Discover the logcat buffer size, divide by the worst storage
speed in kb/s, and multiply by ten to estimate the timeout in
ms for each named buffer. If that value is less than 20 seconds,
then select 20 seconds. Apply this to each logcat request.
Bug: 21555259
Change-Id: Id36aebff83cb06e94350e4a84fa266b66a8444fc
Dumpsys utility accesses layer compositionType variable
with out proper protection. These variables are modified
during hwc_prepare call. Existing HAL lock protection is not
sufficient to address this issue. Failure to do this will
result in incorrect state reporting in dumpsys.
A new displayLock mutex in HWComposer will be used in both
dumpsys and draw calls to ensure correct state is accessed.
Change-Id: I8a57de59525adc0e089b3bed95c067c01e42b666
Validate the display binder by adding a NULL check in getDisplayConfigs.
This will prevent a false match if the caller queries the display
configs for an inactive display (whose binder is NULL by default).
Without this change we might end up attempting to index the display
config array, which is unpopulated for inactive displays, and this will
result in a crash. (See getDisplayInfo in SurfaceComposerClient.cpp for
an example of this scenario)
Change-Id: Ib32a7dc8378d3438df0dba1ecd608bbcfc837717
When we have excess pixels that need to be removed from (for example)
the left and right sides, we currently do something like:
left += excess / 2;
right -= excess / 2;
If excess is odd, however, this removes 1 too few pixels since the odd
pixel gets rounded down twice. This changes the math to effectively:
left += excess / 2;
right -= (excess - excess / 2);
Which removes the correct total number of pixels.
Bug: 19611086
Change-Id: I8d1ad9fe7ba67c149794c148663d12acbccccef0
(cherry picked from commit ec4cb38750)
Swaps width and height when capturing a screenshot that is rotated by
90 or 270 degrees.
Bug: 8433742
Change-Id: Ibf0b604f541e3cc271e56fe0ad04dc366beb5d79
(cherry picked from commit 3502416204)
Apply the display transform to surface damage, but don't intersect it
with the viewport.
Bug: 21486007
Change-Id: I94e697cea52096a960385d5f3b89609fdcf30a02
(cherry picked from commit 17833a1b0d)
Adds a getConsumerName method to IGraphicBufferProducer and Surface.
Currently, the name is cached inside of IGBP and is update on connect
and dequeueBuffer, which should be good enough for most uses.
Bug: 6667401
Change-Id: I22c7881d778e495cf8276de7bbcd769e52429915
(cherry picked from commit c6f30bdee1)
This change allows producers to set a generation number on a
BufferQueue. This number will be embedded in any new GraphicBuffers
created in that BufferQueue, and attempts to attach buffers which have
a different generation number will fail.
It also plumbs the setGenerationNumber method through Surface, with the
additional effect that any buffers attached to the Surface after
setting a new generation number will automatically be updated with the
new number (as opposed to failing, as would happen on through IGBP).
Bug: 20923096
Change-Id: I32bf726b035f99c3e5834beaf76afb9f01adcbc2
(cherry picked from commit 812ed0644f)
The selinux_status_*() interfaces require calling selinux_status_open()
first. Since this was not being called by servicemanager, the
selinux_status_updated() call was always failing and servicemanager
was not reloading service_contexts upon a policy reload.
Change-Id: I6ac62e114bbca99c5f0999feb918fcde15009274
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Clears the sp<GraphicBuffer> returned by createGraphicBuffer when there
is an error during unflattening.
Bug: 21498231
Change-Id: I886da4474fc06853cc59188d62044b7d7549126b
(cherry picked from commit 6a04e5fcf6)
On devices that have the crop image extension the crop is not applied to the
transform matrix so we have to expect different results in this case.
Change-Id: If62dec1111fb77c9fa2c4332d121665960ce0216
(cherry picked from commit 04b00cea67)
Reduces the number of resync samples that DispSync will attempt to
collect without an intervening present from 12 to 4. The former value
was causing excessive power draw for some vendors' implementations, and
reducing it doesn't seem to harm anything.
Bug: 20724456
Change-Id: Ifd6e0490be67756ed001d509a38e8a36953b4618
(cherry picked from commit 9c64757f65)
Applies GRALLOC_USAGE_ALLOC_MASK to the incoming usage bits before
calling alloc on the gralloc module. This filters out the new flag
GRALLOC_USAGE_FOREIGN_BUFFERS, which is used to send a hint to the
producer, but which does not affect the allocation of buffers.
Bug: 19801661
Change-Id: Ia37a3eddba2e97598e50ac3e10877430adfa9247
(cherry picked from commit b8efdc4003)
The product of width and height should be less than UINT32_MAX (in practice
smaller). Adding the checks prevents overflows when allocating buffers.
Bug: 20726612
Change-Id: I9769edf0688a9bfe69906d49fa0540cadf4c49b0
(cherry picked from commit 1c4537e2e8)
Early during the boot, before activity manager is ready to handle
permission checks, the system needs to be able to change the display
state. Added a hardcoded exemption for AID_SYSTEM (which already
has permission to talk to surface flinger anyhow).
Bug: 19029490
Change-Id: I6222edcab8e394e5fb6adf7a982be446e4505a1e
(cherry picked from commit 3bfe51d790)
Fix potential buffer overflow error in getFormat with indices
greater than MAX_HWC_DISPLAYS.
Change-Id: I5e5b69d8d043e900f5e33ca9a62e94ae5f857b68
(cherry picked from commit 4e3e30c2d5)
In cases where SurfaceFlinger is applying a color matrix (usually for
accessibility features), we previously would perform a render-to-
texture for the initial composition, and then apply the matrix during
a copy to the framebuffer. This changes that behavior to just apply the
matrix during composition without a render-to-texture pass.
This may result in a perceived change of the image in cases with alpha
blending, since the blending is performed at a different stage of the
pipeline and the system effectively performs non-linear blends.
However, neither this nor the prior render-to-texture pass is strictly
correct in that regard, and this approach is less error-prone and
likely faster.
Change-Id: I2110ff0374f61d76df7b087dde8a1ed98990440c
(cherry picked from commit f008799d37)
When the primary is connected/disconnected on tv devices HWComposer updates
it's display parameters but doesn't destroy or recreate the display.
Bug: 18698244
Change-Id: I759c8f75d3e3a7462b85eb51973fb5072b71a702
(cherry picked from commit 10613dc3b5)
Flips the width and height when the buffer comes in with a 90 degree
rotation so that performing the Y-flip from GL works correctly.
Bug: 20761426
Change-Id: I41c9edc8549c6cbdb534277b996ff20c59034582
(cherry picked from commit 0e65e6c283)
Update IGraphicsBufferProducerTest to the new maximum enum value which is now
NATIVE_WINDOW_BUFFER_AGE. Update SurfaceTextureGLToGL_test to use the correct
counts for GraphicsBuffer refs.
Buf: 18138368
Change-Id: Ie2f7e00b414d63100b16944e3ab36b1ffceecd57
(cherry picked from commit d8ead0ccd4)
