replicant-frameworks_native/include/gui/IGraphicBufferConsumer.h

291 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_GUI_IGRAPHICBUFFERCONSUMER_H
#define ANDROID_GUI_IGRAPHICBUFFERCONSUMER_H
#include <stdint.h>
#include <sys/types.h>
#include <utils/Errors.h>
#include <utils/RefBase.h>
#include <utils/Timers.h>
#include <binder/IInterface.h>
#include <ui/Rect.h>
namespace android {
// ----------------------------------------------------------------------------
class IConsumerListener;
class GraphicBuffer;
class Fence;
class IGraphicBufferConsumer : public IInterface {
public:
// public facing structure for BufferSlot
class BufferItem : public Flattenable<BufferItem> {
friend class Flattenable<BufferItem>;
size_t getPodSize() const;
size_t getFlattenedSize() const;
size_t getFdCount() const;
status_t flatten(void*& buffer, size_t& size, int*& fds, size_t& count) const;
status_t unflatten(void const*& buffer, size_t& size, int const*& fds, size_t& count);
public:
// The default value of mBuf, used to indicate this doesn't correspond to a slot.
enum { INVALID_BUFFER_SLOT = -1 };
BufferItem();
// mGraphicBuffer points to the buffer allocated for this slot, or is NULL
// if the buffer in this slot has been acquired in the past (see
// BufferSlot.mAcquireCalled).
sp<GraphicBuffer> mGraphicBuffer;
// mFence is a fence that will signal when the buffer is idle.
sp<Fence> mFence;
// mCrop is the current crop rectangle for this buffer slot.
Rect mCrop;
// mTransform is the current transform flags for this buffer slot.
// refer to NATIVE_WINDOW_TRANSFORM_* in <window.h>
uint32_t mTransform;
// mScalingMode is the current scaling mode for this buffer slot.
// refer to NATIVE_WINDOW_SCALING_* in <window.h>
uint32_t mScalingMode;
// mTimestamp is the current timestamp for this buffer slot. This gets
// to set by queueBuffer each time this slot is queued. This value
// is guaranteed to be monotonically increasing for each newly
// acquired buffer.
int64_t mTimestamp;
// mIsAutoTimestamp indicates whether mTimestamp was generated
// automatically when the buffer was queued.
bool mIsAutoTimestamp;
// mFrameNumber is the number of the queued frame for this slot.
uint64_t mFrameNumber;
// mBuf is the slot index of this buffer (default INVALID_BUFFER_SLOT).
int mBuf;
// mIsDroppable whether this buffer was queued with the
// property that it can be replaced by a new buffer for the purpose of
// making sure dequeueBuffer() won't block.
// i.e.: was the BufferQueue in "mDequeueBufferCannotBlock" when this buffer
// was queued.
bool mIsDroppable;
// Indicates whether this buffer has been seen by a consumer yet
bool mAcquireCalled;
// Indicates this buffer must be transformed by the inverse transform of the screen
// it is displayed onto. This is applied after mTransform.
bool mTransformToDisplayInverse;
};
enum {
// Returned by releaseBuffer, after which the consumer must
// free any references to the just-released buffer that it might have.
STALE_BUFFER_SLOT = 1,
// Returned by dequeueBuffer if there are no pending buffers available.
NO_BUFFER_AVAILABLE,
// Returned by dequeueBuffer if it's too early for the buffer to be acquired.
PRESENT_LATER,
};
// acquireBuffer attempts to acquire ownership of the next pending buffer in
// the BufferQueue. If no buffer is pending then it returns
// NO_BUFFER_AVAILABLE. If a buffer is successfully acquired, the
// information about the buffer is returned in BufferItem.
//
// If the buffer returned had previously been
// acquired then the BufferItem::mGraphicBuffer field of buffer is set to
// NULL and it is assumed that the consumer still holds a reference to the
// buffer.
//
// If presentWhen is non-zero, it indicates the time when the buffer will
// be displayed on screen. If the buffer's timestamp is farther in the
// future, the buffer won't be acquired, and PRESENT_LATER will be
// returned. The presentation time is in nanoseconds, and the time base
// is CLOCK_MONOTONIC.
//
// Return of NO_ERROR means the operation completed as normal.
//
// Return of a positive value means the operation could not be completed
// at this time, but the user should try again later:
// * NO_BUFFER_AVAILABLE - no buffer is pending (nothing queued by producer)
// * PRESENT_LATER - the buffer's timestamp is farther in the future
//
// Return of a negative value means an error has occurred:
// * INVALID_OPERATION - too many buffers have been acquired
virtual status_t acquireBuffer(BufferItem* buffer, nsecs_t presentWhen) = 0;
// releaseBuffer releases a buffer slot from the consumer back to the
// BufferQueue. This may be done while the buffer's contents are still
// being accessed. The fence will signal when the buffer is no longer
// in use. frameNumber is used to indentify the exact buffer returned.
//
// If releaseBuffer returns STALE_BUFFER_SLOT, then the consumer must free
// any references to the just-released buffer that it might have, as if it
// had received a onBuffersReleased() call with a mask set for the released
// buffer.
//
// Note that the dependencies on EGL will be removed once we switch to using
// the Android HW Sync HAL.
//
// Return of NO_ERROR means the operation completed as normal.
//
// Return of a positive value means the operation could not be completed
// at this time, but the user should try again later:
// * STALE_BUFFER_SLOT - see above (second paragraph)
//
// Return of a negative value means an error has occurred:
// * BAD_VALUE - one of the following could've happened:
// * the buffer slot was invalid
// * the fence was NULL
// * the buffer slot specified is not in the acquired state
virtual status_t releaseBuffer(int buf, uint64_t frameNumber,
EGLDisplay display, EGLSyncKHR fence,
const sp<Fence>& releaseFence) = 0;
// consumerConnect connects a consumer to the BufferQueue. Only one
// consumer may be connected, and when that consumer disconnects the
// BufferQueue is placed into the "abandoned" state, causing most
// interactions with the BufferQueue by the producer to fail.
// controlledByApp indicates whether the consumer is controlled by
// the application.
//
// consumer may not be NULL.
//
// Return of a value other than NO_ERROR means an error has occurred:
// * NO_INIT - the buffer queue has been abandoned
// * BAD_VALUE - a NULL consumer was provided
virtual status_t consumerConnect(const sp<IConsumerListener>& consumer, bool controlledByApp) = 0;
// consumerDisconnect disconnects a consumer from the BufferQueue. All
// buffers will be freed and the BufferQueue is placed in the "abandoned"
// state, causing most interactions with the BufferQueue by the producer to
// fail.
//
// Return of a value other than NO_ERROR means an error has occurred:
// * BAD_VALUE - no consumer is currently connected
virtual status_t consumerDisconnect() = 0;
// getReleasedBuffers sets the value pointed to by slotMask to a bit set.
// Each bit index with a 1 corresponds to a released buffer slot with that
// index value. In particular, a released buffer is one that has
// been released by the BufferQueue but have not yet been released by the consumer.
//
// This should be called from the onBuffersReleased() callback.
//
// Return of a value other than NO_ERROR means an error has occurred:
// * NO_INIT - the buffer queue has been abandoned.
virtual status_t getReleasedBuffers(uint32_t* slotMask) = 0;
// setDefaultBufferSize is used to set the size of buffers returned by
// dequeueBuffer when a width and height of zero is requested. Default
// is 1x1.
//
// Return of a value other than NO_ERROR means an error has occurred:
// * BAD_VALUE - either w or h was zero
virtual status_t setDefaultBufferSize(uint32_t w, uint32_t h) = 0;
// setDefaultMaxBufferCount sets the default value for the maximum buffer
// count (the initial default is 2). If the producer has requested a
// buffer count using setBufferCount, the default buffer count will only
// take effect if the producer sets the count back to zero.
//
// The count must be between 2 and NUM_BUFFER_SLOTS, inclusive.
//
// Return of a value other than NO_ERROR means an error has occurred:
// * BAD_VALUE - bufferCount was out of range (see above).
virtual status_t setDefaultMaxBufferCount(int bufferCount) = 0;
// disableAsyncBuffer disables the extra buffer used in async mode
// (when both producer and consumer have set their "isControlledByApp"
// flag) and has dequeueBuffer() return WOULD_BLOCK instead.
//
// This can only be called before consumerConnect().
//
// Return of a value other than NO_ERROR means an error has occurred:
// * INVALID_OPERATION - attempting to call this after consumerConnect.
virtual status_t disableAsyncBuffer() = 0;
// setMaxAcquiredBufferCount sets the maximum number of buffers that can
// be acquired by the consumer at one time (default 1). This call will
// fail if a producer is connected to the BufferQueue.
//
// maxAcquiredBuffers must be (inclusive) between 1 and MAX_MAX_ACQUIRED_BUFFERS.
//
// Return of a value other than NO_ERROR means an error has occurred:
// * BAD_VALUE - maxAcquiredBuffers was out of range (see above).
// * INVALID_OPERATION - attempting to call this after a producer connected.
virtual status_t setMaxAcquiredBufferCount(int maxAcquiredBuffers) = 0;
// setConsumerName sets the name used in logging
virtual void setConsumerName(const String8& name) = 0;
// setDefaultBufferFormat allows the BufferQueue to create
// GraphicBuffers of a defaultFormat if no format is specified
// in dequeueBuffer. Formats are enumerated in graphics.h; the
// initial default is HAL_PIXEL_FORMAT_RGBA_8888.
//
// Return of a value other than NO_ERROR means an unknown error has occurred.
virtual status_t setDefaultBufferFormat(uint32_t defaultFormat) = 0;
// setConsumerUsageBits will turn on additional usage bits for dequeueBuffer.
// These are merged with the bits passed to dequeueBuffer. The values are
// enumerated in gralloc.h, e.g. GRALLOC_USAGE_HW_RENDER; the default is 0.
//
// Return of a value other than NO_ERROR means an unknown error has occurred.
virtual status_t setConsumerUsageBits(uint32_t usage) = 0;
// setTransformHint bakes in rotation to buffers so overlays can be used.
// The values are enumerated in window.h, e.g.
// NATIVE_WINDOW_TRANSFORM_ROT_90. The default is 0 (no transform).
//
// Return of a value other than NO_ERROR means an unknown error has occurred.
virtual status_t setTransformHint(uint32_t hint) = 0;
// dump state into a string
virtual void dump(String8& result, const char* prefix) const = 0;
public:
DECLARE_META_INTERFACE(GraphicBufferConsumer);
};
// ----------------------------------------------------------------------------
class BnGraphicBufferConsumer : public BnInterface<IGraphicBufferConsumer>
{
public:
virtual status_t onTransact( uint32_t code,
const Parcel& data,
Parcel* reply,
uint32_t flags = 0);
};
// ----------------------------------------------------------------------------
}; // namespace android
#endif // ANDROID_GUI_IGRAPHICBUFFERCONSUMER_H