This does not actually change the framebuffer format. It merely
fakes this format to surfaceflinger so that when it creates
framebuffer surfaces it will use this format. It's really a giant
HACK to allow interworking with buggy gralloc+GPU driver
implementations. You should *NEVER* need to set this for shipping
devices.
Change-Id: I03eeb5b4d72838ef219df386ecc489fc20ab9cc7
Signed-off-by: Dima Zavin <dima@android.com>
Instead of sending finished signals immediately when appending to
a batch, record the chain of sequence numbers that were part of
the batch and then send finished signals all at once when done.
This change helps the dispatcher keep track of the true state
of the application and can improve ANR detection slightly.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I463c2221e2aa8fdf1c3d670c18e39e59ab69b0db
To support this feature, the input dispatcher now allows input
events to be acknowledged out-of-order. As a result, the
consumer can choose to defer handling an input event from one
device (because it is building a big batch) while continuing
to handle input events from other devices.
The InputEventReceiver now sends a notification when a batch
is pending. The ViewRoot handles this notification by scheduling
a draw on the next sync. When the draw happens, the InputEventReceiver
is instructed to consume all pending batched input events, the
input event queue is fully processed (as much as possible),
and then the ViewRoot performs traversals as usual.
With these changes in place, the input dispatch latency is
consistently less than one frame as long as the application itself
isn't stalled. Input events are delivered to the application
as soon as possible and are handled as soon as possible. In practice,
it is no longer possible for an application to build up a huge
backlog of touch events.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I42c01117eca78f12d66d49a736c1c122346ccd1d
This change enables the input dispatcher to send multiple touch
events to an application without waiting for them to be acknowledged.
Essentially this is a variation on the old streaming optimization
but it is much more comprehensive. Event dispatch will stall as
soon as 0.5sec of unacknowledged events are accumulated or a
focused event (such as a key event) needs to be delivered.
Streaming input events makes a tremendous difference in application
performance. The next step will be to enable batching of input
events on the client side once again.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I025df90c06165d719fcca7f63eed322a5cce4a78
Since we will not longer be modifying events in place, we don't need
to use an ashmem region for input. Simplified the code to instead
use a socket of type SOCK_SEQPACKET.
This is part of a series of changes to improve input system pipelining.
Bug: 5963420
Change-Id: I05909075ed8b61b93900913e44c6db84857340d8
This adds basic support for clip regions. It is currently disabled at compile
time. Enabling clip regions will require setting up a stencil buffer.
Change-Id: I638616a972276e38737f8ac0633692c3845eaa74
Stop using system properties to publish information about
the key character map path. Instead, we can retrieve it
on demand by asking the window manager.
It was possible to exhaust the supply of system properties
when repeatedly adding and removing input devices.
Bug: 5532806
Change-Id: Idd361a24ad7db2edc185c8546db7fb05f9c28669
the boolean operation code assumes rects are valid and
could go into an infinite loop if not. make sure we
abort before that happens.
Bug: 5331198, 5334829
Change-Id: Iee4e3b838ecf504ef21f7447fd2e34a56e7dc3f8
Bug: 5335420
Fixed a bug in VelocityTracker where the output velocity was
not being set to zero when not available.
Added a condition to ensure that the velocity is at least
the minimum fling velocity before continuing. If not, then
the user is trying to stop the fling and scroll more precisely.
Change-Id: I36634b0c3f7a9a09cf20c33f71d41163a8e33eed
Bug: 5265529
Rewrote the velocity tracker to fit a polynomial curve
to pointer movements using least squares linear regression.
The velocity is simply the first derivative of this polynomial.
Clients can also obtain an Estimator that describes the
complete terms of the estimating polynomial including
the coefficient of determination which provides a measure
of the quality of the fit (confidence).
Enhanced PointerLocation to display the movement curve predicted
by the estimator in addition to the velocity vector.
By default, the algorithm computes a 2nd degree (quadratic)
polynomial based on a 100ms recent history horizon.
Change-Id: Id377bef44117fce68fee2c41f90134ce3224d3a1
Bug: 5265529
Calculate the velocity using the most recent touch sample as the
point of reference instead of the oldest. This change more heavily
weights recent touch samples and reduces the sample time window
used for calculation. This significantly improves the accuracy
of fling gesture detection.
Change-Id: Ib1940933e786e5f6a731552a99bcd9400741d55f
the original connect/disconnect hooks are deprecated
and replace by api_connect/api_disconnect. the original
hooks are no no-ops.
api_connect/api_disconnect is now only called from the
android framework.
Bug: 5057915
Change-Id: I8ca64cd1acd6cabf915bf54689ec2e5f6dfa495a
Bug: 5064702
Introduced the concept of an InputListener to further decouple
the InputReader from the InputDispatcher. The InputListener
exposes just the minimum interface that the InputReader needs
to communicate with the outside world. The InputReader
passes arguments to the InputListener by reference, which makes
it easy to queue them up.
Consolidated all of the InputReader locks into one simple global
Mutex. The reason this wasn't done before was due to potential
re-entrance in outbound calls to the InputDispatcher. To fix this,
the InputReader now queues up all of the events it wants to send
using a QueuedInputListener, then flushes them outside of the
critical section after all of the event processing is finished.
Removing all of the InputMapper locks greatly simplifies the
implementation.
Added tests for new stylus features such as buttons, tool types,
and hovering.
Added some helpers to BitSet32 to handle common code patterns
like finding the first marked bit and clearing it.
Fixed a bug in VelocityTracker where the wrong pointer trace
could get cleared when handling ACTION_POINTER_DOWN. Oops.
Changed PointerCoords so it no longer stores useless zero
axis values. Removed editAxisValue because it is not very
useful when all zero value axes are absent and therefore
cannot be edited in place.
Added dispatch of stylus hover events.
Added support for distance and tool types.
Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
GraphicAllocator debugging cannot deal with
custom HAL formats. make this more obvious in the
log.
Change-Id: I202e58a7f213f32e725aa4eac62cdf6e50ca5894
We should use all-makefiles-under instead.
all-subdir-makefiles can be used only before any "include" statement.
Before this change, both subdirs were actually not included.
Change-Id: I6bf35d07f294a5012c9322096f999ac26e37432f
- fixed uninitialized variable
- set hint to indentity when transform is too complex
- make sure FrameBufferNativeWindow doesn't fail on needed perform commands
Bug: 4487161
Change-Id: I7cb2b0869b72404732eca7cb2d145ff669e2ed9b
This makes ANativeWindow_lock/ANativeWindow_unlockAndPost work
with ANativeWindows implemented by Surface and SurfaceTextureClient.
Also, Surface now inherits directly from SurfaceTextureClient.
Bug: 5003724
Change-Id: I9f285877c7bae9a262e9a7af91c2bae78804b2ef
This change fixes how the Android EGL layer overrides the size and
format of an ANativeWindow in eglCreateWindowSurface. The new behavior
is to leave the size untouched when overriding the format. The previous
behavior was to reset the ANativeWindow to use the default size set by
the ANativeWindow implementation.
It also adds two new 'perform' methods to the ANativeWindow interface:
set_buffers_dimensions and set_buffers_format, and redefines the
behavior of set_buffers_geometry to be the combination of these two new
methods.
Additionally, this change adds an error check for the return value of
the new native_window_set_buffers_format call, which required adding a
(stub) handler for to FramebufferNativeWindow.
Change-Id: I805c7ccd8d4730dfb132d10d8bc3fb058a0b9df1
- renderscript now calls EGL directly instead of relying on this function
- surfaceflinger also does its own EGLConfig selection
- selectConfigForPixelFormat stays for legacy reason (many tests use it) but
it now only tries to match the alpha channel of the format rather than the
format itself.
this will allow implementations who don't support the exact formats
defined in the HAL to work properly.
Bug: 4998223
Change-Id: Ic664dfc14d5072a514b6f77a115d1521bfc1578f
Fixed some issues where inconsistent streams of events could
be generated by the dispatcher, particularly when switching from
hovering with one device to hovering with another.
Fixed a bug where the touch pad would fail to generate a new
HOVER_MOVE following a tap event. As a result, the hover event
stream would not resume until the user touched the touch pad
again.
Change-Id: I444dce84641fb12e56a0af84c931520771d6c493
Bug: 4364920
Velocity damping proved to be a bad idea because it would
cause a significant ramp in velocity at the beginning of
a gesture, instead of the desired smooth behavior. Oh well.
Change-Id: Ie631946f47ef2492bd71fbed1ab44bbb39a875a8
Added a new PointerIcon API (hidden for now) for loading
pointer icons.
Fixed a starvation problem in the native Looper's sendMessage
implementation which caused new messages to be posted ahead
of old messages sent with sendMessageDelayed.
Redesigned the touch pad gestures to be defined in terms of
more fluid finger / spot movements. The objective is to reinforce
the natural mapping between fingers and spots which means there
must not be any discontinuities in spot motion relative to
the fingers.
Removed the SpotController stub and folded its responsibilities
into PointerController.
Change-Id: Ib647dbd7a57a7f30dd9c6e2c260df51d7bbdd18e
Some drivers report individual finger updates one at a time
instead of all at once. When 10 fingers are down, this can
cause the framework to have to handle 10 times as many events
each with 10 times as much data. Applications like
PointerLocation would get significantly bogged down by all
of the redundant samples.
This change coalesces samples that are closely spaced in time,
before they are dispatched, as part of the motion event batching
protocol.
Increased the size of the InputChannel shared memory buffer so
that applications can catch up faster if they accumulate a
backlog of samples.
Change-Id: Ibc6abf8af027d9003011ac75caa12941080caba3
Replaced VelocityTracker with a faster and more accurate
native implementation. This avoids the duplicate maintenance
overhead of having two implementations.
The new algorithm requires that the sample duration be at least
10ms in order to contribute to the velocity calculation. This
ensures that the velocity is not severely overestimated when
samples arrive in bursts.
The new algorithm computes the exponentially weighted moving
average using weights based on the relative duration of successive
sample periods.
The new algorithm is also more careful about how it handles
individual pointers going down or up and their effects on the
collected movement traces. The intent is to preserve the last
known velocity of pointers as they go up while also ensuring
that other motion samples do not count twice in that case.
Bug: 4086785
Change-Id: I95054102397c4b6a9076dc6a0fc841b4beec7920
1. Single finger tap performs a click.
2. Single finger movement moves the pointer (hovers).
3. Button press plus movement performs click or drag.
While dragging, the pointer follows the finger that is moving
fastest. This is important if there are additional fingers
down on the touch pad for the purpose of applying force
to an integrated button underneath.
4. Two fingers near each other moving in the same direction
are coalesced as a swipe gesture under the pointer.
5. Two or more fingers moving in arbitrary directions are
transformed into touches in the vicinity of the pointer.
This makes scale/zoom and rotate gestures possible.
Added a native VelocityTracker implementation to enable intelligent
switching of the active pointer during drags.
Change-Id: I7b7ddacc724fb1306e1590dbaebb740d3130d7cd
Added the concept of pointer properties in a MotionEvent.
This is currently used to track the pointer tool type to enable
applications to distinguish finger touches from a stylus.
Button states are also reported to application as part of touch events.
There are no new actions for detecting changes in button states.
The application should instead query the button state from the
MotionEvent and take appropriate action as needed.
A good time to check the button state is on ACTION_DOWN.
As a side-effect, applications that do not support multiple buttons
will treat primary, secondary and tertiary buttons identically
for all touch events.
The back button on the mouse is mapped to KEYCODE_BACK
and the forward button is mapped to KEYCODE_FORWARD.
Added basic plumbing for the secondary mouse button to invoke
the context menu, particularly in lists.
Added clamp and split methods on MotionEvent to take care of
common filtering operations so we don't have them scattered
in multiple places across the framework.
Bug: 4260011
Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
