Commit Graph

136 Commits

Author SHA1 Message Date
Mathias Agopian
963abad79a fix some aspects of [2258746] native crash in launcher2
Surface::validate() could sometimes dereference a null pointer before checking it wasn't null.
This will prevent the application to crash when given bad parameters or used incorrectly.
However, the bug above probably has another cause.
2009-11-13 15:26:29 -08:00
Romain Guy
092fa4beaf Revert change incorrectly submitted as part of change #32153.
Change-Id: I31c52beff03c0d038a257fc151eff3b8da60eddc
2009-11-05 15:49:22 -08:00
Romain Guy
471afca7fc Prevent crash in Home when using widgets whose ids collide with Home's
resources.

Bug #2228943.

Approved by mcleron, triaged by ryanpc.

Change-Id: Idf40f3b09502ae5d0d3b9a6a72c265a2de2ffca2
2009-11-05 15:40:35 -08:00
Mathias Agopian
6fee064809 fix[2228133] pixelflinger ignores the "vertical stride" leading to artifacts when playing back video
we lost the concept of vertical stride when moving video playback to EGLImage.
Here we bring it back in a somewhat hacky-way that will work only for the
softgl/mdp backend.
2009-11-02 17:48:33 -08:00
Mathias Agopian
54ba51dff2 fix [2143798] Need to figure out how to do video
Use EGLImageKHR instead of copybit directly.
    We now have the basis to use streaming YUV textures (well, in fact
    we already are). When/if we use the GPU instead of the MDP we'll
    need to make sure it supports the appropriate YUV format.

    Also make sure we compile if EGL_ANDROID_image_native_buffer is not supported
2009-10-27 13:13:29 -07:00
Mathias Agopian
38a7fa2ae3 fix [2182249] [MR1] valgrind error in surface flinger 2009-10-15 18:08:15 -07:00
Mathias Agopian
d3144beec6 fix [2170283] SurfaceFlinger crashes on OOM.
when running out of memory, a null handle is returned but the error code may not be set.
In that case we need to return NO_MEMORY instead of NO_ERROR, so that the calling code
won't try to dereference the null pointer.
2009-10-07 18:03:35 -07:00
Mathias Agopian
e700501d0e fix [2170319] gmail bulk operation checkbox latency on passion
This also fixes [2152536] ANR in browser

When SF is enqueuing buffers faster than SF dequeues them.
The update flag in SF is not counted and under some situations SF will only
dequeue the first buffer. The state at this point is not technically
corrupted, it's valid, but just delayed by one buffer.

In the case of the Browser ANR, because the last enqueued buffer was delayed
the resizing of the current buffer couldn't happen.

The system would always fall back onto its feet if anything -else- in
tried to draw, because the "late" buffer would be picked up then.
2009-10-07 16:44:10 -07:00
Mathias Agopian
9ec430adae fix [2152536] ANR in browser
A window is created and the browser is about to render into it the
very first time, at that point it does an IPC to SF to request a new
buffer. Meanwhile, the window manager removes that window from the
list and the shared memory block it uses is marked as invalid.
However, at that point, another window is created and is given the
same index (that just go freed), but a different identity and resets
the "invalid" bit in the shared block. When we go back to the buffer
allocation code, we're stuck because the surface we're allocating for
is gone and we don't detect it's invalid because the invalid bit has
been reset.

It is not sufficient to check for the invalid bit, I should
also check that identities match.
2009-10-06 19:00:57 -07:00
Mathias Agopian
b26af23744 fix [2168531] have software-only gralloc buffer side-step the HAL 2009-10-06 17:00:25 -07:00
Mathias Agopian
3330b20303 fix [2167050] glTexImage2D code path buggy in SurfaceFlinger
When EGLImage extension is not available, SurfaceFlinger will fallback to using
glTexImage2D and glTexSubImage2D instead, which requires 50% more memory and an
extra copy. However this code path has never been exercised and had some bugs
which this patch fix.

Mainly the scale factor wasn't computed right when falling back on glDrawElements.
We also fallback to this mode of operation if a buffer doesn't have the adequate
usage bits for EGLImage usage.

This changes only code that is currently not executed. Some refactoring was needed to
keep the change clean. This doesn't change anything functionaly.
2009-10-06 17:00:25 -07:00
Wu-cheng Li
e6a550d02f Add zoom functions and sendCommand.
b2060030
2009-10-06 13:25:10 -07:00
Mathias Agopian
0b3ad46a26 Attempt to fix [2152536] ANR in browser
The ANR is caused by SurfaceFlinger waiting for buffers of a removed surface to become availlable.
When it is removed from the current list, a Surface is marked as NO_INIT, which causes SF to return
immediately in the above case. For some reason, the surface here wasn't marked as NO_INIT.

This change makes the code more robust by always (irregadless or errors) setting the NO_INIT status
in all code paths where a surface is removed from the list.

Additionaly added more information in the logs, should this happen again.
2009-10-02 18:12:30 -07:00
Wu-cheng Li
eb16a09f59 Change FLASH_MODE_VIDEO_LIGHT to FLASH_MODE_TORCH. 2009-09-28 13:51:59 -07:00
Wu-cheng Li
cc6ce203be Add camera parameter key constants and documentation. 2009-09-25 14:23:56 -07:00
Mathias Agopian
dd3423c624 fix [2132563] stuck in boot animation (framebuffer_device_open: Failed to create flip chain) 2009-09-23 15:49:32 -07:00
Marco Nelissen
a455793a8d fbDev wasn't initialized of hw_get_module failed, but was then used anyway. 2009-09-23 10:56:51 -07:00
Mathias Agopian
74faca212e Android side of the fix for [2121211] Sholes has stutter during animations
a new method, compostionComplete() is added to the framebuffer hal, it is used by surfaceflinger to signal the driver that the composition is complete, BEFORE it releases its client. This gives a chance to the driver to
2009-09-17 16:18:16 -07:00
Mathias Agopian
86f7329080 add basic time stats for surfaces lock time 2009-09-17 01:35:28 -07:00
Mathias Agopian
68a6afeb26 fix [2122448] android_native_window_t::setUsage() only reallocates the first buffer
Take 2. We needed to check that the usage flags are "good enough" as opposed to "the same".

This reverts commit 8f17a762fe9e9f31e4e86cb60ff2bfb6b10fdee6.
2009-09-15 19:21:31 -07:00
Mathias Agopian
3910f5467a Revert "fix [2122448] android_native_window_t::setUsage() only reallocates the first buffer"
This reverts commit 486aa963b63e20b7910e1004cebb4f0afabbd80f.
2009-09-15 18:57:06 -07:00
Mathias Agopian
d18afab9d6 fix [2122448] android_native_window_t::setUsage() only reallocates the first buffer 2009-09-15 17:34:04 -07:00
Chih-Chung Chang
00900eb354 Fix 2083478: Camera needs an auto-focus cancel API
Change-Id: I13bda991b32aee47e82b5cf9d43b3021c416a9a2
2009-09-15 18:29:03 +08:00
Mathias Agopian
c7d5601081 make sure to update the tail pointer when undoing a dequeue 2009-09-14 15:48:42 -07:00
Mathias Agopian
40d5799622 fix [2111536] [FAST BLOCKER] Device is soft rebooted after ending the call through voice dialer 2009-09-11 19:18:20 -07:00
Mathias Agopian
48d819a131 fix [2112575] stuck on DequeueCondition for a surface that doesn't exist anymore
this also fixes part of [2111536] Device is soft rebooted after ending the call through voice dialer
2009-09-10 19:41:18 -07:00
Mathias Agopian
b58b5d72d6 make sure conditions will return when the status of a surface is not NO_ERROR 2009-09-10 16:55:13 -07:00
Andy McFadden
e0a963b72e Fix sim-eng build.
Appears to have been broken by:

commit 9779b221e999583ff89e0dfc40e56398737adbb3
Author: Mathias Agopian <mathias@google.com>
Date:   Mon Sep 7 16:32:45 2009 -0700

    fix [2068105] implement queueBuffer/lockBuffer/dequeueBuffer properly

For some reason we don't like to have "-lpthread" globally -- it's a no-op
on device builds, but required for many host tools and all sim binaries --
so adding the use of pthread calls requires adding the library explicitly.
2009-09-09 08:02:54 -07:00
Mathias Agopian
cbb288bfe8 fix [2068105] implement queueBuffer/lockBuffer/dequeueBuffer properly
Rewrote SurfaceFlinger's buffer management from the ground-up.
The design now support an arbitrary number of buffers per surface, however the current implementation is limited to four. Currently only 2 buffers are used in practice.

The main new feature is to be able to dequeue all buffers at once (very important when there are only two). 

A client can dequeue all buffers until there are none available, it can lock all buffers except the last one that is used for composition. The client will block then, until a new buffer is enqueued.

The current implementation requires that buffers are locked in the same order they are dequeued and enqueued in the same order they are locked. Only one buffer can be locked at a time.

eg. Allowed sequence:   DQ, DQ, LOCK, Q, LOCK, Q
eg. Forbidden sequence: DQ, DQ, LOCK, LOCK, Q, Q
2009-09-07 16:32:45 -07:00
Dianne Hackborn
39bf918e21 Work on issue #2079167: Flickering issue across multiple UI
This addresses a few parts of the bug:

- There was a small issue in the window manager where we could show a window
  too early before the transition animation starts, which was introduced
  by the recent wallpaper work.  This was the cause of the flicker when
  starting the dialer for the first time.

- There was a much larger problem that has existing forever where moving
  an application token to the front or back was not synchronized with the
  application animation transaction.  This was the cause of the flicker
  when hanging up (now that the in-call screen moves to the back instead
  of closing and we always have a wallpaper visible).  The approach to
  solving this is to have the window manager go ahead and move the app
  tokens (it must in order to keep in sync with the activity manager), but
  to delay the actual window movement: perform the movement to front when
  the animation starts, and to back when it ends.  Actually, when the
  animation ends, we just go and completely rebuild the window list to
  ensure it is correct, because there can be ways people can add windows
  while in this intermediate state where they could end up at the wrong
  place once we do the delayed movement to the front or back.  And it is
  simply reasuring to know that every time we finish a full app transition,
  we re-evaluate the world and put everything in its proper place.

Also included in this change are a few little tweaks to the input system,
to perform better logging, and completely ignore input devices that do not
have any of our input classes.  There is also a little cleanup of evaluating
configuration changes to not do more work than needed when an input
devices appears or disappears, and to only log a config change message when
the config is truly changing.

Change-Id: Ifb2db77f8867435121722a6abeb946ec7c3ea9d3
2009-09-02 17:20:25 -07:00
Mike Lockwood
07549f984d EventHub: Fix file descriptor leak.
Signed-off-by: Mike Lockwood <lockwood@android.com>
2009-08-28 13:30:03 -07:00
Mathias Agopian
04bc12bd43 fix [2070341] [FAST BLOCKER] can't successfully setup erc52 2009-08-21 15:44:17 -07:00
Mathias Agopian
1c97d2ebe1 fix a bug that caused the PixelFormat viewed by Surface to be wrong.
what happened is that the efective pixel format is calculated by SF but Surface nevew had access to it directly.
in particular this caused query(FORMAT) to return the requested format instead of the effective format.
2009-08-19 17:46:26 -07:00
Mathias Agopian
50517543d8 fix [2063336] Surface.lockSurface throws IllegalArgumentException when out of memory 2009-08-19 17:10:18 -07:00
Mathias Agopian
ba5972ffdc make sure to update a surface's usage bits when it changes, instead of only the first time.
also fixed a few locking issues in Surface and commented how each member is protected.
2009-08-14 18:52:17 -07:00
Mathias Agopian
5221271375 second take, hopefully this time it doesn't break one of the builds: "SurfaceFlinger will now allocate buffers based on the usage specified by the clients. This allows to allocate the right kind of buffer automatically, without having the user to specify anything." 2009-08-11 23:32:29 -07:00
Fred Quintana
b2fd4665e6 Revert "SurfaceFlinger will now allocate buffers based on the usage specified by the clients. This allows to allocate the right kind of buffer automatically, without having the user to specify anything."
This reverts commit 8b76a0ac6fbf07254629ed1ea86af014d5abe050.
2009-08-11 20:49:35 -07:00
Mathias Agopian
df37b62c62 SurfaceFlinger will now allocate buffers based on the usage specified by the clients. This allows to allocate the right kind of buffer automatically, without having the user to specify anything.
This change makes SurfaceHolder.setType(GPU) obsolete (it's now ignored).
Added an API to android_native_window_t to allow extending the functionality without ever breaking binary compatibility. This is used to implement the new set_usage() API. This API needs to be called by software renderers because the default is to use usage flags suitable for h/w.
2009-08-11 16:12:56 -07:00
Mathias Agopian
8c12c7aec3 added EGLUtils::strerror 2009-08-07 16:37:21 -07:00
Mathias Agopian
42db9dcea2 better error handling 2009-08-06 20:46:44 -07:00
Android (Google) Code Review
f9694507ec Merge change 20365
* changes:
  oops, EGLConfig of value zero may be valid
2009-08-06 17:15:11 -07:00
Mathias Agopian
b97603dcf0 oops, EGLConfig of value zero may be valid 2009-08-06 17:14:10 -07:00
Android (Google) Code Review
b2001065b9 Merge changes 20345,20346,20347
* changes:
  update most gl tests to use EGLUtils
  added two EGL helpers for selecting a config matching a certain pixelformat or native window type
  added NATIVE_WINDOW_FORMAT attribute to android_native_window_t
2009-08-06 16:27:47 -07:00
Mathias Agopian
6cf50a770d added two EGL helpers for selecting a config matching a certain pixelformat or native window type 2009-08-06 16:05:39 -07:00
Mathias Agopian
6b1f41004f added NATIVE_WINDOW_FORMAT attribute to android_native_window_t 2009-08-06 16:04:29 -07:00
Iliyan Malchev
34193b3168 EventHub: pass the name of each input device up to Java
Signed-off-by: Iliyan Malchev <malchev@google.com>
2009-08-06 14:52:13 -07:00
Android (Google) Code Review
46078d9978 Merge change 20133
* changes:
  don't crash when SurfaceBuffer::writeToParcel is given a null argument
2009-08-05 12:52:51 -07:00
Mathias Agopian
3eded94924 don't crash when SurfaceBuffer::writeToParcel is given a null argument 2009-08-05 12:22:30 -07:00
Dianne Hackborn
c591736c66 Finish implementation of multiple pointer support for MotionEvent.
The major things going on here:

- The MotionEvent API is now extended to included "pointer ID" information, for
  applications to keep track of individual fingers as they move up and down.
  PointerLocation has been updated to take advantage of this.

- The input system now has logic to generate MotionEvents with the new ID
  information, synthesizing an identifier as new points are down and trying to
  keep pointer ids consistent across events by looking at the distance between
  the last and next set of pointers.

- We now support the new multitouch driver protocol, and will use that instead
  of the old one if it is available.  We do NOT use any finger id information
  coming from the driver, but always synthesize pointer ids in user space.
  (This is simply because we don't yet have a driver reporting this information
  from which to base an implementation on.)

- Increase maximum number of fingers to 10.  This code has only been used
  with a driver that reports up to 2, so no idea how more will actually work.

- Oh and the input system can now detect and report physical DPAD devices.
2009-08-04 20:53:52 -07:00
Mathias Agopian
cf81c84e43 be more robust when errors occur upon EGL surface creation (ie: don't crash) 2009-07-31 14:47:00 -07:00