Replaced VelocityTracker with a faster and more accurate
native implementation. This avoids the duplicate maintenance
overhead of having two implementations.
The new algorithm requires that the sample duration be at least
10ms in order to contribute to the velocity calculation. This
ensures that the velocity is not severely overestimated when
samples arrive in bursts.
The new algorithm computes the exponentially weighted moving
average using weights based on the relative duration of successive
sample periods.
The new algorithm is also more careful about how it handles
individual pointers going down or up and their effects on the
collected movement traces. The intent is to preserve the last
known velocity of pointers as they go up while also ensuring
that other motion samples do not count twice in that case.
Bug: 4086785
Change-Id: I95054102397c4b6a9076dc6a0fc841b4beec7920
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I7b7ddacc724fb1306e1590dbaebb740d3130d7cd
You can now specify resource configuration variants "wNNNdp"
and "hNNNdp". These are the minimum screen width/height in "dp"
units. This allows you to do things like have your app adjust
its layout based only on the about of horizontal space available.
This introduces a new configuration change flag for screen size.
Note that this configuration change happens each time the orientation
changes. Applications often say they handle the orientation change
to avoid being restarted at a screen rotation, and this will now
cause them to be restarted. To address this, we assume the app can
handle this new config change if its target SDK version is < ICS.
Change-Id: I4acb73d82677b74092c1da9e4046a4951921f9f4
First step of improving app screen size compatibility mode. When
running in compat mode, an application's windows are scaled up on
the screen rather than being small with 1:1 pixels.
Currently we scale the application to fill the entire screen, so
don't use an even pixel scaling. Though this may have some
negative impact on the appearance (it looks okay to me), it has a
big benefit of allowing us to now treat these apps as normal
full-screens apps and do the normal transition animations as you
move in and out and around in them.
This introduces fun stuff in the input system to take care of
modifying pointer coordinates to account for the app window
surface scaling. The input dispatcher is told about the scale
that is being applied to each window and, when there is one,
adjusts pointer events appropriately as they are being sent
to the transport.
Also modified is CompatibilityInfo, which has been greatly
simplified to not be so insane and incomprehendible. It is
now simple -- when constructed it determines if the given app
is compatible with the current screen size and density, and
that is that.
There are new APIs on ActivityManagerService to put applications
that we would traditionally consider compatible with larger screens
in compatibility mode. This is the start of a facility to have
a UI affordance for a user to switch apps in and out of
compatibility.
To test switching of modes, there is a new variation of the "am"
command to do this: am screen-compat [on|off] [package]
This mode switching has the fundamentals of restarting activities
when it is changed, though the state still needs to be persisted
and the overall mode switch cleaned up.
For the few small apps I have tested, things mostly seem to be
working well. I know of one problem with the text selection
handles being drawn at the wrong position because at some point
the window offset is being scaled incorrectly. There are
probably other similar issues around the interaction between
two windows because the different window coordinate spaces are
done in a hacky way instead of being formally integrated into
the window manager layout process.
Change-Id: Ie038e3746b448135117bd860859d74e360938557
a memory corruption happned when the buffer pool was resized
(like when playing a video or using camera) and there was
no current active buffer. In this case, the faulty code
would index into an array at position -1 which corrupted
24 bytes of data.
also improved region validation code (ifdef'ed out by default)
Bug: 4093196
Change-Id: I915c581d131148959d720e00e3892e9186ab733d
Use full string comparisons instead of partial for
file extension and MIME type.
Do case-insensitive comparison of MIME type and file extensions.
Fix error in comment for String8::getPathExtension.
Remove dead code -- StringTokenizer is unused.
Change-Id: I322be6235abbdaab5f7eafa48926dbb2cf46dc29
This change adds a getter method to SurfaceTextureClient to get the
ISurfaceTexture object with which the SurfaceTextureClient is
communicating.
Bug: 4086509
Change-Id: Ifec621e0fe5392a5be56b2348fdc54067cbebcdd
This change adds a query to the ANativeWindow interface for getting the
concrete type of the ANativeWindow.
Bug: 4086509
Change-Id: I64aa86d72fbca3b52a98e1fc35608737781a3178
Associate each motion axis with the source from which it comes.
It is possible for multiple sources of the same device to define
the same axis. This fixes new API that was introduced in MR1.
(Bug: 4066146)
Fixed a bug that might cause a segfault when using a trackball.
Only fade out the mouse pointer when touching the touch screen,
ignore other touch pads.
Changed the plural "sources" to "source" in several places in
the InputReader where we intend to refer to a particular source
rather than to a combination of sources.
Improved the batching code to support batching events from different
sources of the same device in parallel. (Bug: 3391564)
Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
This change adds a new 'method' to the ANativeWindow interface to check
whether buffers queued to the window will be sent directly to the system
window compositor.
Change-Id: I4d4b199e328c110b68b250029aea650f03c8724d
Bug: 3495535
Bug #3461349
This change also fixes two bugs that prevented partial invalidates
from working with other views. Both bugs were in our EGL implementation:
they were preventing the caller from comparing the current context/surface
with another context/surface. This was causing HardwareRenderer to always
redraw the entire screen.
Change-Id: I33e096b304d4a0b7e6c8f92930f71d2ece9bebf5
Ensure that the joystick can always reach -1.0, 0.0 and 1.0 positions
even when noise filtering is applied. (Bug: 3514510)
Add support for a few more standard axes.
Add additional mapping modes for axes.
Some axes are inverted from standard interpretation
or are actually intended to be split into two distict axes
such as left/right trigger controls or accelerator/brake.
Add key layout file for a G25 racing wheel and XBox 360 controller
to tweak behavior. They work fine without them but the axis mappings
are not ideal.
Change-Id: I0fddd90309af4dc14d35f34fe99ed6e521c0b7c7
Added some plumbing to enable the policy to intercept motion
events when the screen is off to handle wakeup if needed.
Added a basic concept of an external device to limit the scope
of the wakeup policy to external devices only. The wakeup policy
for internal devices should be based on explicit rules such as
policy flags in key layout files.
Moved isTouchEvent to native.
Ensure the dispatcher sends the right event type to userActivity
for non-touch pointer events like HOVER_MOVE and SCROLL.
Bug: 3193114
Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
Fades out the mouse pointer:
- after 15 seconds of inactivity normally
- after 3 seconds of inactivity in lights out mode
- after a non-modifier key down
- after a touch down
Extended the native Looper to support enqueuing time delayed
messages. This is used by the PointerController to control
pointer fade timing.
Change-Id: I87792fea7dbe2d9376c78cf354fe3189a484d9da
This change adds a new query to ANativeWindow for getting the minimum
number of buffers that must be left un-dequeued during the steady-state
operation of the ANativeWindow.
Change-Id: Ie8c461fc26b02ecde02ddb4f95bf763662cf1551
Related-Bug: 3356050
There are two areas that have changed to eliminate the assumption that
local jobject references are both canonical and persistent:
1. JavaBBinderHolder no longer holds onto and reuses it parent object
reference per se. Since the underlying JavaBBinder object holds a
real global ref, this was redundant anyway. Now, for purposes of its
transient need to perform JNI operations, it simply uses the current
jobject ref(s) passed during method invocation, and no longer attempts
to hold these refs beyond the scope of a single invocation.
2. Binder obituaries no longer assume that a jobject reference to a
recipient will always compare == as a 32-bit value with any future
reference to the same object. The implementation now asks Dalvik
whether object references match.
This amended patch fixes the earlier bug around races between
remote binder death cleanup and local explicit unregistration of
VM-side death recipients.
Bug 2090115
Change-Id: I70bd788a80ea953632b1f466f385ab6b78ef2913
some of the conversion operators were not using the proper
pointer type when calling incStrong/decStrong, usually it
has no bad consequences, but for some implementation
of the ref-counted object it could lead to recording the wrong
owner id.
Change-Id: If574b9069b8a4cf6e0911a992c8f095aba799995
this was introduced recently. we make sure to use
the correct owner id (the sp) instead of the wp.
Change-Id: I78fdc6ec0c2d3e687278b70442d74d1924b512a2
There are two areas that have changed to eliminate the assumption that
local jobject references are both canonical and persistent:
1. JavaBBinderHolder no longer holds onto and reuses it parent object
reference per se. Since the underlying JavaBBinder object holds a
real global ref, this was redundant anyway. Now, for purposes of its
transient need to perform JNI operations, it simply uses the current
jobject ref(s) passed during method invocation, and no longer attempts
to hold these refs beyond the scope of a single invocation.
2. Binder obituaries no longer assume that a jobject reference to a
recipient will always compare == as a 32-bit value with any future
reference to the same object. The implementation now asks Dalvik
whether object references match.
Bug 2090115
Change-Id: If62edd554d0a9fbb2d2977b0cbf8ad7cc8e2e68d
First slipt sp<> out of RefBase into StrongPointer.h so it can be reused
more easily and to make it clear that it doesn't require RefBase.
Note: the rest of the change only affects the system when DEBUG_REFS is enabled.
The main problem we fix here is that the owner id associated with each
reference could get out of date when a sp<> or wp<> was moved, for
instance when they're used in a Vector< >.
We fix this issue by calling into RefBase::moveReferences from
a template specialization for sp<TYPE> and wp<TYPE> of the
type helpers. RefBase::moveReferences() has then a chance to
update the owner ids.
There is a little bit of trickery to implement this generically in
RefBase, where we need to use a templatized functor that can turn
a sp<TYPE>* casted to a void* into a RefBase*.
Introduced a new debug option DEBUG_REFS_FATAL_SANITY_CHECKS
currently set to 0 by default as there seem to be an issue
with sp<ANativeWindow> which trips the sanity checks.
Change-Id: I4825b21c8ec47d4a0ef35d760760ae0c9cdfbd7f
Added API on InputDevice to query the set of axes available.
Added API on KeyEvent and MotionEvent to convert keycodes and axes
to symbolic name strings for diagnostic purposes.
Added API on KeyEvent to query if a given key code is a gamepad button.
Added a new "axis" element to key layout files to specify the
mapping between raw absolute axis values and motion axis ids.
Expanded the axis bitfield to 64bits to allow for future growth.
Modified the Makefile for keyboard prebuilts to run the keymap
validation tool during the build.
Added layouts for two game controllers.
Added default actions for game pad button keys.
Added more tests.
Fixed a bunch of bugs.
Change-Id: I73f9166c3b3c5bcf4970845b58088ad467525525
This change makes it possible to extend the set of axes that
are reported in MotionEvents by defining new axis constants.
The MotionEvent object is now backed by its C++ counterpart
to avoid having to maintain multiple representations of the
same data.
Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
weak pointer comparison operators were implemented wrong,
they were using the internal "unsafe" pointer. We could end up
with two "equal" weak pointer pointing to different objects.
this caused KeyedVector keyed by weak pointer to work incorrectly, in
turn causing a window that just got added to a list to be immediately
removed.
Change-Id: Ib191010c39aafa9229109e4211f6c3b2b2f9696d
This change passes a reference to the IGraphicBufferAlloc binder object
to SurfaceTextureClient objects. When STC objects are created they
query their associated ISurfaceTexture object for the
IGraphicBufferAlloc that the SurfaceTexture uses to allocate buffers.
Having the SurfaceTextureClient hold this reference prevents the
GraphicBufferAlloc in SurfaceFlinger from freeing the allocated buffers
before the SurfaceTextureClient is done with them.
Change-Id: Ib8e30e8b37fdd60438cbb4cb7e9174d0ba6d661c
related-bug: 3362519
