The Android EGL shim injects GL_EXT_debug_marker into the ES driver
EXTENSIONS string for the OpenGL ES 1.x and 2.0/3.0/3.1 drivers if
the extension is not already provided. This feature is used by
GLES_trace.
In Open GL ES 3.0 it became possible to query an indexed version of
the EXTENSIONS string via GetStringi(). NUM_EXTENSIONS Gets were
also added to the specification (taken from Open GL).
If the shim does not have to inject the extension, then there is no
problem, as glGetString() and glGetStringi() / NUM_EXTENSIONS will
be consistent. However, if the Android EGL shim injects the
extension, NUM_EXTENSIONS and GetStringi() will report one less
extension than is really available.
Consistency between these methods is tested by the dEQP framework
with the dEQP-GLES3.functional.state_query.string.extensions test.
If the driver does not provide GL_EXT_debug_marker, this test
fails.
This change wraps all of the affected entry points so that the
wrapped driver extensions are never visible directly to dEQP,
eliminating the inconsistency.
This adds EGL wrapper functions for the following EGL extensions:
EGL_EXT_buffer_age
EGL_KHR_partial_update
EGL_KHR_swap_buffers_with_damage
Change-Id: I407acda1e0310f7f01a5efe9c915721a941138a4
- Wire up new dataSpace parameter through buffer queue stack
- Update tests to include the parameter
- Switch eglApi to using dataSpace to indicate sRGB gamma/linear
difference
- Remove RAW_SENSOR in favor of RAW16
- Remove use of sRGB format enums
- Add default dataspace to buffer queue core
- Add query for default dataspace
Cherry pick of I070bd2e7c56506055c419004c29e2e3feac725df
Change-Id: I461952389c18051176c6b75e664f20ad369f5760
Some time before kitkat, a workaround was put in place to keep tuna
working with obsolete PowerVR GPU drivers. The tuna product was dropped
in AOSP for kitkat, but the workaround remained.
There are still a number of devices shipping with OMAP4 processors, and
this workaround continues to be applied on those products even when it
is not required. The effect is that virtual display CTS will fail on
those devices.
Fix regression from 6701fbe5f0 .
The rdhwr instruction is unsupported by mips32r1 cpus, but is
supported via kernel emulation on those cpus.
Change-Id: Ieb3343fff0f0da54003044f451c90e1c761208eb
Replace the global lock in terminate for the ref count check with atomics and a
local lock.
Bug: 19072064
Change-Id: I0cfd6564e227a75b8387a8788b16381d5bc2cc88
Avoid ambiguity by using register numbers. Register names are
interpreted depending on the ABI. Fixes the issue with mips64 gcc,
where registers t0-t4 are translated into $8-$11 (o32 ABI) instead
of $12-$15 (o64 ABI).
Also, use t9 ($25) for storing function address
(in getProcAddress.cpp).
Change-Id: I12ef5cd98bf14dab3c01f2756889cc02856c1cd8
Combines 4 patches by Dragoslav and Douglas:
Use t9 to hold the address of the called function.
Add support for gl binding.
Fix inline assembly code to be R6 compatible.
Fix some more inline assembly code to be R6 compatible.
Change-Id: I0b899813790b2ba4ca538bb21692014cc1933f66
egl_connection_t is a struct - shouldn't be forward-declared as a class
Change-Id: I39f5d9bff9fc64f4694fb2bef7e4afa131b449cc
Signed-off-by: Bernhard Rosenkränzer <Bernhard.Rosenkranzer@linaro.org>
Wrapper functions were broken on builds that forced -fno-omit-frame-pointer flag.
Change-Id: I5a80f9587fb3db821b4156af56acda59a0b4579b
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Yong Yao <yong.yao@intel.com>
There was no explicit support for x86/64 architecture in EGL/GLES wrappers.
This resulted either in failures or sub-optimal implementation of the wrapper functions.
Change-Id: I20d99d7372fbf642ee4b94a05c8cb971cba29988
Signed-off-by: Wajdeczko, Michal <michal.wajdeczko@intel.com>
These are left over from an early (not finished?) GL debugging
facility that morphed into GLES_trace. Most of the rest of it has
already been removed, these few pieces were still hanging aroung.
Bug: 15028495
Change-Id: Ib7c03eb8d0db30112e1b83e5262bba03006770de
Bug: 13927881
'twas useful and perhaps should be always enabled (please?)
but not like this, so reverting.
This reverts commit db4488565a.
Change-Id: I9a78c6d6e48342ef6ca1f2f7b5303ca47ccc6086
Bug: 13745587
Temporarily turn on callstack logging for gl_no_context() to
try and track down font cache corruption
Change-Id: I657ee85e811746441c5ce0ffe5adbfb3fb011d4c
The previous message indicated that the fault was due to an already-
connected window, which was misleading at times.
Bug 12439318
Change-Id: I1e0a042673dd245d1b0d237af963c52946803eb6
This change makes GLConsumer use the EGL_ANDROID_image_crop extension when
available on a device. The crop rectangle is passed to the EGL driver when
creating EGLImages, allowing the crop to be performed by the driver rather than
using the texture transform matrix.
Bug: 10897141
Change-Id: I63e9a5d5c85067376abc420e3639154468346311
EGL now picks the buffer format out of a small set
of formats compatible with CPU consumers instead of
using the EGL_NATIVE_VISUAL_ID.
Bug: 10194508
Change-Id: If423cd29601b7a3ace8670f4c73004132cfc4b31
If the implementation eglCreateContext failed, we called
eglGetError(), so we could check that it set the EGL error properly.
But since we'd already called this, when the app called eglGetError()
it would get EGL_SUCCESS!
Bug: 10181333
Change-Id: Ic45d3a8fcb8c4421e04844c6d2f52761790b5948
We've had the extended behavior since Android 4.3, but the extension
hadn't been ratified by Khronos yet so we couldn't add it to the
extension string.
Bug: 9681677
Change-Id: I78842316a3ab7a3f66a0ac1a4742d837de664c4c
If there are two or more buffers pending that are ready for
immediate presentation, drop all but the last one.
Any code that didn't explicitly specify timestamps for buffers
was using the default value (auto-generated "now"). As a result,
surfaceflinger would drop frames whenever more than one buffer
was queued. We now use zero as the auto-generated timestamp,
and we don't set the timestamp in eglBeginFrame().
Change-Id: I187f42d33de227cd3411ff0dcd3b9ce1961457eb
Fallout from the Flattenable change, update all its uses.
Additionnaly, fix/tighten size checks when (un)flatten()ing
things.
Removed the assumption by some flattenables (e.g.: Fence)
that the size passed to them would be exact (it can
and will be larger in some cases)
The code in Parcel is a bit complicated so that we don't
have to expose the full implementation (and also to
keep the code smallish).
Change-Id: I0bf1c8aca2a3128491b4f45510bc46667e566dde
