This change is porting of following commits related to MDP3
1) SurfaceFlinger: Change to support framebuffer flip for 2D blitters
- Surfaceflinger does not flip framebuffers when there are
no layers marked for HWC_FRAMEBUFFER
- This change checks for the HWC_BLIT flag and will request a flip
to a new FB_TARGET buffer even if there are no FRAMEBUFFER layers
"Change-Id: I1cb44389a05c9ec049d7f0d39c288feccb11a91c"
2) SF: Avoid wormhole clear for BLIT calls
- Do not call GPU clear from SF when composition
type is BLIT as it'll be taken care in HAL.
"Change-Id: Ia613eb9b824c6484ecc8c8fa4ee883545d8541b8"
3) surfaceflinger: Allow gpu to render widevine level3
- Allow gpu to render widevine level3 but keep
blocking screen shots.
"Change-Id: I914232a062acbb7b17901dbf2b414973230e59d9"
Change-Id: I35eef9eb1597af21c195e07d5fe4c0c73ab3a269
Avoid disabling DispSync resync if app and SF events aren't
using phase offsets. This prevents hardware VSYNC from turning
on always whenever something needs to be drawn, thereby
bringing down the power numbers.
Change-Id: I83c8f79eb46b9fdaa730ec32767ebed3286347b8
- Set dim layer flag = 0x80000000 to send dim layer hint to HWC.
- Clear HWC_SKIP_LAYER flag when dim layer flag is set.
Change-Id: I56904c65fb487e6e89d4c057015443730d727299
Inside Surface::lock if new buffer is allocated
and DirtyRegion does not cover complete buffer
bounds then copyback may not cover all remaining area
as it copyback only area covered by dirty regions
from other buffers. This will lead to left out
black area which may cause flicker.
Change-Id: I4a3f7a56fc5fbaf4af926584919577d8d34bed57
Copyback dirty region logic does copyback,
even when its not necessary causing 2ms delay.
Fix the logic to copy back only what is necessary
CRs-fixed: 562334
Change-Id: I52de68258ac9f87d704ee5401f93417805fa6773
Author: Prabhanjan Kandula<pkandula@codeaurora.org>
SF: Add support for inverse mounted panels.
Add 180 rotation in SF to account for inverse mounted panels.
The framework will be unaffected and use policies for a 0 mounted
panel. SF changes the global transform and silently induces the H,V
flips. Similar flips are added to screenshots as well.
CRs-Fixed: 894147
Change-Id: I6e9576ee734ee85097491eaa1e8e94cfb3731e0f
Author: Ramkumar Radhakrishnan<ramkumar@codeaurora.org>
SF: Clear visible region of layer appropriately.
Clear visible region of layer having layer stack id different than
the display layer stack id to ensure that the layer won't be present
on the wrong display layer list.
Change-Id: I59289fea63ec7a2451d4715cfe7926ba34fdb8e3
Change-Id: I5ad08a6013aa173d621ee80c766a6e19e1086a35
Add definition of Tertiary display into the enumeration list of
surface composer header file, to support third display for all
Surface Flinger APIs.
Change-Id: Ic932be4f7f1ac9c44a5a8f36d17eb9386135de87
Add DisplayUtils class which uses the custom implementations
of ExLayer, ExSurfaceFlinger, ExHWComposer,
and ExVirtualDisplaySurface classes if needed
Change-Id: Ibdd8da5d3d0d602f42b76a15d0994c6aa98bee3f
This includes the following two changes squashed into one and
retaining the change I182f41edbaf9226fc62d6d17ee964998cd9f21f7
sf: Fixes for resolution change in SurfaceFlinger
1. Use active config from HWC when querying display attributes
When we query the display attributes we should use the active
config as reported by HWC in cases where HWC version is 1.4.
In all other cases we should revert to the default config,
config 0, as the active config.
2. Set/update the display config if HWC config change was successful
The new config should only be applied if HWC succeeded in changing
the active config. This would otherwise cause failure or undefined
behavior if the client sets an invalid/unsupported display config.
3. Set the active config at display creation time
When a new display device is added update the active config by
querying HWC.
Change-Id: I182f41edbaf9226fc62d6d17ee964998cd9f21f7
sf: Initialize active config for non-virtual displays at boot time
When a non-virtual display device is added at boot time, update the
active config by querying HWC otherwise the default config (config 0)
will be used.
Change-Id: I90f42fa1d20ed6176c4be464a10ae69a2f6a6d55
Change-Id: I182f41edbaf9226fc62d6d17ee964998cd9f21f7
In very low framerate situations, extrapolation is generally going to
either cause no benefit or make a mistake. We can safely turn it off
with no user-visible negative impact.
BUG=https://buganizer.corp.google.com/u/0/issues/24550942
TEST=Scrolled very slowly and saw mispredictions on Angler. With change,
saw the log message that the mispredictions were suppressed.
Change-Id: Ic9747d3ff098d7918047ada2ed1c2d21282c65b0
Add handling of "replacement" key events in InputReader and EventHub by
consulting device's character key map (if exists) for presence of
replacement key code for given get code and meta state combination,
before passing it to InputDispatcher.
This enables defining special keys, such as ESC, on keyboards lacking
enough physical keys, via combination of normal keys and modifiers, for
example AltR + 1 => ESC.
Bug: 24504154
Change-Id: I7e36104808bedcf724436c1fbb63d37c35cca8af
Currently keyboard maps allow to assign character sequences to key
events and allow specifying a so-called "fallback" key events that are
re-injected into input stream if target application indicates that it
was not able to handle the original key event. Unfortunately there is no
way to perform substitution before handing the event to applicationis.
This change adds a new keymap keyword "replace" that allows users query
"replacement" actions for key (if any), with the intent that such
replacement happens early in the event handling process.
Bug: 24504154
Change-Id: I3e6a2476c856524171df00ad22ff56f2018c1278
The uninitialized local variables pick up
whatever the memory content was there on stack.
This data gets sent to the remote process in
case of a failed transaction, which is a security
issue. Fixed.
(Partial manual merge of master change
12ba0f57d028a9c8f4eb3afddc326b70677d1e0c. Rest
to automerge from klp-dev)
For b/23696300
Change-Id: I704c9fab327b3545c58e8a9a96ac542eb7469c2a
Do not fall back to dalvik.vm.dex2oat-threads if
dalvik.vm.boot-dex2oat-threads is not set. Also do not ever use
the value of dalvik.vm.image-dex2oat-threads. Instead use the
default behavior of dex2oat in that situation.
(cherry picked from commit 919461cbeef3e9f35388fc099a5fcdae1cb79cc6)
Bug: 24413760
Change-Id: I42e60996341414b95b8df2d243d5e07f7f5ff9b6
* commit 'cff01363fcbdae5486287540e1f8917244aaea90':
DO NOT MERGE Revert "am f37143d8: Merge "Cancel touches as well as pointer gestures." into mnc-dev"
The uninitialized local variables pick up
whatever the memory content was there on stack.
This data gets sent to the remote process in
case of a failed transaction, which is a security
issue. Fixed.
(Partial manual merge of master change
12ba0f57d028a9c8f4eb3afddc326b70677d1e0c. Rest
to automerge from klp-dev)
For b/23696300
Change-Id: I704c9fab327b3545c58e8a9a96ac542eb7469c2a
