MessageView for regular messages and MessageFileView for EML files.
I'll break down MessageViewFragment too.
Change-Id: Iae66f33d8fb5de58084ab4aef31588e9743c5a18
I always thought our Activities are way too fat, meaning we've put too many
things into activities without any structure.
The major problems with this are:
- They have too many fields, which are not final and not even orthogonal.
This makes them very hard to understand/maintain. Changing one tiny bit
can always cause unanticipated side-effects.
- Very hard, or almost impossible to test.
I really think we should break them into independent and self-contained
subcomponents which can be tested separately.
Introducing MessageListXLStateManager, which manages the current account,
mailbox and message, and show/hide/update fragments accordingly
for MessageListXL.
With this class, MessageListXL will be able to switch accounts/mailboxes/
messages by just calling the methods such as selectAccount(), without
worrying about when to show/hide what fragment and how to initialize them.
(In other words, MessageListXLStateManager encapsulates the two-pane screen
transition. It's not intended to be reused for the phone UI.)
I didn't make it a nested class in MessageListXL, because nested classes can't
have real private members (private member are accessible from outer classes and
even brother classes!!), and I wanted it to be really self-contained anyway.
Change-Id: I1c121e99e30f12cc118e1c35abc9b30f49939a4a
* When a sync fails due to a provisioning error (on initial sync
or after policies are refreshed on the server), sync mailboxes go
into a "hold" state until the security error is resolved. Meanwhile,
the account mailbox handles provisioning. If this is NOT successful,
we put a hold on the account and go through the UI steps of setting
up security on the device. When this is done, we release the hold on
the account, which releases the hold on the mailboxes.
* If provisioning IS successful, however, a refresh of the existing
settings would be an example, we do NOT release the adapters, and
this is the bug we're seeing.
* This CL simply causes any held mailboxes in a successfully provisioned
to be released from the hold
Bug: 2865623
Change-Id: I59e780e9bd4ea908182b786dfd0e5851f5bf5f3b
- Added parameter check to openXxx methods.
- Clear the list before (re-)load the data, to make ListFragment show the
"Loading..." animation.
- Moved a few lines around in MailboxListFragment.
Change-Id: I48d9759e118976bf9f8cce10069e2b9b5c253342
- Broke down bindActivityInfo into setCallback and openMailboxes()
- openMailboxes() can be called multiple times against the same instance.
(We won't have to re-create the left pane on XL screen)
- Added EmptyCallback to avoid null checks
- Renamed a callback method
Change-Id: I3848a6f6da7f1782dcc9566967f8618ed79a878e
* Provide unused placeholder for account_settings_exchange_summary
* Bulk cleanup all other placeholders (no longer required)
Change-Id: I55d502eb725d721c9a893c17cf76f227489bb89f
There are two major, interrelated parts to this CL:
1) Clean up the activities to reduce the use of Intents to pass
information between activities; instead, we use a common
SetupData structure that automatically saved/restored as necessary
during the setup flow. A fair amount of code and inconsistent
use of Bundle extras has been eliminated in the process.
* Create SetupData structure, setters/getters, and initialization
methods to simplify the preservation of state during setup flow
* Remove all state/flow extras from Intents; Intents now only
specify the Activity to be started, which should greatly simplify
the transition to Fragments.
* Remove all state/flow fields from Activities
* Modify existing setup activity unit tests and confirm tests pass
2) Create AccountManager accounts for POP/IMAP email accounts to
provide consistency in user experience. Also, internal flows are
now identical as between account types.
* Move account reconciliation from SyncManager to MailService, so
that reconciliation is consistent between email and exchange
accounts; move unit tests as appropriate
* Add a "Sync Email" setting for POP/IMAP/EAS
* Change MailService to respect the "Sync Email" setting in
Settings -> Accounts & sync
* Create PopImapSyncAdapterService to handle manual POP/IMAP sync as
requested by SyncManager; add EmailSyncAdapterService to perform
the same function for EAS
* Use new PopImapAuthenticatorService to add AccountManager accounts
for POP/IMAP accounts; setup appropriate stanzas in AndroidManifest
and add related xml files
* Update AccountSettings to use SetupData
Miscellaneous other changes:
* Only allow valid port numbers in incoming/outgoing setup
Bug: 1712475
Change-Id: Ibdac52fb2c5578b86bf3992ddb1acd10f162391a
How to launch:
- Kick "Email 2 Pane" in the app drawer.
Major known issues:
- When you launches "Email 2 Pane", it starts directly; the logic in Welcom
won't be executed.
- There's no UI to add accounts. Use the old UI.
- There's no way to select non-default accounts.
- The on-screen buttons except for older/newer don't work.
- No contex menus work.
Change-Id: I38374acafafbae62e46f84294a7677e54686cfc2
This version is hybrid of the old design and what Andy's suggested.
- MessageViewFragment is responsible to show a single message at a time.
- Call MVF.openMessage() to tell it to open another message.
No need to re-create a new MVF to do this.
- MessageView manages the message list, and handles "move-to-newer/older"
buttons.
Reason for not re-creating a fragment when opening another message is:
- Re-using the same fragment doesn't make it as complecated/ugly as I
was initially afraid.
It's basically cancelling all running tasks, re-initializee some views,
and load a message.
- We don't have to run MVF.onCreate() over and over again when moving through
messages.
We may change the strategy later, but I think it's suffice for now.
(Changing this might affect how the back key works, so let's revisit it
when the fragment manager supports back.)
Basically this CL is all about internal changes.
No UI should have changed except for:
- Moved "Move to newer/older" buttons to the bottom.
Also fixes:
Bug: 2849129
Change-Id: I00c05069231afded9d98d3d52dd9a7925ebdee9d
ListFragment shows the "Loading..." animation for us until setListAdapter is
first called. In order to make use of it, setListAdapter should be called
only when the underlying data is ready.
Change-Id: Iac903b1f10ad7ed4be04446ddb2d2172e84bfe16
Merge commit 'c257cfe6d38a59b9abd6dbe01558927062c088a9' into gingerbread-plus-aosp
* commit 'c257cfe6d38a59b9abd6dbe01558927062c088a9':
add meta-files about 3rd party projects
* Backport from master branch
* Send policy key of "0" when validating; this gets us the policies
even if "Allow..." is enabled (currently, we simply don't see the
policies)
* If we don't support all of the policies, send back the response
code indicating support for partial support. If we get a positive
response back, then we're good to go - the server allows devices
with partial support. Otherwise, we fail as we always have - with
the toast indicating that the device doesn't support required
policies
* Remove PolicySet.isSupported() and ensure proper field ranges
within the constructor
* Update tests as appropriate
Bug: 2759782
Change-Id: Ida5663a9b35c75ecc61a5f442be0bd60b433cb73
* Add this to processSourceMessage in the reply/forward cases
* Add unit tests for reply and forward case
Bug: 2734321
Change-Id: I6be8383fe5f217a4bda8e669cb69f439bc8e96b6
* During refactor of referenced change, a critical line of code
got lost; it's replaced in this CL
Change-Id: Ib6f405cdfa120f5cb5c879ab0f7df52d54970cb7
* Handle status 5 for Ping command (heartbeat of out range)
* Write unit test for heartbeat reset
Bug: 2834195
Change-Id: Ic7952a4b296cf15c6ba895d6579fe7956b171e5b
Introducing MessageOrderManager which maintains a message list for
MessageView. It's used to tell if there is newer/older messages
in a mailbox, and the id of them.
Also, slightly related to this, moved mWaitForLoadMessageId to
ControllerResults where it should belong.
Change-Id: I84e32180c7e84a317f2204bb10ad7245ec022dca
- These tests will probably not make sense with the upcoming UI change.
- Moved testAttachmentWritePermissions to UtilityUnitTests.
It's a test for createUniqueFile, which is now owned by Utility.
- Removed Long.MIN_VALUE hack from MessageView.
New tests should have something better.
Change-Id: I9a09e5e8080a165b010607d1fa3112bcaaab4f90
* Created MockProvider that can be used for testing the results of
ContentProviderOperation's for Calendar/Contacts (we can't use these
within our mock contexts because we can't instantiate the provider
classes within the Email package)
* Wrote some unit tests for MockProvider
* Use MockProvider to test addEvent, in particular how a user's attendee
status is stored, depending on whether the event is new or updated
Change-Id: I97f02d125eb7347726261e12ce70aadc539be1d4
* We need to include the intro text (--Original Message--, etc.) to
SmartForwards, and somehow this got in a past updat
* Add unit test for forwarding
* Fix unit test for reply so that it works localized
Bug: 2477988
Bug: 2685784
Change-Id: I8d92f00d37a434840ec3eb237f3901cd5dc7ad09
