HAVE_ANDROID_OS was defined as "1" for targets, but never defined as "0"
for non-targets. Changing them to #ifdef should be safe and matches
all the other uses of HAVE_ANDROID_OS throughout the system.
Change-Id: I82257325a8ae5e4e4371ddfc4dbf51cea8ea0abb
If writeString8 is called with the following sequence:
writeString8(String8(""));
writeString8(String8("TempString"));
Then in the readString8, the 2nd String i.e. "TempString" is not read,
instead an empty string is read.
The bug comes because of the write call for String8("") where there are
no String bytes present. In the write Statement, an extra ‘\0’ is
written. During the Marshalling, Following bytes are written:
1 2 3 4 5 ...
0x0 0x0 0xB ‘T’ ‘e’ ...
The readString8 function has a check that, if String length is 0, don’t
read anything. So the first byte is read as the length for the first
string. The second byte i.e. ‘\0’ is read as the length for the second
string and hence the second string becomes empty too.
Change-Id: Id7acc0c80ae16e77be4331f1ddf69ea87e758420
grief from people who think this message is bad news.
but in reality, this message is really just an informational message
to aid in debugging
Change-Id: I1a2ab1666a27adb7d3fd210528b2c5218640d53d
- New feature to "am monitor" to have it automatically launch
gdbserv for you when a crash/ANR happens, and tell you how to
run the client.
- Update dumpstate to match new location of binder debug logs
- Various commented out logs that are being used to track down
issues.
Change-Id: Ia5dd0cd2df983a1fc6be697642a4590aa02a26a5
This was causing stack stitching problems where a one-way call with
violations followed by a two-way call without violations was getting
the previous one-way call's violation stack stitched on to the second
caller's stack.
The solution is a little more indirect than I would've liked
(preserving the binder's onTransact flags until enforceInterface) but
was seemingly necessary to work without changing the AIDL compiler.
It should also be sufficiently cheap, since no new calls to
thread-local IPCThreadState lookups were required. The additional
work is just same-thread getter/setters on the existing
IPCThreadState.
Change-Id: I4b6db1d445c56e868e6d0d7be3ba6849f4ef23ae
Now, when Thread A has a strict mode policy in effect and does a
Binder call to Thread B (most likely in another process), the strict
mode policy is passed along, but with the GATHER penalty bit set which
overrides other policies and instead gathers all offending stack
traces to a threadlocal which are then written back in the Parcel's
reply header.
Change-Id: I7d4497032a0609b37b1a2a15855f5c929ba0584d
Add native Parcel methods analogous to the Java versions.
Currently, these don't do much, but upcoming StrictMode work changes
the RPC calling conventions in some cases, so it's important that
everybody uses these consistently, rather than having a lot of code
trying to parse RPC responses out of Parcels themselves.
As a summary, the current convention that Java Binder services use is
to prepend the reply Parcel with an int32 signaling the exception
status:
0: no exception
-1: Security exception
-2: Bad Parcelable
-3: ...
-4: ...
-5: ...
... followed by Parceled String if the exception code is non-zero.
With an upcoming change, it'll be the case that a response Parcel can,
non-exceptionally return rich data in the header, and also return data
to the caller. The important thing to note in this new case is that
the first int32 in the reply parcel *will not be zero*, so anybody
manually checking for it with reply.readInt32() will get false
negative failures.
Short summary: If you're calling into a Java service and manually
checking the exception status with reply.readInt32(), change it to
reply.readExceptionCode().
Change-Id: I23f9a0e53a8cfbbd9759242cfde16723641afe04
Merge commit 'efcf68aa1fd7fcfd52cf3d2837ed8db8e797194b'
* commit 'efcf68aa1fd7fcfd52cf3d2837ed8db8e797194b':
Start of work on passing around StrictMode policy over Binder calls.
This is (intendend to be) a no-op change.
At this stage, Binder RPCs just have an additional uint32 passed around
in the header, right before the interface name. But nothing is actually
done with them yet. That value should right now always be 0.
This now boots and seems to work.
Change-Id: I135b7c84f07575e6b9717fef2424d301a450df7b
To allow use of the native CursorWindow class outside of the core framework jni
Change-Id: I72e8dcb91a2c691130c33cdfd9a25d343da1c592
Signed-off-by: Mike Lockwood <lockwood@android.com>
Fix some small static-initialization-order issues (and a static-
initializers-missing issue) that result from doing so. The static
libraries don't actually get used for anything real at the moment --
they're used for perf tests of bug 2660235.
Bug: 2660235
Change-Id: Iee2f38f79cc93b395e8d0a5a144ed92461f5ada0
get rid off the MAP_ONCE flag is MemoryHeapBase (as well as it's functionality),
this feature should not be used anymore.
the software renderer was incorrectly using the default ctor which set MAP_ONCE,
causing the leak. the software renderer itself is incorrectly used while coming
back from sleep.
Change-Id: I123621f8d140550b864f352bbcd8a5729db12b57
On binder incalls, the handler thread is given the caller's priority by the
driver, but not the caller's cgroup. We have explicit code that sets the
handler's cgroup to match the caller's, *except* that the system process
explicitly disables this behavior. This led to a siuation in which we were
running binder incalls to the system process at nice=10 but cgroup=fg.
That's fine as far as it goes, except that if a GC happened in the handler
thread, it would be promoted to foreground priority and cgroup both, to avoid
having the GC take forever. Then, when GC finished, the original priority
is reset, and the cgroup set *based on that priority*. This would push the
handler thread into nice=10 cgroup=bg_non_interactive -- which matches the
caller, but is supposed to be impossible in the system process.
The end result of this was that we could be running "lengthy" operations in
the system process in the background. Unfortunately, some of the operations
that wound up like this would hold important global system locks for up to
twenty seconds as a result, making the entire device unresponsive to input
for that period.
This CL fixes the binder incall setup to ensure that within the system process,
a binder incall is always begun from the normal foreground priority as well
as cgroup. In practice now the device still becomes laggy/sluggish when the
offending lock-holding time-consuming incall occurs, but since it still runs
as a foreground task it is able to proceed to completion within a short time
rather than taking 20 seconds.
Fixes bug #2403717
Change-Id: Id046aeabd0e80c48eef94accc37842835eab308d
Add a Flattenable interface to libutils which can be used to flatten
an object into bytestream + filedescriptor stream.
Parcel is modified to handle Flattenable. And GraphicBuffer implements
Flattenable.
Except for the overlay classes libui is now independent of libbinder.
At some point the implementation became complicated because of
SurfaceFlinger's special needs, since we are now relying on gralloc
we can go back to much simpler MemoryDealer.
Removed HeapInterface and AllocatorInterface, since those don't need
to be paramterized anymore. Merged SimpleMemory and Allocation.
Made SimplisticAllocator non virtual.
Removed MemoryDealer flags (READ_ONLY, PAGE_ALIGNED)
Removed a lot of unneeded code.
This is a very simply implementation: upon receiving an IPC, if the handling
thread is at a background priority (the driver will have taken care of
propagating this from the calling thread), then stick it in to the background
scheduling group. Plus an API to turn this off for the process, which is
used by the system process.
This also pulls some of the code for managing scheduling classes out of
the Process JNI wrappers and in to some convenience methods in thread.h.
in the kernel requires a guard page, so 1M allocations fragment memory very
badly. Subtracting a couple of pages so that they fit in a power of
two allows the kernel to make more efficient use of its virtual address space.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
To prevent buggy command implementations from poisoning binder threads'
scheduling class & priority for future command execution, we now reset the
cgroup and thread priority to foreground/normal when a binder service thread
finishes executing the designated command.
Change-Id: Ibc0ab2485751453f6dc96fdb4eb877fd02796e3f
- make sure that all binder Bn classes define a ctor and dtor in their respective library.
This avoids duplication of the ctor/dtor in libraries where these objects are instantiated.
This is also cleaner, should we want these ctor/dtor to do something one day.
- same change as above for some Bp classes and various other non-binder classes
- moved the definition of CHECK_INTERFACE() in IInterface.h instead of having it everywhere.
- improved the CHECK_INTERFACE() macro so it calls a single method in Parcel, instead of inlining its code everywhere
- IBinder::getInterfaceDescriptor() now returns a "const String16&" instead of String16, which saves calls to String16 and ~String16
- implemented a cache for BpBinder::getInterfaceDescriptor(), since this does an IPC. HOWEVER, this method never seems to be called.
The cache makes BpBinder bigger, so we need to figure out if we need this method at all.
Merge commit 'd50a458bb291801ab9fdc119301bc7b84b42a6e3'
* commit 'd50a458bb291801ab9fdc119301bc7b84b42a6e3':
Fix a major bug in Bundle when unparcelling from AIDL.
