This adds EGL wrapper functions for the following EGL extensions:
EGL_EXT_buffer_age
EGL_KHR_partial_update
EGL_KHR_swap_buffers_with_damage
Change-Id: I407acda1e0310f7f01a5efe9c915721a941138a4
- Wire up new dataSpace parameter through buffer queue stack
- Update tests to include the parameter
- Switch eglApi to using dataSpace to indicate sRGB gamma/linear
difference
- Remove RAW_SENSOR in favor of RAW16
- Remove use of sRGB format enums
- Add default dataspace to buffer queue core
- Add query for default dataspace
Cherry pick of I070bd2e7c56506055c419004c29e2e3feac725df
Change-Id: I461952389c18051176c6b75e664f20ad369f5760
Some time before kitkat, a workaround was put in place to keep tuna
working with obsolete PowerVR GPU drivers. The tuna product was dropped
in AOSP for kitkat, but the workaround remained.
There are still a number of devices shipping with OMAP4 processors, and
this workaround continues to be applied on those products even when it
is not required. The effect is that virtual display CTS will fail on
those devices.
The previous message indicated that the fault was due to an already-
connected window, which was misleading at times.
Bug 12439318
Change-Id: I1e0a042673dd245d1b0d237af963c52946803eb6
This change makes GLConsumer use the EGL_ANDROID_image_crop extension when
available on a device. The crop rectangle is passed to the EGL driver when
creating EGLImages, allowing the crop to be performed by the driver rather than
using the texture transform matrix.
Bug: 10897141
Change-Id: I63e9a5d5c85067376abc420e3639154468346311
EGL now picks the buffer format out of a small set
of formats compatible with CPU consumers instead of
using the EGL_NATIVE_VISUAL_ID.
Bug: 10194508
Change-Id: If423cd29601b7a3ace8670f4c73004132cfc4b31
If the implementation eglCreateContext failed, we called
eglGetError(), so we could check that it set the EGL error properly.
But since we'd already called this, when the app called eglGetError()
it would get EGL_SUCCESS!
Bug: 10181333
Change-Id: Ic45d3a8fcb8c4421e04844c6d2f52761790b5948
We've had the extended behavior since Android 4.3, but the extension
hadn't been ratified by Khronos yet so we couldn't add it to the
extension string.
Bug: 9681677
Change-Id: I78842316a3ab7a3f66a0ac1a4742d837de664c4c
If there are two or more buffers pending that are ready for
immediate presentation, drop all but the last one.
Any code that didn't explicitly specify timestamps for buffers
was using the default value (auto-generated "now"). As a result,
surfaceflinger would drop frames whenever more than one buffer
was queued. We now use zero as the auto-generated timestamp,
and we don't set the timestamp in eglBeginFrame().
Change-Id: I187f42d33de227cd3411ff0dcd3b9ce1961457eb
The EGL 1.4 spec section 3.5.1 states that EGL_BAD_ALLOC should be set
if the supplied window already has an associated EGLSurface, not
EGL_BAD_NATIVE_WINDOW as is currently set.
Change-Id: If1598617f4e31904f2045560ae1cdf49d8a697dc
This allows apps to find OpenGL ES 3.0 functions using
eglGetProcAddress() instead of dlopen/dlsym.
Bug: 9681677
Change-Id: I7ce6e1636bc47d6b0bf20a4e46bd67235714d129
in the common case this saves one instructions per jump
(which will help with the i-cache).
this change also gets rid of the "use slow tls" option,
which was useless. So at least now architectures that don't have
assembly bindings will perform much better.
Change-Id: I31be6c06ad2136b50ef3a1ac14682d7812ad40d2
destroyed but current-to-a-thread resources are only destroyed
when they're made not-current; however, we were not destroying
those when the thread itself terminated, causing these resources
to be leaked forever.
we now install a tls-key destructor that takes care of this
by calling eglReleaseThread upon thread termination.
Bug: 9209776
Change-Id: I88298a34e3a27488eb81eab76717715569c7d57c
eglCreateSyncKHR requires a call to glFlush which we were not doing.
fixed by moving the code above eglSwapBuffers(), which both
fixes the problem and gives us a slightly better idea of when
the GPU is done drawing.
Change-Id: Ic826ef1fe25a6247742c3d49d0cb69f4031e3593
We now detect at runtime which sync features to use, which
allows us to remove a lot of the compile-time configuration
options. There is still one option though, to disable
KHR_fence_sync on some devices (which are more efficient
without it).
- added a backdoor to get the vendor's EGL strings
the new logic is:
- use always ANDROID_native_fence_sync if available
- fallback to KHR_fence_sync if available and not disabled
by the compile-time option
- use KHR_wait_sync if available and either of the above is
enabled
Change-Id: I9c4b49d9ff1151faf902cc93bd53ea5f205aaabf
- move all the code related to EGL extensions in one place
- add missing extension strings:
EGL_KHR_lock_surface
EGL_KHR_reusable_sync
- add public extensions strings and entry-points
EGL_ANDROID_wait_sync
EGL_ANDROID_presentation_time
- add missing entry-points for EGL_KHR_reusable_sync
Change-Id: Ifd98966b549e8efd8ef5385eba0efde8c4cbc77b
Added EGL extension to set a timestamp on a surface.
Also, fix JNI encoding of "long" in glgen.
Bug 8191230
Change-Id: I38b7334bade3f8ff02bffe600bb74469ef22c164
Since ES3 is backwards compatible with ES2, a new wrapper isn't
necessary, and the Khronos implementation guidelines recommend
supporting both versions with the same library.
Change-Id: If9bb02be60ce01cc5fe25d1f40c4e7f37244ebf6
# By luliuhui
# Via Android Git Automerger (1) and others
* commit '873ab60e94811488caea1906eb98133329a3e28f':
Gfx-3d: fix GetProcAddress in egl extention
This patch can fix issue when Proc address return NULL.
Glbench10, egl-ext and conformance test need this patch to run pass.
Change-Id: I275c7cb6f77cb334c3ee7fa23cd696bba1c5a458
Author: Liuhui Lu <liuhui.lu@intel.com>
Signed-off-by: Shuo Gao <shuo.gao@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
Signed-off-by: Jack Ren <jack.ren@intel.com>
Author-tracking-BZ: 52622
Currently, to activate OpenGL tracing, an application has to be
start with --opengl-trace option (or have a debug prop set).
This CL adds support for tracing an application which may already
be running. This is implemented as follows:
- DDMS initiates a JDWP message to the VM indicating that
opengl traces be enabled.
- When that message is received, a flag is set that indicates
that tracing should be enabled.
- The trace flag is checked during every eglSwap() operation,
and if it finds that tracing should be active and it isn't,
then it starts the tracing component.
Change-Id: I3347fe89fc06c7404d7aa9360f4b21e5bf36ebcb
