colorize a bit the output of dumpsys SurfaceFlinger to
make it easier to read. Right now it will bold the
title of each section and use green for the name of
each layer.
Change-Id: I0d9f18d115401cb45109d244ef3a278481f68cc6
since the transparent region hint really depends on the
content of the window containing the SurfaceView
(it's calculated by the view hierarchy based on
overlapping views), it makes sense to latch it only when
the content of the window (the app) changes.
This should help fixing drawing artifacts when changing the
layout of a window containing a SurfaceView.
Bug: 8511430
Change-Id: Ic3aa668495293cb4d82a2cd7dcf3b6a337287678
ISurface was only used to get the IGraphicBufferProducer from
a Layer. It's now replaced by a BBinder subclass / IBinder and
is only used as a handle to the surface, to both refer to it
and manage its life-time.
Also cleaned-up a bit the ISurfaceComposer interface and
"create layer" code path.
Change-Id: I68d0e02d57b862cffb31d5168c3bc10cea0906eb
The functionality of LayerBase and Layer is folded
into Layer. There wasn't a need for this abstraction
anymore.
Change-Id: I66511c08cc3d89009ba4deabf47e26cd4cfeaefb
- SurfaceFlinger now supports to take a screenshot
directly into an IGraphicBufferProducer
- reimplement the IMemoryHeap screenshot on top
of the above
- reimplement LayerScreenshot such that its
BufferQueue is directly used as the destination
of the screenshot. LayerScreenshot is now a thin
wrapper around Layer
Bug: 6940974
Change-Id: I69a2096b44b91acbb99eba16f83a9c78d94e0d10
- the crop region is now always calculated and set
in LayerBase::setGeometry which uses new virtuals to
access the "content" crop and transform (which are
provided by the Layer subclass)
Change-Id: Ib7769bdec0917dd248f926600c14ddf9ea84897a
This change makes the 'dumpsys SurfaceFlinger --latency' command with no extra
args dump the frame timestamp data for the most recent frames that
SurfaceFlinger generated that included window animation transaction changes.
Change-Id: I8bded1ea08a4cddefef0aa955401052bb9107c90
Rearranges updateTexImage() so that the SurfaceFlinger-specific
behavior is in a new SurfaceFlingerConsumer subclass.
SurfaceTexture behavior should not be altered. Instead of
acquire-bind-release we now do acquire-release-bind, but since
it's all done with the lock held there shouldn't be any
externally-visible change.
Change-Id: Ia566e4727945e2cfb9359fc6d2a8f8af64d7b7b7
if a layer is not mirrored, we now use its display
as the source for the transfrom hint calculation
instead of always using the default (main) display.
this change does two thing:
1) we make updateTransformHint take a DisplayDevice
as a parameter instead of hard-coding the
main display.
2) each time we do a transaction that could change
the hint, we go through all layers and
figure out which display should be used for their
transform hint.
Bug: 7599344
Change-Id: I9b04a95e6c372dd770bacf81d8ef6f8e31b87b83
This change moves the frame time history tracking code out of Layer and into a
new class called FrameTracker. It also changes the tracking to use signal
timestamps from fences when available for more accurate results.
Change-Id: I323c5f075c58bf86ce363b52af885ad0f6365f2b
This prevents strong reference cycles when the listener implementation also
holds a strong pointer to the ConsumerBase
Bug: 7425644
Change-Id: I1514b13a32b18d421c902dddebec0765a989c55c
The hints were being set a little too late, so the pre-rotation stuff
wasn't quite working.
Bug 7054997
Change-Id: Id8d5c626db7a76f768ba762a145b315878ee08e6
DisplayDevices are now keyed of the wp<IBinder> the client uses.
DisplayID has now become DisplayType which is just used to identify
physical displays (as opposed to virtual displays such as wifi displays).
Change-Id: I0c5968f2c902dcd699a7e0afacf833ff070c12ea
it's safer this way because this object owns an
EGLSurface which cannot be easily reference-counted.
it also gives us the ability to sub-class it, which
we might want to do soon.
Change-Id: I07358bb052dc5a13b4f2196b2c2b6e6e94c4bb4f
- fix typo drawForSreenshot misspelled
- get rid of DisplayDeviceBase
- removed unused or unneeded code
- always pass a DisplayDevice to Layer methods that are called
on a per-display basis (to make it clear that this could be
called more than once per composition).
Change-Id: Id948b7e09fe5c06db0e42d40d6ed75dd095c7f44
- remove dependency on cached state in validateVisibility
- get rid of mVertices and mTransformedBounds
- get rid of validateVisibility
- get rid of unlockPageFlip
- handleTransaction now returns a dirty region
- computevisibileregion now uses window-manager space
After a HWC set, each SurfaceFlinger Layer retrieves the release fence
HWC returned and gives it to the layer's SurfaceTexture. The
SurfaceTexture accumulates the fences into a merged fence until the
next updateTexImage, then passes the merged fence to the BufferQueue
in releaseBuffer.
In a follow-on change, BufferQueue will return the fence along with
the buffer slot in dequeueBuffer. For now, dequeueBuffer waits for the
fence to signal before returning.
The releaseFence default value for BufferQueue::releaseBuffer() is
temporary to avoid transient build breaks with a multi-project
checkin. It'll disappear in the next change.
Change-Id: Iaa9a0d5775235585d9cbf453d3a64623d08013d9
HWComposer must abstract the HWC HAL entirely, so that the
HAL can continue to evolve (and break binary compatibility)
without breaking SurfaceFlinger. The HWC data structure had
leaked outside of HWComposer, this is now fixed.
We now have an abstract interface that provide all the
needed functionality, HWCompose provides concrete
implementations of it based on the the HWC version.
Change-Id: I40c4676dc986b682ede5520a1c60efe64037b0bb
This change adds a crop rectangle specified in window coordinates to the layer
state. The all window pixels outside this crop rectangle are treated as though
they were fully transparent. This change also adds the plumbing necessary for
WindowManager to set that crop.
Change-Id: I582bc445dc8c97d4c943d4db8d582a6ef5a66081
This change makes SurfaceFlinger set the filtering-enable on each layer's
SurfaceTexture before querying the texture matrix to use for GLES composition.
Change-Id: I40c3defd73ebf96e3cabb3bfdb1fc97f2036753a
with this changes, SF transactions are handled as soon as possible
but do not trigger updates. the update is delayed until the next
vsync.
this allows us to work much better without requiring triple-buffering.
Change-Id: I1fa10794d0cf742129f0877698b7b1e1f2ec7401
--latency-clear [name]
clears the latency data for the specified layer or for
all layers if none is specified
--list
prints the list of all layers regardless of their visibility
Change-Id: I7c07ae020f838c173b98ee50f3fb3e93da78acbb
It is now possible to say:
dumpsys SurfaceFlinger --latency
to print latency information about all windows
dumpsys SurfaceFlinger --latency window-name
to print the latency stats of the specified window
for instance: dumpsys SurfaceFlinger --latency SurfaceView
The data consists of one line containing global stats, followed by
128 lines of tab separated timestamps in nanosecond.
The first line currently contains the refresh period in nanosecond.
Each 128 following line contains 3 timestamps, of respectively
the app draw time, the vsync timestamp just prior the call to set and
the timestamp of the call to set.
Change-Id: Ib6b6da1d7e2e6ba49c282bdbc0b56a7dc203343a
This change removes the dead code from SurfaceFlinger that resulted from
disabling support for freezing the display.
Change-Id: I4e5ff00c94b4c7a79af2f65c9850c135210068ed
This change fixes the NATIVE_WINDOW_QUEUES_TO_WINDOW_COMPOSER query of
Surface and SurfaceTextureClient. Surface now uses the inherited
SurfaceTextureClient implementation of this query. SurfaceTextureClient
now queries SurfaceFlinger to determine whether buffers that are queued
to its ISurfaceTexture will be sent to SurfaceFlinger (as opposed to
some other process).
Change-Id: Iff187e72f30d454229f07f896b438198978270a8
Add the concept of synchronous dequeueBuffer in SurfaceTexture
Implement {Surface|SurfaceTextureClient}::setSwapInterval()
Add SurfaceTexture logging
fix onFrameAvailable
This change makes SurfaceFlinger treat layers for which the active
buffer has the GRALLOC_USAGE_PROTECTED bit set as if they have the
'secure' flag set.
Change-Id: Ic60b6513a63e4bb92ec6ce9fd12fd39b4ba5f674
Bug: 4081304
