eglCreateSyncKHR requires a call to glFlush which we were not doing.
fixed by moving the code above eglSwapBuffers(), which both
fixes the problem and gives us a slightly better idea of when
the GPU is done drawing.
Change-Id: Ic826ef1fe25a6247742c3d49d0cb69f4031e3593
We now detect at runtime which sync features to use, which
allows us to remove a lot of the compile-time configuration
options. There is still one option though, to disable
KHR_fence_sync on some devices (which are more efficient
without it).
- added a backdoor to get the vendor's EGL strings
the new logic is:
- use always ANDROID_native_fence_sync if available
- fallback to KHR_fence_sync if available and not disabled
by the compile-time option
- use KHR_wait_sync if available and either of the above is
enabled
Change-Id: I9c4b49d9ff1151faf902cc93bd53ea5f205aaabf
- move all the code related to EGL extensions in one place
- add missing extension strings:
EGL_KHR_lock_surface
EGL_KHR_reusable_sync
- add public extensions strings and entry-points
EGL_ANDROID_wait_sync
EGL_ANDROID_presentation_time
- add missing entry-points for EGL_KHR_reusable_sync
Change-Id: Ifd98966b549e8efd8ef5385eba0efde8c4cbc77b
Added EGL extension to set a timestamp on a surface.
Also, fix JNI encoding of "long" in glgen.
Bug 8191230
Change-Id: I38b7334bade3f8ff02bffe600bb74469ef22c164
Since ES3 is backwards compatible with ES2, a new wrapper isn't
necessary, and the Khronos implementation guidelines recommend
supporting both versions with the same library.
Change-Id: If9bb02be60ce01cc5fe25d1f40c4e7f37244ebf6
# By luliuhui
# Via Android Git Automerger (1) and others
* commit '873ab60e94811488caea1906eb98133329a3e28f':
Gfx-3d: fix GetProcAddress in egl extention
This patch can fix issue when Proc address return NULL.
Glbench10, egl-ext and conformance test need this patch to run pass.
Change-Id: I275c7cb6f77cb334c3ee7fa23cd696bba1c5a458
Author: Liuhui Lu <liuhui.lu@intel.com>
Signed-off-by: Shuo Gao <shuo.gao@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
Signed-off-by: Jack Ren <jack.ren@intel.com>
Author-tracking-BZ: 52622
Currently, to activate OpenGL tracing, an application has to be
start with --opengl-trace option (or have a debug prop set).
This CL adds support for tracing an application which may already
be running. This is implemented as follows:
- DDMS initiates a JDWP message to the VM indicating that
opengl traces be enabled.
- When that message is received, a flag is set that indicates
that tracing should be enabled.
- The trace flag is checked during every eglSwap() operation,
and if it finds that tracing should be active and it isn't,
then it starts the tracing component.
Change-Id: I3347fe89fc06c7404d7aa9360f4b21e5bf36ebcb
This change adds support for the EGL_ANDROID_native_fence_sync extension to the
Android EGL layer. It also fixes a couple minor issues with the extension spec.
Change-Id: Ic8829d21f37b701f33aa9c72c3d25e88e03fa3cd
If the EGL implementation supports the EGL_IMG_hibernate_process
extension, use it to hibernate (and hopefully release memory or other
resources) when the process isn't actively using EGL or OpenGL ES. The
idleness heuristic used in this change is:
(a) Wake up when entering any EGL API call, and remain awake for the
duration of the call.
(b) Do not hibernate when any window surface exists; this means the
application is very likely in the foreground.
(c) Do not hibernate while any context is made current to a thread.
The app may be using a client API without the EGL layer knowing,
so it is not safe to hibernate.
(d) Only check these conditions and attempt to hibernate after a
window surface is destroyed or a thread's context is detached. By
not attempting to hibernate at the end of every EGL call, we avoid
some transient wakeups/hibernate cycles when the app is mostly idle,
or is starting to become active but hasn't created its window
surface yet.
On a Galaxy Nexus, hibernating frees 1567 VM pages from the process.
Both hibernating and waking can take anywhere from 30ms to over 100ms
-- measurements have been very inconsistent.
Change-Id: Ib555f5d9d069aefccca06e8173a89625b5f32d7e
This is in preparation for a change that will hibernate the underlying
EGL when idle. Instead of a bare egl_display_t*, get_display() now
returns a egl_display_ptr, which acts like a smart pointer. The
"wakecount" counter managed by the smart pointer isn't used for
anything in this change. It will be used to make sure we don't
hibernate when any thread is in an EGL call, without having to hold a
mutex for the duration of the call.
Change-Id: Iee52f3549a51162efc3800e1195d3f76bba2f2ce
This change adds a debug option to EGL to use an EGLSyncKHR each frame to
determine when the GPU finishes rendering the frame.
Change-Id: I09ce071db904b44f07ca814c586c291c8b59385a
this simplify our EGL wrapper implementation a lot.
This wrapping is no longer needed now that we can only
support a single underlaying EGL implementation.
Change-Id: I8213df7ac69daac447f1fe6e37044b78aac4e9a9
this is possible now that we support only a single
EGL implementation. this allows a large code simplification.
Change-Id: I7a6b9db4c5d60f4407c6061e7a68729af63d5242
from now on, the system can only have one EGL
implementation. this means the software and h/w renderer
cannot be used at the same time on a device. Of course, the
h/w renderer is always prefered; in its absence we
default to the software renderer.
Change-Id: Ib579f58055dd0ce4c4a99144131efa11c16ca3d3
it would happen when a context was made non-current, in this
case we would call the implementation's eglMakeCurrent() which
would succeed, if we're rescheduled at that point, another
eglMakeCurrent() could make that context current to another thread,
however, when we came back to the original call we would
overwrite egl_context_t internal state.
this is fixed by moving the critical section under
egl_display_t's lock.
Change-Id: I743c85696e13263d3a9570824940263df0caacdc
This extension is always added to the GL_EXTENSIONS
extension string for the current GL context, regardless
of if it's supported by the h/w driver.
The extension itself will be handled by GLES_trace (eventually),
when GLES_trace is not enabled, it'll result to a no-op.
If the h/w implementation has this extension, we'll call that version
instead of our dummy version.
Change-Id: Ie5dd3387c4d45cd5ed5f03b73bda6045620a96bc
This patch adds two improvements:
1. Protobuf messages are buffered and sent in chunks.
2. Multiple EGL contexts are handled properly: Corresponding
to each EGLContext, a GLTraceContext with a unique ID is created.
On eglMakeCurrent, the appropriate GLTraceContext is set and is
used while tracing subsequent GL Calls in that thread.
Change-Id: I34076376d3e5af205c87c7396ea47659844abd6e
This patch provides a framework for tracing GLES 1.0 and 2.0
functions. It is missing a lot of features, but here are the
things it accomplishes:
- Stop building the glesv2dbg library, and build the
glestrace library instead.
- Replace the hooks for glesv2dbg with the ones for glestrace.
- Add the basics for the trace library. Currently, this
traces all GL functions, but not all required data is
sent for all the functions. As a result, it will not
be possible to reconstruct the entire GL state on the
host side.
The files gltrace.pb.* and gltrace_api.* are both generated
using the tools/genapi.py script.
Change-Id: Id60a468f7278657f008bc6ea1df01f9bdfecfdd3
This change explicitly sets swap interval 1 on the window when an
EGLSurface is created to render to it.
Change-Id: I91eb29dbee3ae4a55076b921f084d503fbe94e03
- don't advertise extensions that are not supported
by any implementation
- remove EGL_ANDROID_swap_rectangle which is not
implemented by anybody and confuses people
- add some comments about mandatory extensions
Bug: 5428001
Change-Id: Id8dc48116ac1d1eb79ec9ef55d03e29d4257c1f3
the code that validated EGL objects dereferenced the object
to access its EGLDisplay -- needed for validation (!).
This was wrong for two reasons, first we dereferenced the object
before validating it (potentially leading to a crash), secondly
we didn't validate that the object existed in the right EGLDisplay.
We now use the EGLDisplay passed by the user API.
Change-Id: I66f9e851d4f8507892a6b1fee3065f124c4e7138
This change adds the ANDROID suffix to the all the types and functions
defined by the EGL_ANDROID_blob_cache extension.
Change-Id: I087875b96d9a7053efb9c8d5614f9f765eed799d
This change adds a stub cache implementation that gets passed to the
underlying EGL implementation at initialization time.
Change-Id: I14437c5b6f91b7a34a19bb02ad802e6e54f88d2a
This change moves the call to native_window_api_disconnect from
eglDestroySurface to the egl_surface_t destructor. The egl_surface_t
can outlive the external EGLSurface if eglDestroySurface is called while
the surface is made current on a thread.
Change-Id: I0df6117a5633c2a19935fe356579abdd76fc471f
the original connect/disconnect hooks are deprecated
and replace by api_connect/api_disconnect. the original
hooks are no no-ops.
api_connect/api_disconnect is now only called from the
android framework.
Bug: 5057915
Change-Id: I8ca64cd1acd6cabf915bf54689ec2e5f6dfa495a
This change fixes how the Android EGL layer overrides the size and
format of an ANativeWindow in eglCreateWindowSurface. The new behavior
is to leave the size untouched when overriding the format. The previous
behavior was to reset the ANativeWindow to use the default size set by
the ANativeWindow implementation.
It also adds two new 'perform' methods to the ANativeWindow interface:
set_buffers_dimensions and set_buffers_format, and redefines the
behavior of set_buffers_geometry to be the combination of these two new
methods.
Additionally, this change adds an error check for the return value of
the new native_window_set_buffers_format call, which required adding a
(stub) handler for to FramebufferNativeWindow.
Change-Id: I805c7ccd8d4730dfb132d10d8bc3fb058a0b9df1
as specified by the EGL specification, terminated objects's
handles become invalid, the objects themselves are destroyed
when they're not current to some thread.
Change-Id: Id3a4a5736a5bbc3926a9ae8385d43772edb88eeb
