This feature is currently controled by a system property.
"ro.sf.hwrotation" can be set to either 90 or 270. It'll cause
SF to rotate the screen by 90 and 270 degres respectively.
That is, if the driver reports 800x480 for instance, and
ro.sf.hwrotation is set to 90, applications will "see" a
480x800 display and will run in portrait.
This is implemented by introducing an extra "display"
transformation in the GraphicPlane.
We now always first try to use the EGLImageKHR directly before
making a copy with copybit. The copy may be needed when
EGLImage doesn't support the requested format, which is
currently the case with YUV.
At some point the implementation became complicated because of
SurfaceFlinger's special needs, since we are now relying on gralloc
we can go back to much simpler MemoryDealer.
Removed HeapInterface and AllocatorInterface, since those don't need
to be paramterized anymore. Merged SimpleMemory and Allocation.
Made SimplisticAllocator non virtual.
Removed MemoryDealer flags (READ_ONLY, PAGE_ALIGNED)
Removed a lot of unneeded code.
Added getRenderPosition() API to IAudioFlinger to retreive number of audio frames
written by AudioFlinger to audio HAL and by DSP to DAC.
Added getRenderPosition() API to AudioHardwareInterface to retreive number of audio frames
written by DSP to DAC.
Exposed AudioTrack::getPosition() to AudioSink() to make it available to media player.
Removed excessive log in AudioHardwareGeneric.
Merge commit '425324e97bba75cd69bb6c81de6248529540e6fe'
* commit '425324e97bba75cd69bb6c81de6248529540e6fe':
Fix failure to open AVRCP input device due to EPERM.
Modified AudioService.getActiveStreamType() so that STREAM_VOICE_CALL is selected when a track using this stream
type is playing.
Chanded isMusicActive() for a more generic isStreamActive(stream) method in AudioSystem, IAudioFlinger and AudioFlinger.
Sleep for 100us and try to open the input device again if it fails, with a
maximum of 10 attempts.
We need the retry logic because setting permissions on a new input device is
racy. The init process watches for new input device (via uevent) and sets the
permission on them in devices.c:make_device(). However at the same time
EventHub.cpp watches for new input devices from the system_server process, and
immediately tries to open them. I can't see a simple way to avoid this race
condition.
As best as I can tell this race condition has always exisited.
There must have been some timing change that happened recently that causes us
to hit this race condition much more often. See repro notes in referenced bug.
Bug: 2375632
make sure to fallback properly to software when copybit operation fails.
with this change, the preview image will at least be displayed in b&w
(since GL doesn't support the yuv format). This would also fix
2363506, but that one is now handled more cleanly.
First implementations of audio policy manager in Eclair branch have shown that most code is common to all platforms.
Creating AudioPolicyManagerBase base class will improve code maintainability and readability.
Audio policy manager code for platforms using generic audio previously in AudioPolicyManagerGeneric is replaced by AudioPolicyManagerBase.
Audio policy manager test code previously in AudioPolicyManagerGeneric is moved to AudioPolicyManagerBase.
Also added a wake lock for delayed commands in AudioPolicyService.
Modified AudioFlinger duplicating output thread so that audio tracks are not mixed until both outputs (A2DP and hardware) have exited standby mode. This avoids to have one output far ahead of the other and audio frames dropped because the compensation mechanism cannot keep up.
Also calculate the maximum wait time in OutputTrack::write() based the on smallest frame count of all output threads instead of the frame count of the thread the OutputTrack is connected to. This avoids starving the thread with the smallest frame count by waiting too long on the other thread.
Since the frame count was reduced on hardware output to reduce latency the difference between A2DP and hardware outputs frame counts had become problematic.
Also increased the number of overflow buffers to cope with bigger timing differences among outputs.
Merge commit 'f9b0e826689cca5ecbd40aa49f3ea7f7c73ad2a2' into eclair-mr2
* commit 'f9b0e826689cca5ecbd40aa49f3ea7f7c73ad2a2':
fix [2269582] [TOP-10][Passion_1506][APT:Camera]Sometimes camera preview screen is truncated after launching and back to home screen by home key repeatedly
When a surface is removed from the screen while it holds a "freeze lock", the
release of that lock happens in the destructor as a "safety net". However, it
doesn't trigger an update at that point.
Make sure that "freeze locks" are released from the transaction at the point
a surface is removed from the screen (if it's not on screen, it shouldn't
prevent the screen to redraw, and therefore cannot hold a freeze lock).
The refresh corresponding to that transaction will pick it up as soon as possible.
Merge commit '083a557c25e0032bc4900f335b6643d0badd09ce' into eclair-mr2
* commit '083a557c25e0032bc4900f335b6643d0badd09ce':
fix [2319255] crash in openGL : from the media recorder stress test.
Merge commit '76169da0e84b0fcf621aeac6141af3ee85bc7c1e' into eclair-mr2
* commit '76169da0e84b0fcf621aeac6141af3ee85bc7c1e':
fix [2315900] Monochrome camera preview screen after launching camera
Merge commit 'd8c752ef74bc6d8b412defe35caf1a19be15eb8b' into eclair-mr2
* commit 'd8c752ef74bc6d8b412defe35caf1a19be15eb8b':
improve video performance to minimize the tearing effect seen in 720p movies
Allows "aapt dump --values resource" to print out whether a string in a
ResStringPool is in UTF-8 or UTF-16 encoding.
Change-Id: I6478884a70a3b46fee862dece6cb33454fc34843
this was introduced by a recent change. when we try to figure out the size of
the yuv->rgb temporary buffer, the output resolution has not been computed yet
and an invalid buffer size is used. most of the time the allocation fails
and the system reverts to "standard" GL will uses onle the Y plane.
the allocation of the temporary buffer is moved to onDraw(), the first
time it is called, by that time, the window is positioned properly.
always rescale videos to their target size using copybit during yuv->rgb
conversion. this improves performance of the GPU pass and doesn't require
linear filtering to be enabled. Also always use 16-bits buffers.
the average processing time for 720p dropped from ~50ms to ~30ms
This is a very simply implementation: upon receiving an IPC, if the handling
thread is at a background priority (the driver will have taken care of
propagating this from the calling thread), then stick it in to the background
scheduling group. Plus an API to turn this off for the process, which is
used by the system process.
This also pulls some of the code for managing scheduling classes out of
the Process JNI wrappers and in to some convenience methods in thread.h.
Allows the use of UTF-8 for packing resources instead of the
default of UTF-16 for Java. When strings are extracted from the
ResStringPool, they are converted to UTF-16 and the result is
cached for subsequent calls.
When using aapt to package, add in the "-8" switch to pack the
resources using UTF-8. This will result in the value, key, and
type strings as well as the compiled XML string values taking
significantly less space in the final application package in
most scenarios.
Change-Id: I129483f8b3d3b1c5869dced05cb525e494a6c83a
The ToneGenerator failed to initialize because no more tracks were available in AudioFlinger mixer.
All tracks were used because the duplicating output was failing to free the tracks on audio hardware output mixer when exiting due to a misplaced test on output activity: output tracks where only freed if the duplicating output was active when exiting.
The fix consists in freeing the output tracks when the duplicating thread is destroyed without condition.
Merge commit '6d42d80653f2c41f3e72a878a1d9a6f9693b89f7' into eclair-mr2
* commit '6d42d80653f2c41f3e72a878a1d9a6f9693b89f7':
Fix issue 2304669: VoiceIME: starting and canceling voice IME yields persistent "error 8" state on future attempts and breaks voice search.
Fixed AudioFlinger::openInput() broken in change ddb78e7753be03937ad57ce7c3c842c52bdad65e
so that an invalid IO handle (0) is returned in case of failure.
Applied the same correction to openOutput().
Modified RecordThread start procedure so that a failure occuring during the first read from audio input stream is detected and causes
the record start to fail.
Modified RecordThread stop procedure to make sure that audio input stream fd is closed before we exit the stop function.
Fixed AudioRecord JAVA and JNI implementation to take status of native AudioRecord::start() into account
and not change mRecordingState to RECORDSTATE_RECORDING if start fails.
Merge commit '0019215fc395ef12c191049b1903eeabf70859cf' into eclair-mr2
* commit '0019215fc395ef12c191049b1903eeabf70859cf':
Revert "When using MDP, we needed to use a texture for diming."
Merge commit '121a31ac3901fcb81c808da2b4a9a7cf66c12b7c' into eclair-mr2
* commit '121a31ac3901fcb81c808da2b4a9a7cf66c12b7c':
fix [2291418] Camera preview cannot work in Emulator
The image buffer used by glTexImage2d() would be uninitialized when no copybit engine
can be found.
We now always initialize images, since the abscence of copybit is not necessarily fatal.
Merge commit '1ac56b602aa6a1ac54c608e5a8b76f44638db23b' into eclair-mr2
* commit '1ac56b602aa6a1ac54c608e5a8b76f44638db23b':
Fix issue 2292062: Audio freezes for three seconds when choosing ringtones with a headset connected and music playing.
There was bug in the logic that calculated the relative timeout, the start time was
reset each time an event was received, which caused the timeout to never occur if
an application was constantly redrawing.
Now we always check for a timeout when we come back from the waitEvent() and
process the "anti-freeze" if needed, regardless of whether an event was received.
The problem comes from a deadlock with AudioPolicyService mutex: When the second ringtone starts,
this mutex is locked by AudioPolicyService::startOutput() which in turn calls setParameters() to change the output device.
Audioflinger::ThreadBase::setParameters() signals the parameter change to the AudioFlinger mixer thread and waits for a condition
indicating that the parameter change has been processed.
At the same time, the mixer thread detects that the audio track corresponding to the first ring tone has been killed and calls its destructor.
This calls AudioPolicyService::releaseOutput() which tries to lock the AudioPolicyService mutex.
If this happens before the mixer thread can process the setParameters() command we are deadlocked.
The deadlock ends because setParameters() uses a timeout when waiting for the condition.
This regression was introduced by change 33736 fixing issue 2265163.
The fix consists in calling AudioPolicyService::releaseOutput() from Track::destroy() instead of from Track destructor: as detroy() is never called from the mixer thread loop (as opposed to the destructor) the deadlock described above cannot occur.
Binary XML file line #37: Error inflating class <unknown> after adding a secondary account
Now that I have these debug logs, I want to keep them since they will make
debugging these kinds of issues a lot easier in the future. (Note in this
case there was no problem in the framework.)
Change-Id: If2b0bbeda4706b7c5dc1ba4a5db04b74f40e1543
This is a second attempt to fix the audio routed to earpiece syndrom.
The root cause identified this time is the crash of an application having an active AudioTrack playing on the VOICE_CALL stream type.
When this happens, the AudioTrack destructor is not called and the audio policy manager is not notified of the track stop.
Results a situation where the VOICE_CALL stream is considered as always in use by audio policy manager which makes that audio is routed to earpiece.
The fix consists in moving the track start/stop/close notification to audio policiy manager from AudioTrack to AudioFlinger Track objet.
The net result is that in the case of a client application crash, the AudioFlinger TrackHandle object (which implements the remote side of the IAudioTrack binder interface) destructor is called which in turn destroys the Track object and we can notify the audio policy manager of the track stop and removal.
The same modification is made for AudioRecord although no bug related to record has been reported yet.
Also fixed a potential problem if record stop is called while the record thread is exiting.
since we're using the GPU for composition, don't use a texture for dimming,
instead simply use an alpha-blended quad.
also workaround what looks like a GL driver bug by calling glFinish() before
glReadPixels().
2206097: Broken suggestions while composing message
2166583: Color artifacts with MDP dithering
2261119: Passion transition animations are rough
2216759: Screen flicker when dropdown list in background window shows or hides
This is part of enabling GPU composition instead of using the MDP. This change
is dependent on another change in the vendor project.
Specifically this change disables the use of EGLImageKHR for s/w buffers
for cache coherency reasons. memcpy is used instead.
Surface::validate() could sometimes dereference a null pointer before checking it wasn't null.
This will prevent the application to crash when given bad parameters or used incorrectly.
However, the bug above probably has another cause.
in the kernel requires a guard page, so 1M allocations fragment memory very
badly. Subtracting a couple of pages so that they fit in a power of
two allows the kernel to make more efficient use of its virtual address space.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
This builds on the EGLImage solution. We simply use copybit to convert from the
YUV frame into an EGLImage created for that purpose and proceed with the
regular EGLImage code.
We need to do this because "regular" GL doesn't support YUV textures.
We could improve upon this by detecting exacly what the GL supports and bypass
this extra step if not required, but we'll do this later if needed.
This change goes with a kernel driver change that reduces the audio buffer size from 4800 bytes (~27ms) to 3072 bytes (~17ms).
- The AudioFlinger modifcations in change 0bca68cfff161abbc992fec82dc7c88079dd1a36 have been removed: the short sleep period was counter productive when the AudioTrack is using the call back thread as it causes to many preemptions.
- AudioFlinger mixer thread now detects long standby exit time and in this case anticipates start by writing 0s as soon as a track is enabled even if not ready for mixing.
- AudioTrack::start() is modified to start call back thread before starting the IAudioTrack so that thread startup time is masked by IAudioTrack start and mixer thread wakeup time.
To prevent buggy command implementations from poisoning binder threads'
scheduling class & priority for future command execution, we now reset the
cgroup and thread priority to foreground/normal when a binder service thread
finishes executing the designated command.
Change-Id: Ibc0ab2485751453f6dc96fdb4eb877fd02796e3f
we lost the concept of vertical stride when moving video playback to EGLImage.
Here we bring it back in a somewhat hacky-way that will work only for the
softgl/mdp backend.
Reduce sleep time in AudioFlinger mixer thread when no data has been written to output to speed up startup time when exiting standby.
The rest of the modifications for this issues is in kernel driver:
commit 0dbb0ee136ed8de757df1ae26d84556c1751deae for buffer size modification from 8192 to 4800 bytes.
Another kernel improvement that is not submitted yes will reduce delay when audio output is exiting standby.
add a way to convert a mapped "pushbuffer" buffer to a gralloc handle
which then can be safely used by surfaceflinger, without including
gralloc_priv.h
Temporarily make a function public that doesn't need to be. When
host gcc-4.0.3 is gone from the build servers we can undo this.
(Cherry-picked from eclair-mr2.)
Use EGLImageKHR instead of copybit directly.
We now have the basis to use streaming YUV textures (well, in fact
we already are). When/if we use the GPU instead of the MDP we'll
need to make sure it supports the appropriate YUV format.
Also make sure we compile if EGL_ANDROID_image_native_buffer is not supported
Instead of using glTex{Sub}Image2D() to refresh the textures, we're using an EGLImageKHR object
backed up by a gralloc buffer. The data is updated using memcpy(). This is faster than
glTex{Sub}Image2D() because the texture is not swizzled. It also uses less memory because
EGLImageKHW is not limited to power-of-two dimensions.
Added setVoiceVolume() method to AudioSystem, AudioFlinger, IAudioFlinger, AudioPolicyService.
Removed call to AudioHardwareInterface::setVoiceVolume() from AudioFlinger::setStreamVolume().
Added a workarouond to request the A2DP output standby directly to audio hardware when the sink is suspended as it seems that the suspend request often fails.
Also take into account resume requests received while a suspend request is pending.
when running out of memory, a null handle is returned but the error code may not be set.
In that case we need to return NO_MEMORY instead of NO_ERROR, so that the calling code
won't try to dereference the null pointer.
When switching rapidily orientation back and forth, surfaces end-up
acquiring the freeze-lock when the first orientation change happens,
but never release it because by the time the 2nd orientation change
comes in, the surface size is back to its original size and
doesn't appear to have resized.
we now always release the freeze-lock when we receive a buffer of the
expected size.
This also fixes [2152536] ANR in browser
When SF is enqueuing buffers faster than SF dequeues them.
The update flag in SF is not counted and under some situations SF will only
dequeue the first buffer. The state at this point is not technically
corrupted, it's valid, but just delayed by one buffer.
In the case of the Browser ANR, because the last enqueued buffer was delayed
the resizing of the current buffer couldn't happen.
The system would always fall back onto its feet if anything -else- in
tried to draw, because the "late" buffer would be picked up then.
A window is created and the browser is about to render into it the
very first time, at that point it does an IPC to SF to request a new
buffer. Meanwhile, the window manager removes that window from the
list and the shared memory block it uses is marked as invalid.
However, at that point, another window is created and is given the
same index (that just go freed), but a different identity and resets
the "invalid" bit in the shared block. When we go back to the buffer
allocation code, we're stuck because the surface we're allocating for
is gone and we don't detect it's invalid because the invalid bit has
been reset.
It is not sufficient to check for the invalid bit, I should
also check that identities match.
This change is a complement to the main fix in kernel driver for the same issue (partner change #1250).
It removes clicks sometimes heard after the end of the tones while audio flinger is sending 0s to the audio output stream.
The problem was that the sleep time between two writes was more than the duration of one audio output stream buffer which could cause some underrun.
Also fixed a recent regression in ToneGenerator that made that the end of previous tone was repeated at the beginning of current one under certain timing circumstances when the maximum tone duration was specified.
When EGLImage extension is not available, SurfaceFlinger will fallback to using
glTexImage2D and glTexSubImage2D instead, which requires 50% more memory and an
extra copy. However this code path has never been exercised and had some bugs
which this patch fix.
Mainly the scale factor wasn't computed right when falling back on glDrawElements.
We also fallback to this mode of operation if a buffer doesn't have the adequate
usage bits for EGLImage usage.
This changes only code that is currently not executed. Some refactoring was needed to
keep the change clean. This doesn't change anything functionaly.
The ANR is caused by SurfaceFlinger waiting for buffers of a removed surface to become availlable.
When it is removed from the current list, a Surface is marked as NO_INIT, which causes SF to return
immediately in the above case. For some reason, the surface here wasn't marked as NO_INIT.
This change makes the code more robust by always (irregadless or errors) setting the NO_INIT status
in all code paths where a surface is removed from the list.
Additionaly added more information in the logs, should this happen again.
The core logging in BackupManagerService and in the Google backup transport are
still enabled at this point.
Change-Id: I10abfa565bbd1097dd3631051b6aca163e4af33a
Wait for the parameter set completed condition with a time out in ThreadBase::setParameters().
Also lock AudioFlinger mutex before accessing thread list in AudioFlinger::setParameters() and keep a strong reference
on the thread being used in case it is exited while processing the request.
* changes:
fix [2152247] Windows sometimes drawn scaled up.
invalidate the surface when the physical changes
introduce the notion of the requested size in the Layer state
remove unused code
We were emitting GL commands, calling composition complete and releasing clients
without ever calling eglSwapBuffers(), which is completely wrong on non-direct
renders. This could cause transient drawing artifacts when unfreezing the
screen (upon orientaion change for instance) and could also block the clients
for ever as they are waiting for their previous buffer to be rendered.
Turning off backup in the Settings UI constitutes an opt-out of the whole
mechanism. For privacy reasons we instruct the backend to wipe all of the data
belonging to this device when the user does this. If the attempt fails it is
rescheduled in the future based on the transport's requestBackupTime()
suggestion. If network connectivity changes prompt the transport to indicate a
backup pass is appropriate "now," any pending init operation is processed before
the backup schedule is resumed.
The broadcasts used internally to the backup manager are now fully protected;
third party apps can neither send nor receive them.
(Also a minor logging change; don't log 'appropriate' EOF encountered during
parsing of a backup data stream.)
There was a regression introduced in AudioFlinger by change 24114 for suspended output:
The suspended output was not reading and mixing audio tracks.
When the phone is ringing, the A2DP output is suspended if the SCO headset and A2DP headset are the same. As the ringtone is played over the duplicated output, the fact that the A2DP output was not reading data was causing the hardware output to be stalled from time to time.
This appears to fix the sim-eng build on the gDapper build machines.
Basic problem is that LayerBuffer::OverlaySource has a constructor that
calls SurfaceFlinger.signalEvent(). SurfaceFlinger lists LayerBuffer
as a friend, but that's not enough to convince gcc that the embedded
OverlaySource class is also a friend. I don't see a way to make them
friendly, so I marked signalEvent() as public.
a new method, compostionComplete() is added to the framebuffer hal, it is used by surfaceflinger to signal the driver that the composition is complete, BEFORE it releases its client. This gives a chance to the driver to
The fix consists in locking AudioFlinger::mLock mutex in the TrackBase destructor before clearing the strong pointer to the shared memory client. The mutex is not locked in removeclient() any more which implies that we must make sure that the Client destructor is always called from the TrackBase destructor or that we hold the mLock mutex before calling deleting the Client.
Take 2. We needed to check that the usage flags are "good enough" as opposed to "the same".
This reverts commit 8f17a762fe9e9f31e4e86cb60ff2bfb6b10fdee6.
The problem comes from the fact that when the duplicated output is closed after BT headset disconnection, the OUTPUT_CLOSED notification is not sent to AudioSystem. Then the mapping between notification stream and duplicated output cached in AudioSystem is not cleared and next time a notification is played, the duplicated output is selected and the createTrack() request is refused by AudioFlinger as the selected output doesn't exist.
The notification is ignored by AudioFlinger because when it is sent by the terminating playback thread, the thread has already been removed from the playback thread list.
The fix consists in sending the notification in closeOutput() and not when exiting the playback thread.
The same fix is applied to record threads.
This is due to a regression introduced by change 24114: when no audio tracks are ready for mixing, 0s are written to audio hardware. However this should only happen if tracks have already been mixed since the audio flinger thread woke up.
Also do not write 0s to audio hardware in direct output threads when audio format is not linear PCM.
Appears to have been broken by:
commit 9779b221e999583ff89e0dfc40e56398737adbb3
Author: Mathias Agopian <mathias@google.com>
Date: Mon Sep 7 16:32:45 2009 -0700
fix [2068105] implement queueBuffer/lockBuffer/dequeueBuffer properly
For some reason we don't like to have "-lpthread" globally -- it's a no-op
on device builds, but required for many host tools and all sim binaries --
so adding the use of pthread calls requires adding the library explicitly.
AudioFlinger: verify that mCblk is not null before using it in Track and RecordTrack contructors.
IAudioFlinger: check result of remote transaction before reading IAudioTrack and IAudioRecord.
IAudioTrack and IAudioRecord: check result of remote transaction before reading IMemory.
we could have several thread waiting on the condition and they all need to wake-up.
also added a debug "mTid" field in the class, which contains the tid of the thread (as opposed to pthread_t), this
is useful when debugging under gdb for instance.
we ended-up locking a Mutex that had been destroyed.
This happened because we gave an sp<Source> to the outside world,
and were called after LayerBuffer had been destroyed.
Instead we now give a wp<LayerBuffer> to the outside and have it
do the destruction.
Add a parameter to ToneGenerator.startTone() allowing the caller to specify the tone duration. This is used by the phone application to have a precise control on the DTMF tone duration which was not possible with the use of delayed messaged.
Also modified AudioFlinger output threads so that 0s are written to the audio output stream when no more tracks are ready to mix instead of just sleeping. This avoids an issue where the end of a previous DTMF tone could stay in audio hardware buffers and be played just before the beginning of the next DTMF tone.
Rewrote SurfaceFlinger's buffer management from the ground-up.
The design now support an arbitrary number of buffers per surface, however the current implementation is limited to four. Currently only 2 buffers are used in practice.
The main new feature is to be able to dequeue all buffers at once (very important when there are only two).
A client can dequeue all buffers until there are none available, it can lock all buffers except the last one that is used for composition. The client will block then, until a new buffer is enqueued.
The current implementation requires that buffers are locked in the same order they are dequeued and enqueued in the same order they are locked. Only one buffer can be locked at a time.
eg. Allowed sequence: DQ, DQ, LOCK, Q, LOCK, Q
eg. Forbidden sequence: DQ, DQ, LOCK, LOCK, Q, Q
Do not ramp volume if the first frame of a track is processed after the track was stopped.
In the case of very short sounds, the track stop request can be received by AudioFlinger just after the start request before the first frame is mixed by AudioMixer. In this case, the track is already in stopped state and initial volume is applied with a ramp for the first frame processed which should not be the case: initial volume change is always applied immediatelly.
This addresses a few parts of the bug:
- There was a small issue in the window manager where we could show a window
too early before the transition animation starts, which was introduced
by the recent wallpaper work. This was the cause of the flicker when
starting the dialer for the first time.
- There was a much larger problem that has existing forever where moving
an application token to the front or back was not synchronized with the
application animation transaction. This was the cause of the flicker
when hanging up (now that the in-call screen moves to the back instead
of closing and we always have a wallpaper visible). The approach to
solving this is to have the window manager go ahead and move the app
tokens (it must in order to keep in sync with the activity manager), but
to delay the actual window movement: perform the movement to front when
the animation starts, and to back when it ends. Actually, when the
animation ends, we just go and completely rebuild the window list to
ensure it is correct, because there can be ways people can add windows
while in this intermediate state where they could end up at the wrong
place once we do the delayed movement to the front or back. And it is
simply reasuring to know that every time we finish a full app transition,
we re-evaluate the world and put everything in its proper place.
Also included in this change are a few little tweaks to the input system,
to perform better logging, and completely ignore input devices that do not
have any of our input classes. There is also a little cleanup of evaluating
configuration changes to not do more work than needed when an input
devices appears or disappears, and to only log a config change message when
the config is truly changing.
Change-Id: Ifb2db77f8867435121722a6abeb946ec7c3ea9d3
In practice, no one ever writes an apostrophe in an aapt string with the
intent of using it to quote whitespace -- they always mean to include a
literal apostrophe in the string and then are surprised when they find
the apostrophe missing. Make this an error so that it is discovered
right away instead of waiting until late in QA or after the strings have
already been sent for translation. (And fix a recently-introduced string
that has exactly this problem.)
Silence the warning about an empty span in a string, since this seems to
annoy people instead of finding any real problems.
Make the error about having a translated string with no base string into
a warning, since this is a big pain when making changes to an application
that has already had some translations done, and the dead translations
should be removed by a later translation import anyway.
In AudioFlinger::MixerThread::putTracks(), change the mFillingUpStatus flag to FS_FILLING for active tracks so that mute request is executed without ramping volume down when the track is moved from A2DP to hardware output.
Also modified AudioFlinger::setStreamOutput() so that the notification of the change is sent only once to AudioSystem.
(in this case the state is dumped without the proper locks held which could result to a crash)
in addition, the last transaction and swap times are printed to the dump as well as the time spent
*currently* in these function. For instance, if SF is unresponsive because eglSwapBuffers() is stuck,
this will show up here.
what happened is that the efective pixel format is calculated by SF but Surface nevew had access to it directly.
in particular this caused query(FORMAT) to return the requested format instead of the effective format.
this would happen is the window is made visible but the client didn't render yet into it. This happens often with SurfaceView.
Instead of filling the window with solid black, SF would simply ignore it which could lead to more disturbing artifacts.
in theory the window manager should not display a window before it has been drawn into, but it does happen occasionnaly.
Apparently the problem is caused by the fact that A2dpAudioStreamOut::standby() calls a2dp_stop() after the headset has been powered down.
The workaround consists in indicating to A2DP audio hardware that a close request is pending and that stanby() must be bypassed.
This change makes SurfaceHolder.setType(GPU) obsolete (it's now ignored).
Added an API to android_native_window_t to allow extending the functionality without ever breaking binary compatibility. This is used to implement the new set_usage() API. This API needs to be called by software renderers because the default is to use usage flags suitable for h/w.
This is because the AudioFlinger duplicating thread is closed while the output tracks are still active. This cause the output tracks objects to be destroyed at a time where they can be in use by the destination output mixer.
The fix consists in adding the OutputTrack to the track list (mTracks) of its destination thread so that a strong reference is help during the mixer processed and the track is detroyed only when safe by destination thread.
Also added detection of problems when creating the output track (e.g. no more tracks in mixer). In this case the output track is not added to output track list of duplicating thread.
When changing the audio output stream sampling rate with setParameters() make sure that all tracks have a sampling rate less or equal to 2 times the new output sampling rate.
Merge change 7419 from master that may help eliminate the problem.
This change was for a different use case (when disabling A2DP to switch output to SCO) but without a repro case it is worth trying.
The BT headset detection now makes the difference between car kits and headsets, which can be used by audio policy manager.
The headset connection is also detected earlier, that is when the headset is connected and not when the SCO socket is connected as it was the case before. This allows the audio policy manager to suspend A2DP output while ringing if a SCO headset is connected.
There was no garanty that the corresponding thread destructor had been already called when exiting the closeOutput() or closeInput() functions.
This contructor could be called by the thread after the exit condition is signalled. By way of consequence, closeOutputStream() could be called after
we exited closeOutput() function.
To solve the problem, the call to closeOutputStream() or closeInputStream() is moved to closeOutput() or closeInput().
The function checkForNewParameters_l() is called with the ThreadBase mutex mLock locked. In the case where the parameter change implies
an audio parameter modification (e.g. sampling rate) the function sendConfigEvent() is called which tries to lock mLock creating a deadlock.
The fix consists in creating a function equivalent to sendConfigEvent() that must be called with mLock locked and does not lock mLock.
Also added the possibility to have more than one set parameter request pending.
Use integers instead of void* as input/output handles at IAudioFlinger and IAudioPolicyService interfaces.
AudioFlinger maintains an always increasing count of opened inputs or outputs as unique ID.
* changes:
update most gl tests to use EGLUtils
added two EGL helpers for selecting a config matching a certain pixelformat or native window type
added NATIVE_WINDOW_FORMAT attribute to android_native_window_t
The major things going on here:
- The MotionEvent API is now extended to included "pointer ID" information, for
applications to keep track of individual fingers as they move up and down.
PointerLocation has been updated to take advantage of this.
- The input system now has logic to generate MotionEvents with the new ID
information, synthesizing an identifier as new points are down and trying to
keep pointer ids consistent across events by looking at the distance between
the last and next set of pointers.
- We now support the new multitouch driver protocol, and will use that instead
of the old one if it is available. We do NOT use any finger id information
coming from the driver, but always synthesize pointer ids in user space.
(This is simply because we don't yet have a driver reporting this information
from which to base an implementation on.)
- Increase maximum number of fingers to 10. This code has only been used
with a driver that reports up to 2, so no idea how more will actually work.
- Oh and the input system can now detect and report physical DPAD devices.
If the output stream handler passed was not the A2DP output stream, the request was ignored instead of being forwarded downstream to hardware interface.
there was several issues:
- when a surface was made non-current, the last frame wasn't shown and the buffer could stay locked
- when a surface was made current the 2nd time, it would not dequeue a new buffer
now, queue/dequeue are done when the surface is made current.
for this to work, a new query() hook had to be added on android_native_window_t, it allows to retrieve some attributes of a window (currently only width and height).
The current gralloc allocates buffer memory for render targets that will typically have NPOT dimensions. Assuming that the vendor driver supports converting the resulting NPOT android_native_buffer_t to a NPOT EGLImage, SurfaceFlinger calls glEGLImageTargetTexture2DOES(), and uses glGetError() to test whether the GL can support creating an EGL target texture with the specified NPOT EGLImage. If it is supported, the DIRECT_TEXTURE flag remains set, otherwise it is cleared.
Tangentially, if the driver advertises the GL_ARB_texture_non_power_of_two extension, the NPOT_EXTENSION flag is set, otherwise it is cleared.
If the driver supported creating an EGL target texture from a NPOT source EGLImage, it implicitly creates a NPOT texture. This does not need any glScalef() texture coordinate correction in LayerBase::drawWithOpenGL(). However, the same driver may not advertise the GL_ARB_texture_non_power_of_two extension nor generally support NPOT textures that were not derived from EGLImages. So SurfaceFlinger may flag only DIRECT_TEXTURE, not NPOT_EXTENSION.
Therefore, the test in LayerBase::drawWithOpenGL() should only perform the glScalef() if neither NPOT_EXTENSION or DIRECT_TEXTURE are flagged. Otherwise scaling is applied to NPOT EGL target textures when none is required.
It turns out we were not returning the density for anything retrieved from a
TypedArray... which basically means any bitmap references from a layout or style...!!!
This is now fixed.
Also fiddle with the density compatibility mode to turn on smoothing in certain situations,
helping the look of things when they need to scale and we couldn't do the scaling at
load time.
Merge commit '1521cd6e657ba4efa9382ab73d3cbba3bdf50ead'
* commit '1521cd6e657ba4efa9382ab73d3cbba3bdf50ead':
Reset the mDpiX and mDpiY values when qemu.sf.lcd_density is defined.
* changes:
Fix the IOException in wallpaper restore -- the padding isn't required at the end.
Fix bug 1982892 - batteryservice turns off device even while plugged in
Initial commit for review.
Integrated comments after patch set 1 review.
Fixed lockup in AudioFlinger::ThreadBase::exit()
Fixed lockup when playing tone with AudioPlocyService startTone()
* changes:
Add a flag to set whether the overlay has been initialized. Commit needs to be called at least once on each overlay, and it appears that sometimes this doesn't happen because the visibility never changes. With this change the overlay parameter and position will be committed when either the visibility of the window changes, or on the first call to visibility resolved, if it hasn't already been done.
doesn't happen because the visibility never changes. With this change
the overlay parameter and position will be committed when either the visibility
of the window changes, or on the first call to visibility resolved, if it
hasn't already been done.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
This changes the names of the directories in aapt, to what you see
in the list of DpiTest resources. Also adds a new "long" configuration
for wide screens, which the platform sets appropriate, and introduces
a new kind of resizeability for not large but significantly larger
than normal screens which may have compatibility issues.
This will be used to avoid unnecessarily listening to data from sensors
that function as event devices.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Patch supplied on advice of partner. This causes us to send suspend_sink to
Bluez via socket interface, so we enter suspend on the A2DP link faster.
This is especially important when switching to SCO so that we come closer to
whitepaper recommendations to suspend A2DP before setting up SCO.
We have another patch set to add DBUS A2DP suspend and resume calls to Bluez
that will do a better job of following whitepaper recommendations for
A2DP -> SCO -> A2DP, but this small patch is still an improvement.
The kernel can now publish a property describing the layout of virtual
hardware buttons on the touchscreen. These outside of the display
area (outside of the absolute x and y controller range the driver
reports), and when the user presses on them a key event will be
generated rather than a touch event.
This also includes a number of tweaks to the absolute controller
processing to make things work better on the new screens. For
example, we now reject down events outside of the display area.
Still left to be done is the ability to cancel a key down event,
so the user can slide up from the virtual keys to the touch screen
without causing a virtual key to execute.
Merge commit '8a715b4b791db4390d12e0ded02280592634a424'
* commit '8a715b4b791db4390d12e0ded02280592634a424':
Add useful functions to String8, which enables users to convert between UTF-8 and UTF-32
* changes:
Add useful functions to String8, which enables users to convert between UTF-8 and UTF-32 It will be used in SQL functions in external/sqlite/android. See https://android-git.corp.google.com/g/Gerrit#change,5511 for example.
Merge commit '88e209dcf8c2ebddda5c272f46d1bd5478bc639c'
* commit '88e209dcf8c2ebddda5c272f46d1bd5478bc639c':
Fix issue 1743700: AudioTrack: setPlaybackRate can not set the playback rate to twice of the ouputSR
Store sample rate on 32 bits instead of 16 bits in audio_track_cblk_t.
Removed sampleRate() methods from AudioTrack and AudioRecord: replaced by getSampleRate().
AudioTrack::setSampleRate() no returns a status.
Merge commit '991eec03a73f8803d0f8c80b418480ea25293cfb'
* commit '991eec03a73f8803d0f8c80b418480ea25293cfb':
Don't re-parse the framework resources all the time.
A small optimization to the resource code, to not re-parse the framework
resources every time we build a new AssetManager. Instead, you can now
construct a ResTable from a previously created one... of course, like the
existing code for using the data in-place, you can't delete the original
ResTable until you have deleted the one that has been constructed from it.
Merge commit 'c7396025e59524e7ef639fd86fc23123939ee91c'
* commit 'c7396025e59524e7ef639fd86fc23123939ee91c':
Return CAMERA_ERROR_SERVER_DIED to camera app when camera service dies (bug 1956726)
Merge commit '2bbb80e183c6492689f8b10b2d0f5dfe9872a6ac'
* commit '2bbb80e183c6492689f8b10b2d0f5dfe9872a6ac':
Less logging in some places. More in others.
Merge commit '58ebdcc06eca06741460a7db2be4b79e3865eb88'
* commit '58ebdcc06eca06741460a7db2be4b79e3865eb88':
fix [1947273] the DimLayer causes the whole screen to update during transactions
