On one device there is a bug, not yet root-caused, that causes fence
fds to not make it across binder from producer to consumer in the
IGraphicBufferProducer::queueBuffer call. Rather than returning an
error, which the producer typically treats as a fatal error, this
change allows the buffer to be queued with no fence. This avoids an
application crash at the risk of (likely single-frame) visible
corruption.
Bug: 17946343
Change-Id: I9ca89f94098c455e1e90f5f58d5336c936b04a9c
Previously it was possible to have the driver's eglTerminate called beofre
eglDestroyImageKHR in GLConsumer. This was because we didn't increment the
refcount for the lifetime of the image. This could lead to a crash or a deadlock
when multiple threads called terminate and destroy simultaneously.
Bug: 17700483
Change-Id: I7010d0f1b3db875332e95630b5e098a5564ba755
Throttling was previously controlled by a combination of the
driver and the number of buffers in the queue. This patch makes
a more consistent trade-off, which allows two GPU frames pending
but not three. More buffering could improve throughput in the
case of varying frame times, but this also increases latency.
Bug: 17502897
Change-Id: I4ee68019ca94c635294c5959931a555a6c4ef2df
i) Call removeFd() only if the fd in the BitTube has been
previously added to the Looper. Use a flag to determine whether the fd
has been previously added or not.
ii) Increment mPendingFlushEventsToSend after holding a connectionLock.
iii) Store the number of acks that are pending in SensorEventQueue
and send them all at once.
Bug: 17472228
Change-Id: I1ec834fea1112a9cfbd9cddd2198438793698502
This is used by media service to schedule video frames at the
proper time, based on precise vsync timings.
Bug: 14659809
Change-Id: I1a90603f3dc09dca9aa4f90a3aa845fab56e0a5e
i) Significant Motion multiple clients fix. Make a copy of
mActiveConnections vector before cleaning up SensorEventConnections
when one-shot sensors trigger.
ii) Maintain a mapping between flush_complete_events and
SensorEventConnections to accurately map flush() API calls and
corresponding flush_complete_events
iii) Remove all references to 1_1 and 1_2 HALs.
iv) Dynamically allocate sensor_event buffers in SensorService main
threadLoop.
Bug: 17412359
Change-Id: If3c3986197660cafef2d2e0b4dc7582e229cf1c4
+ This is needed so that activity manager does not
have to do cpu side rotations when capturing recents
thumbnails.
Change-Id: If998008e675ad01305db8399fd643cf4608b7025
If a display is terminated and then initialized, we can't detect
this using the display itself (it has the same value), but all
EglImages still become invalid for the display. This patch detects
this during image binding and forces creation of a new EglImage.
Bug: 10430249
Change-Id: I75101c50962f21263dca3ec6e241a2e5a3c23dad
Modify SurfaceFlinger to use VirtualDisplaySurface in all cases when a virtual
display is used. Add functionality in VirtualDisplaySurface to resize the
buffers aquired in the QueueBufferOutput. Add transaction support in
SurfaceFlinger for resize. Add the modification of the size in DisplayDevice.
Change-Id: Iae7e3556dc06fd18d470adbbd76f7255f6e6dd6b
Tested: None
Commit 78014f32da introduced a bug that
made us pre-allocate buffers into the last available free slots instead
of the first available ones. This in turn caused more re-allocations,
and possibly triggered driver bugs.
Change-Id: Ic4a70e676b4f2bbb054bc873be62ced26e3099a0
i) Send ack for wake_up sensors on the socket connection instead of using Binder RPC.
ii) Cache events per connection in case there are write failures. Compute cache size
from FIFO counts of sensors.
iii) Send FlushCompleteEvent only for apps that explicitly called flush().
Change-Id: I018969736b7794b1b930529586f2294a03ee8667
BufferQueueProducer::allocateBuffers used to keep the BufferQueueCore
mutex while doing the buffer allocation, which would cause the consumer
(which also needs the mutex) to block if the allocation takes a long
time.
Instead, release the mutex while doing the allocation, and grab it again
before filling the slots. Keep a bool state and a condvar to prevent
other producers from trying to allocate the slots while the mutex is
released.
Bug: 11792166
Change-Id: I4ab1319995ef892be2beba892f1fdbf50ce0416d
(cherry picked from commit ea96044470)
In most cases, EGLImages can be created one-to-one with graphic
buffers in slots, but that was difficult due to some special
cases:
- ReleaseTexImage binds a custom 'unslotted' debug image.
- When all slots are freed, we still need to hang on to one.
These cases were handled by keeping an additional reference to
the 'current' buffer (mCurrentTextureBuf), but we would create
new images since we can't reference count them in the same way.
This patch uses the same semantics, except that it reference
counts the image (an EglImage wrapper class) rather than just
buffer. The wrapper class also detects the cases when we need
a new EGLImage, and only creates them in those rare cases.
Change-Id: I2915761dbe49d2a9bda1f59e60f857543634636b
Bug: 15116722
- Adds a sticky transform field that can be set from a
SurfaceFlinger client Surface. This transform is
added to any transform applied to the Surface.
Change-Id: Idaa4311dfd027b2d2b8ea5e2c6cba2da5779d753
Adds a constructor that doesn't require a GLES texture name and sets
up the GLConsumer in detached mode.
Bug: 15616428
Change-Id: Idc9ea2e59baa24bbd959da9fffe0fb71c0aa9818
Removes the dependency on default constructor parameters for
GLConsumer so that a different constructor prototype can safely be
added.
Change-Id: I0da924bbd4c141edbf305598c1be8bc575654680
This adds an allocateBuffers method to BufferQueue, which instructs
it to allocate up to the maximum number of buffers allowed by the
current configuration. The goal is that this method can be called
ahead of render time, which will prevent dequeueBuffers from blocking
in allocation and inducing jank.
This interface is also plumbed up to the native Surface (and, in
another change, up to the Java Surface and ThreadedRenderer).
Bug: 11792166
Change-Id: I4aa96b4351ea1c95ed5db228ca3ef98303229c74
We replace the blank/unblank calls in surfaceFlinger with a more generic
setPowerMode() routine.
Some displays support different power modes (for example, with reduced
color palettes). Depending on the use case we should be able to toggle
these modes, so as to achieve incremental power savings.
Initially, three power modes will be supported:
- HWC_POWER_MODE_OFF
- HWC_POWER_MODE_DOZE
- HWC_POWER_MODE_NORMAL
HWC_POWER_MODE_OFF will correspond to blanking the display, while
HWC_POWER_MODE_NORMAL will correspond to unblanking. HWC_POWER_MODE_DOZE
will put the display into a low power setting, if it is supported in
hardware.
If such a low power mode is not supported, it should be treated as a
call to set the mode to HWC_POWER_MODE_NORMAL.
As a consequence of adding the mPowerMode field, the mScreenAcquired is
no longer required, and thus references to it are removed and replaced
equivalent references to mPowerMode.
We also add the glue code to connect the services invocation of setting
a power mode and the HAL implementation in HWComposer.
Bug: 13472578
Change-Id: I431595ecf16d2f2c94259272db3dd42f29636204
Signed-off-by: Prashant Malani <pmalani@google.com>
Write string lengths as uint32_t so that their width is
the same on 32 and 64 bit processes.
Note that this fixes another bug as a side effect; getFlattenedSize
was assuming that sizeof(uint32_t) == sizeof(size_t).
Change-Id: I7b6e3993e1f1ac45c14832ce59c59e0772855a2f
Adds a sourceCrop Rect parameter to screenshot commands, which allows
clients to capture only a portion of the screen instead of the whole
screen.
Bug: 15137922
Change-Id: I629447573cd34ffb96334cde7ba02490b9ea06d8
