* We need to send date only (without time) in the VCALENDAR file for
all-day events
* Add unit test for this case
Bug: 2561789
Change-Id: I33a43c7a248059c97482ca147a23af083744118a
* We should be sending CANCEL as the method with cancellations
* Fix this and update unit test
Bug: 2527606
Change-Id: I2b982e4bfd1dbc57660cf578702edf49584d2957
A desktop shortcut to an account created on donut or before points at
com.android.email/.activity.FolderMessageList, which we've already removed.
- Added a dummy FolderMessageList to receive it and redirect to MessageList.
- Removed FolderMessageListUnitTests, which was left unremoved.
Bug 2535335
Change-Id: Ie5ffa158882633a4929c4c47a3d9625fd1626863
* Use one minute before/after for transition checking, instead of the
sloppier early version
* Add tests for additional known time zones
* Change most methods in CalendarUtilities to package private (for use
with unit tests)
* Clean up a little bad formatting
Change-Id: I9e5be5e1c859f2294adf06874459f7db15fb8c22
* EAS 2.5 doesn't like seeing bare LF's in Calendar location
and description, and Events including them won't sync back to
the server
* Create a utility to replace bare LF's with CRLF and write
unit test for the utility
* Fix the bug by using this utility
Bug: 2542220
Change-Id: I2c72d23f15e3a922ebe3585e063abe9fa9e2366f
* Fix the transition times so that they occur at the hour
* Remove an unused variable
* Fix a reference to Calendar.HOUR that should have been
Calendar.HOUR_OF_DAY
* Confirm that unit tests work properly
Change-Id: I3eaf31d160e97b5f3ba59c83878359085aea960d
* Sanity check runs through every TimeZone and makes sure that there
are no exceptions thrown
* Also, that we find at least 10x as many TimeZone's with RRULEs as
those without (empirical)
Change-Id: I2f266ac9d2a839f053bb5fda10a5b77dc8dd2c04
* We were sending cancellations with a request for reply, which is
incorrect
* Send the correct dats in the ics attachment
* Update unit test to reflect this
Bug: 2527606
Change-Id: I4cea0bb8f1c29a3cad8d09fd6a4750f7ab067229
* Add "vibrate when silent" choice in UI
* Add storage for it in Email's provider. Existing accounts default to
their current settings (always vibrate / never vibrate).
* Respect new mode when notifications are posted
* Updated existing unit tests
Bug: 2457183
Change-Id: I5c933ac39dbef8b2028255f330e0b084a445421a
* Yahoo! is not supporting search by UID so I can't identify the new
the UID after I upload. This inability to correlate the local and
remote messages means that we wind up syncing the same message back
down, in a loop, which spawns more messages.
* Yahoo! has partial support for UIDPLUS, and reports the new UID when
I append (upload) messages.
* Modify IMAP parser to parse response lists
* When APPENDUID is reported, use it (and skip the search)
* Modify the few other existing users of response lists to use the
parsed versions instead. Provided a couple of lightweight utilities
to make it easier to work with ImapList.
* Unit tests for most of it.
* Optimization: share a static date/time parser for all IMAP connections
Bug: 2448220
Change-Id: Ic10fc1a195ccf4671a498188cc8b17848c8d9df7
* Most clients send name= in the content-type, but a few clients
send only filename= in content-disposition.
* There was code to handle both cases, but due to two typos, it didn't
work.
* Most easily reproduced by sending from hotmail/live web client.
Bug: 2366961
Change-Id: I1d9a00b9b5fd1094cfb8566c3248d94286a8ae91
It's useful to debug MIME related problems.
- New MimeStreamParser.LOG_MESSAGE flag
- Cleaned up LoggingInputStream, which now supports all InputStream methods
(e.g. close, available, etc.) properly.
- LoggingInputStream now dumps non-printable ascii chars as '\xXX'.
Change-Id: I4391e125abd418defc1dc21e4f35cf6ef8448acb
* Turns out that Exchange 2003 requires the ics attachment to be in a
multipart/alternative, rather than a multipart/mixed MIME message
* Exchange 2007 accepts both types
* Therefore, we change our output for this particular situation, i.e.
a single attachment that is an ics file, to multipart/alternative
* Rename FLAG_SUPPRESS_CONTENT_DISPOSITION to FLAG_ICS_ALTERNATIVE_PART
and make this flag do double duty - 1) suppress the Content-Disposition
header (also required by Exchange) and 2) send the message as
multipart/alternative
* Add unit tests for Rfc822Output to check that mime parts are composed
properly
Bug: 2516394
Change-Id: I60e26f57b8ecaf01d0340e7828533334e0e7d45a
- Now SimpleIcsWriter does the UTF-8 conversion, and folds lines according
to the number of bytes in UTF-8.
- It now escapes special chars in TEXT values. You can safely put , ; \ or
line breaks. in summary, location, and description.
- Quotes all CN. (leftover from Ibb8f155a)
- Replace "s in CN with 's (rather than removing them)
Bug 2508283
Bug 2515768
Change-Id: Ibdced53ee32bba950608d63f507b11b24eaad7b0
* Add the (recurring) text when the invite is for a recurring
meeting
* Add a test for message text creation
Bug: 2515474
Change-Id: Ifefbc2ba1ac444175180cb7a58f4ec554d9674a3
* The utility wasn't handling commas properly, causing the referenced
bug
* Fixed the utility and updated the relevant test case
Bug: 2515488
Change-Id: Id229e50fcaaed1a0142db301eedaaba9209bed13
- In memory attachments are now stored as byte[], not String.
We can store any type of contents now.
- Added blob content_bytes to the Attachment table.
The content field is now deprecated and not used.
- Explicitly convert ICS files to UTF-8.
- Added Utility.to/fromUtf8().
Bug 2509287
Change-Id: I3785a365a9a34039ec12ba82bd857dcdbc4de92d
* We weren't sending out appropriate emails for exceptions and other
event updates
* Write exception specific ics file code in CalendarUtilities (in
the existing ics file creator)
* Send appropriate Update: subject for updated events/exceptions
* Compose simple message text consisting of:
When: <time>
Where: <location>
* Prepend message text for exceptions to indicate that the message
relates to a particular instance of the event:
This event has been canceled for: <date>
The details of this event have been changed for: <date>
* New strings were added in CL#44141
* Updated CalendarUtilities tests
Bug: 2501270
Change-Id: I920de8120bc56d5bd565cbde26ff4807be41579f
* Ignore CR and change LF into backslash + n
* Write unit test for handling of CRLF's
* Rename mLineCount to mColumnCount, which is more appropriate
Bug: 2508283
Change-Id: I8b2081aa474cb07b6cb09383ff6ac58a1dab1bba
I missed a case where message-id should not be set locally, which is
the case where the Mime parser clears all headers *and* does not find
a message-id. The parsed MimeMessage should accurately reflect this.
In the old code, the local id was created at construction time and then
immediately discarded by the parser (calling headers.clear()).
In the new code, I was generating a message-id any time I couldn't find
one. Now, when explicitly cleared or removed, I set a boolean to inhibit
automatic generation of a new one.
I also missed the fact that a missing message-id no longer throws an
exception, it simply returns null, and so I changed the code that was
catching that exception to simply check for null.
(Note: Clearly, modeling of legacy behavior is becoming annoying here;
It would be better to do away with all of the automatic logic, and simply
generate message-id locally when appropriate: On locally-generated
messages. I don't want to touch this for the current release, but I left
a note in the code to this effect.)
Bug: 2504774
Change-Id: Ibfcbd2363c7ae39ee6d44e4c3295f88258cb4945
Added DiscourseLogger, which stores last N (currently 64) lines of IMAP
commands sent to the server and responses received from the server.
We dump it to logcat when the IMAP parser crashes, that is, a) getting a
RuntimeException in ImapFolder.fetch() or b) getting a Runtime/IOException
in ImapResponseParser.
Bug 2480227
Change-Id: I6b5a728a7df106627ec29bb3c7c04a97a99b444b
Message and MimeMessage were creating a lot of unnecessary sub-objects
even when not needed, so do a bunch of lazy initialization. This should
raise the bar on the size of gigantic inboxes giving us trouble.
* Specific optimizations:
* Replace date formatter with a shared static
* lazy create mHeader (ArrayList)
* lazy create mFlags (HashSet)
* optimize MimeHeader fields class
* lazy create local message-ID (expensive-to-make uuid String)
* make message-id string less expensive to create
* Other cleanups:
* add some override annotations
* privatize some members
* update a fragile test (not a deep fix, it's still fragile)
Side effect, should be faster too.
Bug: 2357564
Bug: 2093422
Change-Id: I8a873879d402e2662339d5398ad0b15da6e580e9
This test has been failing since I60974b85, which is obviously correct,
so I modified the test.
Bug 2488770
Change-Id: I5a2eea19d9f3c3647b7c88a1e0db9297727b8e66
* Split account copy loop to do POP3 accounts first, then IMAP
* After upgrading accounts, upgrade folders
* Upgrade messages in those folders
* Preserve attachments on outgoing messages (e.g. drafts)
* Enable composer and start syncing after upgrade
* Fix latent bug in LocalStore (which was not used in Eclair)
* Add tests for upgrade workers in LegacyConversions
Bug: 2065528
* Prune all folders, messages & attachments that won't migrate
* Clean up SSL/TLS values for better connection results & security
* Move account setup lookup code to AccountSettingsUtils to share it
* Cleanup config/auto-rotation settings to prevent relaunch of
auto-discover or account check (from exchange).
* A couple of other very small fixes
Bug: 2065528
If the account specified with an Intent doesn't exist, show the Welcome
activity instead, which will navigate the user to the appropriate activity.
(e.g. account list if there're more than one account)
Bug 2479609
* Included is a (nearly complete) VCALENDAR parser that is
used to verify the contents of the ics attachments we create
* Added a test for meeting invitation
* More to come (always)
Change-Id: I31eeac66eb635f443c85aacf56e67a943cc3d53b
* VTIMEZONE blocks must be sent in our ics files for meeting
invitations that are recurring, as the originator's time zone
is critical in making attendee's calendars accurate
* Created a utility to convert TimeZone to VTIMEZONE data; the
utility successfully generates data (including recurrence rules)
for the entire tzinfo database (the source of TimeZone).
* Updated our ics files to include VTIMEZONE when appropriate and
send DTSTART/DTEND in local time in that case
* Wrote some unit tests, but more are needed
Change-Id: Iccbdd00cd3b2be2da058b344ebacd17ed6fb0e3d
We've observed that the secure.emailsrvr.com email server returns an excess
FETCH response for a UID FETCH command. Excess responses don't have the
UID field, even though we request, which led the response parser to crash.
This patch fixes it by making the parser ignore response lines that don't
have UID.
Bug: 2441065
On the first boot after upgrade from Eclair, enable calendar sync for all the
existing Exchange accounts, if any, and show notification.
Note on this version, nothing happens when you click on the "Calendar added"
notification. We're waiting for an API (action or something) to launch
calendar.
Bug 2428718
* When the user selects accept/decline/tentative in MessageView, we now send
an email to the organizer, with an iCalendar attachment indicating the reply
* Added a unit test for the reply case, but more tests to be added to handle
other circumstances
Change-Id: Iff799d88a92b6546735bf4965b22febf3a82b56f
* Wrote utility to create an ics file (iCalendar) based on a
CalendarProvider Event. This is a good first pass, but we need
to consider whether to include alarms, etc.
* Use aforementioned utility and new convenience method to send
meeting invitations to attendees of newly created meetings (events)
when they are uploaded to the server via the CalendarSyncAdapter
* Overall, attempted to modify existing provider and rfc822 output
code as little as possible. Rfc822Output is actually very limited
in its capabilities and should be made more robust in future
Change-Id: Ie20b9137df56dc414de6737d05fa40ec9cdf47e0
* We can use this for meeting request information which will start out with
one or two pieces of information, but might grow in the future.
* Binary compatible with Address.pack() format, so we can eventually
combine code.
* Added two columns to Attachment in EmailProvider
content: content that is written directly as an attachment
suppressDisposition: to suppress the content-disposition header
All meeting invitation emails use these two columns; the first
for ics attachment data (which is quite small, rarely over 1k),
and the second to indicate NOT sending the content-disposition
header; without this, Exchange will consider the ics as an
attachment rather than an iMIP style message (rfc2447)
* Modified tests to include these columns; added upgrade code for
new database version
* New columns and code are designed to be usable outside Exchange,
although there are no other clients of the code at this point.
* Modified Rfc822Output to use the content field, if present, in
lieu of retrieving attachment data via URL; added support for
suppressing the Content-Disposition header
- Now that reconcileAccountsWithAccountManager() is static, we don't need to
instantiate SyncManager.
- Don't need to set mResolver. reconcileAccountsWithAccountManager() doesn't
use it.
* Make the field and label GONE for EAS accounts
* Enable the "Done" button at all times for EAS accounts
* Add test case for this, and clean up bad formatting in tests
Bug: 2443881
Change-Id: Ic80b001e443fa37b7cfeb810b1f31edf22b065b9
1. Destructive of existing user accounts in device
2. Can get confused (miscounting) due to existing user accounts
3. Cleaned up use of context and mock context
4. Disallow account backup and account security updates when testing
5. Make account manager removeAccount() calls blocking, so the test
does not proceed until the accounts are really deleted.
Bug: 2454870
If the user revokes device admin status, reset our internal state and
the state of any accounts that might have been depending on it. This
halts syncing immediately and rewinds the security/provisioning state
of any such accounts to a known state (as if the account had just been
created.)
Bug: 2387961
* Added a meetingInfo column to the Message database
* When a meeting invite is received, the start time is stored here
in ms from start of epoch. Note that this field is defined to be
a String, for extensibility
* Update ProviderTests
Change-Id: If44892d27ccc5ebdc1f8667befafb8b8a27a2cf4
* Provisioning for Exchange 2003 and Exchange 2007 now supported
* Added end-to-end test of Exchange 2003 provisioning parser
Change-Id: I1f86f2909351a8220b963551cd33fecdf59a7e26
* Use a content observer to detect changes in Calendars; we use this to
determine whether or not sync has been turned off. If sync is turned
off, all events will be deleted, so we need to reset the sync key
* Make sure that all code working on Contacts also now works on Calendar
(push, etc.)
* Remove some old crufty logging and out-of-date comments
* Addresses 2433061
Bug: 2433061
Change-Id: I6299168903fcce9bf820b72b5f6bb157d9169653
* When the UI indicates that security policies for a particular
account are now in force and releases the security hold (a bit
in the Account flags), we release any syncs that had been
waiting due to security errors
* Clean up code related to sync holds
* Add unit test for sync hold release
* Add support for server-directed remote wipe
Change-Id: I6209f75e4b57c850ae1ac27f407630c9c740514f
* Add hold flag to Account flags
* Add code to set it (when EAS reports policy failure)
* Add code to clear it when we see changes from the device admin side
* unit tests
This should be sufficient to restart sync of an account which is on hold
due to security policy requirements. Note, this is considered a "retry",
and if the account still does not meet requirements for some reason, it
is expected that EAS sync will call policiesRequired() again.
* Create notification to display when syncs fail due to security
* Create psuedo-activity (no UI) to manage device admin state transitions
* Clean up and flesh out SecurityPolicy APIs'
* Add placeholders in EasSyncService showing how to react when policies
are not met and sync cannot continue.
Note: There are some STOPSHIP todo's at the top of SecurityPolicy.java.
These should explain any code that you might think is "missing".
* Create full TZI strings for upload of events (previously, we
omitted DST information)
* Add documentation to some unit tests
* Put in correct logic for determining if upload needed
* Fix problem w/ parsing empty tags
Change-Id: I268ce8a2db30b3cfdf0e44f6a78befd6bd933243
remove-exchange-support.sh makes it possible to build the email app without
exchange support.
This script:
- removes all packages under com.android.exchange.
- removes all lines surrounded by EXCHANGE-REMOVE-SECTION-START and
EXCHANGE-REMOVE-SECTION-END
And the resulting source should still build and run fine.
Bug: 2369784
New behavior:
* There are two primary paths through this activity:
* Edit existing:
* Load existing values from account into fields
* When user clicks 'next':
* Confirm not a duplicate account
* Try new values (check settings)
* If new values are OK:
* Write new values (save to provider)
* finish() (pop to previous)
*
* Creating New:
* Try Auto-discover to get details from server
* If Auto-discover reports an authentication failure:
* finish() (pop to previous, to re-enter username & password)
* If Auto-discover succeeds:
* write server's account details into account
* Load values from account into fields
* Confirm not a duplicate account
* Try new values (check settings)
* If new values are OK:
* Write new values (save to provider)
* Proceed to options screen
* finish() (removes self from back stack)
* Added unit test for new loadFields method
Bug: 2412300
* Create unit test to reproduce crash
* Fix handling of empty bundle (the default return value)
* Clean up some exception handling in the policy module loader, which
reduces some unneeded logging.
Bug: 2413388
* Begin wiring into system DevicePolicyManager requirements
* Semi-real implementations of isSupported() & isActive()
* Added new API (placeholder) updatePolicies()
* Updated existing unit tests as needed
Bug: 2387961
* scrub all external strings to keep them compliant for IMAP protocol
* move Build.MODEL to x-android-device-model
* send x-android-mobile-net-operator
* send AGUID
* unit tests for above
* retrieve providers from VendorPolicyLoader
Bug: 2332183
Moved Eas.ACCOUNT_MANAGER_TYPE to Email.EXCHANGE_ACCOUNT_MANAGER_TYPE.
This constant is not related to the exchange protocol, and referred in
a lot of different places. Moving it out of the package will make it a lot
simpler when removing exchange dependency.
What should be working:
* Events sync down from server and appear in calendar
* Recurrences and exceptions appear in calendar
* Changed events on server should be reflected in calendar
* Deletions on server should be reflected in calendar
* Push of new/changed/deleted events should work
* Changes on device are NOT synced back to server
* New, single events on device are synced back to server
(no time zone, attendee, or recurrence support)
* Checkbox for syncing calendar added to setup flow
* System sync glue in manifest, etc.
* Bugs are to be expected
* A few unit tests; needs more
Change-Id: I7ca262eaba562ccb9d1af5b0cd948c6bac30e5dd
- Dynamically switch to the alternate exchange strings to substitute overlays.
- Added the mechanism to load the "vendor policy", which tells you when the
alternate strings should be used.
Bug: 2382710
Merge commit '08d92ebf4722e45216ee225775a3b86f9ceecc0d'
* commit '08d92ebf4722e45216ee225775a3b86f9ceecc0d':
Trim the mime type portion of Content-Type.
* AccountSetupExchange defaultly tries using EAS AutoDiscover, which isn't
appropriate in the unit test setting
* Add an Intent extra to disable AutoDiscover and use it in unit tests
Bug: 2382368
Change-Id: I3d4e8d7194b02da44ad583da0cf2fe60ffb19311
* Add IMAP ID command to all login sequences
* Send generic information for now
* Explicitly catch & discard parsing errors, since we really don't
care if the command succeeds or not.
* Unit tests
Bug: 2332183
* Upgrade accounts table to add security column
* Read/Write new column
* Backup/Restore new column
* Unit tests for all of the above
* First cut at defining bitfields (non-binding, just putting down ideas)
Bug: 2387961
* Followup to 85d765f4
* Workaround for (HTC bug: 2275383) & (Moto bug: 2226582)
* Restores mSyncKey as null instead of empty string, which is how
a new account is initialized. Bug: 2385980
* Cleanup synchronized logic in backup & restore
* Minor cleanups & improved comments
Cherry-picked from master d612717340
* Followup to 5e91cccd
* Workaround for (HTC bug: 2275383) & (Moto bug: 2226582)
* Restores mSyncKey as null instead of empty string, which is how
a new account is initialized. Bug: 2385980
* Cleanup synchronized logic in backup & restore
* Minor cleanups & improved comments
* Workaround for (HTC bug 2275383) & (Moto bug 2226582)
* Adds checkpoints for backing up and restoring accounts
* Uses legacy Account / prefs to back up accounts - this is because
some of this code will be reused for legacy account migration
* Unit tests of Account & LegacyConversions
* Unit tests of backup & restore
* Not done: testing of EAS/Account Manager interface (this will require
deeper dependency injection, to avoid the embedded calls to the Account
Manager and other system services.)
Cherry-picked from master 5e91cccd4b
* Workaround for (HTC bug 2275383) & (Moto bug 2226582)
* Adds checkpoints for backing up and restoring accounts
* Uses legacy Account / prefs to back up accounts - this is because
some of this code will be reused for legacy account migration
* Unit tests of Account & LegacyConversions
* Unit tests of backup & restore
* Not done: testing of EAS/Account Manager interface (this will require
deeper dependency injection, to avoid the embedded calls to the Account
Manager and other system services.)
* Addresses #2287439 incompletely
* The most likely reason for a reply/forward to get stuck in the Outbox
is that the referenced message has been deleted from the client, with
the deletion occuring BEFORE the message gets sent (currently, the two
are completely independent)
* This change causes deletes NOT to be sent to the server if the message
to be deleted is referenced by an outgoing message
Change-Id: Iad3777282385bea82276f363d6f95ba8b07cc01c
* Addresses #2226426
* Recognize the case in which there is no EmailProvider Account corresponding
to an AccountManager account (the case being addressed is that of the
EmailProvider database being deleted due to corruption
* In this case, delete the AccountManager account so that the two are in
sync
* Refactor and add unit test for account reconciliation
Change-Id: I356b8bfaa0846f85223cc15994b750df207a63ea
* Addresses #2287439 incompletely
* The most likely reason for a reply/forward to get stuck in the Outbox
is that the referenced message has been deleted from the client, with
the deletion occuring BEFORE the message gets sent (currently, the two
are completely independent)
* This change causes deletes NOT to be sent to the server if the message
to be deleted is referenced by an outgoing message
Change-Id: I146f63ab345c07e684790e1d7d1fc08870468bbf
* Addresses #2226426
* If the user deletes Email data, or if data corruption causes
EmailProvider.db to be deleted, we will be in an inconsistent
state with any existing Exchange accounts, since the AccountManager
will still know about them, contacts (and eventually calendar) items will
continue to exist, etc.
* Run an integrity check when the provider is created, deleting any
orphaned EmailProvider.db or EmailProviderBody.db
* Catch SQLiteException's in the Provider and do an integrity check
if any is caught
Change-Id: I47d523b90a6b8f71ba8e13fba4b04846b3da1b1d
Case #1:
* Fixes#2184702
* Messages can be in the base Messages table, but also in
Message_Deletes and Message_Updates; the latter two were not
being purged of deleted messages.
* This CL deletes from all three tables when a Mailbox is deleted
* Also run a check for orphaned deletes/updates when the email
provider's db is first opened
* Unit test updated to check for proper deletion
* Unit test for the provider check for orphans
Case #2:
* Fixes#2184708
* Messages in Outbox/Drafts can get modified or deleted, but the
rows added to the updates/delete tables never get removed because
the boxes don't sync
* Added code to SyncManager.ping (which gets notifications of these
changes) to delete these rows
Change-Id: Ib53e441136b0da1e88bc220150d631999058a8f0
* For each attachment we add, check the DB for an existing attachment
with similar metadata (name, mime type, content id, etc.)
* Skip adding them if already held
* Unit tests
Originally fixed in 5b0a12c199 / CL I036f39c6
Fixes bug http://b/2084704
* For each attachment we add, check the DB for an existing attachment
with similar metadata (name, mime type, content id, etc.)
* Skip adding them if already held
* Unit tests
Fixes bug http://b/2084704
Some IMAP servers return NIL if you BODY.PEEK[TEXT] a messsage with
no body, instead of the more canonical {0}CRLF. Instead of messing with the
parser to deal with that, it makes more sense not to try and fetch empty
bodies. So there are three changes:
* Don't fetch parts when size = 0
* Don't append "null" when there is null body text
* Slight change to attachment handling so size is reported >0
* Unit tests on some of the related lower-level protocol stuff
Bug http://b/issue?id=2160387
Change-Id: Ifb8fb0ed5ce7297908e1ae8d5a02dda5975c4a3c
* MessageCompose now adds message-id to new messages (it was previously
done on its behalf by MimeMessage).
* LegacyConversions.updateMessageFields() now handles missing message-id
without error.
* Unit tests for the LegacyConversions change
These two issues were combining with a failure of comcast's SMTP server
to insert message-id headers, to prevent delivery of a message between
any two comcast accounts using this client.
Bug # http://b/issue?id=2161478
* Add AttachmentProvider.deleteAllMailboxAttachmentFiles
* Call it when server deletes a mailbox
* Confirmed (no change) all message deletes call deleteAllAttachmentFiles
* Unit tests of course :)
Bug # 2069004
Change-Id: I99731e6489fdca4cc9cebdff5fcf9c09d12b7b3a
* Add "Accept all certificates" modes to incoming/outgoing secure choices
* Change URI scheme slightly to make "trust" a flag, not part of the
protocol.
* Change Stores to know about new URI scheme
* Slightly rework Transport API to make "trust" an independent flag
* Adapt HostAuth to handle new Uri scheme
* Remove the old ambiguous "optional" code, which was allowing
some unsigned certificates, but was *also* allowing TLS to
optionally start (though not SSL, despite the UI strings.)
* Add a few unit tests to EmailContent
* Add logging and a bunch of comments to TrustManagerFactory, and a bit
of simple cleanup to make it more readable.
* Add missing conversion of SSLException->CertificateValidationException
in TLS so we get the correct certificate errors from TLS too.
* Re-enable TLS for mac.com accounts (which had a certificate problem)
Fixes bug http://b/2119755, http://b/1374780, and probably a raft of
earlier and/or external bugs about certificate problems.
Change-Id: Iaf99a8da3eaadaa4cdeec224737838b5d6813e55
* Create logic to detect upsyncable messages in Sent
* Note: Drafts is now local only for IMAP - no sync, either way
* Rewrite MessageController.processPendingAppend for Provider world
* Write provider message -> legacy message converter
* Fixed bug in IMAP APPEND (it was not picking the right UID for the
uploaded message.)
* Better handling of server internaldate
* Add constants for new X-Android-Body-Quoted-Part header
* Add EmailContent routines to get each of the 5 parts of the body
* Remove "Load more" from unsynced message lists
* Add toString to MimeHeader for debug support
Bug # 2097471
TODO (next CL): Upload attachments records too
Change-Id: I209182f5adc6b6696919f559e3cbbdd58b3eed3a
* Add new introText column in the Body database
* Reply/Forward put the appropriate String into this new column
* Rfc822Output uses this when required when streaming the message
Change-Id: I34602fdb3f91692c46fc8bc31ba0e6f680d445a0
* Get rid of old Account.getxxxFolderName() calls.
* Clean up any call sites to them
* Properly rename the existing special folder name identifiers
* Use a hash table in MessagingController to improve identification
of special folders for IMAP accounts
* Fix a bug in Controller, which was creating new server-side folders
using localized names.
* Fix a bunch of code in Controller that was using mContext, instead of
using mProviderContext to support testability.
* Fix broken unit tests in ControllerProviderOpsTests
Fixes bug 1904373
* Write unit test to replicate failure(s) in POP3 use of parseInt. All
calls to parseInt must be guarded by try/catch NumberFormatException.
* Fix the failures
Bug # 2115586
* Check for existing accounts with matching servername + username
* Show a dialog and block account creation
* Triggers in three cases:
* After input of an auto-setup account (e.g. Gmail or AOL)
* After input of manual setup (incoming) parameters
* After changing incoming parameters of *any* existing account
* Made some notes in EmailContent regarding fields in HostAuth that we
are not actually using.
* Added HostAuth unit tests
Primarily fixes bug # 1964449
Bonus fix for bug # 1594408
Change-Id: I49310faf6654280582e0ab3d3e40f2701bfcd21d
* SmartForward and SmartReply are EAS commands that automatically
include the original message and, if a forward, all original
attachments, regardless of whether they've been downloaded to
the device
* Both commands improve battery life by sending less data; greatly
so for SmartForward if there are attachments
Change-Id: I12432cd5275a3b54e9a80d5cd59da437c4a086cc
* Move creation of final reply/forward text (i.e. new text plus
the original) to Rfc822Output, where it belongs.
* Prepares the way for use of SmartForward/SmartReply in
Exchange and replying w/ multipart/alternative in SMTP
* Moved test from MessageCompose to new Rfc822OutputTests, and note
that new tests should be added (this is not a regression; there
were never enough tests here)
Change-Id: Ibefb842f47cc9223714856d99b8d4f55b55f49e3
* Define new message-loaded state "FLAG_LOADED_DELETED" (used only for
POP3, which needs to write sentinel messages that are not displayed.)
* Also renamed the other flags to make the naming more consistent.
* Tweak MessageList query generation to inhibit display of deleted
message sentinels, and MessagingController won't try to resync them.
* Clean up implementation of Controller.deleteMessage()
* Add support for move to trash to MessagingController. This operates
in three primary modes:
* POP3 local delete (no server-side interaction)
* POP3 server delete
* IMAP server delete (and copy to IMAP trash mailbox)
* Add missing implementation in provider to delete all of the attachments
for a given message
* Fix progress reporting in activities (the test for error vs. progress
was inverted, which caused progress indicators to keep spinning
after errors.)
* Fix broken account settings UI (POP3 delete policy was not persisting)
Addresses bug 2097409
TODO delete from trash / empty trash
Change-Id: I00188e6dc2093823106e009f35b68c760227c9e6
* Fixes 2048663, 2025029, and 2100131
* Add "Trust Certificates" checkbox in EAS account creation
* Use custom ClientConnectionManager for HttpClient with registry
for plain, ssl, and tssl (trusted ssl) connection
* Use a ConnectionPool for HttpClient connections
* Remove "Domain" checkbox in EAS account creation
* Remove tests related to the "Domain" field
* TODO Write a test for valid usernames (requires a bit of research)
<name>, <email address>, <domain>/<name, and <domain>\<name> are all
valid, but there might be others
Change-Id: I4a0338df5960bfd3d679a88aaf22d1c49f49992b
* Set reply/forward flag and sourceKey as appropriate in MessageCompose
* Update provider tests accordingly
Change-Id: I7f49d80a735314a1a38f09fbf1f234257c41af8c
* Also create a bogus account if none exists to prevent setup failure
* Fixes#2087413 (Email large tests failing with Unknown URI)
* Fixes#2097361 (Duplicate email address when replying...)
Change-Id: I9ca2ac5f98db43e9009c22421c69956440356e34
* Use concrete declarations, not the old sample code
* Remove unused "sample" code
* Create ExchangeSender.java
* Strip out the unused (old sample code) parts of ExchangeStore.java
* Unit test to make sure EAS is being offered
* Fix "account leak" in AccountSettingsTests
This was triggered by donut bug # 2092944 but the solution is
different because we support EAS here.
* Add reply columns to Body
* Remove a bunch of unused columns from Message
* Update SQL tables, content read/write, etc.
* Small tweaks to app code that was not-really-using the old columns.
* Update existing unit tests for new/changed columns
* Disable TagsTests to solve a tests failure (prexisting, not caused by
this CL)
Change-Id: Ief493796dfe219669755170d76786f91570cbb9b
It was broken by CL 22378.
The bug was in the situation when "==" (two padding chars) were at
the end, the reading did not stop after the first '=',
and thus one more char of output was generated.
Add more unit-test for base64 decoding.
* Add \FLAGGED support to IMAP (writeback)
* Add code in Controller to kick MessagingController
* Rewrite pending commands system to scan through provider's updated
messages table and react
* Fix a unit test that I broke
* Cleaned out some of the old PendingCommand support
Addresses the 2nd half (upsync) of bug 1904385
TODO:
Can I add a unit test for IMAP flag writer?
Change-Id: I5a96a695d4f35fca1395506f165b86d9fb19b543
- fix bug 2080075, reply to message without text body.
- workaround bug 2077496 by temporarilly disabling the address adapter.
- unit test for MessageCompose.buildBodyText()
- use precompiled regex
* Refactor the sync adapters to separate out parsing from commit
* Use ContactsProvider to save the SyncKey for contacts
* Fixes#2072664 and #2072456
Change-Id: I1e85c498496e83d9523489636a75f366f7fbd106
* Finish IMAP/POP sections of Controller.sendMessage
* Rewrite MessagingController.sendPendingMessagesSynchronous
* Add deleteAllAttachmentFiles to AttachmentProvider, and unit test
* Rework sendMessage callbacks and integrate into MessageList UI
* Send pending from UI
TODO:
* Find other places from which to call deleteAllAttachmentFiles
* Message, etc. could be added, if this had a use case
* Unit test added for both Account and Mailbox cases
* Eclipse changed some parens around; it won't happen again
* Handle messages >25k
* When structure is available (e.g. IMAP) pull in the entire body
and the list of attachments
* When structure is not available (e.g. POP) pull in a large chunk of
the body to try and capture the message body at least.
* Implement loadAttachment for IMAP/POP to demand download large items
* Tested with IMAP & POP messages
INCOMPLETE (file bugs):
* implement logic for the old loadMessageForView calls that comes from
MessageView (when you open a message that's partially-loaded)
* Resolve handling of mimetype when attachment info is read (currently
we're assuming base64 in a couple of places)
* delete account => delete attachments
* delete attachment => delete file
* create account => clear existing attachments for acct id
* Reset DB version to "1"
* Added field and support code (save, restore, & parcel)
* Added forgotten mProtocolVersion to parcelable code
* Added unit test for parceling
Also, fixed race condition in SyncManager that was underlocking the
wake locks during tests.
- plus unit tests.
- and some attachment refactoring.
- move PROJECTION_ID up to EmailContent.
- add index on messageKey to Attachments and Body tables.
- add missing Columns.ID field in EmailContent.
* Change Sender definition (remove old Message from API) and update
any existing calls through that API
* Rewrite SMTPSender to use provider messages
* Add attachments to RFC822Output
* Minor bugfixes in RFC822Output
* Unit tests
IMAP messages up to about 25k will be downloaded properly.
* Move Store->Provider message rewrite code to a separate utility.
* Add code to descend a Store message and write provider attachments.
* Unit test basic IMAP attachment handler
TODO:
* handle large IMAP messages.
* unit test for POP
* unit test for large IMAP messages
* Remove all use of Strings in favor of the parser's static final int's
* Strings remain in Tags for debugging output only
* Renamed lots of classes to be more consistent
* Centralized logging behavior in Eas class
* Found and fixed some bugs in the process:
- Account deletion wasn't removing HostAuth's correctly in the trigger
- Adding a second EAS account was trashing the first one
- Fixed looping sync behavior caused by Exchange 2003 bug
* Triggers added for insert/delete/update of Message
* update of Mailbox will never set unreadCount
* Removed old test for unread counts and replaced with on
that tests trigger operation.
* Remove Account.updateUnreadCount (deprecated)
* Modify to work with ContactsProvider2
* Modify to work with system AccountManager
* Modify to work with system SyncManager (for triggering user-change syncs)
* Sync server->client for adds/deletes implemented (CP2 doesn't handle delete yet)
* Sync server->client changes handled efficiently (only write changes)
* Some fields still not handled
* Rewrote most of the CPO code to handle server->client changes
* Sync client->server works for supported fields
* Change service API to allow caller to supply complete target path/file
* Also allow caller to supply the final content_uri
* In MessageView, use full integration with EAS service API and
attachments content provider to enable:
* Save: Only works on SD card
* View: Works w/o SD card using content provider & intents
* Thumbnail previews
* Rewrite internals to use EmailProvider instead of raw db access
* Minor changes to APIs as necessary (and scattered changes to follow)
* Convert unit tests and check them
No change in functionality. Just getting a test infrastructure in place
before rewriting to use new EmailProvider. Provides tests for:
* get type (raw & thumb)
* open file (raw)
* open file (thumb)
* query
* resolveAttachmentIdToContentUri
* Moved logic into Controller:
* toggling read/unread
* toggling favorite status
* some new unit tests
* load attachment
* Completed logic for EAS to save attachments and MessageView to
begin and complete that process.
NOTE: Until EAS has a mode for saving the attachment locally (and I
rewrite the attachmentprovider to handle the new database) I am
implementing "view" attachment to just call "save". This means that
attachments "viewed" will be dropped onto the SD card, instead of
cached and flushed.
TODO: Controller is not properly working in its own thread, yet, so
we are not properly preventing ANR's yet.
* Numerous classes modified to deal with this change
* Fixes bugs 1993292 and 1994671
* Renamed various setter and getter methods to reflect the underlying
field names
* Renamed syncFrequency to syncInterval in Account and Mailbox
* Convenience method added to AccountSettings to save only user settings
* Calls to content.update(context, content.toContentValues()), which save
all fields, should be double-checked for correctness, making sure that
content has current data and will not conflict with other threads that
might modify that data
* Ran all unit tests to confirm proper function
NOTE: The logic to enforce single default account no longer works,
because that logic is in Account.save() and does not run via
Account.update(). I have patched out a small section of the relevant unit
test and will file a bug to come back for this fix.
* Remove all references to Account.mIsDefault, which was not the right
way to find the default account (it is lazy initialized)
* Change Account.getDefaultAccount to getDefaultAccountId, which is more
efficient and suitable in most uses.
* Wrote unit tests for provider default account handling
This should resolve bug 1983390 as well as a few other issues with default
account management.
* Added HTML support for Exchange 2007 and later
* Modified MessageView to show HTML parts of body (if present)
* Replace some unused convenience methods in Body to be ones that are more
useful (i.e. retrive body for a given message id)
* Made EAS sending operational
* Updated SyncManager to recognize the creation of new messages and check
for work to be done (i.e. starting Outbox sync)
* Modified MessageView to remove EmailContent.X references
* Also changed the pattern EmailContent.getContent(cursor, class) to the better
new ClassName().restore(cursor)
* Add a test of the utility to determine mime type from file name (since
EAS doesn't provide this with attachment header information)
* Fixed bug in ProviderTestUtils in which the base (EmailContent) fields weren't
being checked for equality in the various subclass equality testers. Fixed a
bug in saving emails that was caught by fixing this bug.
* clean up provider URI's in this area
* minor bugfix in EmailContent, and add auto-writeback of messageId into
saved attachments
* clean up existing attachment unit tests
* add new tests
* EmailProvider now saves Attachment records atomically with Message (and Body,
of course) if an ArrayList is stored in mAttachments
* Update EAS code to support attachment discovery
* Update EAS code to support attachment download via service API (preliminary)
* Add test for atomic attachment save
* Add test for unique file creation (external)