This completes the plumbing from ConsumerListener::onFrameReplaced into
SurfaceFlinger (and other consumers that may care).
Change-Id: I376e78ace95d6748e8662e6b4d47c0dfa697a300
Removes IGraphicBufferConsumer::BufferItem. Depends on the
following changes:
I187b3a7d05196b6289596afac8fb9a9d4aebff76
I0ddd38df37500cfd6b21d1e768ed14e39c5cd9fc
Change-Id: Id1fa56d092188f2cb712768d5d2fc6a9027fb73c
Passes the BufferItem for the queued buffer to the onFrameAvailable
callback so the consumer can track the BufferQueue's contents. Also
adds an onFrameReplaced callback, which is necessary if the consumer
wants to do anything more than simple queue length tracking.
Bug: 18111837
Change-Id: If9d07229c9b586c668e5f99074e9b63b0468feb0
Finally remove the BufferQueue constructor itself. From now on, all
BufferQueues must be created through the createBufferQueue method.
Bug: 13415624
Change-Id: I192bf9430265bab761dcd59db1f02c9d0ac4feed
Increases NUM_BUFFER_SLOTS from 32 to 64 and changes the mask
returned by IGBC::getReleasedBuffers from 32 to 64 bits.
Bug: 13174352
Change-Id: Ie8ef0853916cfb91f83881c7241886bb1950f01a
Adds a new method, IGBP::detachNextBuffer, that effectively does
dequeue + request + detach in a single call, but does not need to
know anything about the dequeued buffer, and will not block on
dequeue. This is mostly for the upcoming StreamSplitter to use in
its onBufferReleased callback.
Change-Id: Ie88a69de109003acebaa486a5b44c8a455726550
It turns out that there's no reason to have both I* and Bn* versions
of the createBufferQueue method, so I removed the Bn* version.
Change-Id: I66aeb09e10458ae540ddf1f38d2d0154ea8f315b
Add a callback to the producer side, onBufferReleased, which will be
called every time the consumer releases a buffer back to the
BufferQueue. This will enable a buffer stream splitter to work
autonomously without having to block on dequeueBuffer.
The binder object used for the callback replaces the generic IBinder
token that was passed into IGraphicBufferProducer::connect to detect
the death of the producer. If a producer does not wish to listen for
buffer release events, it can pass in an instance of the
DummyProducerListener class defined in IProducerListener.h, if it even
cares about death events (BufferQueue doesn't enforce the token being
non-NULL, though perhaps we should).
Change-Id: I23935760673524abeafea2b58dccc3583b368710
This adds a second createBufferQueue method that returns
sp<IGraphicBuffer*> interfaces instead of sp<BnGraphicBuffer*>, since
most clients don't actually need the Binderized versions (but some
might).
Change-Id: Iaf4f719c96ddb6f704afc75cf52be22588173e32
Sideband streams are essentially a device-specific buffer queue that
bypasses the BufferQueue system. They can be used for situations with
hard real-time requirements like high-quality TV and video playback
with A/V sync. A handle to the stream is provided by the source HAL,
and attached to a BufferQueue. The sink HAL can read buffers via the
stream handle rather than acquiring individual buffers from the
BufferQueue.
Change-Id: Ib3f262eddfc520f4bbe3d9b91753ed7dd09d3a9b
Adds detachBuffer and attachBuffer calls to both the producer and
consumer sides of BufferQueue. Buffers may be detached while dequeued
by the producer or acquired by the consumer, and when attached, enter
the dequeued and acquired states, respectively.
Bug: 13173343
Change-Id: Ic152692b0a94d99e0135b9bfa62747dab2a54220
Now that BufferQueue has been split into core + producer + consumer,
rewrite BufferQueue to be a thin layer over a producer and consumer
interface. Eventually, this layer will be deprecated in favor of
only using either the producer or consumer interface, as applicable.
Change-Id: I340ae5f5b633b244fb594615ff52ba50b9e2f7e4
* Basic tests only. Needs more complicated queue/dequeue tests.
* Also needs consumer-side tests to really be thorough.
Change-Id: I1099dd56d65b6e9dfa15377726d6054ce657c0ca
When a BufferQueue producer disconnects and reconnects, we retain
the previously-queued buffers but empty the slots. This allows
the number of queued buffers to grow without limit. The low-memory
killer does not approve.
Bug 11069934
Change-Id: Ia2eaa954c7a3904b54209a3701dba01689e204d8
we add a flag to ANativeWindow::setBufferTransform that means
"apply the inverse rotation of the display this buffer is displayed
onto to".
Bug: 10804238
Change-Id: Id2447676271950463e8dbcef1b95935c5c3f32b2
This change adds an entire field to note whether the timestamp was
auto-generated by Surface or supplied by the application.
The value is used when deciding whether or not to drop frames based
on buffer presentation timestamps. If a desired presentation time
was set explicitly, BufferQueue will use that value to decide if a
frame should be dropped. If the timestamp was generated by Surface
at the time the buffer was queued, the timestamp is ignored.
Bug 10151804
Change-Id: Ibd571a7578351063b813cbdad2ddbeed70655ba5
this means they only have access to the consumer end of
the interface. we had a lot of code that assumed consumers
where holding a BufferQueue (i.e.: both ends), so most of
this change is untangling in fix that
Bug: 9265647
Change-Id: Ic2e2596ee14c7535f51bf26d9a897a0fc036d22c
Disable dropping of frames based on timestamp. Resume auto-
generating timestamps in Surface.
Bug 10151804
Change-Id: I15de26158e1d7ef22a5b150e685a126dc48ae2b4
While currently untested, this should allow to move the
BuffereQueue in the consumer process and have everything
work as usual.
Bug: 9265647
Change-Id: I9ca8f099f7c65b9a27b7e7a3643b46d1b58eacfc
If there are two or more buffers pending that are ready for
immediate presentation, drop all but the last one.
Any code that didn't explicitly specify timestamps for buffers
was using the default value (auto-generated "now"). As a result,
surfaceflinger would drop frames whenever more than one buffer
was queued. We now use zero as the auto-generated timestamp,
and we don't set the timestamp in eglBeginFrame().
Change-Id: I187f42d33de227cd3411ff0dcd3b9ce1961457eb
BufferQueue::dequeueBuffer() could incorrectly return
WOULD_BLOCK while in "cannot block" mode if it happened
while a consumer acquired the last allowed buffer
before releasing the old one (which is a valid thing
to do).
Change-Id: I318e5408871ba85e068ea9ef4dc9b578f1bb1043
we can now queue/dequeue a buffer in asynchrnous mode by using the
async parameter to these calls. async mode is only specified
with those calls (it is not modal anymore).
as a consequence it can only be specified when the buffer count
is not overidden, as error is returned otherwise.
Change-Id: Ic63f4f96f671cb9d65c4cecbcc192615e09a8b6b
we tag queued buffers with the "bufferqueue cannot block" flag
and use that bit to discard a buffer in the queue by new ones
comming in. this allows us to remove the buffer queue drain in
disconnect while maintaining the right behaviour if it gets
connected again (since each buffer remembers how it was enqueued).
Change-Id: I1e703d363a687b70b19ba49cef32213116e8bd3f
this is the first step of a series of improvements to
BufferQueue. A few things happen in this change:
- setSynchronousMode() goes away as well as the SynchronousModeAllowed flag
- BufferQueue now defaults to (what used to be) synchronous mode
- a new "controlled by app" flag is passed when creating consumers and producers
those flags are used to put the BufferQueue in a mode where it
will never block if both flags are set. This is achieved by:
- returning an error from dequeueBuffer() if it would block
- making sure a buffer is always available by replacing
the previous buffer with the new one in queueBuffer()
(note: this is similar to what asynchrnous mode used to be)
Note: in this change EGL's swap-interval 0 is broken; this will be
fixed in another change.
Change-Id: I691f9507d6e2e158287e3039f2a79a4d4434211d
When acquiring a buffer, SurfaceFlinger now computes the expected
presentation time and passes it to the BufferQueue acquireBuffer()
method. If it's not yet time to display the buffer, acquireBuffer()
returns PRESENT_LATER instead of a buffer.
The current implementation of the expected-present-time computation
uses approximations and guesswork.
Bug 7900302
Change-Id: If9345611c5983a11a811935aaf27d6388a5036f1
Now that we are having separate buffer-instances for the buffer-
queue, we can free all buffers; we don't have to keep the head
alive.
Change-Id: I023e9161a2501d99333f8868ce438afa914ec50f
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
Instead of representing the buffer-queue as a vector of buffer
indices, represent them as a vector of BufferItems (copies).
This allows modifying the buffer slots independent of the queued
buffers.
As part of this change, BufferSlot properties that are only
been relevant in the buffer-queue have been removed.
Also, invalid scalingMode in queueBuffer now returns an error.
ConsumerBase has also changed to allow reuse of the same
buffer slots by different buffers.
Change-Id: If2a698fa142b67c69ad41b8eaca6e127eb3ef75b
Signed-off-by: Lajos Molnar <lajos@google.com>
Related-to-bug: 7093648
