This change reduces the shrinking of the crop rectangle in some cases. It adds
a way to inform the SurfaceTexture that its texture will be used without
bilinear interpolation, and uses knowledge of the pixel format to avoid
shrinking unecessarily.
Change-Id: I72365f39f74ecb7fcc51b4cf42f2d0fa97727212
This change adds support for specifying a crop rectangle to a
SurfaceTextureClient that is in post-transformed coordinate space.
Change-Id: I247901de343e71b32850f7ae3bac62dfa612ad3d
Bug: 6299171
This change adds the plumbing to SurfaceTextureClient, BufferQueue, and
SurfaceTexture to get the active rectangle passed to the ANativeWindow to
the buffer consumer.
Change-Id: I35da0889b266327ebb079b6a7136fa3e2e8b00e6
SurfaceTexture will modify the crop rect so it matches
the desired output aspect ratio when the scaling
mode is NATIVE_WINDOW_SCALING_MODE_CROP. Added a test
for this new scaling mode.
Change-Id: I60f24dcbc294b65cd10a393d9e27d40f07d27bb6
BufferQueue's disconnect could race with updateTexImage
where invalid buffers could be released. Additionally
fixed similar bug with setBufferCount. Tests were added
to stress the disconnect mechanism.
Change-Id: I9afa4c64f3e025984e8a9e8d924852a71d044716
This change adds the detachFromContext and attachToContext methods to
SurfaceTexture. These methods allow the SurfaceTexture to switch from
one consumer GLES context to another. This change also includes a few
cleanups to the error return codes in updateTexImage.
Change-Id: I0df1eb599aa7b6f58f07431f242f8f09269559ed
This change adds a check to SurfaceTexture::updateTexImage to verify
that the current GL context is the same as the one that was used for
previous updateTexImage calls.
Change-Id: If02d2f787bcfdb528046dc9ddf6665f8a90e1bf4
This change adds a new callback for BufferQueue consumers to be notified
when the BufferQueue frees some or all of its buffers. This is needed
to retain SurfaceTexture behavior where all buffers would be freed when
the producer disconnects. This change also modifies the
SurfaceTextureGLToGLTest.EglDestroySurfaceUnrefsBuffers test to catch
when the buffers are not freed.
The implementation is a little complicated because it needs to avoid
circular sp<> references across what will be a binder interface (so wp<>
can't be used directly). It also needs to avoid the possibility of
locking the BufferQueue and consumer (e.g. SurfaceTexture) mutexes in
the wrong order.
This change also includes a few additional fixes and test cleanups.
Change-Id: I27b77d0af15cb4b135f4b63573f634f5f0da2182
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: I938e63e085128148c58d0e26c7213b30145c109f
Refactored SurfaceTexture and BufferQueue such that share
no protected members. Created an consumer facing interface
for BufferQueue in preparation of connecting SurfaceTexture
and BufferQueue through a binder.
Change-Id: Iff55e740e36a7f70c9f7a17ee7a5af38e3d21f0f
This change adds a compile-time option for SurfaceTexture to use the
EGL_KHR_fence_sync extension to synchronize access to Gralloc buffers.
Bug: 5122031
Change-Id: I7e973a358631fff5308acf377581b811911fe790
This change explicitly sets swap interval 1 on the window when an
EGLSurface is created to render to it.
Change-Id: I91eb29dbee3ae4a55076b921f084d503fbe94e03
Surface Texture dequeue logic is modified to return the oldest of the
free buffers to Client on dequeue call.
Currently dequeue method is returning the first buffer index which is free.
The parsing is done in ascending order of the buffer slot indices.
This leads to returning the buffer which has been just queued to composer,
and hence display, and this defeats the purpose of having minimum dequeue count
as 2 in asynchrnouse mode.
This is fixed by checking all the free slots and returning the oldest buffer.
Change-Id: Ibbac10593c3994c278c601af0480b171635ecdd4
Signed-off-by: Sunita Nadampalli <sunitan@ti.com>
This change adds a hack to allow Android Browser to use a SurfaceTexture
to stream RGBA images to a GL_TEXTURE_2D texture object.
Change-Id: Idb90064d5d4b920959ef3be7451362ac5012460e
This change adds support for setting a string that can be used to
identify a SurfaceTexture object in log messages.
Change-Id: Ib4ee085f36c8830dc964c05ef1654f5a55dfcd60
we were not reseting mCurrentTexture in some situations
which in turn caused dequeueBuffers() return a
"FREE" buffer that was also current.
Very often it was harmless, but it created a race with
updateTexImage() which could cause the following
queueBuffers() to fail.
Bug: 5156325
Change-Id: If15a31dc869117543d220d6e5562c57116cbabdb
we now make sure to drain the buffer queue on disconnect.
this happens only when in synchrnous mode. in async mode
we clear all buffers except the head of the queue.
for extra safety we also catch the null pointer
in updateTexImage (which should never happen) and return
an error.
Bug: 5111008
Change-Id: I5174a6ecbb0de641c6510ef56a611cbb4e9e1f59
this simplifies the code a bit and also makes sure
we reevaluate mAbandoned and mConnectedApi each time
we come back from waiting on mDequeueCondition
Change-Id: I1f8538b62ad321b51ed79d953b700036daba796d
- also log a warning when freeAllBuffers is called with a non empty buffer queue
- rename freeAllBuffers to freeAllBuffersLocked
Change-Id: Idb71fdcf233b9ccae62d5a2a7c3c4bad2501d877
the first time a surface was connected, the values returned
by query NATIVE_WINDOW_DEFAULT_{WIDTH|HEIGHT} and
NATIVE_WINDOW_TRANSFORM_HINT were wrong until a call
to queueBuffer was performed.
Bug: 5137366, 5121607
Change-Id: I7ac6b5b0daa876638f6bed7c20f286a6e6d984f6
This change removes support for conditionally using the GL_TEXTURE_2D
target for SurfaceTexture textures with RGB buffers. It also enables
and fixes the RGB-based SurfaceTexture tests.
Change-Id: I9a251a981cf66af6b048b2e4c3fe7231e4774f4d
This change adds the 'abandon' method to the SurfaceTexture C++ class.
This method may be used to put the SurfaceTexture in an abandoned state,
causing all ISurfaceTexture methods to fail.
Change-Id: Ibd261f7b73f44e2bec36a8508bf92113cfb7cf95
This change makes the ANativeWindow connect and disconnect calls result
in an IPC to the SurfaceTexture object. This will allow us to prevent
multiple simultaneous connections from different processes.
Change-Id: Id9aa1003b1335b96ca6bd4a1f5a67aa433d42efb
This change alters the conditions under which the onFrameAvailable
callback gets called by the C++ SurfaceTexture class. The new behavior
is to call the callback whenever a frame gets queued that will be
visible to the buffer consumer. This means that buffers queued in
synchronous mode always trigger the callback, as those buffers will
remain pending until they are consumed. Buffers queued in asynchronous
mode will only trigger the callback if there was not previously an
unconsumed buffer pending.
The new behavior means that a consumer should perform a draw operation
exactly once for every onFrameAvailable call that it recieves. This
change also modifies SurfaceFlinger and the SurfaceTexture JNI to
support of the new behavior.
Change-Id: I8b2c6e00961d3d58b11c6af50b555b6e4c5f5b40
This change moves the computation of the transform matrix out of
getTransformMatrix and instead performs the computation when
updateTexImage gets called. This is needed in order for
getTransformMatrix to succeed even if the buffers have been freed (e.g.
by changing the buffer count) because the computation depends upon the
properties of the current GraphicBuffer.
Change-Id: Ied541ab8747b7ad604f862717135f9a16a816be9
Bug: 4490420
This change fixes up some stale comments, member variable names, log
messages and disables a failing test.
Change-Id: Ic1d3344b18066cf710e4a42838b2417c6b1f2f6c
This change the binder protocol between SurfaceTextureClient
and SurfaceTexture. dequeueBuffer() now takes the requested
parameters for the buffer. SurfaceTexture decides if the
buffer needs to be reallocated and does the allocation
if needed. In that case it returns BUFFER_NEEDS_REALLOCATION
to tell SurfaceTextureClient that it needs to call
requestBuffer (which all parameters have been removed) to
acquire a pointer to the buffer.
dequeueBuffer and requestBuffer could be folded into a single
IPC call, but we chose to optimize the case where buffers are
not created and avoid some complexity in the marshalling code.
Change-Id: I097a7f6f40a3491e10f3f3742eab33999286c304
This leak was intentional, it was there to deal with the fact that
some gralloc implementations don't track buffer handles with
file-descriptors so buffers needed to stay alive until there were
registered, which is not guaranteed by binder transactions.
In this new implementation, we use a small BBinder holding a
reference to the buffer, which with tuck into the parcel. This forces
the reference to stay alive until the parcel is destroyed, which
is guaranteed (by construction) to happen after the buffer is
registered.
this allows the public facing API to not expose the previous hack.
Change-Id: I1dd6cd83679a2b7457ad628169e2851acc027143
