* Get rid of old Account.getxxxFolderName() calls.
* Clean up any call sites to them
* Properly rename the existing special folder name identifiers
* Use a hash table in MessagingController to improve identification
of special folders for IMAP accounts
* Fix a bug in Controller, which was creating new server-side folders
using localized names.
* Fix a bunch of code in Controller that was using mContext, instead of
using mProviderContext to support testability.
* Fix broken unit tests in ControllerProviderOpsTests
Fixes bug 1904373
* Write unit test to replicate failure(s) in POP3 use of parseInt. All
calls to parseInt must be guarded by try/catch NumberFormatException.
* Fix the failures
Bug # 2115586
* Check for existing accounts with matching servername + username
* Show a dialog and block account creation
* Triggers in three cases:
* After input of an auto-setup account (e.g. Gmail or AOL)
* After input of manual setup (incoming) parameters
* After changing incoming parameters of *any* existing account
* Made some notes in EmailContent regarding fields in HostAuth that we
are not actually using.
* Added HostAuth unit tests
Primarily fixes bug # 1964449
Bonus fix for bug # 1594408
Change-Id: I49310faf6654280582e0ab3d3e40f2701bfcd21d
* SmartForward and SmartReply are EAS commands that automatically
include the original message and, if a forward, all original
attachments, regardless of whether they've been downloaded to
the device
* Both commands improve battery life by sending less data; greatly
so for SmartForward if there are attachments
Change-Id: I12432cd5275a3b54e9a80d5cd59da437c4a086cc
* Move creation of final reply/forward text (i.e. new text plus
the original) to Rfc822Output, where it belongs.
* Prepares the way for use of SmartForward/SmartReply in
Exchange and replying w/ multipart/alternative in SMTP
* Moved test from MessageCompose to new Rfc822OutputTests, and note
that new tests should be added (this is not a regression; there
were never enough tests here)
Change-Id: Ibefb842f47cc9223714856d99b8d4f55b55f49e3
* Define new message-loaded state "FLAG_LOADED_DELETED" (used only for
POP3, which needs to write sentinel messages that are not displayed.)
* Also renamed the other flags to make the naming more consistent.
* Tweak MessageList query generation to inhibit display of deleted
message sentinels, and MessagingController won't try to resync them.
* Clean up implementation of Controller.deleteMessage()
* Add support for move to trash to MessagingController. This operates
in three primary modes:
* POP3 local delete (no server-side interaction)
* POP3 server delete
* IMAP server delete (and copy to IMAP trash mailbox)
* Add missing implementation in provider to delete all of the attachments
for a given message
* Fix progress reporting in activities (the test for error vs. progress
was inverted, which caused progress indicators to keep spinning
after errors.)
* Fix broken account settings UI (POP3 delete policy was not persisting)
Addresses bug 2097409
TODO delete from trash / empty trash
Change-Id: I00188e6dc2093823106e009f35b68c760227c9e6
* Fixes 2048663, 2025029, and 2100131
* Add "Trust Certificates" checkbox in EAS account creation
* Use custom ClientConnectionManager for HttpClient with registry
for plain, ssl, and tssl (trusted ssl) connection
* Use a ConnectionPool for HttpClient connections
* Remove "Domain" checkbox in EAS account creation
* Remove tests related to the "Domain" field
* TODO Write a test for valid usernames (requires a bit of research)
<name>, <email address>, <domain>/<name, and <domain>\<name> are all
valid, but there might be others
Change-Id: I4a0338df5960bfd3d679a88aaf22d1c49f49992b
* Set reply/forward flag and sourceKey as appropriate in MessageCompose
* Update provider tests accordingly
Change-Id: I7f49d80a735314a1a38f09fbf1f234257c41af8c
* Also create a bogus account if none exists to prevent setup failure
* Fixes#2087413 (Email large tests failing with Unknown URI)
* Fixes#2097361 (Duplicate email address when replying...)
Change-Id: I9ca2ac5f98db43e9009c22421c69956440356e34
* Use concrete declarations, not the old sample code
* Remove unused "sample" code
* Create ExchangeSender.java
* Strip out the unused (old sample code) parts of ExchangeStore.java
* Unit test to make sure EAS is being offered
* Fix "account leak" in AccountSettingsTests
This was triggered by donut bug # 2092944 but the solution is
different because we support EAS here.
* Add reply columns to Body
* Remove a bunch of unused columns from Message
* Update SQL tables, content read/write, etc.
* Small tweaks to app code that was not-really-using the old columns.
* Update existing unit tests for new/changed columns
* Disable TagsTests to solve a tests failure (prexisting, not caused by
this CL)
Change-Id: Ief493796dfe219669755170d76786f91570cbb9b
It was broken by CL 22378.
The bug was in the situation when "==" (two padding chars) were at
the end, the reading did not stop after the first '=',
and thus one more char of output was generated.
Add more unit-test for base64 decoding.
* Add \FLAGGED support to IMAP (writeback)
* Add code in Controller to kick MessagingController
* Rewrite pending commands system to scan through provider's updated
messages table and react
* Fix a unit test that I broke
* Cleaned out some of the old PendingCommand support
Addresses the 2nd half (upsync) of bug 1904385
TODO:
Can I add a unit test for IMAP flag writer?
Change-Id: I5a96a695d4f35fca1395506f165b86d9fb19b543
- fix bug 2080075, reply to message without text body.
- workaround bug 2077496 by temporarilly disabling the address adapter.
- unit test for MessageCompose.buildBodyText()
- use precompiled regex
* Refactor the sync adapters to separate out parsing from commit
* Use ContactsProvider to save the SyncKey for contacts
* Fixes#2072664 and #2072456
Change-Id: I1e85c498496e83d9523489636a75f366f7fbd106
* Finish IMAP/POP sections of Controller.sendMessage
* Rewrite MessagingController.sendPendingMessagesSynchronous
* Add deleteAllAttachmentFiles to AttachmentProvider, and unit test
* Rework sendMessage callbacks and integrate into MessageList UI
* Send pending from UI
TODO:
* Find other places from which to call deleteAllAttachmentFiles
* Message, etc. could be added, if this had a use case
* Unit test added for both Account and Mailbox cases
* Eclipse changed some parens around; it won't happen again
* Handle messages >25k
* When structure is available (e.g. IMAP) pull in the entire body
and the list of attachments
* When structure is not available (e.g. POP) pull in a large chunk of
the body to try and capture the message body at least.
* Implement loadAttachment for IMAP/POP to demand download large items
* Tested with IMAP & POP messages
INCOMPLETE (file bugs):
* implement logic for the old loadMessageForView calls that comes from
MessageView (when you open a message that's partially-loaded)
* Resolve handling of mimetype when attachment info is read (currently
we're assuming base64 in a couple of places)
* delete account => delete attachments
* delete attachment => delete file
* create account => clear existing attachments for acct id
* Reset DB version to "1"
* Added field and support code (save, restore, & parcel)
* Added forgotten mProtocolVersion to parcelable code
* Added unit test for parceling
Also, fixed race condition in SyncManager that was underlocking the
wake locks during tests.
- plus unit tests.
- and some attachment refactoring.
- move PROJECTION_ID up to EmailContent.
- add index on messageKey to Attachments and Body tables.
- add missing Columns.ID field in EmailContent.
* Change Sender definition (remove old Message from API) and update
any existing calls through that API
* Rewrite SMTPSender to use provider messages
* Add attachments to RFC822Output
* Minor bugfixes in RFC822Output
* Unit tests
IMAP messages up to about 25k will be downloaded properly.
* Move Store->Provider message rewrite code to a separate utility.
* Add code to descend a Store message and write provider attachments.
* Unit test basic IMAP attachment handler
TODO:
* handle large IMAP messages.
* unit test for POP
* unit test for large IMAP messages
* Remove all use of Strings in favor of the parser's static final int's
* Strings remain in Tags for debugging output only
* Renamed lots of classes to be more consistent
* Centralized logging behavior in Eas class
* Found and fixed some bugs in the process:
- Account deletion wasn't removing HostAuth's correctly in the trigger
- Adding a second EAS account was trashing the first one
- Fixed looping sync behavior caused by Exchange 2003 bug
* Triggers added for insert/delete/update of Message
* update of Mailbox will never set unreadCount
* Removed old test for unread counts and replaced with on
that tests trigger operation.
* Remove Account.updateUnreadCount (deprecated)
* Modify to work with ContactsProvider2
* Modify to work with system AccountManager
* Modify to work with system SyncManager (for triggering user-change syncs)
* Sync server->client for adds/deletes implemented (CP2 doesn't handle delete yet)
* Sync server->client changes handled efficiently (only write changes)
* Some fields still not handled
* Rewrote most of the CPO code to handle server->client changes
* Sync client->server works for supported fields
* Change service API to allow caller to supply complete target path/file
* Also allow caller to supply the final content_uri
* In MessageView, use full integration with EAS service API and
attachments content provider to enable:
* Save: Only works on SD card
* View: Works w/o SD card using content provider & intents
* Thumbnail previews
* Rewrite internals to use EmailProvider instead of raw db access
* Minor changes to APIs as necessary (and scattered changes to follow)
* Convert unit tests and check them
No change in functionality. Just getting a test infrastructure in place
before rewriting to use new EmailProvider. Provides tests for:
* get type (raw & thumb)
* open file (raw)
* open file (thumb)
* query
* resolveAttachmentIdToContentUri
