This adds a trivial workaround for a one-shot boot time crash, plus
an explicit check and abort for a failure condition that currently
presents as a less obvious failure.
Bug: 7145521, 7147557
Change-Id: I548f6a9caa9f0bd5710aaecea0e1c6c7c8f2f281
FramebufferSurface no longer speaks directly to the FB HAL. Now
everything goes through HWComposer (which may or may not be
connected to a hardware composer).
Added display index arg to some query methods.
Change-Id: Id3e157d2d4e3555d33afbb703e518b6e92e2d6d5
This change adds a compile-option to use eglWaitSyncANDROID to ensure that
texturing operations that access the current buffer of a SurfaceTexture do not
occur until the buffer is completely written. It also moves this
synchronization into a new SurfaceTexture method called doGLFenceWait and
changes SurfaceFlinger's Layer class to use that method rather than performing
its own wait on the fence.
Change-Id: I70afa88086ca7ff49a80e3cd03d423767db7cb88
onInitializeDisplays() was posting a transaction with changes
to the display projection. Unfortunately, it only set the
display orientation field and left viewport and frame
uninitialized.
The uninitialized values flowed downstream and found themselves
baked into a bogus DisplayDevice mGlobalTransform. That transform
was then applied to some Rects which were turned into Regions
that were them combined with other Regions.
Under certain situations, the uninitialized data might have
a largish value, resulting in the creation of Regions with
components in excess of the Region max-value limit of 0x7ffffff
(note that this is not INT_MAX). Later when performing a
binary operation using the Region, the Spanner would loop
indefinitely trying to figure out how to stuff a humongous
region inside of a max-value region. Not content to try
just once, the Spanner would continue trying again and
again, pegging the CPU and hanging surface flinger during boot.
Insanity soon followed.
Bug: 7130713
Change-Id: I0016f0c9662185be833474c212a1dd408096ae23
This change moves some common fence handling code into the base class for
BufferQueue consumer classes. It also makes the ConsumerBase class initialize
a buffer slot's fence with the acquire fence every time a buffer is acquired.
Change-Id: I0bd88bc269e919653b659bfb3ebfb04dd61692a0
the problem was that LayerBase::setPerFrameData() was always setting
this flag. in fact there was no reason to do this at that point since
the layer is initialized to a default state in setGeometry().
Bug: 7111259
Change-Id: Ib37b0dd7391a6163070e9aca025512159c1705f9
If SurfaceFlinger needs to refresh the screen but the dirty region is
empty, it won't set the layer acquire fences, and stale file
descriptors will be passed to HWC commit(). Now we make sure to clear
the stale file descriptors for each layer right after commit().
Bug: 7078301
Change-Id: I6953ff91fc5488f105b30b07306f9c45a4c3f780
- the library is dlopened from libsurfaceflinger
- the library built only when libnativehelper exists
Bug: 7089510
Change-Id: Ib3ea1029d7e8f6e055f4b759d0bf68f5123fa8a1
we used to have a visibleRegion object per layer, but now
it's per screen; so at somepoint the code got changed to
calculate the per-screen visible region on the stack and that's
what got passed to HWC.
we're now setting the visibleRegionScreen at each frame and
freeing at after the HWC set() call. We use the underlaying
SharedBuffer so that in most cases we don't have to allocate,
free or copy memory around.
Bug: 7089478
Change-Id: I24fa556c76613a225d9fe7a6c6b727bb476144d8
This change makes BufferQueue derive the min undequeued buffer count from a max
acquired buffer count that is set by the consumer. This value may be set at
any time that a producer is not connected to the BufferQueue rather than at
BufferQueue construction time.
Change-Id: Icf9f1d91ec612a079968ba0a4621deffe48f4e22
this would happen when the composition was handled
entirely in h/w composer, in this case, we would
not set the fences for any involved layers.
Bug: 7049373
Change-Id: I1439dc156ce23c24041cdfbbebfe8ff4fdf790f8
This change is a clean up of some of the handling of the maximum number of
buffers that are allowed at once. It mostly renames a few member variables and
methods, but it includes a couple small refactorings.
Change-Id: I9959310f563d09583548d4291e1050a7bbc7d87d
this happened because we didn't check that the visible
region was within the bounds of the display.
Bug: 7064121
Change-Id: I2e81850a3dc3d1474253520ad7f9e559c26d5a96
DisplayDevices are now keyed of the wp<IBinder> the client uses.
DisplayID has now become DisplayType which is just used to identify
physical displays (as opposed to virtual displays such as wifi displays).
Change-Id: I0c5968f2c902dcd699a7e0afacf833ff070c12ea
Use only display tokens in the API to refer to new displays.
Don't require the caller to specify the display when creating
a surface (since in general a surface could be shown on
any display).
This is intended to be a minimum change just to update the API.
Note that SurfaceFlinger still uses DisplayID in a few places
internally that might cause some features not to work properly
when there are multiple displays (LayerScreenshot, for example).
Change-Id: I3d91eec2da406eefd97bcd53655d403ad865a7e6
The primary display device was being configured to "blank" by
default, which prevented the boot animation from appearing
(unless you got lucky with the hardware composer state).
Bug 6975688
Change-Id: I0fa52e9e719c6e997c5725a7baf15d9718461b78
The primary display device was being configured to "blank" by
default, which prevented the boot animation from appearing
(unless you got lucky with the hardware composer state).
Bug 6975688
(This reverts an earlier revert.)
HWComposer can now create IDs representing a display
it can deal with. IDs MAIN and HDMI are reserved.
SurfaceFlinger associate HWComposer IDs with a
DisplayDevice and uses that when it talks to HWComposer.
A DisplayDevice doesn't have to have a HWComposer ID,
in that case it just can't use h/w composer composition.
Change-Id: Iec3d7ac92e0c22bf975052ae2847402f58bade71
- we now clean-up "dead" connection in the main loop,
this entirely avoid the problem with the side effects of
releasing strong references. We now only hold on to strong
reference for the connection we will signal.
- also simplify how we build the list of "ready" connections, by
only adding them to the list when we did receive a vsync event
Change-Id: I2a84da431320a2af8e8a93e07622a1d258236f43
