- Check if display id is within display ID range. Negative
display ids lead to undefined behavior in CTS tests.
Change-Id: I2db8caf8d7ac65700e5bc37c180763357cc90aad
CRs-Fixed: 1043297
The stylus eraser appeared not to work, i.e. Android did not respond to
input from the eraser. It turned out that all input except stylus input
is rejected when palm rejection is activated. The problem was that the
eraser itself activates palm rejection when it hovers. The solution is
to allow the eraser during palm rejection. This solution makes sense
because the eraser input works in the exact same way as normal stylus
input.
Change-Id: I9c7451112ce7dbca14a1e1694eedca2d4ed041a1
* If QCOM WFD isn't in use, we'll get -1 here. Don't try and
dig into the array because we'll get some random memory back.
Change-Id: Ib14642fea760dc0e659473bb183c5e0116622302
Pop buffer item from shadow queue only when
number of queued buffer items is greater than zero.
Change-Id: I039bc133842293c29e3e130efd65f521ef0049c6
CRs-Fixed: 1009466
Allow HWC composition of virtual displays for HDMI primary only
when the output pixel format of the HDMI display is RGB.
CRs-Fixed: 1007249
Change-Id: I9680b162d844e9e6397f919e8dcc1b1a948d182c
Add support to draw S3D framebuffer target in case HWC driver
can not handle due to resource or capability issue.
Change-Id: I536fa4a03e246d51891045b692d5dc5be88f2adf
CRs-fixed: 999055
Add support for all flips of panel mount, H, V, HV (180). Property
persist.panel.mountflip can be set to 1 for H-Flip, 2 for V-Flip,
3 for HV-Flip (180 / inverse mount).
Change-Id: Ide7b8378ad6a423e5d7335fedc27d480a25b53ae
CRs-fixed: 990622
Pass the reference time to DispSyncThread. Since the phase offset is calculated
using timestamps relative to the reference time, we must also adjust the phase
offset by the same reference time when computing the next refresh time.
Always reset phase offset to zero when updating the reference time because the
reference time equals the first timestamp.
After beginResync() we need to keep HW vsync enabled until the model is updated.
Bug: 25113115
Change-Id: I8eae227bee91c24a99bf8e57fbebceb98d29c77d
Test: check in systrace that app/sf vsync events have correct phase
Do not use the absolute 64-bit nsecs_t timestamp directly in phase
and error calculations. Compared to the estimated vsync period, the
timestamp tend to many orders of magnitudes larger, and consequently
the integer modulo operation used to calculate phase and error can
be very sensitive to tiny fluctuation in vsync period.
Bug: 25113115
Test: set kTraceDetailedInfo=true; see Phase and Error are stable in systrace
Change-Id: I687703eec31b1072c606898c0424a96c0a8ca033
* After 0c5f3af, glitches when blending is observed on
A family devices. Modify ifdef to not include QCOM_BSP_LEGACY.
Change-Id: Ibb53df5709abbb0e7132065aec23a14f7accf4b3
Before configuring the layers to HWC, make sure
HWC_BLENDING_NONE is set if the layer is opaque
Change-Id: Ie84aa9d93e98a244692a0cffc2de653a9079f8b4
Crs-fixed: 957373
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAldVtQ8ACgkQ6K0/gZqxDnhIVgCfWRMpjlr3RQ8yoizXrd1JT2e8
M6kAn2lFAPOBl7D6M28oTaPBQpLrZMdF
=kdz+
-----END PGP SIGNATURE-----
Merge tag 'android-6.0.1_r46' into HEAD
Android 6.0.1 release 46
# gpg: Signature made Mon 06 Jun 2016 10:38:23 AM PDT using DSA key ID 9AB10E78
# gpg: Can't check signature: public key not found
If a single transaction has both positional and size changes, ensure we don't draw
any frames using the incorrect buffer size using the updated position. Wait for the correct
buffer size and then proceed.
Change-Id: I8e25f21f17e0936e66bb5053f85f8336c8464c7b
Due to more complex window layouts resulting in lots of overlapping
windows, the policy around FLAG_WINDOW_IS_OBSCURED has changed to
only be set when the point at which the window was touched is
obscured. Unfortunately, this doesn't prevent tapjacking attacks that
overlay the dialog's text, making a potentially dangerous operation
seem innocuous. To avoid this on particularly sensitive dialogs,
introduce a new flag that really does tell you when your window is
being even partially overlapped.
We aren't exposing this as API since we plan on making the original
flag more robust. This is really a workaround for system dialogs
since we generally know their layout and screen position, and that
they're unlikely to be overlapped by other applications.
Bug: 26677796
Change-Id: I9e336afe90f262ba22015876769a9c510048fd47
* Add a new binder transaction for applying a secondary color matrix
using RenderEngine. This stacks with the primary color matrix
(if set for a11y) to enable GPU-based display calibration.
Change-Id: I766455bfb5212e2dcc8ad0cb8ebdddbda87af732
Increase frame buffer surface buffers to 3. Call allocateBuffers
from the producer so that buffers are allocated. With out this,
BufferQueue implementation will only allocate 1 buffer
CRs-Fixed: 930504
@Buganizer: 26778657
Change-Id: Id0cadeb78957273d670d63f9956a09454b45eb69
- Collect dumpsys to an outfile file when triggered.
- Collect dumpsys before calling Prepare on hwc module in
each draw cycle. Recollect dumpsys if Commit goes through
successfully and replace former dumpsys with this.
- Wrap around if file size reaches appx 20 MB.
- Generate output file at /data/misc/display/dumpsys.txt
- Syntax:
adb shell dumpsys SurfaceFlinger --file [--no-limit]
--file : Ouput dumpsys to file
--no-limit : Do not wrap around, keep appending
Use same command to trigger start and end of dumping.
- Output format:
| start code | after commit? | time stamp | dump size | dump data |
CRs-Fixed: 947084
Change-Id: Ie520f51c69757aeec88b9400688a7f3271472349
- When rotation animation is disabled on secondary displays, remove
the screenshot surface from the secondary display list, without
this it would show up upside down frame on secondary.
- Mark IntOnly layers as invisible on secondary displays.
Change-Id: Ia859ee1c6ac7caa132c95e4f906bd2589e786fac
Crs-fixed: 949263
SurfaceFlinger uses two event-threads to support phase-offsets
for application and SurfaceFlinger itself. Extra thread may
cause scheduling issues and wake-up latency for either
SurfaceFlinger or Application, depending on scheduling, even
when running at higher priority as these threads have low-load
and qualify for task-packing.
Use single event-thread when phase offsets are same.
Debug runtime service call behavior change when same phase-offset:
1018 (set phase offset for Application): will change both
Application and SurfaceFlinger phase offsets.
1019 (set phase offset for SurfaceFlinger): Will be a no-op.
Change-Id: I2514b4ff6249e9bce3eb19f60b1dfe0de12b86d9
* QC media encoder appears to be incapable of switching between RGBA8888
buffers and NV12_ENCODEABLE dynamically. This requires that we switch
the entire stack to use the QC opaque format, or RGBA8888.
REF: CRACKLING-938
Change-Id: Ibd6a8faf8d268d3bfb4d61e4118a778ed82f1ab5
-1/+1 somewhat simplifies the values that can be generated by rotary
encoders, and rules out the possibility of batching and more nuanced
movement reporting.
So, we modify the device configuration to allow values other than -1 and
1 to be supported. In order to give the developer a sense of what these
values map to in terms of angular displacement, we also parse a
resolution configuration from the devices IDC file.
This will be specified as:
device.res = xxxx
of type float. If a value is not provided, a default res value of 0.0f
is used.
This patch also adds a per device scaling factor, which is used to
suitably modify the values reported (as well as the resolution) to tune
the input events generated and resulting UI according to the hardware.
This can be specified in the IDC file as:
device.scalingFactor = xxxx
of type float. If a scaling factor is not provided, a default of 1.0f
is used.
Bug: 22836852
Bug: 18707397
Change-Id: I13686f64de1b52d3f6c97b2587ae41e52d1db6e2
Move the ExSurfaceFlinger, ExLayer, etc., classes to this
repository, to avoid dependency accross projects with static
linking
The following commits are included in this:
commit 04f501b31f627e47ae540b5160b2f86b7adbd921
Author: Baldev Sahu <bsahu@codeaurora.org>
Date: Wed Nov 25 18:05:51 2015 +0530
display-fw: Properly initialise mIsGPUAllowedForProtected flag
- This flag need to be initialize to false when layer is
created.
Change-Id: Ie3df40ffc4240c33883f19ecbef6428f7c539b07
CRs-fixed: 942102
commit 09032188751356db295bc5467133ec484dc536cd
Author: Arun Kumar K.R <akumarkr@codeaurora.org>
Date: Tue Oct 20 10:22:51 2015 -0700
display-fw: Enable checking for INTERNAL_ONLY private flag
Check for INTERNAL_ONLY private flag and return correct values
from the function isIntOnly
Change-Id: I61b44f636412e0ad93e1b3ff18e4accdf90eeafe
CRs-fixed: 927880
commit f687ac25b3482b92da3c252d29b65e850cca3ce1
Author: Arun Kumar K.R <akumarkr@codeaurora.org>
Date: Thu Oct 15 16:37:11 2015 -0700
display-frameworks: Include libqdutils
only for target builds
Featurize including libqdutils for targets which uses QCOM_BSP,
helps in resolving compilation for emulator builds
Change-Id: I39639c3100eb20dd24d2a875bb0e9bc82d2b2d1f
commit 4ec765e01be506a8083980fc746a1737bbac4bf2
Author: Arun Kumar K.R <akumarkr@codeaurora.org>
Date: Wed Oct 7 18:33:34 2015 -0700
display-fw: Disable rotation animation on secondary displays
- Set the animating flag on layer during animation which is used
as hint to disable rotation animation on secondary displays.
- Set sys.disable_ext_animation to enable the feature
- Remove unused definitions in the extended hwc header
Change-Id: I7b72c7b605930ea189e047fec17ed18b17d46fdf
CRs-fixed: 922304
commit 6998bbdfd7af3126b64897b16b6961e84952601b
Author: Baldev Sahu <bsahu@codeaurora.org>
Date: Thu Jul 30 16:01:15 2015 +0530
display-frameworks: Extend support for MDP3
- Add support for HWC_BLIT
- Allow GPU to compose widevine level 3
Change-Id:I11e03ccd0842d019e85d0c29bc5b7be559fccbaa
commit 2fa7aa1684c0162b8226c4327c86c6eaf6b76101
Author: Manoj Kumar <manoj@codeaurora.org>
Date: Thu Aug 20 13:52:15 2015 -0700
display-frameworks: Override mOutputUsage with sink Usage flags
mOutputUsage flags contain default usage flags and doesnt reflect
sink usage flags. Override mOutputUsage with sink usage flags.
This change is needed to support WFD Secure usecase.
Change-Id: I14d8812049f635a8ebe6a944783e0ec7f8f80b1f
commit 09da768794c8c6acd786d73239ed5a739695b8cb
Author: Raj Kamal <rkamal@codeaurora.org>
Date: Mon Jul 20 10:46:27 2015 +0530
display-frameworks: Extend the classes defined in SF
Add support for custom classes ExSurfaceFlinger,
ExLayer, ExHWComposer and ExVirtualDisplaySurface
Change-Id: Iab8c4835faaad9b436bbd34d38702741eb0cf12d
Change-Id: Ie400c94ccc77fc379ffa256af03a9e42ba5decaa
This error can be seen for the following use case
1. Connect HDMI display
2. Dump the SurfaceFlinger state
The problem here is that HWComposer would have processed the display
connection event via the hotplug mechanism and considers that the
external display is connected. However, SurfaceFlinger has not
updated its internal state (mDisplays) since it will be waiting for
the mStateLock to be release by the dump function. As a result, when
the dump function invokes the getLayerSortedByZForHwcDisplay for the
external display, we will end up seeing the error log message because
SurfaceFlingers internal state has not yet been updated.
We can move this to ALOGW since it is a non-fatal/recoverable state.
CRs-Fixed: 914173
Change-Id: Ib0ba359ecd894dd463417ba57ba1f72c07b5833e
Reduce transparent region from a layer only if the transparent
region has valid intersection with the layer. Otherwise, reducing
a transparent region lying completely outside of the layer leads to
invalid sourcecrop values for the layer.
Change-Id: Iee9ba53a8072c21c9ba8a6d58cb14ca30f8600ba
CRs-Fixed: 620973
Compute crop and display frame for GPU composition also
in the same way it's done for HWC and compute vertices
and texture coordinates for GPU composition. This avoids
pixel shifts in output of GPU composition & overlays.
Change-Id: I0d31b1e4a81049fff72109d1a210e7cbd945cfe9
[root cause ] framebuffer surface is in the same process of surface flinger
[changes ] call IGraphicBufferProducer::allocateBuffers on producer inside the DisplayDevice constructor to force-allocate all three buffers.
[side effects] none
[self test ]<tshark, enter and exit mainmenu>: ok
[reviewers ] zhongjun.chen
[change_type ] AOB --> google_original
[tag_product ] common
Change-Id: Ideb75d3aa1ed23b2fa4d263a120ea3ca39d01361
This change is porting of below commits related to MDP3
In MDP3 we are using the widevine level3 for secure content
display. And this should applicable only for primary display
not for screen shot or screen recording
- CRs-Fixed: 595469
- Change-Id: I99be2d81287ab746d5c4a2375c3106c59e61a8fc
Change-Id: Ie7ac95e1c03eb7ad6f71098ecf09a1e25e69760f
