* When the UI indicates that security policies for a particular
account are now in force and releases the security hold (a bit
in the Account flags), we release any syncs that had been
waiting due to security errors
* Clean up code related to sync holds
* Add unit test for sync hold release
* Add support for server-directed remote wipe
Change-Id: I6209f75e4b57c850ae1ac27f407630c9c740514f
* Add hold flag to Account flags
* Add code to set it (when EAS reports policy failure)
* Add code to clear it when we see changes from the device admin side
* unit tests
This should be sufficient to restart sync of an account which is on hold
due to security policy requirements. Note, this is considered a "retry",
and if the account still does not meet requirements for some reason, it
is expected that EAS sync will call policiesRequired() again.
* Create notification to display when syncs fail due to security
* Create psuedo-activity (no UI) to manage device admin state transitions
* Clean up and flesh out SecurityPolicy APIs'
* Add placeholders in EasSyncService showing how to react when policies
are not met and sync cannot continue.
Note: There are some STOPSHIP todo's at the top of SecurityPolicy.java.
These should explain any code that you might think is "missing".
* Create full TZI strings for upload of events (previously, we
omitted DST information)
* Add documentation to some unit tests
* Put in correct logic for determining if upload needed
* Fix problem w/ parsing empty tags
Change-Id: I268ce8a2db30b3cfdf0e44f6a78befd6bd933243
remove-exchange-support.sh makes it possible to build the email app without
exchange support.
This script:
- removes all packages under com.android.exchange.
- removes all lines surrounded by EXCHANGE-REMOVE-SECTION-START and
EXCHANGE-REMOVE-SECTION-END
And the resulting source should still build and run fine.
Bug: 2369784
New behavior:
* There are two primary paths through this activity:
* Edit existing:
* Load existing values from account into fields
* When user clicks 'next':
* Confirm not a duplicate account
* Try new values (check settings)
* If new values are OK:
* Write new values (save to provider)
* finish() (pop to previous)
*
* Creating New:
* Try Auto-discover to get details from server
* If Auto-discover reports an authentication failure:
* finish() (pop to previous, to re-enter username & password)
* If Auto-discover succeeds:
* write server's account details into account
* Load values from account into fields
* Confirm not a duplicate account
* Try new values (check settings)
* If new values are OK:
* Write new values (save to provider)
* Proceed to options screen
* finish() (removes self from back stack)
* Added unit test for new loadFields method
Bug: 2412300
* Create unit test to reproduce crash
* Fix handling of empty bundle (the default return value)
* Clean up some exception handling in the policy module loader, which
reduces some unneeded logging.
Bug: 2413388
* Begin wiring into system DevicePolicyManager requirements
* Semi-real implementations of isSupported() & isActive()
* Added new API (placeholder) updatePolicies()
* Updated existing unit tests as needed
Bug: 2387961
* scrub all external strings to keep them compliant for IMAP protocol
* move Build.MODEL to x-android-device-model
* send x-android-mobile-net-operator
* send AGUID
* unit tests for above
* retrieve providers from VendorPolicyLoader
Bug: 2332183
Moved Eas.ACCOUNT_MANAGER_TYPE to Email.EXCHANGE_ACCOUNT_MANAGER_TYPE.
This constant is not related to the exchange protocol, and referred in
a lot of different places. Moving it out of the package will make it a lot
simpler when removing exchange dependency.
What should be working:
* Events sync down from server and appear in calendar
* Recurrences and exceptions appear in calendar
* Changed events on server should be reflected in calendar
* Deletions on server should be reflected in calendar
* Push of new/changed/deleted events should work
* Changes on device are NOT synced back to server
* New, single events on device are synced back to server
(no time zone, attendee, or recurrence support)
* Checkbox for syncing calendar added to setup flow
* System sync glue in manifest, etc.
* Bugs are to be expected
* A few unit tests; needs more
Change-Id: I7ca262eaba562ccb9d1af5b0cd948c6bac30e5dd
- Dynamically switch to the alternate exchange strings to substitute overlays.
- Added the mechanism to load the "vendor policy", which tells you when the
alternate strings should be used.
Bug: 2382710
Merge commit '08d92ebf4722e45216ee225775a3b86f9ceecc0d'
* commit '08d92ebf4722e45216ee225775a3b86f9ceecc0d':
Trim the mime type portion of Content-Type.
* AccountSetupExchange defaultly tries using EAS AutoDiscover, which isn't
appropriate in the unit test setting
* Add an Intent extra to disable AutoDiscover and use it in unit tests
Bug: 2382368
Change-Id: I3d4e8d7194b02da44ad583da0cf2fe60ffb19311
* Add IMAP ID command to all login sequences
* Send generic information for now
* Explicitly catch & discard parsing errors, since we really don't
care if the command succeeds or not.
* Unit tests
Bug: 2332183
* Upgrade accounts table to add security column
* Read/Write new column
* Backup/Restore new column
* Unit tests for all of the above
* First cut at defining bitfields (non-binding, just putting down ideas)
Bug: 2387961
* Followup to 85d765f4
* Workaround for (HTC bug: 2275383) & (Moto bug: 2226582)
* Restores mSyncKey as null instead of empty string, which is how
a new account is initialized. Bug: 2385980
* Cleanup synchronized logic in backup & restore
* Minor cleanups & improved comments
Cherry-picked from master d612717340
* Followup to 5e91cccd
* Workaround for (HTC bug: 2275383) & (Moto bug: 2226582)
* Restores mSyncKey as null instead of empty string, which is how
a new account is initialized. Bug: 2385980
* Cleanup synchronized logic in backup & restore
* Minor cleanups & improved comments
* Workaround for (HTC bug 2275383) & (Moto bug 2226582)
* Adds checkpoints for backing up and restoring accounts
* Uses legacy Account / prefs to back up accounts - this is because
some of this code will be reused for legacy account migration
* Unit tests of Account & LegacyConversions
* Unit tests of backup & restore
* Not done: testing of EAS/Account Manager interface (this will require
deeper dependency injection, to avoid the embedded calls to the Account
Manager and other system services.)
Cherry-picked from master 5e91cccd4b
* Workaround for (HTC bug 2275383) & (Moto bug 2226582)
* Adds checkpoints for backing up and restoring accounts
* Uses legacy Account / prefs to back up accounts - this is because
some of this code will be reused for legacy account migration
* Unit tests of Account & LegacyConversions
* Unit tests of backup & restore
* Not done: testing of EAS/Account Manager interface (this will require
deeper dependency injection, to avoid the embedded calls to the Account
Manager and other system services.)
* Addresses #2287439 incompletely
* The most likely reason for a reply/forward to get stuck in the Outbox
is that the referenced message has been deleted from the client, with
the deletion occuring BEFORE the message gets sent (currently, the two
are completely independent)
* This change causes deletes NOT to be sent to the server if the message
to be deleted is referenced by an outgoing message
Change-Id: Iad3777282385bea82276f363d6f95ba8b07cc01c
* Addresses #2226426
* Recognize the case in which there is no EmailProvider Account corresponding
to an AccountManager account (the case being addressed is that of the
EmailProvider database being deleted due to corruption
* In this case, delete the AccountManager account so that the two are in
sync
* Refactor and add unit test for account reconciliation
Change-Id: I356b8bfaa0846f85223cc15994b750df207a63ea
* Addresses #2287439 incompletely
* The most likely reason for a reply/forward to get stuck in the Outbox
is that the referenced message has been deleted from the client, with
the deletion occuring BEFORE the message gets sent (currently, the two
are completely independent)
* This change causes deletes NOT to be sent to the server if the message
to be deleted is referenced by an outgoing message
Change-Id: I146f63ab345c07e684790e1d7d1fc08870468bbf
* Addresses #2226426
* If the user deletes Email data, or if data corruption causes
EmailProvider.db to be deleted, we will be in an inconsistent
state with any existing Exchange accounts, since the AccountManager
will still know about them, contacts (and eventually calendar) items will
continue to exist, etc.
* Run an integrity check when the provider is created, deleting any
orphaned EmailProvider.db or EmailProviderBody.db
* Catch SQLiteException's in the Provider and do an integrity check
if any is caught
Change-Id: I47d523b90a6b8f71ba8e13fba4b04846b3da1b1d
Case #1:
* Fixes#2184702
* Messages can be in the base Messages table, but also in
Message_Deletes and Message_Updates; the latter two were not
being purged of deleted messages.
* This CL deletes from all three tables when a Mailbox is deleted
* Also run a check for orphaned deletes/updates when the email
provider's db is first opened
* Unit test updated to check for proper deletion
* Unit test for the provider check for orphans
Case #2:
* Fixes#2184708
* Messages in Outbox/Drafts can get modified or deleted, but the
rows added to the updates/delete tables never get removed because
the boxes don't sync
* Added code to SyncManager.ping (which gets notifications of these
changes) to delete these rows
Change-Id: Ib53e441136b0da1e88bc220150d631999058a8f0
* For each attachment we add, check the DB for an existing attachment
with similar metadata (name, mime type, content id, etc.)
* Skip adding them if already held
* Unit tests
Originally fixed in 5b0a12c199 / CL I036f39c6
Fixes bug http://b/2084704
* For each attachment we add, check the DB for an existing attachment
with similar metadata (name, mime type, content id, etc.)
* Skip adding them if already held
* Unit tests
Fixes bug http://b/2084704
Some IMAP servers return NIL if you BODY.PEEK[TEXT] a messsage with
no body, instead of the more canonical {0}CRLF. Instead of messing with the
parser to deal with that, it makes more sense not to try and fetch empty
bodies. So there are three changes:
* Don't fetch parts when size = 0
* Don't append "null" when there is null body text
* Slight change to attachment handling so size is reported >0
* Unit tests on some of the related lower-level protocol stuff
Bug http://b/issue?id=2160387
Change-Id: Ifb8fb0ed5ce7297908e1ae8d5a02dda5975c4a3c
* MessageCompose now adds message-id to new messages (it was previously
done on its behalf by MimeMessage).
* LegacyConversions.updateMessageFields() now handles missing message-id
without error.
* Unit tests for the LegacyConversions change
These two issues were combining with a failure of comcast's SMTP server
to insert message-id headers, to prevent delivery of a message between
any two comcast accounts using this client.
Bug # http://b/issue?id=2161478
* Add AttachmentProvider.deleteAllMailboxAttachmentFiles
* Call it when server deletes a mailbox
* Confirmed (no change) all message deletes call deleteAllAttachmentFiles
* Unit tests of course :)
Bug # 2069004
Change-Id: I99731e6489fdca4cc9cebdff5fcf9c09d12b7b3a
