If available, surfaceflinger will use the hwc setCursorPositionAsync()
api to change the position of supported cursor layers outside of
the usual prepare/set loop.
Change-Id: Ib3fc5c0c390b3489ddbba202379840a1d2748917
Bug: 15116722
- Adds a sticky transform field that can be set from a
SurfaceFlinger client Surface. This transform is
added to any transform applied to the Surface.
Change-Id: Idaa4311dfd027b2d2b8ea5e2c6cba2da5779d753
Sideband streams are essentially a device-specific buffer queue that
bypasses the BufferQueue system. They can be used for situations with
hard real-time requirements like high-quality TV and video playback
with A/V sync. A handle to the stream is provided by the source HAL,
and attached to a BufferQueue. The sink HAL can read buffers via the
stream handle rather than acquiring individual buffers from the
BufferQueue.
Change-Id: Ib3f262eddfc520f4bbe3d9b91753ed7dd09d3a9b
Add the ability to ignore layers' transformation matrices during
screenshot capture, which will allow the window manager to capture
unrotated images for recents during the device rotation animation.
Bug: 11805195
Change-Id: I854d87bc84ca06ef9a054a454af1c080ee66fbb8
Moves the "opaque layer" from Layer to Layer::State. This allows
it to be updated as part of a transaction.
Bug 12387406
Change-Id: I0a114ce6adf77cd12fb08f96e0691b76c475768d
the main reason for doing this is so that we can have
access to informations about a texture (like its dimension)
close to where we generate and use shaders in ES 2.0.
Previously, there wasn't any way to get to a texture's size
from a RenderEngine implementation.
Bug: 8679321
Change-Id: I388b338a70d07e3e8177dde248710ea1e4c82dff
the Mesh object can be part of each Layer (at least currently).
also reworked the Mesh code a bit to make it easier to access
the vertex data.
Change-Id: I0490851ba898f0aa2e55b62958dcd8bdb535e98b
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
When a buffer had a crop (meaning its content is scaled to the window size)
and a window crop was defined, the resulting crop couldn't be expressed
properly because h/w composer's API was limited to integers, since
this is fixed in h/w composer 1.3, we take adventage of this to
make sure we get the correct crop.
this bug could result in the buffer being scaled by an incorrect ratio and
be slightly offset; moreover, it would produce different results from the
GL code path, which is always correct.
Change-Id: I8e20e00b6e26177d14f4ab4d2cd581e26c818892
this is the first step to add support for GLES 2.x, this
change breaks the dependency of SF on GLES 1.x by moving
all operation into their own class.
Bug: 8679321
Change-Id: I0d2741eca2cefe67dfd9cf837cac10c4d126928b
- most methods on Layer didn't need to be virtual
- more consistency in naming drawing/current state
Change-Id: Ieb7b4951b40fc673b807994ed21ae4aea7281068
colorize a bit the output of dumpsys SurfaceFlinger to
make it easier to read. Right now it will bold the
title of each section and use green for the name of
each layer.
Change-Id: I0d9f18d115401cb45109d244ef3a278481f68cc6
since the transparent region hint really depends on the
content of the window containing the SurfaceView
(it's calculated by the view hierarchy based on
overlapping views), it makes sense to latch it only when
the content of the window (the app) changes.
This should help fixing drawing artifacts when changing the
layout of a window containing a SurfaceView.
Bug: 8511430
Change-Id: Ic3aa668495293cb4d82a2cd7dcf3b6a337287678
ISurface was only used to get the IGraphicBufferProducer from
a Layer. It's now replaced by a BBinder subclass / IBinder and
is only used as a handle to the surface, to both refer to it
and manage its life-time.
Also cleaned-up a bit the ISurfaceComposer interface and
"create layer" code path.
Change-Id: I68d0e02d57b862cffb31d5168c3bc10cea0906eb
The functionality of LayerBase and Layer is folded
into Layer. There wasn't a need for this abstraction
anymore.
Change-Id: I66511c08cc3d89009ba4deabf47e26cd4cfeaefb
- SurfaceFlinger now supports to take a screenshot
directly into an IGraphicBufferProducer
- reimplement the IMemoryHeap screenshot on top
of the above
- reimplement LayerScreenshot such that its
BufferQueue is directly used as the destination
of the screenshot. LayerScreenshot is now a thin
wrapper around Layer
Bug: 6940974
Change-Id: I69a2096b44b91acbb99eba16f83a9c78d94e0d10
- the crop region is now always calculated and set
in LayerBase::setGeometry which uses new virtuals to
access the "content" crop and transform (which are
provided by the Layer subclass)
Change-Id: Ib7769bdec0917dd248f926600c14ddf9ea84897a
This change makes the 'dumpsys SurfaceFlinger --latency' command with no extra
args dump the frame timestamp data for the most recent frames that
SurfaceFlinger generated that included window animation transaction changes.
Change-Id: I8bded1ea08a4cddefef0aa955401052bb9107c90
Rearranges updateTexImage() so that the SurfaceFlinger-specific
behavior is in a new SurfaceFlingerConsumer subclass.
SurfaceTexture behavior should not be altered. Instead of
acquire-bind-release we now do acquire-release-bind, but since
it's all done with the lock held there shouldn't be any
externally-visible change.
Change-Id: Ia566e4727945e2cfb9359fc6d2a8f8af64d7b7b7
if a layer is not mirrored, we now use its display
as the source for the transfrom hint calculation
instead of always using the default (main) display.
this change does two thing:
1) we make updateTransformHint take a DisplayDevice
as a parameter instead of hard-coding the
main display.
2) each time we do a transaction that could change
the hint, we go through all layers and
figure out which display should be used for their
transform hint.
Bug: 7599344
Change-Id: I9b04a95e6c372dd770bacf81d8ef6f8e31b87b83
This change moves the frame time history tracking code out of Layer and into a
new class called FrameTracker. It also changes the tracking to use signal
timestamps from fences when available for more accurate results.
Change-Id: I323c5f075c58bf86ce363b52af885ad0f6365f2b
This prevents strong reference cycles when the listener implementation also
holds a strong pointer to the ConsumerBase
Bug: 7425644
Change-Id: I1514b13a32b18d421c902dddebec0765a989c55c
The hints were being set a little too late, so the pre-rotation stuff
wasn't quite working.
Bug 7054997
Change-Id: Id8d5c626db7a76f768ba762a145b315878ee08e6
DisplayDevices are now keyed of the wp<IBinder> the client uses.
DisplayID has now become DisplayType which is just used to identify
physical displays (as opposed to virtual displays such as wifi displays).
Change-Id: I0c5968f2c902dcd699a7e0afacf833ff070c12ea
it's safer this way because this object owns an
EGLSurface which cannot be easily reference-counted.
it also gives us the ability to sub-class it, which
we might want to do soon.
Change-Id: I07358bb052dc5a13b4f2196b2c2b6e6e94c4bb4f
- fix typo drawForSreenshot misspelled
- get rid of DisplayDeviceBase
- removed unused or unneeded code
- always pass a DisplayDevice to Layer methods that are called
on a per-display basis (to make it clear that this could be
called more than once per composition).
Change-Id: Id948b7e09fe5c06db0e42d40d6ed75dd095c7f44
- remove dependency on cached state in validateVisibility
- get rid of mVertices and mTransformedBounds
- get rid of validateVisibility
- get rid of unlockPageFlip
- handleTransaction now returns a dirty region
- computevisibileregion now uses window-manager space
After a HWC set, each SurfaceFlinger Layer retrieves the release fence
HWC returned and gives it to the layer's SurfaceTexture. The
SurfaceTexture accumulates the fences into a merged fence until the
next updateTexImage, then passes the merged fence to the BufferQueue
in releaseBuffer.
In a follow-on change, BufferQueue will return the fence along with
the buffer slot in dequeueBuffer. For now, dequeueBuffer waits for the
fence to signal before returning.
The releaseFence default value for BufferQueue::releaseBuffer() is
temporary to avoid transient build breaks with a multi-project
checkin. It'll disappear in the next change.
Change-Id: Iaa9a0d5775235585d9cbf453d3a64623d08013d9
HWComposer must abstract the HWC HAL entirely, so that the
HAL can continue to evolve (and break binary compatibility)
without breaking SurfaceFlinger. The HWC data structure had
leaked outside of HWComposer, this is now fixed.
We now have an abstract interface that provide all the
needed functionality, HWCompose provides concrete
implementations of it based on the the HWC version.
Change-Id: I40c4676dc986b682ede5520a1c60efe64037b0bb
This change adds a crop rectangle specified in window coordinates to the layer
state. The all window pixels outside this crop rectangle are treated as though
they were fully transparent. This change also adds the plumbing necessary for
WindowManager to set that crop.
Change-Id: I582bc445dc8c97d4c943d4db8d582a6ef5a66081
