Fixed a bug where we would lose the first touch point when swiping out of
the virtual key area.
Fixed a bug where we would not send an ACTION_MOVE event in cases where
individual pointers went down/up and the remaining pointers actually moved.
This is important since many applications do not handle pointer movements
during ACTION_POINTER_DOWN or ACTION_POINTER_UP. In the case of
ACTION_POINTER_UP the movement was completely lost since all pointers were
dispatched using their old location rather than the new location.
Improved motion event validation to check for duplicate pointer ids.
Added an input source constant that was missing from the NDK api but
defined in the framework api.
Added a timestamp when reporting added/removed devices in EventHub.
Bug: 3070082
Change-Id: I3206a030f43b7616e2f48006e5a9d522c4d92e56
Useful for tweaking touch screen alignment without having to modify the
kernel device driver x/y axis bounds.
Change-Id: I6ca43d3c138548f9dfb76aa33150a0c853698fb6
Added new key maps for external keyboards. These maps are intended to
be shared across devices by inheriting the "keyboards.mk" product
makefile as part of the device's product definition.
One of the trickier changes here was to unwind some code in
MetaKeyKeyListener that assumed that only the low 8 bits of the meta key
state were actually used. The new code abandons bitshifts in favor
of simple conditionals that are probably easier to read anyways.
The special meta key state constants used by MetaKeyKeyListener
are now (@hide) defined in KeyEvent now so as to make it clearer that they
share the same code space even if those codes are not valid for KeyEvents.
The EventHub now takes care of detecting the appropriate key layout
map and key character map when the device is added and sets system
properties accordingly. This avoids having duplicate code in
KeyCharacterMap to probe for the appropriate key character map
although the current probing mechanism has been preserved for legacy
reasons just in case.
Added support for tracking caps lock, num lock and scroll lock and
turning their corresponding LEDs on and off as needed.
The key character map format will need to be updated to correctly support
PC style external keyboard semantics related to modifier keys.
That will come in a later change so caps lock doesn't actually do
anything right now except turn the shiny LEDs on and off...
Added a list of symbolic key names to KeyEvent and improved the toString()
output for debug diagnosis. Having this list in a central place in the
framework also allows us to remove it from Monkey so there is one less
thing to maintain when we add new keycodes.
Bug: 2912307
Change-Id: If8c25e8d50a7c29bbf5d663c94284f5f86de5da4
Added support for calibrating touch size for devices that report
size as an area measurement rather than as a width.
Fixed some bugs.
Bug: 3096045
Change-Id: I30a12e73752883516ed054f8af407204bca45814
This change fixes several issues where events would be dropped in the
input dispatch pipeline in such a way that the dispatcher could not
accurately track the state of the input device.
Given more robust tracking, we can now also provide robust cancelation
of input events in cases where an application might otherwise become
out of sync with the event stream due to ANR, app switch, policy decisions,
or forced focus transitions.
Pruned some of the input dispatcher log output.
Moved the responsibility for calling intercept*BeforeQueueing into
the input dispatcher instead of the input reader and added support for
early interception of injected events for events coming from trusted
sources. This enables behaviors like injection of media keys while
the screen is off, haptic feedback of injected virtual keys, so injected
events become more "first class" in a way.
Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
This change narrows the opportunity for a race condition setting the
resource Configuration while devices are being updated.
Change-Id: I58efa563f4129ab0fce7108511d16a99dff7e451
Added dumpsys reporting to EventHub.
Made the formatting a bit clearer.
Added 'Locked' suffix to some internal methods of EventHub.
Change-Id: Ic449560bcce378f6361895d27c66854e9724abb0
This feature is currently used to enable dragging the start and end
selection handles of a TextView at the same time. Could be used for
other things later.
Deleted some dead code in ArrowKeyMovementMethod and CursorControllers.
Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
This change is essentially a rewrite of the main input dispatcher loop
with the target identification folded in. Since the input dispatcher now
has all of the window state, it can make better decisions about
when to ANR.
Added a .5 second deadline for processing app switch keys. This behavior
predates Gingerbread but had not previously been ported.
Fixed some timing inaccuracies in the ANR accounting that could cause
applications to ANR sooner than they should have.
Added a mechanism for tracking key and motion events that have been
dispatched to a window so that appropriate cancelation events can be
synthesized when recovering from ANR. This change helps to keep
applications in sync so they don't end up with stuck buttons upon
recovery from ANRs.
Added more comments to describe the tricky parts of PollLoop.
Change-Id: I13dffca27acb436fc383980db536abc4d8b9e6f1
Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the
input manager whenever another visible window is partly or wholly obscured
the target of a touch event so that applications can filter touches
accordingly.
Added a "filterTouchesWhenObscured" attribute to View which can be used to
enable filtering of touches when the view's window is obscured.
Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
Finished the input device capability API.
Added a mechanism for calibrating touch devices to obtain more
accurate information about the touch contact area.
Improved pointer location to show new coordinates and capabilities.
Optimized pointer location display and formatting to avoid allocating large
numbers of temporary objects. The GC churn was causing the application to
stutter very badly when more than a couple of fingers were down).
Added more diagnostics.
Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
On single-touch devices, pointer up/down is signalled by a BTN_TOUCH
key event. Previously we handled BTN_TOUCH immediately but some drivers
may produce the sequence BTN_TOUCH, ABS_X, ABS_Y, SYN_REPORT on pointer down
which caused us to emit a bad initial pointer down location.
Now we wait for SYN_REPORT before reporting the up or down.
On multi-touch devices, pointer up can be signalled by as little as
the sequence SYN_MT_REPORT, SYN_REPORT. This change ensures that we
handle this case.
Added support for reading ABS_MT_PRESSURE when available.
Corrected mapping of touchMajor/touchMinor on single touch devices.
Minor code cleanup.
Change-Id: Ic7ec4811241ed85a06e59b8a839ca05180d491d4
Also fixed bug where old touch screen size could be reported by
getMotionRange if an orientation change occurred but the user has not
yet touched the screen.
Bug: 2877345
Change-Id: I7878f47458f310ed6ebe6a5d1b2c9bec2c598ab9
Refactored the input reader so that each raw input protocol is handled
by a separate subclass of the new InputMapper type. This way, behaviors
pertaining to keyboard, trackballs, touchscreens, switches and other
devices are clearly distinguished for improved maintainability.
Added partial support for describing capabilities of input devices
(incomplete and untested for now, will be fleshed out in later commits).
Simplified EventHub interface somewhat since InputReader is taking over
more of the work.
Cleaned up some of the interactions between InputManager and
WindowManagerService related to reading input state.
Fixed swiping finger from screen edge into display area.
Added logging of device information to 'dumpsys window'.
Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
Added several new coordinate values to MotionEvents to capture
touch major/minor area, tool major/minor area and orientation.
Renamed NDK input constants per convention.
Added InputDevice class in Java which will eventually provide
useful information about available input devices.
Added APIs for manufacturing new MotionEvent objects with multiple
pointers and all necessary coordinate data.
Fixed a bug in the input dispatcher where it could get stuck with
a pointer down forever.
Fixed a bug in the WindowManager where the input window list could
end up containing stale removed windows.
Fixed a bug in the WindowManager where the input channel was being
removed only after the final animation transition had taken place
which caused spurious WINDOW DIED log messages to be printed.
Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
Removed old input dispatch code.
Refactored the policy callbacks.
Pushed a tiny bit of the power manager state down to native.
Fixed long press on MENU.
Made the virtual key detection and cancelation a bit more precise.
Change-Id: I5d8c1062f7ea0ab3b54c6fadb058c4d5f5a9e02e
This change mainly unwinds a premature optimization in the
dispatch pipeline.
To test HOME injection, run 'adb shell input keyevent 3'.
Change-Id: I1c4b7377c205da7c898014b8b07fc6dc1d46e4dd
Set a default orientation of ROTATION_0.
Added some more careful checks based on whether we have valid
absolute axis information from the driver.
Reset key repeating during configuration changes since the keyboard
device may have been removed.
Change-Id: I685960828acffcb17595fc5683309e8064a76714
Target identification is now fully native.
Fixed a couple of minor issues related to input injection.
Native input enabled by default, can be disabled by setting
WindowManagerPolicy.ENABLE_NATIVE_INPUT_DISPATCH to false.
Change-Id: I7edf66ed3e987cc9306ad4743ac57a116af452ff
Added ANRs handling.
Added event injection.
Fixed a NPE ActivityManagerServer writing ANRs to the drop box.
Fixed HOME key interception.
Fixed trackball reporting.
Fixed pointer rotation in landscape mode.
Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
Added more tests.
Fixed a regression in Vector.
Fixed bugs in pointer tracking.
Fixed a starvation issue in PollLoop when setting or removing callbacks.
Fixed a couple of policy nits.
Modified the internal representation of MotionEvent to be more
efficient and more consistent.
Added code to skip/cancel virtual key processing when there are multiple
pointers down. This helps to better disambiguate virtual key presses
from stray touches (such as cheek presses).
Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
Refactored the code to eliminate potential deadlocks due to re-entrant
calls from the policy into the dispatcher. Also added some plumbing
that will be used to notify the framework about ANRs.
Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
The old dispatch mechanism has been left in place and continues to
be used by default for now. To enable native input dispatch,
edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy.
Includes part of the new input event NDK API. Some details TBD.
To wire up input dispatch, as the ViewRoot adds a window to the
window session it receives an InputChannel object as an output
argument. The InputChannel encapsulates the file descriptors for a
shared memory region and two pipe end-points. The ViewRoot then
provides the InputChannel to the InputQueue. Behind the
scenes, InputQueue simply attaches handlers to the native PollLoop object
that underlies the MessageQueue. This way MessageQueue doesn't need
to know anything about input dispatch per-se, it just exposes (in native
code) a PollLoop that other components can use to monitor file descriptor
state changes.
There can be zero or more targets for any given input event. Each
input target is specified by its input channel and some parameters
including flags, an X/Y coordinate offset, and the dispatch timeout.
An input target can request either synchronous dispatch (for foreground apps)
or asynchronous dispatch (fire-and-forget for wallpapers and "outside"
targets). Currently, finding the appropriate input targets for an event
requires a call back into the WindowManagerServer from native code.
In the future this will be refactored to avoid most of these callbacks
except as required to handle pending focus transitions.
End-to-end event dispatch mostly works!
To do: event injection, rate limiting, ANRs, testing, optimization, etc.
Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
