we were not reseting mCurrentTexture in some situations
which in turn caused dequeueBuffers() return a
"FREE" buffer that was also current.
Very often it was harmless, but it created a race with
updateTexImage() which could cause the following
queueBuffers() to fail.
Bug: 5156325
Change-Id: If15a31dc869117543d220d6e5562c57116cbabdb
we now make sure to drain the buffer queue on disconnect.
this happens only when in synchrnous mode. in async mode
we clear all buffers except the head of the queue.
for extra safety we also catch the null pointer
in updateTexImage (which should never happen) and return
an error.
Bug: 5111008
Change-Id: I5174a6ecbb0de641c6510ef56a611cbb4e9e1f59
this simplifies the code a bit and also makes sure
we reevaluate mAbandoned and mConnectedApi each time
we come back from waiting on mDequeueCondition
Change-Id: I1f8538b62ad321b51ed79d953b700036daba796d
- also log a warning when freeAllBuffers is called with a non empty buffer queue
- rename freeAllBuffers to freeAllBuffersLocked
Change-Id: Idb71fdcf233b9ccae62d5a2a7c3c4bad2501d877
the first time a surface was connected, the values returned
by query NATIVE_WINDOW_DEFAULT_{WIDTH|HEIGHT} and
NATIVE_WINDOW_TRANSFORM_HINT were wrong until a call
to queueBuffer was performed.
Bug: 5137366, 5121607
Change-Id: I7ac6b5b0daa876638f6bed7c20f286a6e6d984f6
This change relaxes an error check in SurfaceTexture::setBufferCount to
allow clients to explicitly set a buffer count of 2. The clients that
will do this are camera and video decode. Previously it was thought
that for those clients we would always use async mode, which requires a
minimum of 3 buffers. However, we now believe that for some devices it
may make sense to use synchronous mode (with 2 buffers) to reduce memory
usage.
Bug: 5088418
Change-Id: I620a0ef75075745be9d6c8219e0246aaf33ba950
This change removes support for conditionally using the GL_TEXTURE_2D
target for SurfaceTexture textures with RGB buffers. It also enables
and fixes the RGB-based SurfaceTexture tests.
Change-Id: I9a251a981cf66af6b048b2e4c3fe7231e4774f4d
This change adds the 'abandon' method to the SurfaceTexture C++ class.
This method may be used to put the SurfaceTexture in an abandoned state,
causing all ISurfaceTexture methods to fail.
Change-Id: Ibd261f7b73f44e2bec36a8508bf92113cfb7cf95
This change removes the SurfaceTexture::getAllocator method, as it's no
longer needed. Proper refcounting of the Gralloc buffers is now handled
by the IGraphicBufferAlloc binder marshalling code.
Change-Id: I5cffa6ebfc1bc5828fb7ce0e0a5b2f55cd8479da
This makes ANativeWindow_lock/ANativeWindow_unlockAndPost work
with ANativeWindows implemented by Surface and SurfaceTextureClient.
Also, Surface now inherits directly from SurfaceTextureClient.
Bug: 5003724
Change-Id: I9f285877c7bae9a262e9a7af91c2bae78804b2ef
This change makes the ANativeWindow connect and disconnect calls result
in an IPC to the SurfaceTexture object. This will allow us to prevent
multiple simultaneous connections from different processes.
Change-Id: Id9aa1003b1335b96ca6bd4a1f5a67aa433d42efb
This change moves the point at which queued buffers get consumed to
after any error checks that could cause updateTexImage to fail. This
way, if updateTexImage returns an error the buffer remains queued.
This change alters the conditions under which the onFrameAvailable
callback gets called by the C++ SurfaceTexture class. The new behavior
is to call the callback whenever a frame gets queued that will be
visible to the buffer consumer. This means that buffers queued in
synchronous mode always trigger the callback, as those buffers will
remain pending until they are consumed. Buffers queued in asynchronous
mode will only trigger the callback if there was not previously an
unconsumed buffer pending.
The new behavior means that a consumer should perform a draw operation
exactly once for every onFrameAvailable call that it recieves. This
change also modifies SurfaceFlinger and the SurfaceTexture JNI to
support of the new behavior.
Change-Id: I8b2c6e00961d3d58b11c6af50b555b6e4c5f5b40
This change moves the computation of the transform matrix out of
getTransformMatrix and instead performs the computation when
updateTexImage gets called. This is needed in order for
getTransformMatrix to succeed even if the buffers have been freed (e.g.
by changing the buffer count) because the computation depends upon the
properties of the current GraphicBuffer.
Change-Id: Ied541ab8747b7ad604f862717135f9a16a816be9
Bug: 4490420
This change fixes the MIN_UNDEQUEUED_BUFFERS error check in
dequeueBuffer. The check should only be performed if a buffer has been
queued since the last time the buffer count was changed by the client.
The check must be applied conditionally because video decoders require
all the bufferes to be dequeued and registered before beginning the
decode.
Change-Id: I08d96b380544e395c2fcf0f3983a199bfd695b09
This change fixes up some stale comments, member variable names, log
messages and disables a failing test.
Change-Id: Ic1d3344b18066cf710e4a42838b2417c6b1f2f6c
This change the binder protocol between SurfaceTextureClient
and SurfaceTexture. dequeueBuffer() now takes the requested
parameters for the buffer. SurfaceTexture decides if the
buffer needs to be reallocated and does the allocation
if needed. In that case it returns BUFFER_NEEDS_REALLOCATION
to tell SurfaceTextureClient that it needs to call
requestBuffer (which all parameters have been removed) to
acquire a pointer to the buffer.
dequeueBuffer and requestBuffer could be folded into a single
IPC call, but we chose to optimize the case where buffers are
not created and avoid some complexity in the marshalling code.
Change-Id: I097a7f6f40a3491e10f3f3742eab33999286c304
This leak was intentional, it was there to deal with the fact that
some gralloc implementations don't track buffer handles with
file-descriptors so buffers needed to stay alive until there were
registered, which is not guaranteed by binder transactions.
In this new implementation, we use a small BBinder holding a
reference to the buffer, which with tuck into the parcel. This forces
the reference to stay alive until the parcel is destroyed, which
is guaranteed (by construction) to happen after the buffer is
registered.
this allows the public facing API to not expose the previous hack.
Change-Id: I1dd6cd83679a2b7457ad628169e2851acc027143
SurfaceTexture now has the concept of default size a new method,
setDefaultBufferSize() to set it. When the default size is
changed, dequeueBuffer() will return a value telling the
client that it must ask for a new buffer.
The above only applies if the client has not
overriden the buffer size with setGeometry.
Change-Id: I520dc40363054b7e37fdb67d6a2e7bce70326e81
API addition: The timestamps are represented as nanoseconds from some
arbitrary time point. Like the SurfaceTexture transform matrix, the
timestamp retrieved by getTimestamp is for the last frame sent to the
GL texture using updateTexImage().
Camera HAL change: Expect vendors to set these timestamps using
native_window_set_buffers_timestamp(). For now, they are
autogenerated by SurfaceTextureClient if set_buffers_timestamp() is
never called, but such timing is likely not accurate enough to pass a
CTS test.
bug:3300707
Change-Id: Ife131a0c2a826ac27342e11b8a6c42ff49e1bea7
This change fixes the transform matrix computation in SurfaceTexture
when a crop rectangle is specified by the image producer. It also adds
a test for this case as well as a basic test for the uncropped case.
Bug: 4070775
Change-Id: I1481c9ce9d08fe7f2bff86d3afdeab7d4002b157
