* Add a new binder transaction for applying a secondary color matrix
using RenderEngine. This stacks with the primary color matrix
(if set for a11y) to enable GPU-based display calibration.
Change-Id: I766455bfb5212e2dcc8ad0cb8ebdddbda87af732
Increase frame buffer surface buffers to 3. Call allocateBuffers
from the producer so that buffers are allocated. With out this,
BufferQueue implementation will only allocate 1 buffer
CRs-Fixed: 930504
@Buganizer: 26778657
Change-Id: Id0cadeb78957273d670d63f9956a09454b45eb69
- Collect dumpsys to an outfile file when triggered.
- Collect dumpsys before calling Prepare on hwc module in
each draw cycle. Recollect dumpsys if Commit goes through
successfully and replace former dumpsys with this.
- Wrap around if file size reaches appx 20 MB.
- Generate output file at /data/misc/display/dumpsys.txt
- Syntax:
adb shell dumpsys SurfaceFlinger --file [--no-limit]
--file : Ouput dumpsys to file
--no-limit : Do not wrap around, keep appending
Use same command to trigger start and end of dumping.
- Output format:
| start code | after commit? | time stamp | dump size | dump data |
CRs-Fixed: 947084
Change-Id: Ie520f51c69757aeec88b9400688a7f3271472349
- When rotation animation is disabled on secondary displays, remove
the screenshot surface from the secondary display list, without
this it would show up upside down frame on secondary.
- Mark IntOnly layers as invisible on secondary displays.
Change-Id: Ia859ee1c6ac7caa132c95e4f906bd2589e786fac
Crs-fixed: 949263
SurfaceFlinger uses two event-threads to support phase-offsets
for application and SurfaceFlinger itself. Extra thread may
cause scheduling issues and wake-up latency for either
SurfaceFlinger or Application, depending on scheduling, even
when running at higher priority as these threads have low-load
and qualify for task-packing.
Use single event-thread when phase offsets are same.
Debug runtime service call behavior change when same phase-offset:
1018 (set phase offset for Application): will change both
Application and SurfaceFlinger phase offsets.
1019 (set phase offset for SurfaceFlinger): Will be a no-op.
Change-Id: I2514b4ff6249e9bce3eb19f60b1dfe0de12b86d9
* QC media encoder appears to be incapable of switching between RGBA8888
buffers and NV12_ENCODEABLE dynamically. This requires that we switch
the entire stack to use the QC opaque format, or RGBA8888.
REF: CRACKLING-938
Change-Id: Ibd6a8faf8d268d3bfb4d61e4118a778ed82f1ab5
This allows us to pass in the path to the target apk as an additional
included resource apk, allowing theme designers to reference styles
and attributes from the original package without needing to duplicate
them. Duplicating attributes never worked quite well, and causes
all sorts of issues, including crashing apps.
Instead of a theme declaring attributes, that are app specific, it
simply reference the originals. This way things like colors that
are style specific get included correctly.
Here's an example of stat_sys_wifi_signal_4_fully.xml using this feature.
By using ?com.android.systemui:attr/ we are able to reference attributes
defined in SystemUI directly in our themed resource.
<vector xmlns:android="http://schemas.android.com/apk/res/android"
android:width="17.25dp"
android:height="18dp"
android:viewportWidth="46.0"
android:viewportHeight="48.0">
<path
android:fillColor="?com.android.systemui:attr/backgroundColor"
android:pathData="M20.4,18.0"/>
<path
android:fillColor="?com.android.systemui:attr/fillColor"
android:pathData="M42.0,32.0l0.0,-4.0L26.0,18.0L26.0,7.0c0.0,-1.7 -1.3,-3.0 -3.0,
-3.0c-1.7,0.0 -3.0,1.3 -3.0,3.0l0.0,11.0L4.0,28.0l0.0,4.0l16.0,-5.0l0.0,11.0l-4.0,
3.0l0.0,3.0l7.0,-2.0l7.0,2.0l0.0,-3.0l-4.0,-3.0L26.0,27.0L42.0,32.0z"/>
</vector>
Change-Id: Ic00b5d91fc651a29a8c3ab341e5494107acd0463
TICKET: CYNGNOS-1645
-1/+1 somewhat simplifies the values that can be generated by rotary
encoders, and rules out the possibility of batching and more nuanced
movement reporting.
So, we modify the device configuration to allow values other than -1 and
1 to be supported. In order to give the developer a sense of what these
values map to in terms of angular displacement, we also parse a
resolution configuration from the devices IDC file.
This will be specified as:
device.res = xxxx
of type float. If a value is not provided, a default res value of 0.0f
is used.
This patch also adds a per device scaling factor, which is used to
suitably modify the values reported (as well as the resolution) to tune
the input events generated and resulting UI according to the hardware.
This can be specified in the IDC file as:
device.scalingFactor = xxxx
of type float. If a scaling factor is not provided, a default of 1.0f
is used.
Bug: 22836852
Bug: 18707397
Change-Id: I13686f64de1b52d3f6c97b2587ae41e52d1db6e2
Move the ExSurfaceFlinger, ExLayer, etc., classes to this
repository, to avoid dependency accross projects with static
linking
The following commits are included in this:
commit 04f501b31f627e47ae540b5160b2f86b7adbd921
Author: Baldev Sahu <bsahu@codeaurora.org>
Date: Wed Nov 25 18:05:51 2015 +0530
display-fw: Properly initialise mIsGPUAllowedForProtected flag
- This flag need to be initialize to false when layer is
created.
Change-Id: Ie3df40ffc4240c33883f19ecbef6428f7c539b07
CRs-fixed: 942102
commit 09032188751356db295bc5467133ec484dc536cd
Author: Arun Kumar K.R <akumarkr@codeaurora.org>
Date: Tue Oct 20 10:22:51 2015 -0700
display-fw: Enable checking for INTERNAL_ONLY private flag
Check for INTERNAL_ONLY private flag and return correct values
from the function isIntOnly
Change-Id: I61b44f636412e0ad93e1b3ff18e4accdf90eeafe
CRs-fixed: 927880
commit f687ac25b3482b92da3c252d29b65e850cca3ce1
Author: Arun Kumar K.R <akumarkr@codeaurora.org>
Date: Thu Oct 15 16:37:11 2015 -0700
display-frameworks: Include libqdutils
only for target builds
Featurize including libqdutils for targets which uses QCOM_BSP,
helps in resolving compilation for emulator builds
Change-Id: I39639c3100eb20dd24d2a875bb0e9bc82d2b2d1f
commit 4ec765e01be506a8083980fc746a1737bbac4bf2
Author: Arun Kumar K.R <akumarkr@codeaurora.org>
Date: Wed Oct 7 18:33:34 2015 -0700
display-fw: Disable rotation animation on secondary displays
- Set the animating flag on layer during animation which is used
as hint to disable rotation animation on secondary displays.
- Set sys.disable_ext_animation to enable the feature
- Remove unused definitions in the extended hwc header
Change-Id: I7b72c7b605930ea189e047fec17ed18b17d46fdf
CRs-fixed: 922304
commit 6998bbdfd7af3126b64897b16b6961e84952601b
Author: Baldev Sahu <bsahu@codeaurora.org>
Date: Thu Jul 30 16:01:15 2015 +0530
display-frameworks: Extend support for MDP3
- Add support for HWC_BLIT
- Allow GPU to compose widevine level 3
Change-Id:I11e03ccd0842d019e85d0c29bc5b7be559fccbaa
commit 2fa7aa1684c0162b8226c4327c86c6eaf6b76101
Author: Manoj Kumar <manoj@codeaurora.org>
Date: Thu Aug 20 13:52:15 2015 -0700
display-frameworks: Override mOutputUsage with sink Usage flags
mOutputUsage flags contain default usage flags and doesnt reflect
sink usage flags. Override mOutputUsage with sink usage flags.
This change is needed to support WFD Secure usecase.
Change-Id: I14d8812049f635a8ebe6a944783e0ec7f8f80b1f
commit 09da768794c8c6acd786d73239ed5a739695b8cb
Author: Raj Kamal <rkamal@codeaurora.org>
Date: Mon Jul 20 10:46:27 2015 +0530
display-frameworks: Extend the classes defined in SF
Add support for custom classes ExSurfaceFlinger,
ExLayer, ExHWComposer and ExVirtualDisplaySurface
Change-Id: Iab8c4835faaad9b436bbd34d38702741eb0cf12d
Change-Id: Ie400c94ccc77fc379ffa256af03a9e42ba5decaa
This error can be seen for the following use case
1. Connect HDMI display
2. Dump the SurfaceFlinger state
The problem here is that HWComposer would have processed the display
connection event via the hotplug mechanism and considers that the
external display is connected. However, SurfaceFlinger has not
updated its internal state (mDisplays) since it will be waiting for
the mStateLock to be release by the dump function. As a result, when
the dump function invokes the getLayerSortedByZForHwcDisplay for the
external display, we will end up seeing the error log message because
SurfaceFlingers internal state has not yet been updated.
We can move this to ALOGW since it is a non-fatal/recoverable state.
CRs-Fixed: 914173
Change-Id: Ib0ba359ecd894dd463417ba57ba1f72c07b5833e
Khalid Zubair