Blur layer need to capture screen shot to create to blur
effect. Hence need to take care any user defined orientation
as well.
Change-Id: I1c0478810d12661edf2586293bbed342a5b4dc7e
Dedupe rotation calculation code and make rotation a statically
available property in the DisplayDevice
Change-Id: Ic517ab0d2c05026cd6fa46d664aab7926be17b62
This patch works in addition to the following commit
re-implementing ro.sf.hwrotation:
7d283431ef
When using values of 90 and 270 for ro.sf.hwrotation the
LCD width and height also need to be swapped to display properly.
Change-Id: I2874fdb8f8d8b855df6d62d338c9a22360491973
NOTE: This patch does not fix the initial startup of bootanimation
* Previously HAL orientation sensor would always be replaced if the HAL
did not provide a rotation vector sensor as well. Practically no HAL
does, so the virtual sensor would always replace it.
* Add the virtual sensor only if the HAL does not provide it.
Change-Id: I50ad2cd6c60b53eddc4c6854997ec2e3dbff0d1a
* In KitKat and on most Samsung devices, the orientation sensor is
not getting registered, and makes the compass non-working in a lot
of apps. This patch enables the sensor for such devices.
Change-Id: I0ebba72ec4aa2cfa02c21a6daff0c356c6793fd0
(cherry picked from commit 98fa6f1152da759ef3eaf36cb16e0aaf2013376a)
The sensors API introduced a new flush() method that older binaries
won't have. For those, replace the firstFlush invocation with a
setDelay call since a lot of implementations interpreted that as
the initialization step.
We also don't want any kind of call to flush() to happen when it
isn't there, since it'll either hit a random OEM extension or
a memory address we really don't want to execute.
Change-Id: I26ce923fe385751fed7d1c483a53c074249f0620
sensorservice: Set the rate for pre-1.1 HALs _after_ activation
We want to be sure these are applied in the same sequence they
used to be...
Change-Id: Ied2ba08ed3c4bed3a80bac6ab5471fcea9ba2c09
If triple framebuffers are enabled, the number of acquired
buffers isn't increased by default. Set the count to one less
than the max buffers to make sure all three buffers come into
play.
Change-Id: I8fae1b5564fbea598e415a86b0a21c3449c92d87
Reserve HWC for VDS for WFD use case. During WFD usecase, sink usage
will contain GRALLOC_USAGE_PRIVATE_WFD flag.
When HWC is avoided, all virtual displays are composed using GLES.
This means that GLES composes directly into the sink buffer and
signals the consumer. Furthermore, it is expected that any color
conversion will be handled on the consumer side.
CRs-Fixed: 908380
Change-Id: I93ff54c79ece788b6caf3f4172835d8ac1362f62
- Add support to set animating layer for HWCLayers
- After hwc_prepare, dont override the compType of a layer to
HWC_FRAMEBUFFER if its for non-primary displays
Change-Id: Iac462778ce5fb9016290846146e62f80dcfafd5c
CRs-fixed: 922304
* The visible pointer icon when hovering or drawing with the stylus is
quite annoying when trying to actually draw with it. Turn it off by
default and add an option to turn it on.
Forward Port from CM-11.0
Change-Id: Ie4e9e6bcc48803b195d1615d83d6e36d663cc33a
When measuring GL latency with dumpsys, it's possible to hit a
race condition if the hardware is fast enough to complete rendering
the test cycle before the latency dump is requested, since it only
matches the latency for live layers (unless it's an animation. See
change I8bded1ea08a4cddefef0aa955401052bb9107c90)
So always save a reference to the last rendered SurfaceView frame,
and dump its values if there isn't an active one.
Change-Id: I740e9830161396ea955b5a53322bd8576b5136bc
Android 5.0 cannot form multitouch events from multiple input
devices. So it is not possible to report one touchpoint from the
stylus position and, at the same time, another touchpoint from a
finger touch. Instead, when a new input device starts up the currently
active input is cancelled. This is highly undesirable while writing
with the pen.
The easiest solution is to ignore non-stylus touch events while the
stylus is within range (hovering) of the touchscreen. For example,
N-trig digitizers implement this in hardware. But wacom digitizers do
report pen data simultaneously with touch data. This patch disables
(non-stylus) touch input within 50ms of stylus data. On my Galaxy
Note this is necessary to make stylus input usable.
Original commit by vbraun:
b9cb296130
Change-Id: I97f26369826e96c97461c8ae188f1c64dec1b4d3
Squashed commit of the following:
commit 012d3fe41d1d6cd38a0858b59145e9a4447641fa
Author: Hashcode <hashcode0f@gmail.com>
Date: Sun Dec 8 19:36:50 2013 +0000
sf: Always use opengles for screen capture
Go back to the usage of GRALLOC_USAGE_HW_TEXTURE and GRALLOC_USAGE_HW_RENDERER
in captureScreenImplLocked regardless of useReadPixels value
This fixes the EGL_NO_IMAGE_KHR error returned from
eglCreateImageKHR (blank images returned from screenshot path)
Change-Id: I62fe90a081607b9e89c67f3dcfd34c84efc89d35
commit 4866ddf98ac98d8e22a1cd6a21894bb17f274588
Author: Ricardo Cerqueira <cyanogenmod@cerqueira.org>
Date: Thu Oct 31 03:53:39 2013 +0000
Revert "remove support for glReadPixels screenshot path"
This reverts commit 3ca76f416b.
Conflicts:
include/gui/ISurfaceComposer.h
libs/gui/ISurfaceComposer.cpp
libs/gui/SurfaceComposerClient.cpp
services/surfaceflinger/SurfaceFlinger.cpp
services/surfaceflinger/SurfaceFlinger.h
Change-Id: I8c239e533757af770e418dbb198f5a86c736961f
Change-Id: I8c239e533757af770e418dbb198f5a86c736961f
This change is porting of following commits related to MDP3
1) SurfaceFlinger: Change to support framebuffer flip for 2D blitters
- Surfaceflinger does not flip framebuffers when there are
no layers marked for HWC_FRAMEBUFFER
- This change checks for the HWC_BLIT flag and will request a flip
to a new FB_TARGET buffer even if there are no FRAMEBUFFER layers
"Change-Id: I1cb44389a05c9ec049d7f0d39c288feccb11a91c"
2) SF: Avoid wormhole clear for BLIT calls
- Do not call GPU clear from SF when composition
type is BLIT as it'll be taken care in HAL.
"Change-Id: Ia613eb9b824c6484ecc8c8fa4ee883545d8541b8"
3) surfaceflinger: Allow gpu to render widevine level3
- Allow gpu to render widevine level3 but keep
blocking screen shots.
"Change-Id: I914232a062acbb7b17901dbf2b414973230e59d9"
Change-Id: I35eef9eb1597af21c195e07d5fe4c0c73ab3a269
Avoid disabling DispSync resync if app and SF events aren't
using phase offsets. This prevents hardware VSYNC from turning
on always whenever something needs to be drawn, thereby
bringing down the power numbers.
Change-Id: I83c8f79eb46b9fdaa730ec32767ebed3286347b8
- Set dim layer flag = 0x80000000 to send dim layer hint to HWC.
- Clear HWC_SKIP_LAYER flag when dim layer flag is set.
Change-Id: I56904c65fb487e6e89d4c057015443730d727299
Author: Prabhanjan Kandula<pkandula@codeaurora.org>
SF: Add support for inverse mounted panels.
Add 180 rotation in SF to account for inverse mounted panels.
The framework will be unaffected and use policies for a 0 mounted
panel. SF changes the global transform and silently induces the H,V
flips. Similar flips are added to screenshots as well.
CRs-Fixed: 894147
Change-Id: I6e9576ee734ee85097491eaa1e8e94cfb3731e0f
Author: Ramkumar Radhakrishnan<ramkumar@codeaurora.org>
SF: Clear visible region of layer appropriately.
Clear visible region of layer having layer stack id different than
the display layer stack id to ensure that the layer won't be present
on the wrong display layer list.
Change-Id: I59289fea63ec7a2451d4715cfe7926ba34fdb8e3
Change-Id: I5ad08a6013aa173d621ee80c766a6e19e1086a35
Add DisplayUtils class which uses the custom implementations
of ExLayer, ExSurfaceFlinger, ExHWComposer,
and ExVirtualDisplaySurface classes if needed
Change-Id: Ibdd8da5d3d0d602f42b76a15d0994c6aa98bee3f
This includes the following two changes squashed into one and
retaining the change I182f41edbaf9226fc62d6d17ee964998cd9f21f7
sf: Fixes for resolution change in SurfaceFlinger
1. Use active config from HWC when querying display attributes
When we query the display attributes we should use the active
config as reported by HWC in cases where HWC version is 1.4.
In all other cases we should revert to the default config,
config 0, as the active config.
2. Set/update the display config if HWC config change was successful
The new config should only be applied if HWC succeeded in changing
the active config. This would otherwise cause failure or undefined
behavior if the client sets an invalid/unsupported display config.
3. Set the active config at display creation time
When a new display device is added update the active config by
querying HWC.
Change-Id: I182f41edbaf9226fc62d6d17ee964998cd9f21f7
sf: Initialize active config for non-virtual displays at boot time
When a non-virtual display device is added at boot time, update the
active config by querying HWC otherwise the default config (config 0)
will be used.
Change-Id: I90f42fa1d20ed6176c4be464a10ae69a2f6a6d55
Change-Id: I182f41edbaf9226fc62d6d17ee964998cd9f21f7
This reverts commit 9b70ab7a3cb260205e81e40ba181a86710d2eb95, reversing
changes made to 153008efb5a00ed3c18d588ce15f90d2442a9786.
Bug: 24302031
Change-Id: Ia746381b30be3b54cb646ed412b7271962c4b02a
Adds the colorTransform field, which defines a vendor-specific color
transform (e.g., wide gamut, sRGB, etc.) to the DisplayInfo class, and
populates it from the HWC interface.
Bug: 20853317
Change-Id: I153edc36a361407656f3eb5082b96c2da2ecbec7
Allows the sideband layer to be passed all the way to HWC instead of
getting blocked by the updated PTS tracking code.
Bug: 22291067
Change-Id: Ic2f20a7528e276fff054e86ca35789c26873b348
Adds code to track whether SurfaceFlinger has sent two frames to HWC in
the same vsync window. This can occur if one frame is delayed so far
it slips into the next window or just if one frame takes an abnormal
amount of time. If this occurs, it shows up as FrameMissed in systrace.
Also adds a property debug.sf.drop_missed_frames which, if set, tells
SurfaceFlinger to skip sending a frame to HWC (i.e., calling
prepare/set) when we detect this condition, which can help prevent
backpressure from the HWC implementation.
Bug: 22513558
Change-Id: I2df0d44cec5fd6edba419388d8c90b5710d1a5b6
