Sideband streams are essentially a device-specific buffer queue that
bypasses the BufferQueue system. They can be used for situations with
hard real-time requirements like high-quality TV and video playback
with A/V sync. A handle to the stream is provided by the source HAL,
and attached to a BufferQueue. The sink HAL can read buffers via the
stream handle rather than acquiring individual buffers from the
BufferQueue.
Change-Id: Ib3f262eddfc520f4bbe3d9b91753ed7dd09d3a9b
We were already making sure the HWComposer class had the handle before
prepare, but it wasn't passing the handle along to HWC as intended.
Partial fix for bug: 11430248
Change-Id: I25f672c4fdfaa6a81fe0acb24d9ad05153ee17dc
This change adds the DispSync class, which models the hardware vsync event
times to allow vsync event callbacks to be done at an arbitrary phase offset
from the hardware vsync. This can be used to reduce the minimum latency from
Choreographer wake-up to on-screen image presentation.
Bug: 10624956
Change-Id: I8c7a54ceacaa4d709726ed97b0dcae4093a7bdcf
When there are no window layers for a display, SurfaceFlinger clears
the undefined region using GLES. Some of the places that check for
GLES composition weren't considering this special case, in particular:
- We were skipping the eglSwapBuffers() on these frames.
- We were putting VirtualDisplaySurface in HWC-only composition mode.
This change centralizes the logic for this special case.
Bug: 10957068
Change-Id: I2deaf2ed101e8ea76708862a6bb67751b6078794
The previous implementation assumed that the HWC could read and write
the same buffer on frames that involved both GLES and HWC composition.
It turns out some hardware can't do this. The new implementation
maintains a scratch buffer pool to use on these mixed frames, but on
GLES-only or HWC-only frames still does composition directly into the
output buffer.
Bug: 8384764
Change-Id: I7a3addb34fad9bfcbdabbb8b635083e10223df69
When a buffer had a crop (meaning its content is scaled to the window size)
and a window crop was defined, the resulting crop couldn't be expressed
properly because h/w composer's API was limited to integers, since
this is fixed in h/w composer 1.3, we take adventage of this to
make sure we get the correct crop.
this bug could result in the buffer being scaled by an incorrect ratio and
be slightly offset; moreover, it would produce different results from the
GL code path, which is always correct.
Change-Id: I8e20e00b6e26177d14f4ab4d2cd581e26c818892
- timeout is now 3 seconds instead of 1
- simplifies the API a bit
- allows us to change/tweak this timeout globaly
Bug: 8988871
Change-Id: I8d3c6ec43a372f602fb3f29856710339f86c0ec9
HWComposer queries the HWC for dimensions of physical displays, but
can't do that for virtual displays. The dimensions are used to set the
display frame of the framebuffer target layer passed to HWC, and
implicitly the dimensions of the virtual display.
Bug: 8316155
Change-Id: I9cbd2530d2fa878f86128a1472def520b5d694a5
DisplayDevices can be released when DisplayManager removes them from
the display list, or (for virtual displays) when the surface is set to
NULL. We were only cleaning up HWC resources associated with the
display in the first case.
Bug: 8384764
Change-Id: Id3d226dd7178fbe6d0a2ac4e2660b864ee073de3
HWComposer didn't allow the virtual display output buffer to be set
directly, instead it always used the framebuffer target buffer.
DisplayDevice was only providing the framebuffer release fence to
DisplaySurfaces after a commit.
This change fixes both of these, so both HWComposer and DisplayDevice
should continue to work if VirtualDisplaySurface changes to use
separate framebuffer and output buffers. It's also more correct since
VirtualDisplaySurface uses the correct release fence when queueing the
buffer to the sink.
Bug: 8384764
Change-Id: I95c71e8d4f67705e23f122259ec8dd5dbce70dcf
BufferQueueInterposer allows a client to tap into a
IGraphicBufferProducer-based buffer queue, and modify buffers as they
pass from producer to consumer. VirtualDisplaySurface uses this to
layer HWC composition on top of GLES composition before passing the
buffer to the virtual display consumer.
Bug: 8384764
Change-Id: I61ae54f3d90de6a35f4f02bb5e64e7cc88e1cb83
DisplayDevice now has a DisplaySurface instead of using
FramebufferSurface directly. FramebufferSurface implements
DisplaySurface, and so does the new VirtualDisplaySurface class.
DisplayDevice now always has a surface, not just for virtual displays.
In this change VirtualDisplaySurface is just a stub; buffers still go
directly from GLES to the final consumer.
Bug: 8384764
Change-Id: I57cb668edbc6c37bfebda90b9222d435bf589f37
None of these should change behavior, except for removing some
incorrect log messages when using a virtual display.
- HWComposer::getAndResetReleaseFenceFd() checks the HWC version, so
no need to do that in the DisplayDevice::onSwapBuffersCompleted().
However, it should check that mFramebufferSurface is not NULL like
it is for virtual displays.
- Comment that FramebufferSurface::dump() overrides the non-virtual
ConsumerBase::dump(), and fix it so the right thing happens
regardless of the static type of the pointer/reference the callee
has. FramebufferSurface::dump() could be removed right now, but I'd
need to bring it back in a later change.
- Use the right enum for validating display type ids.
- Don't try to send hotplug events for virtual displays.
- Mark virtual displays as connected so HWComposer::prepare() doesn't
think something is wrong when it gets a non-NULL layer list.
- Remove unused FramebufferSurface methods.
Bug: 8384764
Change-Id: Id28a2f9be86b45f4bb7915fdf7752157035f4294
The functionality of LayerBase and Layer is folded
into Layer. There wasn't a need for this abstraction
anymore.
Change-Id: I66511c08cc3d89009ba4deabf47e26cd4cfeaefb
This change eliminates the uses of a NULL sp<Fence> indicating that no waiting
is required. Instead we use a non-NULL but invalid Fence object for which the
wait methods will return immediately.
Bug: 7892871
Change-Id: I5360aebe3090422ef6920d56c99fc4eedc642e48
