i) Call removeFd() only if the fd in the BitTube has been
previously added to the Looper. Use a flag to determine whether the fd
has been previously added or not.
ii) Increment mPendingFlushEventsToSend after holding a connectionLock.
iii) Store the number of acks that are pending in SensorEventQueue
and send them all at once.
Bug: 17472228
Change-Id: I1ec834fea1112a9cfbd9cddd2198438793698502
This is used by media service to schedule video frames at the
proper time, based on precise vsync timings.
Bug: 14659809
Change-Id: I1a90603f3dc09dca9aa4f90a3aa845fab56e0a5e
i) Significant Motion multiple clients fix. Make a copy of
mActiveConnections vector before cleaning up SensorEventConnections
when one-shot sensors trigger.
ii) Maintain a mapping between flush_complete_events and
SensorEventConnections to accurately map flush() API calls and
corresponding flush_complete_events
iii) Remove all references to 1_1 and 1_2 HALs.
iv) Dynamically allocate sensor_event buffers in SensorService main
threadLoop.
Bug: 17412359
Change-Id: If3c3986197660cafef2d2e0b4dc7582e229cf1c4
+ This is needed so that activity manager does not
have to do cpu side rotations when capturing recents
thumbnails.
Change-Id: If998008e675ad01305db8399fd643cf4608b7025
But provide a temporary escape hatch for AudioFlinger.
This oneway option will be removed as soon as possible.
Bug: 16408906
Change-Id: I20d6da1969ae05b96e72795463470eb4c1f8fbdc
Bug: 17379740
This function was missing a return statement, even though it declares a return
type. This is undefined behavior, which clang miscompiled into just falling
through to a later function in some cases. Adding the return statement
fixes the undefined behavior (and probably fixes a bug too).
Change-Id: I05c03b6473b831769dc4fa8b5ba43fb4249f7626
i) Fix a possible race condition when adding a pending flush connection
to mActiveSensors data structure.
ii) Invalidate flush_complete_events as soon as they are consumed by a
connection so that they are not used by other connections which are
registered for the same sensor.
Change-Id: I1491bea8c2081c4aab1feacc60add13b7aa26bb7
After fixing b/16874785.
This reverts commit f010a05c7e.
Original comment, which actually describes the effect of this:
Change the mExtras field in Binder.h to be a stdatomic.h atomic
value, and replace references to it with proper stdatomic.h calls.
This removes one of a small number of remaining 64 bit
android_atomic references. It also replaces the erroneously
non-atomic read accesses to mExtras.
It would be better if this used the C++11 <atomic> facility,
but we don't quite have that yet.
Fixes
Bug:16513433
Change-Id: I1645ca5d6f60595bf5d388913665ce4b8780b26d
(cherry picked from commit 3effababf2)
Keys which are necessary for supporting world-wide broadcast
standard or used commonly for TV/STB remotes.
Change-Id: I2721ceb7d956c87f1d4106b99f9d21947ae13d47
If a display is terminated and then initialized, we can't detect
this using the display itself (it has the same value), but all
EglImages still become invalid for the display. This patch detects
this during image binding and forces creation of a new EglImage.
Bug: 10430249
Change-Id: I75101c50962f21263dca3ec6e241a2e5a3c23dad
1) Flush should only be received by the app calling flush(). Maintain
a queue of all flush() calls and send flush_complete events in that
order.
2) Log warnings for older HALs. Remove batch() calls with DRY_RUN flag.
3) Reallocate event cache when more sensors register and the desired
maxCacheSize increases. Clear NEEDS_ACK flag in the buffer whenever
there is a write() failure.
4) More dump information. Add wake-up flag, maxDelay and timestamps for
sensor events.
Bug: 16874778
Change-Id: I195646191059fd31f75f2f07886c0f98bf9b509a
Add new fields to OMX_AUDIO_PARAM_AACPROFILETYPE for
- SBR configuration
- decoder max number of channels
- decoder DRC parameters
Bug 16740915
Change-Id: Ib01822bc402fe9064c6c1c68b72c570cf72b7ecb
If available, surfaceflinger will use the hwc setCursorPositionAsync()
api to change the position of supported cursor layers outside of
the usual prepare/set loop.
Change-Id: Ib3fc5c0c390b3489ddbba202379840a1d2748917
i) Send ack for wake_up sensors on the socket connection instead of using Binder RPC.
ii) Cache events per connection in case there are write failures. Compute cache size
from FIFO counts of sensors.
iii) Send FlushCompleteEvent only for apps that explicitly called flush().
Change-Id: I018969736b7794b1b930529586f2294a03ee8667
BufferQueueProducer::allocateBuffers used to keep the BufferQueueCore
mutex while doing the buffer allocation, which would cause the consumer
(which also needs the mutex) to block if the allocation takes a long
time.
Instead, release the mutex while doing the allocation, and grab it again
before filling the slots. Keep a bool state and a condvar to prevent
other producers from trying to allocate the slots while the mutex is
released.
Bug: 11792166
Change-Id: I4ab1319995ef892be2beba892f1fdbf50ce0416d
(cherry picked from commit ea96044470)
In most cases, EGLImages can be created one-to-one with graphic
buffers in slots, but that was difficult due to some special
cases:
- ReleaseTexImage binds a custom 'unslotted' debug image.
- When all slots are freed, we still need to hang on to one.
These cases were handled by keeping an additional reference to
the 'current' buffer (mCurrentTextureBuf), but we would create
new images since we can't reference count them in the same way.
This patch uses the same semantics, except that it reference
counts the image (an EglImage wrapper class) rather than just
buffer. The wrapper class also detects the cases when we need
a new EGLImage, and only creates them in those rare cases.
Change-Id: I2915761dbe49d2a9bda1f59e60f857543634636b
Bug: 15116722
- Adds a sticky transform field that can be set from a
SurfaceFlinger client Surface. This transform is
added to any transform applied to the Surface.
Change-Id: Idaa4311dfd027b2d2b8ea5e2c6cba2da5779d753
Adds a constructor that doesn't require a GLES texture name and sets
up the GLConsumer in detached mode.
Bug: 15616428
Change-Id: Idc9ea2e59baa24bbd959da9fffe0fb71c0aa9818
Removes the dependency on default constructor parameters for
GLConsumer so that a different constructor prototype can safely be
added.
Change-Id: I0da924bbd4c141edbf305598c1be8bc575654680
This adds an allocateBuffers method to BufferQueue, which instructs
it to allocate up to the maximum number of buffers allowed by the
current configuration. The goal is that this method can be called
ahead of render time, which will prevent dequeueBuffers from blocking
in allocation and inducing jank.
This interface is also plumbed up to the native Surface (and, in
another change, up to the Java Surface and ThreadedRenderer).
Bug: 11792166
Change-Id: I4aa96b4351ea1c95ed5db228ca3ef98303229c74
