the original connect/disconnect hooks are deprecated
and replace by api_connect/api_disconnect. the original
hooks are no no-ops.
api_connect/api_disconnect is now only called from the
android framework.
Bug: 5057915
Change-Id: I8ca64cd1acd6cabf915bf54689ec2e5f6dfa495a
Bug: 5064702
Introduced the concept of an InputListener to further decouple
the InputReader from the InputDispatcher. The InputListener
exposes just the minimum interface that the InputReader needs
to communicate with the outside world. The InputReader
passes arguments to the InputListener by reference, which makes
it easy to queue them up.
Consolidated all of the InputReader locks into one simple global
Mutex. The reason this wasn't done before was due to potential
re-entrance in outbound calls to the InputDispatcher. To fix this,
the InputReader now queues up all of the events it wants to send
using a QueuedInputListener, then flushes them outside of the
critical section after all of the event processing is finished.
Removing all of the InputMapper locks greatly simplifies the
implementation.
Added tests for new stylus features such as buttons, tool types,
and hovering.
Added some helpers to BitSet32 to handle common code patterns
like finding the first marked bit and clearing it.
Fixed a bug in VelocityTracker where the wrong pointer trace
could get cleared when handling ACTION_POINTER_DOWN. Oops.
Changed PointerCoords so it no longer stores useless zero
axis values. Removed editAxisValue because it is not very
useful when all zero value axes are absent and therefore
cannot be edited in place.
Added dispatch of stylus hover events.
Added support for distance and tool types.
Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
GraphicAllocator debugging cannot deal with
custom HAL formats. make this more obvious in the
log.
Change-Id: I202e58a7f213f32e725aa4eac62cdf6e50ca5894
We should use all-makefiles-under instead.
all-subdir-makefiles can be used only before any "include" statement.
Before this change, both subdirs were actually not included.
Change-Id: I6bf35d07f294a5012c9322096f999ac26e37432f
- fixed uninitialized variable
- set hint to indentity when transform is too complex
- make sure FrameBufferNativeWindow doesn't fail on needed perform commands
Bug: 4487161
Change-Id: I7cb2b0869b72404732eca7cb2d145ff669e2ed9b
This makes ANativeWindow_lock/ANativeWindow_unlockAndPost work
with ANativeWindows implemented by Surface and SurfaceTextureClient.
Also, Surface now inherits directly from SurfaceTextureClient.
Bug: 5003724
Change-Id: I9f285877c7bae9a262e9a7af91c2bae78804b2ef
This change fixes how the Android EGL layer overrides the size and
format of an ANativeWindow in eglCreateWindowSurface. The new behavior
is to leave the size untouched when overriding the format. The previous
behavior was to reset the ANativeWindow to use the default size set by
the ANativeWindow implementation.
It also adds two new 'perform' methods to the ANativeWindow interface:
set_buffers_dimensions and set_buffers_format, and redefines the
behavior of set_buffers_geometry to be the combination of these two new
methods.
Additionally, this change adds an error check for the return value of
the new native_window_set_buffers_format call, which required adding a
(stub) handler for to FramebufferNativeWindow.
Change-Id: I805c7ccd8d4730dfb132d10d8bc3fb058a0b9df1
- renderscript now calls EGL directly instead of relying on this function
- surfaceflinger also does its own EGLConfig selection
- selectConfigForPixelFormat stays for legacy reason (many tests use it) but
it now only tries to match the alpha channel of the format rather than the
format itself.
this will allow implementations who don't support the exact formats
defined in the HAL to work properly.
Bug: 4998223
Change-Id: Ic664dfc14d5072a514b6f77a115d1521bfc1578f
Fixed some issues where inconsistent streams of events could
be generated by the dispatcher, particularly when switching from
hovering with one device to hovering with another.
Fixed a bug where the touch pad would fail to generate a new
HOVER_MOVE following a tap event. As a result, the hover event
stream would not resume until the user touched the touch pad
again.
Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
Bug: 4364920
Velocity damping proved to be a bad idea because it would
cause a significant ramp in velocity at the beginning of
a gesture, instead of the desired smooth behavior. Oh well.
Change-Id: Ie631946f47ef2492bd71fbed1ab44bbb39a875a8
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: Ib647dbd7a57a7f30dd9c6e2c260df51d7bbdd18e
Some drivers report individual finger updates one at a time
instead of all at once. When 10 fingers are down, this can
cause the framework to have to handle 10 times as many events
each with 10 times as much data. Applications like
PointerLocation would get significantly bogged down by all
of the redundant samples.
This change coalesces samples that are closely spaced in time,
before they are dispatched, as part of the motion event batching
protocol.
Increased the size of the InputChannel shared memory buffer so
that applications can catch up faster if they accumulate a
backlog of samples.
Change-Id: Ibc6abf8af027d9003011ac75caa12941080caba3
Replaced VelocityTracker with a faster and more accurate
native implementation. This avoids the duplicate maintenance
overhead of having two implementations.
The new algorithm requires that the sample duration be at least
10ms in order to contribute to the velocity calculation. This
ensures that the velocity is not severely overestimated when
samples arrive in bursts.
The new algorithm computes the exponentially weighted moving
average using weights based on the relative duration of successive
sample periods.
The new algorithm is also more careful about how it handles
individual pointers going down or up and their effects on the
collected movement traces. The intent is to preserve the last
known velocity of pointers as they go up while also ensuring
that other motion samples do not count twice in that case.
Bug: 4086785
Change-Id: I95054102397c4b6a9076dc6a0fc841b4beec7920
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I7b7ddacc724fb1306e1590dbaebb740d3130d7cd
Added the concept of pointer properties in a MotionEvent.
This is currently used to track the pointer tool type to enable
applications to distinguish finger touches from a stylus.
Button states are also reported to application as part of touch events.
There are no new actions for detecting changes in button states.
The application should instead query the button state from the
MotionEvent and take appropriate action as needed.
A good time to check the button state is on ACTION_DOWN.
As a side-effect, applications that do not support multiple buttons
will treat primary, secondary and tertiary buttons identically
for all touch events.
The back button on the mouse is mapped to KEYCODE_BACK
and the forward button is mapped to KEYCODE_FORWARD.
Added basic plumbing for the secondary mouse button to invoke
the context menu, particularly in lists.
Added clamp and split methods on MotionEvent to take care of
common filtering operations so we don't have them scattered
in multiple places across the framework.
Bug: 4260011
Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
First step of improving app screen size compatibility mode. When
running in compat mode, an application's windows are scaled up on
the screen rather than being small with 1:1 pixels.
Currently we scale the application to fill the entire screen, so
don't use an even pixel scaling. Though this may have some
negative impact on the appearance (it looks okay to me), it has a
big benefit of allowing us to now treat these apps as normal
full-screens apps and do the normal transition animations as you
move in and out and around in them.
This introduces fun stuff in the input system to take care of
modifying pointer coordinates to account for the app window
surface scaling. The input dispatcher is told about the scale
that is being applied to each window and, when there is one,
adjusts pointer events appropriately as they are being sent
to the transport.
Also modified is CompatibilityInfo, which has been greatly
simplified to not be so insane and incomprehendible. It is
now simple -- when constructed it determines if the given app
is compatible with the current screen size and density, and
that is that.
There are new APIs on ActivityManagerService to put applications
that we would traditionally consider compatible with larger screens
in compatibility mode. This is the start of a facility to have
a UI affordance for a user to switch apps in and out of
compatibility.
To test switching of modes, there is a new variation of the "am"
command to do this: am screen-compat [on|off] [package]
This mode switching has the fundamentals of restarting activities
when it is changed, though the state still needs to be persisted
and the overall mode switch cleaned up.
For the few small apps I have tested, things mostly seem to be
working well. I know of one problem with the text selection
handles being drawn at the wrong position because at some point
the window offset is being scaled incorrectly. There are
probably other similar issues around the interaction between
two windows because the different window coordinate spaces are
done in a hacky way instead of being formally integrated into
the window manager layout process.
Change-Id: Ie038e3746b448135117bd860859d74e360938557
query() does not modify the object's data, so it needs to be a const method
Change-Id: I67c40a3c865461e6f1cc2193fd2d74286ff6ac8f
Signed-off-by: Iliyan Malchev <malchev@google.com>
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: I5126b1e69d95252fda7f2a684c9287e239a57163
Some drivers report individual finger updates one at a time
instead of all at once. When 10 fingers are down, this can
cause the framework to have to handle 10 times as many events
each with 10 times as much data. Applications like
PointerLocation would get significantly bogged down by all
of the redundant samples.
This change coalesces samples that are closely spaced in time,
before they are dispatched, as part of the motion event batching
protocol.
Increased the size of the InputChannel shared memory buffer so
that applications can catch up faster if they accumulate a
backlog of samples.
Added logging code to help measure input dispatch and drawing
latency issues in the view hierarchy. See ViewDebug.DEBUG_LATENCY.
Change-Id: Ia5898f781f19901d2225c529a910c32bdf4f504f
a memory corruption happned when the buffer pool was resized
(like when playing a video or using camera) and there was
no current active buffer. In this case, the faulty code
would index into an array at position -1 which corrupted
24 bytes of data.
also improved region validation code (ifdef'ed out by default)
Bug: 4093196
Change-Id: I915c581d131148959d720e00e3892e9186ab733d
Replaced VelocityTracker with a faster and more accurate
native implementation. This avoids the duplicate maintenance
overhead of having two implementations.
The new algorithm requires that the sample duration be at least
10ms in order to contribute to the velocity calculation. This
ensures that the velocity is not severely overestimated when
samples arrive in bursts.
The new algorithm computes the exponentially weighted moving
average using weights based on the relative duration of successive
sample periods.
The new algorithm is also more careful about how it handles
individual pointers going down or up and their effects on the
collected movement traces. The intent is to preserve the last
known velocity of pointers as they go up while also ensuring
that other motion samples do not count twice in that case.
Bug: 4086785
Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
This change adds a query to the ANativeWindow interface for getting the
concrete type of the ANativeWindow.
Bug: 4086509
Change-Id: I64aa86d72fbca3b52a98e1fc35608737781a3178
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
Associate each motion axis with the source from which it comes.
It is possible for multiple sources of the same device to define
the same axis. This fixes new API that was introduced in MR1.
(Bug: 4066146)
Fixed a bug that might cause a segfault when using a trackball.
Only fade out the mouse pointer when touching the touch screen,
ignore other touch pads.
Changed the plural "sources" to "source" in several places in
the InputReader where we intend to refer to a particular source
rather than to a combination of sources.
Improved the batching code to support batching events from different
sources of the same device in parallel. (Bug: 3391564)
Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
Ensure that the joystick can always reach -1.0, 0.0 and 1.0 positions
even when noise filtering is applied. (Bug: 3514510)
Add support for a few more standard axes.
Add additional mapping modes for axes.
Some axes are inverted from standard interpretation
or are actually intended to be split into two distict axes
such as left/right trigger controls or accelerator/brake.
Add key layout file for a G25 racing wheel and XBox 360 controller
to tweak behavior. They work fine without them but the axis mappings
are not ideal.
Change-Id: I0fddd90309af4dc14d35f34fe99ed6e521c0b7c7
Added some plumbing to enable the policy to intercept motion
events when the screen is off to handle wakeup if needed.
Added a basic concept of an external device to limit the scope
of the wakeup policy to external devices only. The wakeup policy
for internal devices should be based on explicit rules such as
policy flags in key layout files.
Moved isTouchEvent to native.
Ensure the dispatcher sends the right event type to userActivity
for non-touch pointer events like HOVER_MOVE and SCROLL.
Bug: 3193114
Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
Fades out the mouse pointer:
- after 15 seconds of inactivity normally
- after 3 seconds of inactivity in lights out mode
- after a non-modifier key down
- after a touch down
Extended the native Looper to support enqueuing time delayed
messages. This is used by the PointerController to control
pointer fade timing.
Change-Id: I87792fea7dbe2d9376c78cf354fe3189a484d9da
Added support for tracking the mouse position even when the mouse button
is not pressed. To avoid confusing existing applications, mouse movements
are reported using the new ACTION_HOVER_MOVE action when the mouse button
is not pressed.
Added some more plumbing for the scroll wheel axes. The values are
reported to Views but they are not yet handled by the framework.
Change-Id: I1706be850d25cf34e5adf880bbed5cc3265cf4b1
Added API on InputDevice to query the set of axes available.
Added API on KeyEvent and MotionEvent to convert keycodes and axes
to symbolic name strings for diagnostic purposes.
Added API on KeyEvent to query if a given key code is a gamepad button.
Added a new "axis" element to key layout files to specify the
mapping between raw absolute axis values and motion axis ids.
Expanded the axis bitfield to 64bits to allow for future growth.
Modified the Makefile for keyboard prebuilts to run the keymap
validation tool during the build.
Added layouts for two game controllers.
Added default actions for game pad button keys.
Added more tests.
Fixed a bunch of bugs.
Change-Id: I73f9166c3b3c5bcf4970845b58088ad467525525
This change makes it possible to extend the set of axes that
are reported in MotionEvents by defining new axis constants.
The MotionEvent object is now backed by its C++ counterpart
to avoid having to maintain multiple representations of the
same data.
Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
EGLUtils::selectConfigForPixelFormat() now uses EGL_NATIVE_VISUAL_ID
to select a config with the proper format. this is more robust and
future proof.
Change-Id: I7245d904adab1e339f062b9b498ddd9324cfe7a4
list the purgatory, which shows windows that have been closed,
but for which the client still has references.
Change-Id: I5168bb88cb328d5d77d71d0871deb9190f493126
Added support for loading the pointer icon from a resource.
Moved the system server related bits of the input manager out
of libui and into libinput since they do not need to be linked into
applications.
Change-Id: Iec11e0725b3add2b905c51f8ea2c3b4b0d1a2d67
Some parts stubbed out but you can plug in a mouse and move
a green cursor around to interact with the UI.
Change-Id: I80d597a7f11d3bd92041890f74b3c77326975e6e
This change enables the framework to synthesize key events to implement
default behavior when an application does not handle a key.
For example, this change enables numeric keypad keys to perform
their associated special function when numlock is off.
The application is informed that it is processing a fallback keypress
so it can choose to ignore it.
Added a new keycode for switching applications.
Added ALT key deadkeys.
New default key mappings:
- ESC -> BACK
- Meta+ESC -> HOME
- Alt+ESC -> MENU
- Meta+Space -> SEARCH
- Meta+Tab -> APP_SWITCH
Fixed some comments.
Fixed some tests.
Change-Id: Id7f3b6645f3a350275e624547822f72652f3defe
some of these failures are not fatal and even expected in some cases
so they should not emit a dump in the log in those cases.
Change-Id: Idcfa252e3bfa9d74e27fe4ad8f8623aa01aa9c5e
Use Vendor ID, Product ID and optionally the Version to
locate keymaps and configuration files for external devices.
Moved virtual key definition parsing to native code so that
EventHub can identify touch screens with virtual keys and load
the appropriate key layout file.
Cleaned up a lot of old code in EventHub.
Fixed a regression in ViewRoot's fallback event handling.
Fixed a minor bug in FileMap that caused it to try to munmap
or close invalid handled when released if the attempt to map
the file failed.
Added a couple of new String8 conveniences for formatting strings.
Modified Tokenizer to fall back to open+read when mmap fails since
we can't mmap sysfs files as needed to open the virtual key
definition files in /sys/board_properties/.
Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
The ShortcutManager used to only receive the key code of the key event
that triggered the shortcut. This change now provides the shortcut
manager with the whole key event so it can look up the associated
character using the correct key character map.
To make this more efficient, added a mechanism for recycling
key events. At the moment it is only used by key events owned by the
system process, since clients of the existing API (such as Views)
might continue to hold on to key events after dispatch has finished so
they would break if the key event were recycled by the framework.
Deprecated KeyCharacterMap.BUILT_IN_KEYBOARD.
Change-Id: I4313725dd63f2be01c350c005a41c7fde9bc67e8
Fixed a bug with dpad keys on external keyboards being rotated
according to the display orientation by adding a new input device
configuration property called "keyboard.orientationAware".
Added a mechanism for overriding the key layout and key character
map in the input device configuration file using the new
"keyboard.layout" and "keyboard.characterMap" properties.
Also added "trackball.orientationAware", "touch.orientationAware" and
"touch.deviceType" configuration properties.
Rewrote the configuration property reading code in native code
so that it can be used by EventHub and other components.
Added basic support for installable idc, kl, and kcm files
in /data/system/devices. However, there is no provision for
copying files there yet.
Disabled long-press character pickers on full keyboards so that
key repeating works as expected.
Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
Also added a validation tool for keymaps (not currently integrated
into the build system but getting there).
This change brings back Android.mk with the intent that it will
be used to validate keymaps in a later change.
Added some missing keys that are present on phones.
Bug: 3215210
Bug: 3225421
Change-Id: Id817c6e2215164616942c51a42752915d9ceacd3
Allow the overlay object to be destroyed whenever the destroy is
invoked. Currently the destroy call returns if there is an error
encountered, which results in open data and control channels.
Change-Id: I1f2ef4ebb5fb1dcabf05ab50b5bbf6e5e240a63a
BREAKING CHANGE: Redesigned the key character map format to
accomodate full keyboards with more comprehensive suite of modifiers.
Old key character maps will not work anymore and must be updated.
The new format is plain text only and it not compiled to a binary
file (so the "kcm" tool will be removed in a subsequent check-in).
Added FULL keyboard type to support full PC-style keyboards.
Added SPECIAL_FUNCTION keyboard type to support special function
keypads that do not have any printable keys suitable for typing
and only have keys like HOME and POWER
Added a special VIRTUAL_KEYBOARD device id convention that maps
to a virtual keyboard with a fixed known layout. This is designed
to work around issues injecting input events on devices whose
built-in keyboard does not have a useful key character map (ie.
when the built-in keyboard is a special function keyboard only.)
Modified several places where events were being synthesized
to use the virtual keyboard.
Removed support for the "qwerty" default layout.
The new default layout is "Generic". For the most part "qwerty"
was being used as a backstop in case the built-in keyboard did
not have a key character map (probably because it was a special
function keypad) and the framework needed to be able to inject
key events anyways. The latter issue is resolved by using the
special VIRTUAL_KEYBOARD device instead of BUILT_IN_KEYBOARD.
Added the concept of a key modifier behavior so that
MetaKeyKeyListener can distinguish between keyboards that use
chorded vs. toggled modifiers.
Wrote more robust key layout and key character map parsers
to enable support for new keyboard features and user installable
key maps.
Fixed a bug in InputReader generating key ups when keys
are released out of sequence.
Updated tons of documentation.
Currently QwertyKeyListener is being used for full keyboards
with autotext and capitalization disabled. This mostly works
but causes some problems with character pickers, etc.
These issues will be resolved in subsequent changes.
Change-Id: Ica48f6097a551141c215bc0d2c6f7b3fb634d354
This change fixes a bug in the dispatcher where the window manager
policy would incorrectly receive a key repeat count of 0 in the case
where the key repeat was generated by the hardware or driver.
Long-press on HOME was broken as a result.
Repeating keys could also get stuck down.
Bug: 3159581
Bug: 3208156
Change-Id: I1145487cfcc41a7850dba4cafc63c4a5951ace5b
New default only applies to applications with targetSdkVersion >=
HONEYCOMB. Old applications default to no touch splitting for
their windows.
In addition, enabled split touch for various system windows.
Bug: 3049580
Change-Id: Idc8da9baa2cd8e1e4e76af8967d7b6a5ccb94427
Refactored ViewRoot, NativeActivity and related classes to tell the
dispatcher whether an input event was actually handled by the application.
This will be used to move more of the global default key processing
into the system server instead of the application.
Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
This change defines a macro NUM_FRAME_BUFFERS to set
the desired number of framebuffers to be used by the UI,
instead of hard-coding 2 framebuffers.
Aditional logic has been added to handle the initialization
and destruction of NUM_FRAME_BUFFERS buffers.
Change-Id: I3a4bfec3e0f453432f2ffebf084c00f574d3be46
Signed-off-by: Rodrigo Obregon <robregon@ti.com>
This change fixes a bug in the dispatcher where the window manager
policy would incorrectly receive a key repeat count of 0 in the case
where the key repeat was generated by the hardware or driver.
Long-press on HOME was broken as a result.
Bug: 3159581
Change-Id: If0f02662313f5b879a4e566fbb461389e274a550
This optimization is currently disabled until Launcher is
modified to take advantage of it. The optimization can be
enabled by turning on RENDER_LAYERS_AS_REGIONS in the
OpenGLRenderer.h file.
Change-Id: I2fdf59d0f4dc690a3d7f712173ab8db3848b27b1
Two issues:
1. First, due to an inverted conditional in the input dispatcher, we were
reporting touches as long touches and vice-versa to the power manager.
2. Power manager user activity cheek event suppression also suppresses touch
events (but not long touch or up events). As a result, if cheek event
suppression was enabled, touches would not poke the user activity timer.
However due to the above logic inversion, this actually affected long
touches. Net result, if cheek suppression was enabled in the power manager
and you held your thumb on the screen long enough, the phone would
go to sleep!
Cheek event suppression is commonly turned on when making a phone call.
Interestingly, it does not seem to get turned off afterward...
This change fixes the logic inversion and exempts touches from the cheek
suppression. The reason we do the latter is because the old behavior
was actually harmful in other ways too: a touch down would be suppressed
but not a long touch or the touch up. This would cause bizarre behavior
if you touched the screen while it was dimmed. Instead of brightening
immediately, it would brighten either when you lifted your finger or
300ms later, whichever came first.
Bug: 3154895
Change-Id: Ied9ccec6718fbe86506322ff47a4e3eb58f81834
Rewrote interceptKeyBeforeQueueing to make the handling more systematic.
Behavior should be identical except:
- We never pass keys to applications when the screen is off and the keyguard
is not showing (the proximity sensor turned off the screen).
Previously we passed all non-wake keys through in this case which
caused a bug on Crespo where the screen would come back on if a soft key
was held at the time of power off because the resulting key up event
would sneak in just before the keyguard was shown. It would then be
passed through to the dispatcher which would poke user activity and
wake up the screen.
- We propagate the key flags when broadcasting media keys which
ensures that recipients can tell when the key is canceled.
- We ignore endcall or power if canceled (shouldn't happen anyways).
Changed the input dispatcher to not poke user activity for canceled
events since they are synthetic and should not wake the device.
Changed the lock screen so that it does not poke the wake lock when the
grab handle is released. This fixes a bug where the screen would come
back on immediately if the power went off while the user was holding
one of the grab handles because the sliding tab would receive an up
event after screen turned off and release the grab handles.
Fixed a couple of issues where media keys were being handled inconsistently
or not at all, particularly in the case of the new PAUSE, PLAY
and RECORD keys.
Bug: 3144874
Change-Id: Ie630f5fb6f128cfdf94845f9428067045f42892c
This patch makes the dispatcher drop all of its state when it is
disabled (when the screen turns off). This ensures that the dispatcher
does not get stuck thinking a pointer is still down if the screen
turned off while the user was touching the display (such as a fat touch
while hitting the power button).
Bug: 3098344
Change-Id: If50ef5804870aa1acd3179fd4b40e3cda58dd39d
Fixed a bug where we would lose the first touch point when swiping out of
the virtual key area.
Fixed a bug where we would not send an ACTION_MOVE event in cases where
individual pointers went down/up and the remaining pointers actually moved.
This is important since many applications do not handle pointer movements
during ACTION_POINTER_DOWN or ACTION_POINTER_UP. In the case of
ACTION_POINTER_UP the movement was completely lost since all pointers were
dispatched using their old location rather than the new location.
Improved motion event validation to check for duplicate pointer ids.
Added an input source constant that was missing from the NDK api but
defined in the framework api.
Added a timestamp when reporting added/removed devices in EventHub.
Bug: 3070082
Change-Id: I3206a030f43b7616e2f48006e5a9d522c4d92e56
Compute the actual number of indices in the GAMEPAD_KEYCODES instead of
the pure size in bytes.
Bug: 3121536
Change-Id: I71edbd8bf6eff2c8cc0ea5c6845362b3d1e06466
