* Move creation of final reply/forward text (i.e. new text plus
the original) to Rfc822Output, where it belongs.
* Prepares the way for use of SmartForward/SmartReply in
Exchange and replying w/ multipart/alternative in SMTP
* Moved test from MessageCompose to new Rfc822OutputTests, and note
that new tests should be added (this is not a regression; there
were never enough tests here)
Change-Id: Ibefb842f47cc9223714856d99b8d4f55b55f49e3
* Define new message-loaded state "FLAG_LOADED_DELETED" (used only for
POP3, which needs to write sentinel messages that are not displayed.)
* Also renamed the other flags to make the naming more consistent.
* Tweak MessageList query generation to inhibit display of deleted
message sentinels, and MessagingController won't try to resync them.
* Clean up implementation of Controller.deleteMessage()
* Add support for move to trash to MessagingController. This operates
in three primary modes:
* POP3 local delete (no server-side interaction)
* POP3 server delete
* IMAP server delete (and copy to IMAP trash mailbox)
* Add missing implementation in provider to delete all of the attachments
for a given message
* Fix progress reporting in activities (the test for error vs. progress
was inverted, which caused progress indicators to keep spinning
after errors.)
* Fix broken account settings UI (POP3 delete policy was not persisting)
Addresses bug 2097409
TODO delete from trash / empty trash
Change-Id: I00188e6dc2093823106e009f35b68c760227c9e6
* Fixes 2048663, 2025029, and 2100131
* Add "Trust Certificates" checkbox in EAS account creation
* Use custom ClientConnectionManager for HttpClient with registry
for plain, ssl, and tssl (trusted ssl) connection
* Use a ConnectionPool for HttpClient connections
* Remove "Domain" checkbox in EAS account creation
* Remove tests related to the "Domain" field
* TODO Write a test for valid usernames (requires a bit of research)
<name>, <email address>, <domain>/<name, and <domain>\<name> are all
valid, but there might be others
Change-Id: I4a0338df5960bfd3d679a88aaf22d1c49f49992b
* Set reply/forward flag and sourceKey as appropriate in MessageCompose
* Update provider tests accordingly
Change-Id: I7f49d80a735314a1a38f09fbf1f234257c41af8c
* Also create a bogus account if none exists to prevent setup failure
* Fixes#2087413 (Email large tests failing with Unknown URI)
* Fixes#2097361 (Duplicate email address when replying...)
Change-Id: I9ca2ac5f98db43e9009c22421c69956440356e34
* Use concrete declarations, not the old sample code
* Remove unused "sample" code
* Create ExchangeSender.java
* Strip out the unused (old sample code) parts of ExchangeStore.java
* Unit test to make sure EAS is being offered
* Fix "account leak" in AccountSettingsTests
This was triggered by donut bug # 2092944 but the solution is
different because we support EAS here.
* Add reply columns to Body
* Remove a bunch of unused columns from Message
* Update SQL tables, content read/write, etc.
* Small tweaks to app code that was not-really-using the old columns.
* Update existing unit tests for new/changed columns
* Disable TagsTests to solve a tests failure (prexisting, not caused by
this CL)
Change-Id: Ief493796dfe219669755170d76786f91570cbb9b
It was broken by CL 22378.
The bug was in the situation when "==" (two padding chars) were at
the end, the reading did not stop after the first '=',
and thus one more char of output was generated.
Add more unit-test for base64 decoding.
* Add \FLAGGED support to IMAP (writeback)
* Add code in Controller to kick MessagingController
* Rewrite pending commands system to scan through provider's updated
messages table and react
* Fix a unit test that I broke
* Cleaned out some of the old PendingCommand support
Addresses the 2nd half (upsync) of bug 1904385
TODO:
Can I add a unit test for IMAP flag writer?
Change-Id: I5a96a695d4f35fca1395506f165b86d9fb19b543
- fix bug 2080075, reply to message without text body.
- workaround bug 2077496 by temporarilly disabling the address adapter.
- unit test for MessageCompose.buildBodyText()
- use precompiled regex
* Finish IMAP/POP sections of Controller.sendMessage
* Rewrite MessagingController.sendPendingMessagesSynchronous
* Add deleteAllAttachmentFiles to AttachmentProvider, and unit test
* Rework sendMessage callbacks and integrate into MessageList UI
* Send pending from UI
TODO:
* Find other places from which to call deleteAllAttachmentFiles
* Message, etc. could be added, if this had a use case
* Unit test added for both Account and Mailbox cases
* Eclipse changed some parens around; it won't happen again
* Handle messages >25k
* When structure is available (e.g. IMAP) pull in the entire body
and the list of attachments
* When structure is not available (e.g. POP) pull in a large chunk of
the body to try and capture the message body at least.
* Implement loadAttachment for IMAP/POP to demand download large items
* Tested with IMAP & POP messages
INCOMPLETE (file bugs):
* implement logic for the old loadMessageForView calls that comes from
MessageView (when you open a message that's partially-loaded)
* Resolve handling of mimetype when attachment info is read (currently
we're assuming base64 in a couple of places)
* delete account => delete attachments
* delete attachment => delete file
* create account => clear existing attachments for acct id
* Reset DB version to "1"
* Added field and support code (save, restore, & parcel)
* Added forgotten mProtocolVersion to parcelable code
* Added unit test for parceling
Also, fixed race condition in SyncManager that was underlocking the
wake locks during tests.
- plus unit tests.
- and some attachment refactoring.
- move PROJECTION_ID up to EmailContent.
- add index on messageKey to Attachments and Body tables.
- add missing Columns.ID field in EmailContent.
* Change Sender definition (remove old Message from API) and update
any existing calls through that API
* Rewrite SMTPSender to use provider messages
* Add attachments to RFC822Output
* Minor bugfixes in RFC822Output
* Unit tests
IMAP messages up to about 25k will be downloaded properly.
* Move Store->Provider message rewrite code to a separate utility.
* Add code to descend a Store message and write provider attachments.
* Unit test basic IMAP attachment handler
TODO:
* handle large IMAP messages.
* unit test for POP
* unit test for large IMAP messages
* Triggers added for insert/delete/update of Message
* update of Mailbox will never set unreadCount
* Removed old test for unread counts and replaced with on
that tests trigger operation.
* Remove Account.updateUnreadCount (deprecated)
* Change service API to allow caller to supply complete target path/file
* Also allow caller to supply the final content_uri
* In MessageView, use full integration with EAS service API and
attachments content provider to enable:
* Save: Only works on SD card
* View: Works w/o SD card using content provider & intents
* Thumbnail previews
* Rewrite internals to use EmailProvider instead of raw db access
* Minor changes to APIs as necessary (and scattered changes to follow)
* Convert unit tests and check them
No change in functionality. Just getting a test infrastructure in place
before rewriting to use new EmailProvider. Provides tests for:
* get type (raw & thumb)
* open file (raw)
* open file (thumb)
* query
* resolveAttachmentIdToContentUri
* Moved logic into Controller:
* toggling read/unread
* toggling favorite status
* some new unit tests
* load attachment
* Completed logic for EAS to save attachments and MessageView to
begin and complete that process.
NOTE: Until EAS has a mode for saving the attachment locally (and I
rewrite the attachmentprovider to handle the new database) I am
implementing "view" attachment to just call "save". This means that
attachments "viewed" will be dropped onto the SD card, instead of
cached and flushed.
TODO: Controller is not properly working in its own thread, yet, so
we are not properly preventing ANR's yet.
* Numerous classes modified to deal with this change
* Fixes bugs 1993292 and 1994671
* Renamed various setter and getter methods to reflect the underlying
field names
* Renamed syncFrequency to syncInterval in Account and Mailbox
* Convenience method added to AccountSettings to save only user settings
* Calls to content.update(context, content.toContentValues()), which save
all fields, should be double-checked for correctness, making sure that
content has current data and will not conflict with other threads that
might modify that data
* Ran all unit tests to confirm proper function
NOTE: The logic to enforce single default account no longer works,
because that logic is in Account.save() and does not run via
Account.update(). I have patched out a small section of the relevant unit
test and will file a bug to come back for this fix.
* Remove all references to Account.mIsDefault, which was not the right
way to find the default account (it is lazy initialized)
* Change Account.getDefaultAccount to getDefaultAccountId, which is more
efficient and suitable in most uses.
* Wrote unit tests for provider default account handling
This should resolve bug 1983390 as well as a few other issues with default
account management.
* Added HTML support for Exchange 2007 and later
* Modified MessageView to show HTML parts of body (if present)
* Replace some unused convenience methods in Body to be ones that are more
useful (i.e. retrive body for a given message id)
* Made EAS sending operational
* Updated SyncManager to recognize the creation of new messages and check
for work to be done (i.e. starting Outbox sync)
* Modified MessageView to remove EmailContent.X references
* Also changed the pattern EmailContent.getContent(cursor, class) to the better
new ClassName().restore(cursor)
* Add a test of the utility to determine mime type from file name (since
EAS doesn't provide this with attachment header information)
* Fixed bug in ProviderTestUtils in which the base (EmailContent) fields weren't
being checked for equality in the various subclass equality testers. Fixed a
bug in saving emails that was caught by fixing this bug.
* clean up provider URI's in this area
* minor bugfix in EmailContent, and add auto-writeback of messageId into
saved attachments
* clean up existing attachment unit tests
* add new tests
* EmailProvider now saves Attachment records atomically with Message (and Body,
of course) if an ArrayList is stored in mAttachments
* Update EAS code to support attachment discovery
* Update EAS code to support attachment download via service API (preliminary)
* Add test for atomic attachment save
* Add test for unique file creation (external)
* Scan folders and write into child cursors
* Clicking a folder takes you to MessageList
* Remove most links to FolderMessageList (nearly dead!)
* Repair 1-account startup behavior (takes you directly to inbox)
* Cleanup a few basic things like context menus & refresh
TODO: Magic mailbox section at the top
TODO: As always, better linkage to sync engine(s)
TODO: Menus, context menus, etc.
TODO: Proper handling of expandable list - accounts should stay open?
* Longpress delete in MessageList
* Delete or Menu-Delete in MessageView
* Add deleteMessage() to Controller
* Unit tests for the new code in Controller
Merge commit '4f23ebd3dcca596533a33e6faedb446a814d32e3'
* commit '4f23ebd3dcca596533a33e6faedb446a814d32e3':
Fixed Pop3Store to be able to delete message in Inbox.
When delete policy is DELETE_POLICY_ON_DELETE, PENDING_COMMAND_TRASH
will be invoked. But in POP3 account, because of 1) Inbox is
OpenMode.READ_ONLY, 2) getMessage(uid) just after open() is not work
correctly, 3) remote Inbox folder is not closed after deleting message,
PENDING_COMMAND_TRASH does not work. And also the fat that some POP3
server use UID with '-' prevents PENDING_COMMAND_TRASH to recognize
the message is remote message.
Internal Bug: 1651709
Uses a mock provider to avoid touching production databases.
Includes utilities for creating accounts, mailboxes, and messages.
Tests basic object creation & readback, object deletion, and some
forms of hierarchical deletion. Has many TODO notes for additional
tests to be written.
In EmailContent, found & fixed a few fields that weren't being written to
the database properly.
