ADHOC/replicant-frameworks_native
3
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5053f71ad4
replicant-frameworks_native/include/ui/Input.h

863 lines
26 KiB
C
Raw Normal View History

Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _UI_INPUT_H
#define _UI_INPUT_H
/**
* Native input event structures.
*/
#include <android/input.h>
#include <utils/Vector.h>
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
#include <utils/KeyedVector.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
#include <utils/Timers.h>
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
#include <utils/RefBase.h>
#include <utils/String8.h>
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
#include <utils/BitSet.h>
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
#ifdef HAVE_ANDROID_OS
class SkMatrix;
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Additional private constants not defined in ndk/ui/input.h.
*/
enum {
Add a little input event consistency verifier. The idea is to assist with debugging by identifying cases in which the input event stream is corrupted. Change-Id: I0a00e52bbe2716be1b3dfc7c02a754492d8e7f1f
2011-03-01 02:27:14 +00:00
/* Private control to determine when an app is tracking a key sequence. */
AKEY_EVENT_FLAG_START_TRACKING = 0x40000000,
/* Key event is inconsistent with previously sent key events. */
AKEY_EVENT_FLAG_TAINTED = 0x80000000,
};
enum {
/* Motion event is inconsistent with previously sent motion events. */
AMOTION_EVENT_FLAG_TAINTED = 0x80000000,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
Fix getSwitchState. InputReader::getSwitchState always returns AKEY_STATE_UNKNOWN because SwitchInputMapper::getSources() returns 0 which cannot match any source mask including AINPUT_SOURCE_ANY. As a result initial lid switch detection is broken. This change adds a new source constant AINPUT_SOURCE_SWITCH that indicates that the source has switches. Change-Id: I5321ecf0ce84f1c2b4535f6c163d3f4dcf9b7a9b
2011-01-20 02:41:38 +00:00
enum {
/*
* Indicates that an input device has switches.
* This input source flag is hidden from the API because switches are only used by the system
* and applications have no way to interact with them.
*/
AINPUT_SOURCE_SWITCH = 0x80000000,
};
Fade out the mouse pointer after inactivity or other events. Fades out the mouse pointer: - after 15 seconds of inactivity normally - after 3 seconds of inactivity in lights out mode - after a non-modifier key down - after a touch down Extended the native Looper to support enqueuing time delayed messages. This is used by the PointerController to control pointer fade timing. Change-Id: I87792fea7dbe2d9376c78cf354fe3189a484d9da
2011-03-02 22:41:58 +00:00
/*
* SystemUiVisibility constants from View.
*/
enum {
ASYSTEM_UI_VISIBILITY_STATUS_BAR_VISIBLE = 0,
ASYSTEM_UI_VISIBILITY_STATUS_BAR_HIDDEN = 0x00000001,
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Maximum number of pointers supported per motion event.
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-27 05:20:12 +00:00
* Smallest number of pointers is 1.
Fix crashes caused by some input devices. The touch screen sometimes reports more than 10 pointers even though that's all we asked for. When this happens, we start dropping events with more than 10 pointers. This confuses applications and causes them to crash. Raised the limit to 16 pointers. Bug: 3331247 The default behavior was to identify all touch devices as touch screens. External devices that are plugged in are more likely to be touch pads not attached to a screen. Changed the default to be a touch pad and renamed some internal constants to avoid confusion. A certain mouse happens to also behave like a touch pad. That caused problems because we would see multiple concurrent traces of motion events coming from the same input device so we would batch them up. Added code to ensure that we don't batch events unless they come from the same *source* in addition to coming from the same *device*. Due to batching or misbehaving drivers, it's possible for the set of pointer ids to be different from what we expect when it comes time to split motion events across windows. As a result, we can generate motion events with 0 pointers. When we try to deliver those events, we cause an error in the InputTransport so we tear down the InputChannel and kill the application. Added code to check out assumption about pointer ids and drop the event gracefully instead. Patched up the tests to take into account the change in default behavior for identifying touch screens and touch pads. Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
2011-01-26 00:02:22 +00:00
* (We want at least 10 but some touch controllers obstensibly configured for 10 pointers
* will occasionally emit 11. There is not much harm making this constant bigger.)
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
*/
Fix crashes caused by some input devices. The touch screen sometimes reports more than 10 pointers even though that's all we asked for. When this happens, we start dropping events with more than 10 pointers. This confuses applications and causes them to crash. Raised the limit to 16 pointers. Bug: 3331247 The default behavior was to identify all touch devices as touch screens. External devices that are plugged in are more likely to be touch pads not attached to a screen. Changed the default to be a touch pad and renamed some internal constants to avoid confusion. A certain mouse happens to also behave like a touch pad. That caused problems because we would see multiple concurrent traces of motion events coming from the same input device so we would batch them up. Added code to ensure that we don't batch events unless they come from the same *source* in addition to coming from the same *device*. Due to batching or misbehaving drivers, it's possible for the set of pointer ids to be different from what we expect when it comes time to split motion events across windows. As a result, we can generate motion events with 0 pointers. When we try to deliver those events, we cause an error in the InputTransport so we tear down the InputChannel and kill the application. Added code to check out assumption about pointer ids and drop the event gracefully instead. Patched up the tests to take into account the change in default behavior for identifying touch screens and touch pads. Change-Id: Ic364bd4cb4cc6335d4a1213a26d6bdadc7e33505
2011-01-26 00:02:22 +00:00
#define MAX_POINTERS 16
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Add suuport for splitting touch events across windows. This feature is currently used to enable dragging the start and end selection handles of a TextView at the same time. Could be used for other things later. Deleted some dead code in ArrowKeyMovementMethod and CursorControllers. Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
2010-09-27 05:20:12 +00:00
/*
* Maximum pointer id value supported in a motion event.
* Smallest pointer id is 0.
* (This is limited by our use of BitSet32 to track pointer assignments.)
*/
#define MAX_POINTER_ID 31
First stab at attaching native event dispatching. Provides the basic infrastructure for a NativeActivity's native code to get an object representing its event stream that can be used to read input events. Still work to do, probably some API changes, and reasonable default key handling (so that for example back will still work). Change-Id: I6db891bc35dc9683181d7708eaed552b955a077e
2010-06-19 01:09:33 +00:00
/*
* Declare a concrete type for the NDK's input event forward declaration.
*/
IME events are now dispatched to native applications. And also: - APIs to show and hide the IME, and control its interaction with the app. - APIs to tell the app when its window resizes and needs to be redrawn. - API to tell the app the content rectangle of its window (to layout around the IME or status bar). There is still a problem with IME interaction -- we need a way for the app to deliver events to the IME before it handles them, so that for example the back key will close the IME instead of finishing the app. Change-Id: I37b75fc2ec533750ef36ca3aedd2f0cc0b5813cd
2010-07-14 00:48:30 +00:00
struct AInputEvent {
virtual ~AInputEvent() { }
};
First stab at attaching native event dispatching. Provides the basic infrastructure for a NativeActivity's native code to get an object representing its event stream that can be used to read input events. Still work to do, probably some API changes, and reasonable default key handling (so that for example back will still work). Change-Id: I6db891bc35dc9683181d7708eaed552b955a077e
2010-06-19 01:09:33 +00:00
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
* Declare a concrete type for the NDK's input device forward declaration.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
*/
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
struct AInputDevice {
virtual ~AInputDevice() { }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
namespace android {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
#ifdef HAVE_ANDROID_OS
class Parcel;
#endif
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Flags that flow alongside events in the input dispatch system to help with certain
* policy decisions such as waking from device sleep.
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-09 05:31:17 +00:00
*
* These flags are also defined in frameworks/base/core/java/android/view/WindowManagerPolicy.java.
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
*/
enum {
Support haptic feedback for virtual keys defined in key layout. Change-Id: I83e4108a87332692e03791dc066206becbc7941f
2010-10-01 21:55:30 +00:00
/* These flags originate in RawEvents and are generally set in the key map.
Add keycodes and meta-key modifiers to support external keyboards. Added new key maps for external keyboards. These maps are intended to be shared across devices by inheriting the "keyboards.mk" product makefile as part of the device's product definition. One of the trickier changes here was to unwind some code in MetaKeyKeyListener that assumed that only the low 8 bits of the meta key state were actually used. The new code abandons bitshifts in favor of simple conditionals that are probably easier to read anyways. The special meta key state constants used by MetaKeyKeyListener are now (@hide) defined in KeyEvent now so as to make it clearer that they share the same code space even if those codes are not valid for KeyEvents. The EventHub now takes care of detecting the appropriate key layout map and key character map when the device is added and sets system properties accordingly. This avoids having duplicate code in KeyCharacterMap to probe for the appropriate key character map although the current probing mechanism has been preserved for legacy reasons just in case. Added support for tracking caps lock, num lock and scroll lock and turning their corresponding LEDs on and off as needed. The key character map format will need to be updated to correctly support PC style external keyboard semantics related to modifier keys. That will come in a later change so caps lock doesn't actually do anything right now except turn the shiny LEDs on and off... Added a list of symbolic key names to KeyEvent and improved the toString() output for debug diagnosis. Having this list in a central place in the framework also allows us to remove it from Monkey so there is one less thing to maintain when we add new keycodes. Bug: 2912307 Change-Id: If8c25e8d50a7c29bbf5d663c94284f5f86de5da4
2010-09-13 00:55:08 +00:00
* NOTE: If you edit these flags, also edit labels in KeycodeLabels.h. */
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
POLICY_FLAG_WAKE = 0x00000001,
POLICY_FLAG_WAKE_DROPPED = 0x00000002,
POLICY_FLAG_SHIFT = 0x00000004,
POLICY_FLAG_CAPS_LOCK = 0x00000008,
POLICY_FLAG_ALT = 0x00000010,
POLICY_FLAG_ALT_GR = 0x00000020,
POLICY_FLAG_MENU = 0x00000040,
POLICY_FLAG_LAUNCHER = 0x00000080,
Support haptic feedback for virtual keys defined in key layout. Change-Id: I83e4108a87332692e03791dc066206becbc7941f
2010-10-01 21:55:30 +00:00
POLICY_FLAG_VIRTUAL = 0x00000100,
Add keycodes and meta-key modifiers to support external keyboards. Added new key maps for external keyboards. These maps are intended to be shared across devices by inheriting the "keyboards.mk" product makefile as part of the device's product definition. One of the trickier changes here was to unwind some code in MetaKeyKeyListener that assumed that only the low 8 bits of the meta key state were actually used. The new code abandons bitshifts in favor of simple conditionals that are probably easier to read anyways. The special meta key state constants used by MetaKeyKeyListener are now (@hide) defined in KeyEvent now so as to make it clearer that they share the same code space even if those codes are not valid for KeyEvents. The EventHub now takes care of detecting the appropriate key layout map and key character map when the device is added and sets system properties accordingly. This avoids having duplicate code in KeyCharacterMap to probe for the appropriate key character map although the current probing mechanism has been preserved for legacy reasons just in case. Added support for tracking caps lock, num lock and scroll lock and turning their corresponding LEDs on and off as needed. The key character map format will need to be updated to correctly support PC style external keyboard semantics related to modifier keys. That will come in a later change so caps lock doesn't actually do anything right now except turn the shiny LEDs on and off... Added a list of symbolic key names to KeyEvent and improved the toString() output for debug diagnosis. Having this list in a central place in the framework also allows us to remove it from Monkey so there is one less thing to maintain when we add new keycodes. Bug: 2912307 Change-Id: If8c25e8d50a7c29bbf5d663c94284f5f86de5da4
2010-09-13 00:55:08 +00:00
POLICY_FLAG_FUNCTION = 0x00000200,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
More native input event dispatching. Added ANRs handling. Added event injection. Fixed a NPE ActivityManagerServer writing ANRs to the drop box. Fixed HOME key interception. Fixed trackball reporting. Fixed pointer rotation in landscape mode. Change-Id: I50340f559f22899ab924e220a78119ffc79469b7
2010-06-18 03:52:56 +00:00
POLICY_FLAG_RAW_MASK = 0x0000ffff,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
/* These flags are set by the input dispatcher. */
// Indicates that the input event was injected.
POLICY_FLAG_INJECTED = 0x01000000,
Fix an event injection bug when the policy is bypassed. Added the concept of a "trusted" event to distinguish between events from attached input devices or trusted injectors vs. other applications. This change enables us to move certain policy decisions out of the dispatcher and into the policy itself where they can be handled more systematically. Cherry pick of b931a1b4 from gingerbread into master. Change-Id: I700a5f07b8b227878cea9437a289a45a245c0424
2010-10-11 21:20:19 +00:00
// Indicates that the input event is from a trusted source such as a directly attached
// input device or an application with system-wide event injection permission.
POLICY_FLAG_TRUSTED = 0x02000000,
Add input filter mechanism for accessibility. This patch adds a mechanism for capturing, filtering, transforming and injecting input events at a very low level before the input dispatcher attempts to deliver them to applications. At this time, the mechanism is only intended to be used by the accessibility system to implement built-in system-level accessibility affordances. The accessibility input filter is currently just a stub. It logs the input events receives and reinjects them unchanged, except that it transforms KEYCODE_Q into KEYCODE_Z. Currently, the accessibility input filter is installed whenever accessibility is enabled. We'll probably want to change that so it only enables the input filter when a screen reader is installed and we want touch exploration. Change-Id: I35764fdf75522b69d09ebd78c9766eb7593c1afe
2011-03-30 09:25:18 +00:00
// Indicates that the input event has passed through an input filter.
POLICY_FLAG_FILTERED = 0x04000000,
// Disables automatic key repeating behavior.
POLICY_FLAG_DISABLE_KEY_REPEAT = 0x08000000,
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
/* These flags are set by the input reader policy as it intercepts each event. */
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
// Indicates that the screen was off when the event was received and the event
// should wake the device.
POLICY_FLAG_WOKE_HERE = 0x10000000,
// Indicates that the screen was dim when the event was received and the event
// should brighten the device.
POLICY_FLAG_BRIGHT_HERE = 0x20000000,
Added more robust tracking and cancelation of events. This change fixes several issues where events would be dropped in the input dispatch pipeline in such a way that the dispatcher could not accurately track the state of the input device. Given more robust tracking, we can now also provide robust cancelation of input events in cases where an application might otherwise become out of sync with the event stream due to ANR, app switch, policy decisions, or forced focus transitions. Pruned some of the input dispatcher log output. Moved the responsibility for calling intercept*BeforeQueueing into the input dispatcher instead of the input reader and added support for early interception of injected events for events coming from trusted sources. This enables behaviors like injection of media keys while the screen is off, haptic feedback of injected virtual keys, so injected events become more "first class" in a way. Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
2010-10-09 05:31:17 +00:00
// Indicates that the event should be dispatched to applications.
// The input event should still be sent to the InputDispatcher so that it can see all
// input events received include those that it will not deliver.
POLICY_FLAG_PASS_TO_USER = 0x40000000,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
More work in progress on native events. Refactored the code to eliminate potential deadlocks due to re-entrant calls from the policy into the dispatcher. Also added some plumbing that will be used to notify the framework about ANRs. Change-Id: Iba7a10de0cb3c56cd7520d6ce716db52fdcc94ff
2010-06-15 08:31:58 +00:00
/*
* Describes the basic configuration of input devices that are present.
*/
struct InputConfiguration {
enum {
TOUCHSCREEN_UNDEFINED = 0,
TOUCHSCREEN_NOTOUCH = 1,
TOUCHSCREEN_STYLUS = 2,
TOUCHSCREEN_FINGER = 3
};
enum {
KEYBOARD_UNDEFINED = 0,
KEYBOARD_NOKEYS = 1,
KEYBOARD_QWERTY = 2,
KEYBOARD_12KEY = 3
};
enum {
NAVIGATION_UNDEFINED = 0,
NAVIGATION_NONAV = 1,
NAVIGATION_DPAD = 2,
NAVIGATION_TRACKBALL = 3,
NAVIGATION_WHEEL = 4
};
int32_t touchScreen;
int32_t keyboard;
int32_t navigation;
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Pointer coordinate data.
*/
struct PointerCoords {
Add new axes for joysticks and mouse wheels. Added API on InputDevice to query the set of axes available. Added API on KeyEvent and MotionEvent to convert keycodes and axes to symbolic name strings for diagnostic purposes. Added API on KeyEvent to query if a given key code is a gamepad button. Added a new "axis" element to key layout files to specify the mapping between raw absolute axis values and motion axis ids. Expanded the axis bitfield to 64bits to allow for future growth. Modified the Makefile for keyboard prebuilts to run the keymap validation tool during the build. Added layouts for two game controllers. Added default actions for game pad button keys. Added more tests. Fixed a bunch of bugs. Change-Id: I73f9166c3b3c5bcf4970845b58088ad467525525
2011-02-19 09:08:02 +00:00
enum { MAX_AXES = 14 }; // 14 so that sizeof(PointerCoords) == 64
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
// Bitfield of axes that are present in this structure.
Add new axes for joysticks and mouse wheels. Added API on InputDevice to query the set of axes available. Added API on KeyEvent and MotionEvent to convert keycodes and axes to symbolic name strings for diagnostic purposes. Added API on KeyEvent to query if a given key code is a gamepad button. Added a new "axis" element to key layout files to specify the mapping between raw absolute axis values and motion axis ids. Expanded the axis bitfield to 64bits to allow for future growth. Modified the Makefile for keyboard prebuilts to run the keymap validation tool during the build. Added layouts for two game controllers. Added default actions for game pad button keys. Added more tests. Fixed a bunch of bugs. Change-Id: I73f9166c3b3c5bcf4970845b58088ad467525525
2011-02-19 09:08:02 +00:00
uint64_t bits;
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
// Values of axes that are stored in this structure packed in order by axis id
// for each axis that is present in the structure according to 'bits'.
float values[MAX_AXES];
inline void clear() {
bits = 0;
}
Add new axes for joysticks and mouse wheels. Added API on InputDevice to query the set of axes available. Added API on KeyEvent and MotionEvent to convert keycodes and axes to symbolic name strings for diagnostic purposes. Added API on KeyEvent to query if a given key code is a gamepad button. Added a new "axis" element to key layout files to specify the mapping between raw absolute axis values and motion axis ids. Expanded the axis bitfield to 64bits to allow for future growth. Modified the Makefile for keyboard prebuilts to run the keymap validation tool during the build. Added layouts for two game controllers. Added default actions for game pad button keys. Added more tests. Fixed a bunch of bugs. Change-Id: I73f9166c3b3c5bcf4970845b58088ad467525525
2011-02-19 09:08:02 +00:00
float getAxisValue(int32_t axis) const;
status_t setAxisValue(int32_t axis, float value);
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
Better compat mode part one: start scaling windows. First step of improving app screen size compatibility mode. When running in compat mode, an application's windows are scaled up on the screen rather than being small with 1:1 pixels. Currently we scale the application to fill the entire screen, so don't use an even pixel scaling. Though this may have some negative impact on the appearance (it looks okay to me), it has a big benefit of allowing us to now treat these apps as normal full-screens apps and do the normal transition animations as you move in and out and around in them. This introduces fun stuff in the input system to take care of modifying pointer coordinates to account for the app window surface scaling. The input dispatcher is told about the scale that is being applied to each window and, when there is one, adjusts pointer events appropriately as they are being sent to the transport. Also modified is CompatibilityInfo, which has been greatly simplified to not be so insane and incomprehendible. It is now simple -- when constructed it determines if the given app is compatible with the current screen size and density, and that is that. There are new APIs on ActivityManagerService to put applications that we would traditionally consider compatible with larger screens in compatibility mode. This is the start of a facility to have a UI affordance for a user to switch apps in and out of compatibility. To test switching of modes, there is a new variation of the "am" command to do this: am screen-compat [on|off] [package] This mode switching has the fundamentals of restarting activities when it is changed, though the state still needs to be persisted and the overall mode switch cleaned up. For the few small apps I have tested, things mostly seem to be working well. I know of one problem with the text selection handles being drawn at the wrong position because at some point the window offset is being scaled incorrectly. There are probably other similar issues around the interaction between two windows because the different window coordinate spaces are done in a hacky way instead of being formally integrated into the window manager layout process. Change-Id: Ie038e3746b448135117bd860859d74e360938557
2011-04-27 22:52:56 +00:00
void scale(float scale);
Refactor input reader to add stylus support. Bug: 5064702 Introduced the concept of an InputListener to further decouple the InputReader from the InputDispatcher. The InputListener exposes just the minimum interface that the InputReader needs to communicate with the outside world. The InputReader passes arguments to the InputListener by reference, which makes it easy to queue them up. Consolidated all of the InputReader locks into one simple global Mutex. The reason this wasn't done before was due to potential re-entrance in outbound calls to the InputDispatcher. To fix this, the InputReader now queues up all of the events it wants to send using a QueuedInputListener, then flushes them outside of the critical section after all of the event processing is finished. Removing all of the InputMapper locks greatly simplifies the implementation. Added tests for new stylus features such as buttons, tool types, and hovering. Added some helpers to BitSet32 to handle common code patterns like finding the first marked bit and clearing it. Fixed a bug in VelocityTracker where the wrong pointer trace could get cleared when handling ACTION_POINTER_DOWN. Oops. Changed PointerCoords so it no longer stores useless zero axis values. Removed editAxisValue because it is not very useful when all zero value axes are absent and therefore cannot be edited in place. Added dispatch of stylus hover events. Added support for distance and tool types. Change-Id: I4cf14d134fcb1db7d10be5f2af7b37deef8f8468
2011-07-27 23:04:54 +00:00
inline float getX() const {
return getAxisValue(AMOTION_EVENT_AXIS_X);
}
inline float getY() const {
return getAxisValue(AMOTION_EVENT_AXIS_Y);
}
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
#ifdef HAVE_ANDROID_OS
status_t readFromParcel(Parcel* parcel);
status_t writeToParcel(Parcel* parcel) const;
#endif
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
bool operator==(const PointerCoords& other) const;
inline bool operator!=(const PointerCoords& other) const {
return !(*this == other);
}
void copyFrom(const PointerCoords& other);
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
private:
void tooManyAxes(int axis);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
/*
* Pointer property data.
*/
struct PointerProperties {
// The id of the pointer.
int32_t id;
// The pointer tool type.
int32_t toolType;
inline void clear() {
id = -1;
toolType = 0;
}
bool operator==(const PointerProperties& other) const;
inline bool operator!=(const PointerProperties& other) const {
return !(*this == other);
}
void copyFrom(const PointerProperties& other);
};
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
/*
* Input events.
*/
Update native activity & event APIs to follow correct conventions. Change-Id: Ie64fb3a9c68bc9c117fa5621b75d1f609e304e0e
2010-06-28 22:27:30 +00:00
class InputEvent : public AInputEvent {
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
public:
virtual ~InputEvent() { }
virtual int32_t getType() const = 0;
inline int32_t getDeviceId() const { return mDeviceId; }
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
inline int32_t getSource() const { return mSource; }
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
inline void setSource(int32_t source) { mSource = source; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
protected:
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
void initialize(int32_t deviceId, int32_t source);
Implement native key pre-dispatching to IMEs. This significantly re-works the native key dispatching code to allow events to be pre-dispatched to the current IME before being processed by native code. It introduces one new public API, which must be called after retrieving an event if the app wishes for it to be pre-dispatched. Currently the native code will only do pre-dispatching of system keys, to avoid significant overhead for gaming input. This should be improved to be smarted, filtering for only keys that the IME is interested in. Unfortunately IMEs don't currently provide this information. :p Change-Id: Ic1c7aeec8b348164957f2cd88119eb5bd85c2a9f
2010-07-16 00:44:53 +00:00
void initialize(const InputEvent& from);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t mDeviceId;
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
int32_t mSource;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
};
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
/*
* Key events.
*/
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
class KeyEvent : public InputEvent {
public:
virtual ~KeyEvent() { }
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
virtual int32_t getType() const { return AINPUT_EVENT_TYPE_KEY; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline int32_t getAction() const { return mAction; }
inline int32_t getFlags() const { return mFlags; }
inline int32_t getKeyCode() const { return mKeyCode; }
inline int32_t getScanCode() const { return mScanCode; }
inline int32_t getMetaState() const { return mMetaState; }
inline int32_t getRepeatCount() const { return mRepeatCount; }
inline nsecs_t getDownTime() const { return mDownTime; }
inline nsecs_t getEventTime() const { return mEventTime; }
Implement default key handling for native code. The native code now maintains a list of all keys that may use default handling. If the app finishes one of these keys without handling it, the key will be passed back off to Java for default treatment. Change-Id: I6a842a0d728eeafa4de7142fae573f8c11099e18
2010-06-30 02:20:40 +00:00
// Return true if this event may have a default action implementation.
static bool hasDefaultAction(int32_t keyCode);
bool hasDefaultAction() const;
// Return true if this event represents a system key.
static bool isSystemKey(int32_t keyCode);
bool isSystemKey() const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void initialize(
int32_t deviceId,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
int32_t source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t action,
int32_t flags,
int32_t keyCode,
int32_t scanCode,
int32_t metaState,
int32_t repeatCount,
nsecs_t downTime,
nsecs_t eventTime);
Implement native key pre-dispatching to IMEs. This significantly re-works the native key dispatching code to allow events to be pre-dispatched to the current IME before being processed by native code. It introduces one new public API, which must be called after retrieving an event if the app wishes for it to be pre-dispatched. Currently the native code will only do pre-dispatching of system keys, to avoid significant overhead for gaming input. This should be improved to be smarted, filtering for only keys that the IME is interested in. Unfortunately IMEs don't currently provide this information. :p Change-Id: Ic1c7aeec8b348164957f2cd88119eb5bd85c2a9f
2010-07-16 00:44:53 +00:00
void initialize(const KeyEvent& from);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
protected:
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t mAction;
int32_t mFlags;
int32_t mKeyCode;
int32_t mScanCode;
int32_t mMetaState;
int32_t mRepeatCount;
nsecs_t mDownTime;
nsecs_t mEventTime;
};
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
/*
* Motion events.
*/
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
class MotionEvent : public InputEvent {
public:
virtual ~MotionEvent() { }
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
virtual int32_t getType() const { return AINPUT_EVENT_TYPE_MOTION; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline int32_t getAction() const { return mAction; }
Improve VelocityTracker numerical stability. Replaced VelocityTracker with a faster and more accurate native implementation. This avoids the duplicate maintenance overhead of having two implementations. The new algorithm requires that the sample duration be at least 10ms in order to contribute to the velocity calculation. This ensures that the velocity is not severely overestimated when samples arrive in bursts. The new algorithm computes the exponentially weighted moving average using weights based on the relative duration of successive sample periods. The new algorithm is also more careful about how it handles individual pointers going down or up and their effects on the collected movement traces. The intent is to preserve the last known velocity of pointers as they go up while also ensuring that other motion samples do not count twice in that case. Bug: 4086785 Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
2011-03-15 02:39:54 +00:00
inline int32_t getActionMasked() const { return mAction & AMOTION_EVENT_ACTION_MASK; }
inline int32_t getActionIndex() const {
return (mAction & AMOTION_EVENT_ACTION_POINTER_INDEX_MASK)
>> AMOTION_EVENT_ACTION_POINTER_INDEX_SHIFT;
}
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
inline void setAction(int32_t action) { mAction = action; }
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
inline int32_t getFlags() const { return mFlags; }
Add a little input event consistency verifier. The idea is to assist with debugging by identifying cases in which the input event stream is corrupted. Change-Id: I0a00e52bbe2716be1b3dfc7c02a754492d8e7f1f
2011-03-01 02:27:14 +00:00
inline void setFlags(int32_t flags) { mFlags = flags; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline int32_t getEdgeFlags() const { return mEdgeFlags; }
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
inline void setEdgeFlags(int32_t edgeFlags) { mEdgeFlags = edgeFlags; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline int32_t getMetaState() const { return mMetaState; }
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
inline void setMetaState(int32_t metaState) { mMetaState = metaState; }
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
inline int32_t getButtonState() const { return mButtonState; }
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getXOffset() const { return mXOffset; }
inline float getYOffset() const { return mYOffset; }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline float getXPrecision() const { return mXPrecision; }
inline float getYPrecision() const { return mYPrecision; }
inline nsecs_t getDownTime() const { return mDownTime; }
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
inline void setDownTime(nsecs_t downTime) { mDownTime = downTime; }
inline size_t getPointerCount() const { return mPointerProperties.size(); }
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
inline const PointerProperties* getPointerProperties(size_t pointerIndex) const {
return &mPointerProperties[pointerIndex];
}
inline int32_t getPointerId(size_t pointerIndex) const {
return mPointerProperties[pointerIndex].id;
}
inline int32_t getToolType(size_t pointerIndex) const {
return mPointerProperties[pointerIndex].toolType;
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline nsecs_t getEventTime() const { return mSampleEventTimes[getHistorySize()]; }
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
const PointerCoords* getRawPointerCoords(size_t pointerIndex) const;
float getRawAxisValue(int32_t axis, size_t pointerIndex) const;
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getRawX(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getRawAxisValue(AMOTION_EVENT_AXIS_X, pointerIndex);
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getRawY(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getRawAxisValue(AMOTION_EVENT_AXIS_Y, pointerIndex);
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
float getAxisValue(int32_t axis, size_t pointerIndex) const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline float getX(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_X, pointerIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline float getY(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_Y, pointerIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline float getPressure(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_PRESSURE, pointerIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline float getSize(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_SIZE, pointerIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
inline float getTouchMajor(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_TOUCH_MAJOR, pointerIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getTouchMinor(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_TOUCH_MINOR, pointerIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getToolMajor(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_TOOL_MAJOR, pointerIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getToolMinor(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_TOOL_MINOR, pointerIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getOrientation(size_t pointerIndex) const {
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
return getAxisValue(AMOTION_EVENT_AXIS_ORIENTATION, pointerIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline size_t getHistorySize() const { return mSampleEventTimes.size() - 1; }
inline nsecs_t getHistoricalEventTime(size_t historicalIndex) const {
return mSampleEventTimes[historicalIndex];
}
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
const PointerCoords* getHistoricalRawPointerCoords(
size_t pointerIndex, size_t historicalIndex) const;
float getHistoricalRawAxisValue(int32_t axis, size_t pointerIndex,
size_t historicalIndex) const;
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getHistoricalRawX(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalRawAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_X, pointerIndex, historicalIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getHistoricalRawY(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalRawAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_Y, pointerIndex, historicalIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
float getHistoricalAxisValue(int32_t axis, size_t pointerIndex, size_t historicalIndex) const;
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline float getHistoricalX(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_X, pointerIndex, historicalIndex);
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
}
inline float getHistoricalY(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_Y, pointerIndex, historicalIndex);
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
}
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
inline float getHistoricalPressure(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_PRESSURE, pointerIndex, historicalIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
inline float getHistoricalSize(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_SIZE, pointerIndex, historicalIndex);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
}
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
inline float getHistoricalTouchMajor(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_TOUCH_MAJOR, pointerIndex, historicalIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getHistoricalTouchMinor(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_TOUCH_MINOR, pointerIndex, historicalIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getHistoricalToolMajor(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_TOOL_MAJOR, pointerIndex, historicalIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getHistoricalToolMinor(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_TOOL_MINOR, pointerIndex, historicalIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
inline float getHistoricalOrientation(size_t pointerIndex, size_t historicalIndex) const {
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
return getHistoricalAxisValue(
Fix a regression with MotionEvent parceling. Also added some more unit tests. Change-Id: I413654294d1a998eec056884e6df5eaa50f3daf4
2011-02-17 21:01:34 +00:00
AMOTION_EVENT_AXIS_ORIENTATION, pointerIndex, historicalIndex);
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
}
Improve VelocityTracker numerical stability. Replaced VelocityTracker with a faster and more accurate native implementation. This avoids the duplicate maintenance overhead of having two implementations. The new algorithm requires that the sample duration be at least 10ms in order to contribute to the velocity calculation. This ensures that the velocity is not severely overestimated when samples arrive in bursts. The new algorithm computes the exponentially weighted moving average using weights based on the relative duration of successive sample periods. The new algorithm is also more careful about how it handles individual pointers going down or up and their effects on the collected movement traces. The intent is to preserve the last known velocity of pointers as they go up while also ensuring that other motion samples do not count twice in that case. Bug: 4086785 Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
2011-03-15 02:39:54 +00:00
ssize_t findPointerIndex(int32_t pointerId) const;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void initialize(
int32_t deviceId,
Add support for new input sources. Added several new coordinate values to MotionEvents to capture touch major/minor area, tool major/minor area and orientation. Renamed NDK input constants per convention. Added InputDevice class in Java which will eventually provide useful information about available input devices. Added APIs for manufacturing new MotionEvent objects with multiple pointers and all necessary coordinate data. Fixed a bug in the input dispatcher where it could get stuck with a pointer down forever. Fixed a bug in the WindowManager where the input window list could end up containing stale removed windows. Fixed a bug in the WindowManager where the input channel was being removed only after the final animation transition had taken place which caused spurious WINDOW DIED log messages to be printed. Change-Id: Ie55084da319b20aad29b28a0499b8dd98bb5da68
2010-07-15 01:48:53 +00:00
int32_t source,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t action,
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
int32_t flags,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t edgeFlags,
int32_t metaState,
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
int32_t buttonState,
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
float xOffset,
float yOffset,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
float xPrecision,
float yPrecision,
nsecs_t downTime,
nsecs_t eventTime,
size_t pointerCount,
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
const PointerProperties* pointerProperties,
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
const PointerCoords* pointerCoords);
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
void copyFrom(const MotionEvent* other, bool keepHistory);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
void addSample(
nsecs_t eventTime,
const PointerCoords* pointerCoords);
void offsetLocation(float xOffset, float yOffset);
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
void scale(float scaleFactor);
#ifdef HAVE_ANDROID_OS
void transform(const SkMatrix* matrix);
status_t readFromParcel(Parcel* parcel);
status_t writeToParcel(Parcel* parcel) const;
#endif
Wake screen from external HID peripherals. Added some plumbing to enable the policy to intercept motion events when the screen is off to handle wakeup if needed. Added a basic concept of an external device to limit the scope of the wakeup policy to external devices only. The wakeup policy for internal devices should be based on explicit rules such as policy flags in key layout files. Moved isTouchEvent to native. Ensure the dispatcher sends the right event type to userActivity for non-touch pointer events like HOVER_MOVE and SCROLL. Bug: 3193114 Change-Id: I15dbd48a16810dfaf226ff7ad117d46908ca4f86
2011-03-03 03:23:13 +00:00
static bool isTouchEvent(int32_t source, int32_t action);
inline bool isTouchEvent() const {
return isTouchEvent(mSource, mAction);
}
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
// Low-level accessors.
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
inline const PointerProperties* getPointerProperties() const {
return mPointerProperties.array();
}
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
inline const nsecs_t* getSampleEventTimes() const { return mSampleEventTimes.array(); }
inline const PointerCoords* getSamplePointerCoords() const {
return mSamplePointerCoords.array();
}
Add support for arbitrary axes in MotionEvents. This change makes it possible to extend the set of axes that are reported in MotionEvents by defining new axis constants. The MotionEvent object is now backed by its C++ counterpart to avoid having to maintain multiple representations of the same data. Change-Id: Ibe93c90d4b390d43c176cce48d558d20869ee608
2011-02-15 01:03:18 +00:00
protected:
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t mAction;
Add support for secure views. Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the input manager whenever another visible window is partly or wholly obscured the target of a touch event so that applications can filter touches accordingly. Added a "filterTouchesWhenObscured" attribute to View which can be used to enable filtering of touches when the view's window is obscured. Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
2010-09-02 00:01:00 +00:00
int32_t mFlags;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
int32_t mEdgeFlags;
int32_t mMetaState;
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
int32_t mButtonState;
Even more native input dispatch work in progress. Added more tests. Fixed a regression in Vector. Fixed bugs in pointer tracking. Fixed a starvation issue in PollLoop when setting or removing callbacks. Fixed a couple of policy nits. Modified the internal representation of MotionEvent to be more efficient and more consistent. Added code to skip/cancel virtual key processing when there are multiple pointers down. This helps to better disambiguate virtual key presses from stray touches (such as cheek presses). Change-Id: I2a7d2cce0195afb9125b23378baa94fd2fc6671c
2010-06-16 08:53:36 +00:00
float mXOffset;
float mYOffset;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
float mXPrecision;
float mYPrecision;
nsecs_t mDownTime;
Add initial API for stylus and mouse buttons. Added the concept of pointer properties in a MotionEvent. This is currently used to track the pointer tool type to enable applications to distinguish finger touches from a stylus. Button states are also reported to application as part of touch events. There are no new actions for detecting changes in button states. The application should instead query the button state from the MotionEvent and take appropriate action as needed. A good time to check the button state is on ACTION_DOWN. As a side-effect, applications that do not support multiple buttons will treat primary, secondary and tertiary buttons identically for all touch events. The back button on the mouse is mapped to KEYCODE_BACK and the forward button is mapped to KEYCODE_FORWARD. Added basic plumbing for the secondary mouse button to invoke the context menu, particularly in lists. Added clamp and split methods on MotionEvent to take care of common filtering operations so we don't have them scattered in multiple places across the framework. Bug: 4260011 Change-Id: Ie992b4d4e00c8f2e76b961da0a902145b27f6d83
2011-05-07 01:20:01 +00:00
Vector<PointerProperties> mPointerProperties;
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
Vector<nsecs_t> mSampleEventTimes;
Vector<PointerCoords> mSamplePointerCoords;
};
/*
* Input event factory.
*/
class InputEventFactoryInterface {
protected:
virtual ~InputEventFactoryInterface() { }
public:
InputEventFactoryInterface() { }
virtual KeyEvent* createKeyEvent() = 0;
virtual MotionEvent* createMotionEvent() = 0;
};
/*
* A simple input event factory implementation that uses a single preallocated instance
* of each type of input event that are reused for each request.
*/
class PreallocatedInputEventFactory : public InputEventFactoryInterface {
public:
PreallocatedInputEventFactory() { }
virtual ~PreallocatedInputEventFactory() { }
virtual KeyEvent* createKeyEvent() { return & mKeyEvent; }
virtual MotionEvent* createMotionEvent() { return & mMotionEvent; }
private:
KeyEvent mKeyEvent;
MotionEvent mMotionEvent;
};
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
/*
Improve VelocityTracker numerical stability. Replaced VelocityTracker with a faster and more accurate native implementation. This avoids the duplicate maintenance overhead of having two implementations. The new algorithm requires that the sample duration be at least 10ms in order to contribute to the velocity calculation. This ensures that the velocity is not severely overestimated when samples arrive in bursts. The new algorithm computes the exponentially weighted moving average using weights based on the relative duration of successive sample periods. The new algorithm is also more careful about how it handles individual pointers going down or up and their effects on the collected movement traces. The intent is to preserve the last known velocity of pointers as they go up while also ensuring that other motion samples do not count twice in that case. Bug: 4086785 Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
2011-03-15 02:39:54 +00:00
* Calculates the velocity of pointer movements over time.
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
*/
class VelocityTracker {
public:
struct Position {
float x, y;
};
VelocityTracker();
// Resets the velocity tracker state.
void clear();
Improve VelocityTracker numerical stability. Replaced VelocityTracker with a faster and more accurate native implementation. This avoids the duplicate maintenance overhead of having two implementations. The new algorithm requires that the sample duration be at least 10ms in order to contribute to the velocity calculation. This ensures that the velocity is not severely overestimated when samples arrive in bursts. The new algorithm computes the exponentially weighted moving average using weights based on the relative duration of successive sample periods. The new algorithm is also more careful about how it handles individual pointers going down or up and their effects on the collected movement traces. The intent is to preserve the last known velocity of pointers as they go up while also ensuring that other motion samples do not count twice in that case. Bug: 4086785 Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
2011-03-15 02:39:54 +00:00
// Resets the velocity tracker state for specific pointers.
// Call this method when some pointers have changed and may be reusing
// an id that was assigned to a different pointer earlier.
void clearPointers(BitSet32 idBits);
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
// Adds movement information for a set of pointers.
// The idBits bitfield specifies the pointer ids of the pointers whose positions
// are included in the movement.
// The positions array contains position information for each pointer in order by
// increasing id. Its size should be equal to the number of one bits in idBits.
void addMovement(nsecs_t eventTime, BitSet32 idBits, const Position* positions);
Improve VelocityTracker numerical stability. Replaced VelocityTracker with a faster and more accurate native implementation. This avoids the duplicate maintenance overhead of having two implementations. The new algorithm requires that the sample duration be at least 10ms in order to contribute to the velocity calculation. This ensures that the velocity is not severely overestimated when samples arrive in bursts. The new algorithm computes the exponentially weighted moving average using weights based on the relative duration of successive sample periods. The new algorithm is also more careful about how it handles individual pointers going down or up and their effects on the collected movement traces. The intent is to preserve the last known velocity of pointers as they go up while also ensuring that other motion samples do not count twice in that case. Bug: 4086785 Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
2011-03-15 02:39:54 +00:00
// Adds movement information for all pointers in a MotionEvent, including historical samples.
void addMovement(const MotionEvent* event);
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
// Gets the velocity of the specified pointer id in position units per second.
// Returns false and sets the velocity components to zero if there is no movement
// information for the pointer.
bool getVelocity(uint32_t id, float* outVx, float* outVy) const;
Improve VelocityTracker numerical stability. Replaced VelocityTracker with a faster and more accurate native implementation. This avoids the duplicate maintenance overhead of having two implementations. The new algorithm requires that the sample duration be at least 10ms in order to contribute to the velocity calculation. This ensures that the velocity is not severely overestimated when samples arrive in bursts. The new algorithm computes the exponentially weighted moving average using weights based on the relative duration of successive sample periods. The new algorithm is also more careful about how it handles individual pointers going down or up and their effects on the collected movement traces. The intent is to preserve the last known velocity of pointers as they go up while also ensuring that other motion samples do not count twice in that case. Bug: 4086785 Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
2011-03-15 02:39:54 +00:00
// Gets the active pointer id, or -1 if none.
inline int32_t getActivePointerId() const { return mActivePointerId; }
// Gets a bitset containing all pointer ids from the most recent movement.
inline BitSet32 getCurrentPointerIdBits() const { return mMovements[mIndex].idBits; }
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
private:
// Number of samples to keep.
static const uint32_t HISTORY_SIZE = 10;
// Oldest sample to consider when calculating the velocity.
Tweak VelocityTracker. Bug: 5265529 Calculate the velocity using the most recent touch sample as the point of reference instead of the oldest. This change more heavily weights recent touch samples and reduces the sample time window used for calculation. This significantly improves the accuracy of fling gesture detection. Change-Id: Ib1940933e786e5f6a731552a99bcd9400741d55f
2011-09-09 22:39:35 +00:00
static const nsecs_t MAX_AGE = 100 * 1000000; // 100 ms
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
// The minimum duration between samples when estimating velocity.
Tweak VelocityTracker. Bug: 5265529 Calculate the velocity using the most recent touch sample as the point of reference instead of the oldest. This change more heavily weights recent touch samples and reduces the sample time window used for calculation. This significantly improves the accuracy of fling gesture detection. Change-Id: Ib1940933e786e5f6a731552a99bcd9400741d55f
2011-09-09 22:39:35 +00:00
static const nsecs_t MIN_DURATION = 5 * 1000000; // 5 ms
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
struct Movement {
nsecs_t eventTime;
BitSet32 idBits;
Position positions[MAX_POINTERS];
Tweak VelocityTracker. Bug: 5265529 Calculate the velocity using the most recent touch sample as the point of reference instead of the oldest. This change more heavily weights recent touch samples and reduces the sample time window used for calculation. This significantly improves the accuracy of fling gesture detection. Change-Id: Ib1940933e786e5f6a731552a99bcd9400741d55f
2011-09-09 22:39:35 +00:00
inline const Position& getPosition(uint32_t id) const {
return positions[idBits.getIndexOfBit(id)];
}
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
};
uint32_t mIndex;
Movement mMovements[HISTORY_SIZE];
Improve VelocityTracker numerical stability. Replaced VelocityTracker with a faster and more accurate native implementation. This avoids the duplicate maintenance overhead of having two implementations. The new algorithm requires that the sample duration be at least 10ms in order to contribute to the velocity calculation. This ensures that the velocity is not severely overestimated when samples arrive in bursts. The new algorithm computes the exponentially weighted moving average using weights based on the relative duration of successive sample periods. The new algorithm is also more careful about how it handles individual pointers going down or up and their effects on the collected movement traces. The intent is to preserve the last known velocity of pointers as they go up while also ensuring that other motion samples do not count twice in that case. Bug: 4086785 Change-Id: I2632321232c64d6b8faacdb929e33f60e64dcdd3
2011-03-15 02:39:54 +00:00
int32_t mActivePointerId;
Use touch pad gestures to manipulate the pointer. 1. Single finger tap performs a click. 2. Single finger movement moves the pointer (hovers). 3. Button press plus movement performs click or drag. While dragging, the pointer follows the finger that is moving fastest. This is important if there are additional fingers down on the touch pad for the purpose of applying force to an integrated button underneath. 4. Two fingers near each other moving in the same direction are coalesced as a swipe gesture under the pointer. 5. Two or more fingers moving in arbitrary directions are transformed into touches in the vicinity of the pointer. This makes scale/zoom and rotate gestures possible. Added a native VelocityTracker implementation to enable intelligent switching of the active pointer during drags. Change-Id: I5ada57e7f2bdb9b0a791843eb354a8c706b365dc
2011-03-10 01:39:48 +00:00
};
Implement pointer acceleration. Bug: 4124987 Change-Id: I1f31a28f1594c55302ccabe13fe3ca6d2ff71d50
2011-06-01 19:33:19 +00:00
/*
* Specifies parameters that govern pointer or wheel acceleration.
*/
struct VelocityControlParameters {
// A scale factor that is multiplied with the raw velocity deltas
// prior to applying any other velocity control factors. The scale
// factor should be used to adapt the input device resolution
// (eg. counts per inch) to the output device resolution (eg. pixels per inch).
//
// Must be a positive value.
// Default is 1.0 (no scaling).
float scale;
// The scaled speed at which acceleration begins to be applied.
// This value establishes the upper bound of a low speed regime for
// small precise motions that are performed without any acceleration.
//
// Must be a non-negative value.
// Default is 0.0 (no low threshold).
float lowThreshold;
// The scaled speed at which maximum acceleration is applied.
// The difference between highThreshold and lowThreshold controls
// the range of speeds over which the acceleration factor is interpolated.
// The wider the range, the smoother the acceleration.
//
// Must be a non-negative value greater than or equal to lowThreshold.
// Default is 0.0 (no high threshold).
float highThreshold;
// The acceleration factor.
// When the speed is above the low speed threshold, the velocity will scaled
// by an interpolated value between 1.0 and this amount.
//
// Must be a positive greater than or equal to 1.0.
// Default is 1.0 (no acceleration).
float acceleration;
VelocityControlParameters() :
scale(1.0f), lowThreshold(0.0f), highThreshold(0.0f), acceleration(1.0f) {
}
VelocityControlParameters(float scale, float lowThreshold,
float highThreshold, float acceleration) :
scale(scale), lowThreshold(lowThreshold),
highThreshold(highThreshold), acceleration(acceleration) {
}
};
/*
* Implements mouse pointer and wheel speed control and acceleration.
*/
class VelocityControl {
public:
VelocityControl();
/* Sets the various parameters. */
void setParameters(const VelocityControlParameters& parameters);
/* Resets the current movement counters to zero.
* This has the effect of nullifying any acceleration. */
void reset();
/* Translates a raw movement delta into an appropriately
* scaled / accelerated delta based on the current velocity. */
void move(nsecs_t eventTime, float* deltaX, float* deltaY);
private:
// If no movements are received within this amount of time,
// we assume the movement has stopped and reset the movement counters.
static const nsecs_t STOP_TIME = 500 * 1000000; // 500 ms
VelocityControlParameters mParameters;
nsecs_t mLastMovementTime;
VelocityTracker::Position mRawPosition;
VelocityTracker mVelocityTracker;
};
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
/*
* Describes the characteristics and capabilities of an input device.
*/
class InputDeviceInfo {
public:
InputDeviceInfo();
InputDeviceInfo(const InputDeviceInfo& other);
~InputDeviceInfo();
struct MotionRange {
Input improvements and bug fixes. Associate each motion axis with the source from which it comes. It is possible for multiple sources of the same device to define the same axis. This fixes new API that was introduced in MR1. (Bug: 4066146) Fixed a bug that might cause a segfault when using a trackball. Only fade out the mouse pointer when touching the touch screen, ignore other touch pads. Changed the plural "sources" to "source" in several places in the InputReader where we intend to refer to a particular source rather than to a combination of sources. Improved the batching code to support batching events from different sources of the same device in parallel. (Bug: 3391564) Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
2011-03-08 23:13:06 +00:00
int32_t axis;
uint32_t source;
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
float min;
float max;
float flat;
float fuzz;
};
void initialize(int32_t id, const String8& name);
inline int32_t getId() const { return mId; }
inline const String8 getName() const { return mName; }
inline uint32_t getSources() const { return mSources; }
Input improvements and bug fixes. Associate each motion axis with the source from which it comes. It is possible for multiple sources of the same device to define the same axis. This fixes new API that was introduced in MR1. (Bug: 4066146) Fixed a bug that might cause a segfault when using a trackball. Only fade out the mouse pointer when touching the touch screen, ignore other touch pads. Changed the plural "sources" to "source" in several places in the InputReader where we intend to refer to a particular source rather than to a combination of sources. Improved the batching code to support batching events from different sources of the same device in parallel. (Bug: 3391564) Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
2011-03-08 23:13:06 +00:00
const MotionRange* getMotionRange(int32_t axis, uint32_t source) const;
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
void addSource(uint32_t source);
Input improvements and bug fixes. Associate each motion axis with the source from which it comes. It is possible for multiple sources of the same device to define the same axis. This fixes new API that was introduced in MR1. (Bug: 4066146) Fixed a bug that might cause a segfault when using a trackball. Only fade out the mouse pointer when touching the touch screen, ignore other touch pads. Changed the plural "sources" to "source" in several places in the InputReader where we intend to refer to a particular source rather than to a combination of sources. Improved the batching code to support batching events from different sources of the same device in parallel. (Bug: 3391564) Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
2011-03-08 23:13:06 +00:00
void addMotionRange(int32_t axis, uint32_t source,
float min, float max, float flat, float fuzz);
void addMotionRange(const MotionRange& range);
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
inline void setKeyboardType(int32_t keyboardType) { mKeyboardType = keyboardType; }
inline int32_t getKeyboardType() const { return mKeyboardType; }
Input improvements and bug fixes. Associate each motion axis with the source from which it comes. It is possible for multiple sources of the same device to define the same axis. This fixes new API that was introduced in MR1. (Bug: 4066146) Fixed a bug that might cause a segfault when using a trackball. Only fade out the mouse pointer when touching the touch screen, ignore other touch pads. Changed the plural "sources" to "source" in several places in the InputReader where we intend to refer to a particular source rather than to a combination of sources. Improved the batching code to support batching events from different sources of the same device in parallel. (Bug: 3391564) Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
2011-03-08 23:13:06 +00:00
inline const Vector<MotionRange>& getMotionRanges() const {
Input device calibration and capabilities. Finished the input device capability API. Added a mechanism for calibrating touch devices to obtain more accurate information about the touch contact area. Improved pointer location to show new coordinates and capabilities. Optimized pointer location display and formatting to avoid allocating large numbers of temporary objects. The GC churn was causing the application to stutter very badly when more than a couple of fingers were down). Added more diagnostics. Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
2010-08-30 10:02:23 +00:00
return mMotionRanges;
}
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
private:
int32_t mId;
String8 mName;
uint32_t mSources;
int32_t mKeyboardType;
Input improvements and bug fixes. Associate each motion axis with the source from which it comes. It is possible for multiple sources of the same device to define the same axis. This fixes new API that was introduced in MR1. (Bug: 4066146) Fixed a bug that might cause a segfault when using a trackball. Only fade out the mouse pointer when touching the touch screen, ignore other touch pads. Changed the plural "sources" to "source" in several places in the InputReader where we intend to refer to a particular source rather than to a combination of sources. Improved the batching code to support batching events from different sources of the same device in parallel. (Bug: 3391564) Change-Id: I0189e18e464338f126f7bf94370b928e1b1695f2
2011-03-08 23:13:06 +00:00
Vector<MotionRange> mMotionRanges;
Refactor input reader to support new device types more easily. Refactored the input reader so that each raw input protocol is handled by a separate subclass of the new InputMapper type. This way, behaviors pertaining to keyboard, trackballs, touchscreens, switches and other devices are clearly distinguished for improved maintainability. Added partial support for describing capabilities of input devices (incomplete and untested for now, will be fleshed out in later commits). Simplified EventHub interface somewhat since InputReader is taking over more of the work. Cleaned up some of the interactions between InputManager and WindowManagerService related to reading input state. Fixed swiping finger from screen edge into display area. Added logging of device information to 'dumpsys window'. Change-Id: I17faffc33e3aec3a0f33f0b37e81a70609378612
2010-07-24 04:28:06 +00:00
};
Improve support for external keyboards. Use Vendor ID, Product ID and optionally the Version to locate keymaps and configuration files for external devices. Moved virtual key definition parsing to native code so that EventHub can identify touch screens with virtual keys and load the appropriate key layout file. Cleaned up a lot of old code in EventHub. Fixed a regression in ViewRoot's fallback event handling. Fixed a minor bug in FileMap that caused it to try to munmap or close invalid handled when released if the attempt to map the file failed. Added a couple of new String8 conveniences for formatting strings. Modified Tokenizer to fall back to open+read when mmap fails since we can't mmap sysfs files as needed to open the virtual key definition files in /sys/board_properties/. Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
2010-12-02 21:50:46 +00:00
/*
* Identifies a device.
*/
struct InputDeviceIdentifier {
inline InputDeviceIdentifier() :
bus(0), vendor(0), product(0), version(0) {
}
String8 name;
String8 location;
String8 uniqueId;
uint16_t bus;
uint16_t vendor;
uint16_t product;
uint16_t version;
};
Support non-orientation aware keyboards and other devices. Fixed a bug with dpad keys on external keyboards being rotated according to the display orientation by adding a new input device configuration property called "keyboard.orientationAware". Added a mechanism for overriding the key layout and key character map in the input device configuration file using the new "keyboard.layout" and "keyboard.characterMap" properties. Also added "trackball.orientationAware", "touch.orientationAware" and "touch.deviceType" configuration properties. Rewrote the configuration property reading code in native code so that it can be used by EventHub and other components. Added basic support for installable idc, kl, and kcm files in /data/system/devices. However, there is no provision for copying files there yet. Disabled long-press character pickers on full keyboards so that key repeating works as expected. Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
2010-11-30 01:37:49 +00:00
/* Types of input device configuration files. */
enum InputDeviceConfigurationFileType {
INPUT_DEVICE_CONFIGURATION_FILE_TYPE_CONFIGURATION = 0, /* .idc file */
INPUT_DEVICE_CONFIGURATION_FILE_TYPE_KEY_LAYOUT = 1, /* .kl file */
INPUT_DEVICE_CONFIGURATION_FILE_TYPE_KEY_CHARACTER_MAP = 2, /* .kcm file */
};
/*
Improve support for external keyboards. Use Vendor ID, Product ID and optionally the Version to locate keymaps and configuration files for external devices. Moved virtual key definition parsing to native code so that EventHub can identify touch screens with virtual keys and load the appropriate key layout file. Cleaned up a lot of old code in EventHub. Fixed a regression in ViewRoot's fallback event handling. Fixed a minor bug in FileMap that caused it to try to munmap or close invalid handled when released if the attempt to map the file failed. Added a couple of new String8 conveniences for formatting strings. Modified Tokenizer to fall back to open+read when mmap fails since we can't mmap sysfs files as needed to open the virtual key definition files in /sys/board_properties/. Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
2010-12-02 21:50:46 +00:00
* Gets the path of an input device configuration file, if one is available.
* Considers both system provided and user installed configuration files.
*
* The device identifier is used to construct several default configuration file
* names to try based on the device name, vendor, product, and version.
*
* Returns an empty string if not found.
*/
extern String8 getInputDeviceConfigurationFilePathByDeviceIdentifier(
const InputDeviceIdentifier& deviceIdentifier,
InputDeviceConfigurationFileType type);
/*
* Gets the path of an input device configuration file, if one is available.
Ensure the ShortcutManager uses the correct key character map. The ShortcutManager used to only receive the key code of the key event that triggered the shortcut. This change now provides the shortcut manager with the whole key event so it can look up the associated character using the correct key character map. To make this more efficient, added a mechanism for recycling key events. At the moment it is only used by key events owned by the system process, since clients of the existing API (such as Views) might continue to hold on to key events after dispatch has finished so they would break if the key event were recycled by the framework. Deprecated KeyCharacterMap.BUILT_IN_KEYBOARD. Change-Id: I4313725dd63f2be01c350c005a41c7fde9bc67e8
2010-11-19 04:53:46 +00:00
* Considers both system provided and user installed configuration files.
Support non-orientation aware keyboards and other devices. Fixed a bug with dpad keys on external keyboards being rotated according to the display orientation by adding a new input device configuration property called "keyboard.orientationAware". Added a mechanism for overriding the key layout and key character map in the input device configuration file using the new "keyboard.layout" and "keyboard.characterMap" properties. Also added "trackball.orientationAware", "touch.orientationAware" and "touch.deviceType" configuration properties. Rewrote the configuration property reading code in native code so that it can be used by EventHub and other components. Added basic support for installable idc, kl, and kcm files in /data/system/devices. However, there is no provision for copying files there yet. Disabled long-press character pickers on full keyboards so that key repeating works as expected. Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
2010-11-30 01:37:49 +00:00
*
Improve support for external keyboards. Use Vendor ID, Product ID and optionally the Version to locate keymaps and configuration files for external devices. Moved virtual key definition parsing to native code so that EventHub can identify touch screens with virtual keys and load the appropriate key layout file. Cleaned up a lot of old code in EventHub. Fixed a regression in ViewRoot's fallback event handling. Fixed a minor bug in FileMap that caused it to try to munmap or close invalid handled when released if the attempt to map the file failed. Added a couple of new String8 conveniences for formatting strings. Modified Tokenizer to fall back to open+read when mmap fails since we can't mmap sysfs files as needed to open the virtual key definition files in /sys/board_properties/. Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
2010-12-02 21:50:46 +00:00
* The name is case-sensitive and is used to construct the filename to resolve.
* All characters except 'a'-'z', 'A'-'Z', '0'-'9', '-', and '_' are replaced by underscores.
*
Support non-orientation aware keyboards and other devices. Fixed a bug with dpad keys on external keyboards being rotated according to the display orientation by adding a new input device configuration property called "keyboard.orientationAware". Added a mechanism for overriding the key layout and key character map in the input device configuration file using the new "keyboard.layout" and "keyboard.characterMap" properties. Also added "trackball.orientationAware", "touch.orientationAware" and "touch.deviceType" configuration properties. Rewrote the configuration property reading code in native code so that it can be used by EventHub and other components. Added basic support for installable idc, kl, and kcm files in /data/system/devices. However, there is no provision for copying files there yet. Disabled long-press character pickers on full keyboards so that key repeating works as expected. Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
2010-11-30 01:37:49 +00:00
* Returns an empty string if not found.
*/
Improve support for external keyboards. Use Vendor ID, Product ID and optionally the Version to locate keymaps and configuration files for external devices. Moved virtual key definition parsing to native code so that EventHub can identify touch screens with virtual keys and load the appropriate key layout file. Cleaned up a lot of old code in EventHub. Fixed a regression in ViewRoot's fallback event handling. Fixed a minor bug in FileMap that caused it to try to munmap or close invalid handled when released if the attempt to map the file failed. Added a couple of new String8 conveniences for formatting strings. Modified Tokenizer to fall back to open+read when mmap fails since we can't mmap sysfs files as needed to open the virtual key definition files in /sys/board_properties/. Change-Id: I6ca5e5f9547619fd082ddac47e87ce185da69ee6
2010-12-02 21:50:46 +00:00
extern String8 getInputDeviceConfigurationFilePathByName(
Support non-orientation aware keyboards and other devices. Fixed a bug with dpad keys on external keyboards being rotated according to the display orientation by adding a new input device configuration property called "keyboard.orientationAware". Added a mechanism for overriding the key layout and key character map in the input device configuration file using the new "keyboard.layout" and "keyboard.characterMap" properties. Also added "trackball.orientationAware", "touch.orientationAware" and "touch.deviceType" configuration properties. Rewrote the configuration property reading code in native code so that it can be used by EventHub and other components. Added basic support for installable idc, kl, and kcm files in /data/system/devices. However, there is no provision for copying files there yet. Disabled long-press character pickers on full keyboards so that key repeating works as expected. Change-Id: I1bd9f0c3d344421db444e7d271eb09bc8bab4791
2010-11-30 01:37:49 +00:00
const String8& name, InputDeviceConfigurationFileType type);
Native input dispatch rewrite work in progress. The old dispatch mechanism has been left in place and continues to be used by default for now. To enable native input dispatch, edit the ENABLE_NATIVE_DISPATCH constant in WindowManagerPolicy. Includes part of the new input event NDK API. Some details TBD. To wire up input dispatch, as the ViewRoot adds a window to the window session it receives an InputChannel object as an output argument. The InputChannel encapsulates the file descriptors for a shared memory region and two pipe end-points. The ViewRoot then provides the InputChannel to the InputQueue. Behind the scenes, InputQueue simply attaches handlers to the native PollLoop object that underlies the MessageQueue. This way MessageQueue doesn't need to know anything about input dispatch per-se, it just exposes (in native code) a PollLoop that other components can use to monitor file descriptor state changes. There can be zero or more targets for any given input event. Each input target is specified by its input channel and some parameters including flags, an X/Y coordinate offset, and the dispatch timeout. An input target can request either synchronous dispatch (for foreground apps) or asynchronous dispatch (fire-and-forget for wallpapers and "outside" targets). Currently, finding the appropriate input targets for an event requires a call back into the WindowManagerServer from native code. In the future this will be refactored to avoid most of these callbacks except as required to handle pending focus transitions. End-to-end event dispatch mostly works! To do: event injection, rate limiting, ANRs, testing, optimization, etc. Change-Id: I8c36b2b9e0a2d27392040ecda0f51b636456de25
2010-04-23 01:58:52 +00:00
} // namespace android
#endif // _UI_INPUT_H
Reference in New Issue Copy Permalink