fbb8
Moves the "opaque layer" from Layer to Layer::State. This allows
it to be updated as part of a transaction.
Bug 12387406
Change-Id: I0a114ce6adf77cd12fb08f96e0691b76c475768d
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
We're not using IMemoryHeap as a transport anymore,
instead we're providing a CpuConsumer and use the
IGraphicBufferProducer version of the screenshot API.
However, some GPU drivers don't support properly
a GPU to CPU path, to work around this, we use a
temporary BufferQueue on the server side for the
GL rendering, and we use glReadPixels into the
CpuConsumer (we're now using a CPU to CPU path
which is always supported).
Currently this "wrapping" is always performed,
but it can be bypassed on devices that support
the GPU to CPU path.
This also addresses a DoS attack vector on
SurfaceFlinger, where an application could
consume all of SF's filedescriptors by creating
a lot of screenshots in a row.
Bug: 8390553
Change-Id: I9e81514c2a7711b9bb393f74305be7d2abe08f1c
ISurface was only used to get the IGraphicBufferProducer from
a Layer. It's now replaced by a BBinder subclass / IBinder and
is only used as a handle to the surface, to both refer to it
and manage its life-time.
Also cleaned-up a bit the ISurfaceComposer interface and
"create layer" code path.
Change-Id: I68d0e02d57b862cffb31d5168c3bc10cea0906eb
- SurfaceFlinger now supports to take a screenshot
directly into an IGraphicBufferProducer
- reimplement the IMemoryHeap screenshot on top
of the above
- reimplement LayerScreenshot such that its
BufferQueue is directly used as the destination
of the screenshot. LayerScreenshot is now a thin
wrapper around Layer
Bug: 6940974
Change-Id: I69a2096b44b91acbb99eba16f83a9c78d94e0d10
The C++ class names don't match what the classes do, so rename
ISurfaceTexture to IGraphicBufferProducer, and SurfaceTexture to
GLConsumer.
Bug 7736700
Change-Id: Ia03e468888025b5cae3c0ee1995434515dbea387
This change fixes a number of small glitches that can occur when
multiple components in the same process are updating surfaces.
One would expect that updates to disjoint sets of surfaces would
not collide but this is not the case. The first component to
close the global transaction causes all pending updates to
be applied, including those that another component might not
have finished setting up if it also had an open transaction
at the same time.
Change-Id: I99345958581abbe0e1e325a5bcba37e8941a313a
This change adds support for displays that are not allowed to display surfaces
with the eSecure flag set. All non-virtual displays are considered secure,
while virtual displays have their secure-ness specified at creation time.
Bug: 7368436
Change-Id: I81ad535d2d1e5a7ff78269017e85b111f0098500
This change adds a transaction flag for WindowManager to indicate that a
transaction is being used to animate windows around the screen. SurfaceFlinger
will not allow more than one of these transactions to be outstanding at a time
to prevent the animation "frames" from being dropped.
Bug: 7353840
Change-Id: I6488a6e0e1ed13d27356d2203c9dc766dc6b1759
The Surface createDisplay() call takes a display name for debugging.
This change carries it through SurfaceFlinger and displays it in
the "dumpsys SurfaceFlinger" output.
Bug 7058158
Change-Id: I79f3474a8656ff1beb7b478e0dbf2c5de666118a
The ComposerService object wasn't watching for SurfaceFlinger
restarts, which doesn't usually matter because the app framework
restarts when SurfaceFlinger dies. However, mediaserver continues
to run, which means its ComposerService object was trying to use
a dead handle, and playback of DRM movies was failing.
This adds a DeathRecipient listener and some logic to re-establish
the SurfaceFlinger connection.
Bug 6645813
Change-Id: I07581b881d3835601aa57d5358c8259d93bc4515
This is a compatibility shim for one product whose drivers
are depending on SurfaceComposerClient::getDisplayInfo(
int, DisplayInfo*) when it really shouldn't.
Revert this patch when the problem has been resolved.
Bug: 7065398
Change-Id: I6542691b81fd1b1e1d79500a62e82d40a3d51db7
Use only display tokens in the API to refer to new displays.
Don't require the caller to specify the display when creating
a surface (since in general a surface could be shown on
any display).
This is intended to be a minimum change just to update the API.
Note that SurfaceFlinger still uses DisplayID in a few places
internally that might cause some features not to work properly
when there are multiple displays (LayerScreenshot, for example).
Change-Id: I3d91eec2da406eefd97bcd53655d403ad865a7e6
- displays are represented by a binder on the client side
- c++ clients can now create and modify displays
Change-Id: I203ea5b4beae0819d742ec5171c27568f4e8354b
this attribute can be set through a regular transaction using
SurfaceComposerClient (just like any other attribute, eg: position or size)
Change-Id: I701a47c677ea6442ca713728a93335328cd2b172
no change of functionality -- the old behavior is implemented
on top of this new protocol.
this new protocol will allow, eventually, to pass informations
about displays and layer stacks.
Change-Id: Ic6c2295e61ec8ecbc8ce01ab7664e35d928202fc
This change adds a crop rectangle specified in window coordinates to the layer
state. The all window pixels outside this crop rectangle are treated as though
they were fully transparent. This change also adds the plumbing necessary for
WindowManager to set that crop.
Change-Id: I582bc445dc8c97d4c943d4db8d582a6ef5a66081
This change enables a layer or orientation update transaction sent to
SurfaceFlinger to explicitly request a synchronous transaction.
Change-Id: I97cbba610c13679849f66114b216fa6dbf12f2a9
This change merges the ISurfaceComposer::setOrientation functionality
into ISurfaceComposer::setTransactionState. It enables the window
manager to atomically update both the display orientation and the
position and size of the windows in a single transaction with
SurfaceFlinger.
Bug: 5439574
Change-Id: I18a8ccc564d7d760ef8afb2d015ccdb7a7963900
Added Surface.setPosition(float, float) which allows to set a surface's
position in float.
Bug: 5239859
Change-Id: I903aef4ad5b5999142202fb8ea30fe216d805711
