some of these failures are not fatal and even expected in some cases
so they should not emit a dump in the log in those cases.
Change-Id: Idcfa252e3bfa9d74e27fe4ad8f8623aa01aa9c5e
Use Vendor ID, Product ID and optionally the Version to
locate keymaps and configuration files for external devices.
Moved virtual key definition parsing to native code so that
EventHub can identify touch screens with virtual keys and load
the appropriate key layout file.
Cleaned up a lot of old code in EventHub.
Fixed a regression in ViewRoot's fallback event handling.
Fixed a minor bug in FileMap that caused it to try to munmap
or close invalid handled when released if the attempt to map
the file failed.
Added a couple of new String8 conveniences for formatting strings.
Modified Tokenizer to fall back to open+read when mmap fails since
we can't mmap sysfs files as needed to open the virtual key
definition files in /sys/board_properties/.
Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
The ShortcutManager used to only receive the key code of the key event
that triggered the shortcut. This change now provides the shortcut
manager with the whole key event so it can look up the associated
character using the correct key character map.
To make this more efficient, added a mechanism for recycling
key events. At the moment it is only used by key events owned by the
system process, since clients of the existing API (such as Views)
might continue to hold on to key events after dispatch has finished so
they would break if the key event were recycled by the framework.
Deprecated KeyCharacterMap.BUILT_IN_KEYBOARD.
Change-Id: I4313725dd63f2be01c350c005a41c7fde9bc67e8
Fixed a bug with dpad keys on external keyboards being rotated
according to the display orientation by adding a new input device
configuration property called "keyboard.orientationAware".
Added a mechanism for overriding the key layout and key character
map in the input device configuration file using the new
"keyboard.layout" and "keyboard.characterMap" properties.
Also added "trackball.orientationAware", "touch.orientationAware" and
"touch.deviceType" configuration properties.
Rewrote the configuration property reading code in native code
so that it can be used by EventHub and other components.
Added basic support for installable idc, kl, and kcm files
in /data/system/devices. However, there is no provision for
copying files there yet.
Disabled long-press character pickers on full keyboards so that
key repeating works as expected.
Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
Also added a validation tool for keymaps (not currently integrated
into the build system but getting there).
This change brings back Android.mk with the intent that it will
be used to validate keymaps in a later change.
Added some missing keys that are present on phones.
Bug: 3215210
Bug: 3225421
Change-Id: Id817c6e2215164616942c51a42752915d9ceacd3
Allow the overlay object to be destroyed whenever the destroy is
invoked. Currently the destroy call returns if there is an error
encountered, which results in open data and control channels.
Change-Id: I1f2ef4ebb5fb1dcabf05ab50b5bbf6e5e240a63a
BREAKING CHANGE: Redesigned the key character map format to
accomodate full keyboards with more comprehensive suite of modifiers.
Old key character maps will not work anymore and must be updated.
The new format is plain text only and it not compiled to a binary
file (so the "kcm" tool will be removed in a subsequent check-in).
Added FULL keyboard type to support full PC-style keyboards.
Added SPECIAL_FUNCTION keyboard type to support special function
keypads that do not have any printable keys suitable for typing
and only have keys like HOME and POWER
Added a special VIRTUAL_KEYBOARD device id convention that maps
to a virtual keyboard with a fixed known layout. This is designed
to work around issues injecting input events on devices whose
built-in keyboard does not have a useful key character map (ie.
when the built-in keyboard is a special function keyboard only.)
Modified several places where events were being synthesized
to use the virtual keyboard.
Removed support for the "qwerty" default layout.
The new default layout is "Generic". For the most part "qwerty"
was being used as a backstop in case the built-in keyboard did
not have a key character map (probably because it was a special
function keypad) and the framework needed to be able to inject
key events anyways. The latter issue is resolved by using the
special VIRTUAL_KEYBOARD device instead of BUILT_IN_KEYBOARD.
Added the concept of a key modifier behavior so that
MetaKeyKeyListener can distinguish between keyboards that use
chorded vs. toggled modifiers.
Wrote more robust key layout and key character map parsers
to enable support for new keyboard features and user installable
key maps.
Fixed a bug in InputReader generating key ups when keys
are released out of sequence.
Updated tons of documentation.
Currently QwertyKeyListener is being used for full keyboards
with autotext and capitalization disabled. This mostly works
but causes some problems with character pickers, etc.
These issues will be resolved in subsequent changes.
Change-Id: Ica48f6097a551141c215bc0d2c6f7b3fb634d354
This change fixes a bug in the dispatcher where the window manager
policy would incorrectly receive a key repeat count of 0 in the case
where the key repeat was generated by the hardware or driver.
Long-press on HOME was broken as a result.
Repeating keys could also get stuck down.
Bug: 3159581
Bug: 3208156
Change-Id: I1145487cfcc41a7850dba4cafc63c4a5951ace5b
New default only applies to applications with targetSdkVersion >=
HONEYCOMB. Old applications default to no touch splitting for
their windows.
In addition, enabled split touch for various system windows.
Bug: 3049580
Change-Id: Idc8da9baa2cd8e1e4e76af8967d7b6a5ccb94427
Refactored ViewRoot, NativeActivity and related classes to tell the
dispatcher whether an input event was actually handled by the application.
This will be used to move more of the global default key processing
into the system server instead of the application.
Change-Id: If06b98b6f45c543e5ac5b1eae2b3baf9371fba28
This change defines a macro NUM_FRAME_BUFFERS to set
the desired number of framebuffers to be used by the UI,
instead of hard-coding 2 framebuffers.
Aditional logic has been added to handle the initialization
and destruction of NUM_FRAME_BUFFERS buffers.
Change-Id: I3a4bfec3e0f453432f2ffebf084c00f574d3be46
Signed-off-by: Rodrigo Obregon <robregon@ti.com>
This change fixes a bug in the dispatcher where the window manager
policy would incorrectly receive a key repeat count of 0 in the case
where the key repeat was generated by the hardware or driver.
Long-press on HOME was broken as a result.
Bug: 3159581
Change-Id: If0f02662313f5b879a4e566fbb461389e274a550
This optimization is currently disabled until Launcher is
modified to take advantage of it. The optimization can be
enabled by turning on RENDER_LAYERS_AS_REGIONS in the
OpenGLRenderer.h file.
Change-Id: I2fdf59d0f4dc690a3d7f712173ab8db3848b27b1
Two issues:
1. First, due to an inverted conditional in the input dispatcher, we were
reporting touches as long touches and vice-versa to the power manager.
2. Power manager user activity cheek event suppression also suppresses touch
events (but not long touch or up events). As a result, if cheek event
suppression was enabled, touches would not poke the user activity timer.
However due to the above logic inversion, this actually affected long
touches. Net result, if cheek suppression was enabled in the power manager
and you held your thumb on the screen long enough, the phone would
go to sleep!
Cheek event suppression is commonly turned on when making a phone call.
Interestingly, it does not seem to get turned off afterward...
This change fixes the logic inversion and exempts touches from the cheek
suppression. The reason we do the latter is because the old behavior
was actually harmful in other ways too: a touch down would be suppressed
but not a long touch or the touch up. This would cause bizarre behavior
if you touched the screen while it was dimmed. Instead of brightening
immediately, it would brighten either when you lifted your finger or
300ms later, whichever came first.
Bug: 3154895
Change-Id: Ied9ccec6718fbe86506322ff47a4e3eb58f81834
Rewrote interceptKeyBeforeQueueing to make the handling more systematic.
Behavior should be identical except:
- We never pass keys to applications when the screen is off and the keyguard
is not showing (the proximity sensor turned off the screen).
Previously we passed all non-wake keys through in this case which
caused a bug on Crespo where the screen would come back on if a soft key
was held at the time of power off because the resulting key up event
would sneak in just before the keyguard was shown. It would then be
passed through to the dispatcher which would poke user activity and
wake up the screen.
- We propagate the key flags when broadcasting media keys which
ensures that recipients can tell when the key is canceled.
- We ignore endcall or power if canceled (shouldn't happen anyways).
Changed the input dispatcher to not poke user activity for canceled
events since they are synthetic and should not wake the device.
Changed the lock screen so that it does not poke the wake lock when the
grab handle is released. This fixes a bug where the screen would come
back on immediately if the power went off while the user was holding
one of the grab handles because the sliding tab would receive an up
event after screen turned off and release the grab handles.
Fixed a couple of issues where media keys were being handled inconsistently
or not at all, particularly in the case of the new PAUSE, PLAY
and RECORD keys.
Bug: 3144874
Change-Id: Ie630f5fb6f128cfdf94845f9428067045f42892c
This patch makes the dispatcher drop all of its state when it is
disabled (when the screen turns off). This ensures that the dispatcher
does not get stuck thinking a pointer is still down if the screen
turned off while the user was touching the display (such as a fat touch
while hitting the power button).
Bug: 3098344
Change-Id: If50ef5804870aa1acd3179fd4b40e3cda58dd39d
Fixed a bug where we would lose the first touch point when swiping out of
the virtual key area.
Fixed a bug where we would not send an ACTION_MOVE event in cases where
individual pointers went down/up and the remaining pointers actually moved.
This is important since many applications do not handle pointer movements
during ACTION_POINTER_DOWN or ACTION_POINTER_UP. In the case of
ACTION_POINTER_UP the movement was completely lost since all pointers were
dispatched using their old location rather than the new location.
Improved motion event validation to check for duplicate pointer ids.
Added an input source constant that was missing from the NDK api but
defined in the framework api.
Added a timestamp when reporting added/removed devices in EventHub.
Bug: 3070082
Change-Id: I3206a030f43b7616e2f48006e5a9d522c4d92e56
Compute the actual number of indices in the GAMEPAD_KEYCODES instead of
the pure size in bytes.
Bug: 3121536
Change-Id: I71edbd8bf6eff2c8cc0ea5c6845362b3d1e06466
Merge commit 'f2c406030874b355ca9e4e67cc0e3aff6103c23e'
* commit 'f2c406030874b355ca9e4e67cc0e3aff6103c23e':
Fix bug where home presses were not poking user activity.
Useful for tweaking touch screen alignment without having to modify the
kernel device driver x/y axis bounds.
Change-Id: I6ca43d3c138548f9dfb76aa33150a0c853698fb6
We now poke user activity twice: once upon dequeueing an event
for dispatch and then again just before we dispatch it. The second
poke is to compensate for the fact that it can take a few seconds to
identify the dispatch target (if the application is responding slowly)
but we want to keep the display from going to sleep for X amount of time
after the app gets a chance to actually receive the event. This mirrors
pre-Gingerbread behavior.
Removed some unnecessary code that filters user activity pokes when sending
events to KeyGuard. We don't need this because KeyGuard already tells the
power manager to disable user activity.
Bug: 3101397
Change-Id: I8c3a77601fdef8f584e84cfdd11aa79da0ff51db
Merge commit '9e0e054388689fd618c84a283c28ee484477b44d'
* commit '9e0e054388689fd618c84a283c28ee484477b44d':
Fix a native crash in input dispatcher when windows are removed.
Manual merge from Gingerbread.
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: Id876736fd8bf332ff9a5428bde59f5268aa49c3a
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: I8f8398f4fdeb0469e5d71124c21bedf121bd8c07
Added new key maps for external keyboards. These maps are intended to
be shared across devices by inheriting the "keyboards.mk" product
makefile as part of the device's product definition.
One of the trickier changes here was to unwind some code in
MetaKeyKeyListener that assumed that only the low 8 bits of the meta key
state were actually used. The new code abandons bitshifts in favor
of simple conditionals that are probably easier to read anyways.
The special meta key state constants used by MetaKeyKeyListener
are now (@hide) defined in KeyEvent now so as to make it clearer that they
share the same code space even if those codes are not valid for KeyEvents.
The EventHub now takes care of detecting the appropriate key layout
map and key character map when the device is added and sets system
properties accordingly. This avoids having duplicate code in
KeyCharacterMap to probe for the appropriate key character map
although the current probing mechanism has been preserved for legacy
reasons just in case.
Added support for tracking caps lock, num lock and scroll lock and
turning their corresponding LEDs on and off as needed.
The key character map format will need to be updated to correctly support
PC style external keyboard semantics related to modifier keys.
That will come in a later change so caps lock doesn't actually do
anything right now except turn the shiny LEDs on and off...
Added a list of symbolic key names to KeyEvent and improved the toString()
output for debug diagnosis. Having this list in a central place in the
framework also allows us to remove it from Monkey so there is one less
thing to maintain when we add new keycodes.
Bug: 2912307
Change-Id: If8c25e8d50a7c29bbf5d663c94284f5f86de5da4
