* Now it'll refresh mailbox list (left pane) as well.
(With the minimal interval of 30 seconds)
* Always refresh inbox.
(also with the minimal interval of 10 seconds)
* Also make sure the "auto-refresh" won't refresh
non-refreshable mailboxes. (drafts, etc)
Bug 2929889
Bug 2930018
Change-Id: I09452d40aad6008a721cfbc3f491617224d7048f
There were two cases where MailboxFinder responded to updateMailboxListCallback
when it shoulnd't.
- Callbacks for non-target accounts
- Callbacks arrived after the operation is finished
Make sure these callbacks are properly ignored.
Also, make sure startLookup() can't be called more than once.
Change-Id: I823c11ab5f96df4eb84594c08d3325d12319f708
* EAS can send both "simple password" and a non-zero number of
required complex characters; we're supposed to ignore the
complex character requirement in this case
* Force complex characters to zero if password is "simple"
* Update constructor test to check the fix
Bug: 2903349
Change-Id: I3d42bd3c8f3667d8f3027da9e91e0dd18722d9bf
* Clean up Controller.deleteMessage to work with new EmailContent
utility methods, and move out of the UI thread
* Add unit test for Controller.moveMessage
Change-Id: Ic49e2ecc7ef2252dd4d51f4c3b313b936fda78b6
* We can't run the AccountManager functionality of account backup
and restore in the unit tests, because IsolatedContext doesn't
mock the AccountManager; this leads to various NPE's when the
test is run
* These problems started, by the way, when we added POP/IMAP
account integration with AccountManager
* Since the AccountManager side of account backup/restore isn't
tested, we'll skip that part of the process when running unit
tests
Bug: 2873546
Change-Id: I94673913e66722ac70f3c49c51465122e98bf3d9
isEasAccount now uses getProtocol(), so it works even if the hostauth
hasn't been restored yet.
Bug 2929896
Change-Id: Iee902c18ef59680d8a7d4622230489ec7946f38c
Some of the tests run code on the UI thread but check the result
on the test thread, without synchronization, which is wrong.
Mark the fields volatile to fix it.
Change-Id: I917493f10fc9a15da57cfbc1e65e8d8e2cffd850
* Changed our queue from a TreeMap to a TreeSet that uses an easily
testable comparator
* Remove the ugly bit twiddling priority computation
* Test DownloadSet (the logic behind queue ordering, addition,
removal, query, etc.)
Change-Id: Ia8427900b8f39a243a5407349775802d0a4fad4f
The problem is that this test creates a partial account which will be
used by the activity, but the account is picked up by MailService too
(which is probably not intentional), which crashes because the account
is not properly constructed. (empty address)
Bug 2938323
Change-Id: Ie9ba19ebf72431d086014c1dc191a0c71769dea4
Fixed the bug where callbacks for sendPendingMessagesForAllAccounts
are called on a worker threaed.
Change-Id: I28f1424cf67e15abf37c09b68050d1385f9ac3ee
Added RefreshManager, which is responsible for getting refresh requests
from UI and keeping track of what is being refreshed.
Conceptually it's a part of Controller, but extracted for easier testing.
- Now sendPendingMessagesForAllAccounts() is owned by RefreshManager
rather than Controller.
- Also updateMailboxRefreshTime/mailboxRequiresRefresh have been moved
in from the Email class.
- Now MessagingException implements a method to return an error message
for the UI.
The refresh button on 2-pane doesn't work as intended yet, because the
spec is a bit too complicated (as described in the TODO in
MessageListXLFragmentManager.onRefhres()).
This change touches many file mostly because it cleans up a lot
of code duplication.
Change-Id: I058ab745ccff10f6e574f6ec4569c84ac4a3e10e
Some tests create mock controllers. They register themselves to
MessagingController when instantiated, but never unregister.
Added a cleanup method, and call it for each instance.
(I was hoping it would spped up unit tests, but it didn't. Still
it's a nice thing to do.)
Change-Id: Ia90f0380aef388d22f7cfcf6e9203e05444b3285
Merge commit 'a30631da1cae25be3f75137133297e30cef2db9c' into gingerbread
* commit 'a30631da1cae25be3f75137133297e30cef2db9c':
Clear password related policies in PolicySet when p/w not required
- Now MessageListFragment uses loaders to load data.
- Now that we use Loader's auto-requery with throttling,
removed the throttling timer from MessagesAdapter.
- Simplified footer mode. (now only "no footer" or "load more")
- Removed saving/restoring list state code.
These method don't really look like working, or at least
not always working. Now that UI's lifecycle is changing,
we'd better redo it from scratch.
- Removed MessageListUnitTests.
It only has tests for onSaveInstanceState/restore of the fragment,
which I virtually disabled.
And minor clean-ups
- Moved the code to save/restore selected state from the fragment
to Adapter.
Bug 2911766
Bug 2897500
Change-Id: I16c7aefecc5409c57fc5fc8c59b5c80d9b7fc164
Apparently IMAP servers may return multiple SEARCH responses for a
single SEARCH command, and we need to handle all of them.
Before the IMAP rework there was 3 methods that issued the SEARCH command.
Two of them ware doing it right, but the other wasn't, which was what
I copied from, unfortunately!
In case you're wondering, originally the test for this method was done through
upper methods, e.g. getMessage().
Bug 2911647
Change-Id: Ia50072944d5b01c1e59541c3a966067b13910cc4
- mConnection.destroyResponses() should be protected with
if (mConnection != null).
When we get an IOException, we close the connection and null it out in
ioExceptionHandler(). So mConnection can be null at any point after
where ioExceptionHandler() first appears.
- ioExceptionHandler should close its parent ImapFolder only if the argument
connection is mConnection.
Methods like exists() may pass an ImapConnection which is not mConnection
to ioExceptionHandler. In which case we don't have to close the ImapFolder.
Bug 2898211
Change-Id: I8f9f45d91f596bb8da1a1575593e652d66deb643
Fix for crashes caused by an incomplete account
which typically a crashed unit test leaves behind.
- "Delete account" now works for incomplete accounts
- AccountBackupRestore won't crash.
Change-Id: Ie235aa15cf9b970fd184c60f14406aa7353c6f00
This is phase 1, which simply replaces the phone UX with a fragment-based
equivalent. A subsequent CL will convert it to a large-format multi-pane
version.
Also fix a latent bug in the signatures of the Incoming & Outgoing
settings, both in the reflection code and in the proguard flags.
Change-Id: I86e857af8b9573c0d6070bb21053ce65bb7fe8a0
It's the int version of getFirstRowLong.
Because getFirstRowLong returns a Long as opposed to a long, and the return
value can be null, it's a pain to cast to Integer. So added this variant.
Change-Id: I2a3190e49db480e6d594be4b1fcef9a71e56cb2f
- Fixed account selector default account look-up
- Renamed MessageListFragment.onRestoreInstanceState
to loadState.
(Activity.onRestoreInstanceState is called after onStart,
but this one is called in onCreate, so it wasn't a good
idea to use the same name.)
- Changed mailbox cursur requery timeout to 3 seconds
- Added some TODOs.
Change-Id: Ia2242cd9f74936d24756b800eacd126958eed330
* In particular, "Africa/Casablanca" has DST in 2010 now, so it can't
be used as a test for non-DST time zones
Bug: 2882900
Change-Id: I3026ae4816fc068bd6c783fa3ca879666e796fc9
* In a recent change, we mistakenly removed the logic for handling
too-long inactivity timeouts; we should just fall back to the maximum
since this is stricter than what we're being asked to enforce
* Restore this logic and update the unit test
* The regression was caused by change Ida5663a9, to wit:
Backport: Handle "Allow non-provisionable devices" properly
Bug: 2886746
Change-Id: I99cf9a37441b80477cc1c2c7ec2a78f8a14a83da
- Use trrigers to keep them up-to-date.
- Batch-update them upon upgrade.
- Motivation:
On the mailbox list, we show the number of messages in trash/drafts.
We currently do this with count(*) on the fly, which is okay
because MailboxList is really shown right now.
However, on the 2 pane, it's always shown and constantly refreshed,
so the use of count(*) can be a huge penalty.
It also make the code significantly simpler.
Change-Id: I26efa238d5183df43420a65925876248ef6c6cb6
Break MessageViewFragment up into two fragments, MessageViewFragment, which
is used to show regular messages, and MessageFileViewFragment, which shows
EML messages. (And their base class, MessageViewFragmentBase.)
MessageViewFragmentBase's javadoc has a class diagram.
MessageViewFragment is actually named MessageViewFragment2 at this point
so that GIT correctly finds out the rename from MessageViewFragment to
MessageViewFragmentBase. I'll rename it back in a following CL.
Also added very basic unit tests for MessageView and MessageFileView.
At this point, they just make sure the activities really open and show
messages without exceptions.
I feel like the current naming schema for the activities/fragments is
kinda confusing. Let me know if you come up with better names.
Change-Id: Iff948f4b68cfdb7c1e68f225927b0ce58d34766b
The logic came from ProviderTestCase2, but it can be used with other
kind of test cases, such as InstrumentationTestCase.
Extracted from an existing class. We'll need it for new activity tests.
Change-Id: I5741f01d4749fd397704cef330082470f6051bcf
This new class MailboxFinder is responsible for looking for a mailbox
by an account id and a mailbox type.
If a mailbox is not found on the first try, it'll tell Controller
to refresh the mailbox list, and try again later.
This will be used by MessageListXL.
Change-Id: I4adc3db025fb271c254aa2b58b3b753281dc7398
The problem was that we didn't close the LocalStores created in these
testDbUpgradeXxx tests.
Also,
- Make sure to close databases.
- Make sure to close cursors.
- Cleard up warnings (unnecessary casts, etc.)
Bug 2859264
Change-Id: Ifaddbb6cf07794a7b5978564ea8fbb3cbf75b978
- Added unit tests
- I see the "open a cursor, move to the first row, read a column" pattern over
and over. Added a utility method for this. (Let's try not to bloat the
binary by copying code around!)
- Added helper classes for database related tests
- Removed code dup
Change-Id: I380959215cc1661b252158f0f6e35369b499cdf8
There are two major, interrelated parts to this CL:
1) Clean up the activities to reduce the use of Intents to pass
information between activities; instead, we use a common
SetupData structure that automatically saved/restored as necessary
during the setup flow. A fair amount of code and inconsistent
use of Bundle extras has been eliminated in the process.
* Create SetupData structure, setters/getters, and initialization
methods to simplify the preservation of state during setup flow
* Remove all state/flow extras from Intents; Intents now only
specify the Activity to be started, which should greatly simplify
the transition to Fragments.
* Remove all state/flow fields from Activities
* Modify existing setup activity unit tests and confirm tests pass
2) Create AccountManager accounts for POP/IMAP email accounts to
provide consistency in user experience. Also, internal flows are
now identical as between account types.
* Move account reconciliation from SyncManager to MailService, so
that reconciliation is consistent between email and exchange
accounts; move unit tests as appropriate
* Add a "Sync Email" setting for POP/IMAP/EAS
* Change MailService to respect the "Sync Email" setting in
Settings -> Accounts & sync
* Create PopImapSyncAdapterService to handle manual POP/IMAP sync as
requested by SyncManager; add EmailSyncAdapterService to perform
the same function for EAS
* Use new PopImapAuthenticatorService to add AccountManager accounts
for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest
and add related xml files
* Update AccountSettings to use SetupData
Miscellaneous other changes:
* Only allow valid port numbers in incoming/outgoing setup
Bug: 1712475
Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
* Backport from master branch
* Send policy key of "0" when validating; this gets us the policies
even if "Allow..." is enabled (currently, we simply don't see the
policies)
* If we don't support all of the policies, send back the response
code indicating support for partial support. If we get a positive
response back, then we're good to go - the server allows devices
with partial support. Otherwise, we fail as we always have - with
the toast indicating that the device doesn't support required
policies
* Remove PolicySet.isSupported() and ensure proper field ranges
within the constructor
* Update tests as appropriate
Bug: 2759782
Change-Id: Ida5663a9b35c75ecc61a5f442be0bd60b433cb73
* Add this to processSourceMessage in the reply/forward cases
* Add unit tests for reply and forward case
Bug: 2734321
Change-Id: I6be8383fe5f217a4bda8e669cb69f439bc8e96b6
* Handle status 5 for Ping command (heartbeat of out range)
* Write unit test for heartbeat reset
Bug: 2834195
Change-Id: Ic7952a4b296cf15c6ba895d6579fe7956b171e5b
Introducing MessageOrderManager which maintains a message list for
MessageView. It's used to tell if there is newer/older messages
in a mailbox, and the id of them.
Also, slightly related to this, moved mWaitForLoadMessageId to
ControllerResults where it should belong.
Change-Id: I84e32180c7e84a317f2204bb10ad7245ec022dca
- These tests will probably not make sense with the upcoming UI change.
- Moved testAttachmentWritePermissions to UtilityUnitTests.
It's a test for createUniqueFile, which is now owned by Utility.
- Removed Long.MIN_VALUE hack from MessageView.
New tests should have something better.
Change-Id: I9a09e5e8080a165b010607d1fa3112bcaaab4f90
* Created MockProvider that can be used for testing the results of
ContentProviderOperation's for Calendar/Contacts (we can't use these
within our mock contexts because we can't instantiate the provider
classes within the Email package)
* Wrote some unit tests for MockProvider
* Use MockProvider to test addEvent, in particular how a user's attendee
status is stored, depending on whether the event is new or updated
Change-Id: I97f02d125eb7347726261e12ce70aadc539be1d4
* We need to include the intro text (--Original Message--, etc.) to
SmartForwards, and somehow this got in a past updat
* Add unit test for forwarding
* Fix unit test for reply so that it works localized
Bug: 2477988
Bug: 2685784
Change-Id: I8d92f00d37a434840ec3eb237f3901cd5dc7ad09
* We inadvertently broke this with a recent update that uses Uri
encoding for ItemId and CollectionId in SmartForward/Reply commands.
We need to allow colon (:) however for EAS 2.5; otherwise, sends
fail with HTTP 500
* Update unit test
Bug: 2821684
Change-Id: Ia6bdd2169513d1c13a8174dd599477a35df950f2
- Removed dead code/dead comment.
- Moved static utility methods to Utility.
- Renamed some methods.
- Changed the timing to call super methods.
Also:
- Internationalized formatSize()
- Added unit tests for createUniqueFile() and formatSize()
- createUniqueFile now uses File.createNewFile() instead of exists().
Change-Id: Ibc30e15b029ed5088954bd6fc9032e25dddf176e
* The code assumed that all accounts used the scheduler in MailService
whereas only those using MessagingController do so (i.e. EAS does
not)
* Change setupSyncReportsLocked to set the syncInterval for accounts
that don't use MessagingController to Account.CHECK_INTERVAL_NEVER
* Add unit test for the changed code
Change-Id: I74a3dae21d9ec16f9903bdf2a1c28092ae89cc50
* We need to encode the itemId and collectionId for SmartForward and
SmartReply
* Add unit test for the fix
* Small change + test to EasSyncService usage of URI encoding to use
a non-deprecated method
Bug: 2787725
Change-Id: I428b308b56cc359b8cdd9e42bc3f42c65b6797dc
* Use the new Account.getProtocol() method to determine whether an
Account "isMessagingController" (i.e. uses the legacy controller)
* Cache the result of this test, so that it's only done once per
Account
* Add unit test
Change-Id: I6a0ec789a84bdf30b55156e6337a627fb4e81a08
* We weren't sending the proper protocol version to GAL search, which
causes errors when using 12.1
* The simple fix is to send the agreed upon protocol version, instead
of the default (which is 2.5)
* Replace parsing of protocol version with lookup
Bug: 2793588
Change-Id: Ib2a255d8467004ce985d2d688b37066e1e09d78a
* Minimum complex characters
* Password history (i.e. disallow re-use of past n passwords)
* Password expiration
* Password expiration is NOT yet supported in the framework; there
is a TODO in this CL and a trivial change will be needed when
support arrives; for now, we report this as unsupported
* The two implemented policies are testable
Change-Id: I477adbc000577c57d1ab1788378c97a60018c10c
* Add intent filter for application/eml and message/rfc822 mime types,
launching MessageView with a Uri
* Modify loadMessageTask to handle the Uri by parsing the attachment's
input stream with Pop3Message.parse(), and then creating an
EmailProvider message in a special Mailbox created to hold
"attachment" messages
* Delete all "attachment" messages after the parent message is closed
* Add unit tests
Change-Id: I20276ee006b9f05b889f3c808d3dc407cde26d49
* Introduce AccountFolderListFragment and its layout
* Extract all list-related UI into it
* Fix leaking cursor in AccountsAdapter and add unit test
Change-Id: Ica566847d97927b736f515d434c6691c82343290
* Send policy key of "0" when validating; this gets us the policies
even if "Allow..." is enabled (currently, we simply don't see the
policies)
* If we don't support all of the policies, send back the response
code indicating support for partial support. If we get a positive
response back, then we're good to go - the server allows devices
with partial support. Otherwise, we fail as we always have - with
the toast indicating that the device doesn't support required
policies
* Remove PolicySet.isSupported() and ensure proper field ranges
within the constructor
* Update tests as appropriate
Bug: 2759782
Change-Id: I5f354a0e2d81844aff75d8a8a6de3b97f0020c1f
- Extracted MessageListFragment out of the MessageList activity.
- This is basically pure extraction, with the following conceptual change.
- Now the MessageList activity doesn't know the mailbox id or
the account id. If it needs these ids, it needs to ask the fragment.
- MessageListFragment.LoadMessagesTask tries to determine the account ID
if it's unknown.
Most code in MessageListFragment is directly copied from MessageList
with minimal changes (e.g. pass mActivity instead of 'this' as a Context).
There's a few cleaning up oppotunities. I'll work on them later in a separate
CL.
Change-Id: Ie004cc49b429f2cd8f9de73df5abb94f3054ea0a
* Test for creation of a typical event
* Test for creation of an event with redacted attendees
* More to come
Change-Id: Ica117cd20a9e270ffe49efed75607e92b4d8ac90
One thing that bothers me regarding the new ImapStore is that there is no
tests to verify if the way how getImapId() uses a vendor policy hasn't changed.
This part is hard to test with a real vendor policy, and it can easily be
overlooked even if it's broken.
This CL offers ImapStoreUnitTests a way to test the interaction between
getImapId() and a vendor policy.
Also fixed a bug in VendorPolicyLoaderTest where it assumed the test apk
package name is "com.android.email.tests", but it may actually be
"com.google.android.email.tests" now. (Broken since the test makefile
used inherit-package.)
Change-Id: I8feb616ea28cb5cae5b4fba57e363771014ac599
This fixes the following exception.
java.lang.UnsupportedOperationException
at android.test.mock.MockContext.getApplicationContext(MockContext.java:82)
Bug 2725552
Change-Id: Iaca177defe5f5e836211c58270379da056fa64e0
- Replace string literals in ImapStore with constants.
- Simplifies ImapStore.en/decodeFolderName
- Mix cases in the test data to test for case-insensitivity
Change-Id: I88424357227bcf78528df5e6a1c4ba45d54cc65b
- Almost completely re-wrote ImapResponseParser layer
- We no longer use simple ArrayList and String to represent
imap response. We have classes for that. (Type safe!)
These classes are also NPE-free.
(which isn't necessarily a good thing, though)
- A lot of clean-ups and fixes in ImapStore.
- More tests for ImapStore.
Now ImapResponseParser moved to com.android.email.mail.store.imap.parser,
but inside, it's 99% new code.
This CL introduces many new classes, but most of them are small classes
to represent the IMAP response.
Problems that this CL fixes includes:
- Special characters in OK response
- Handling BYE response
- Case sensitivity
- ClassCast/ArrayIndexOutOfBound/NumberFormatException
- Handling NIL/literals at any position
Bug 2480227
Bug 2244049
Bug 2138981
Bug 1351896
Bug 2591435
Bug 2173061
Bug 2370627
Bug 2524881
Bug 2525902
Bug 2538076
Change-Id: I7116f57fba079b8a5ef8d5439a9b3d9a9af8e6ed
