Add definition of Tertiary display into the enumeration list of
surface composer header file, to support third display for all
Surface Flinger APIs.
Change-Id: Ic932be4f7f1ac9c44a5a8f36d17eb9386135de87
Add DisplayUtils class which uses the custom implementations
of ExLayer, ExSurfaceFlinger, ExHWComposer,
and ExVirtualDisplaySurface classes if needed
Change-Id: Ibdd8da5d3d0d602f42b76a15d0994c6aa98bee3f
This includes the following two changes squashed into one and
retaining the change I182f41edbaf9226fc62d6d17ee964998cd9f21f7
sf: Fixes for resolution change in SurfaceFlinger
1. Use active config from HWC when querying display attributes
When we query the display attributes we should use the active
config as reported by HWC in cases where HWC version is 1.4.
In all other cases we should revert to the default config,
config 0, as the active config.
2. Set/update the display config if HWC config change was successful
The new config should only be applied if HWC succeeded in changing
the active config. This would otherwise cause failure or undefined
behavior if the client sets an invalid/unsupported display config.
3. Set the active config at display creation time
When a new display device is added update the active config by
querying HWC.
Change-Id: I182f41edbaf9226fc62d6d17ee964998cd9f21f7
sf: Initialize active config for non-virtual displays at boot time
When a non-virtual display device is added at boot time, update the
active config by querying HWC otherwise the default config (config 0)
will be used.
Change-Id: I90f42fa1d20ed6176c4be464a10ae69a2f6a6d55
Change-Id: I182f41edbaf9226fc62d6d17ee964998cd9f21f7
In very low framerate situations, extrapolation is generally going to
either cause no benefit or make a mistake. We can safely turn it off
with no user-visible negative impact.
BUG=https://buganizer.corp.google.com/u/0/issues/24550942
TEST=Scrolled very slowly and saw mispredictions on Angler. With change,
saw the log message that the mispredictions were suppressed.
Change-Id: Ic9747d3ff098d7918047ada2ed1c2d21282c65b0
The uninitialized local variables pick up
whatever the memory content was there on stack.
This data gets sent to the remote process in
case of a failed transaction, which is a security
issue. Fixed.
(Partial manual merge of master change
12ba0f57d028a9c8f4eb3afddc326b70677d1e0c. Rest
to automerge from klp-dev)
For b/23696300
Change-Id: I704c9fab327b3545c58e8a9a96ac542eb7469c2a
The uninitialized local variables pick up
whatever the memory content was there on stack.
This data gets sent to the remote process in
case of a failed transaction, which is a security
issue. Fixed.
(Partial manual merge of master change
12ba0f57d028a9c8f4eb3afddc326b70677d1e0c. Rest
to automerge from klp-dev)
For b/23696300
Change-Id: I704c9fab327b3545c58e8a9a96ac542eb7469c2a
This reverts commit 9b70ab7a3cb260205e81e40ba181a86710d2eb95, reversing
changes made to 153008efb5a00ed3c18d588ce15f90d2442a9786.
Bug: 24302031
Change-Id: Ia746381b30be3b54cb646ed412b7271962c4b02a
Expect the boot status explicitly as a parameter so that we do not
have to rely on dev.bootcomplete, which isn't meaningfully set
when the device needs the decryption screen on boot.
Bug: 23898216
Change-Id: I9b34298caf70b1e5d40970cc0d04c469016a80a7
Expect the boot status explicitly as a parameter so that we do not
have to rely on dev.bootcomplete, which isn't meaningfully set
when the device needs the decryption screen on boot.
Bug: 23898216
Change-Id: I9b34298caf70b1e5d40970cc0d04c469016a80a7
Check dev.bootcomplete in dex2oat(). Use the information for
two changes.
Only switch to the background when we're post bootcomplete.
This will ensure better utilization after upgrades.
Add a second dex2oat-threads property that is used pre
bootcomplete. A separation of these phases allows using less
cores when the device is up, freeing up resources for other
purposes, e.g., avoid jank. The precedence during boot is the
boot property, or the image property if the former doesn't
exist, or the default property as a fallback.
Bug: 23898216
Bug: 24004256
Change-Id: I5063f3fc4b437cbe88c4e94584e01c1c78eccc4d
Check dev.bootcomplete in dex2oat(). Use the information for
two changes.
Only switch to the background when we're post bootcomplete.
This will ensure better utilization after upgrades.
Add a second dex2oat-threads property that is used pre
bootcomplete. A separation of these phases allows using less
cores when the device is up, freeing up resources for other
purposes, e.g., avoid jank. The precedence during boot is the
boot property, or the image property if the former doesn't
exist, or the default property as a fallback.
Bug: 23898216
Bug: 24004256
Change-Id: I5063f3fc4b437cbe88c4e94584e01c1c78eccc4d
Also, move NetworkDiagnostics between the two runs of getting the
wifi counters, so we can see the effect on the counters of
sending our probe packets.
Bug: 23661687
Change-Id: I3f81c003a35f50ac1cb8e77d0a8c73dae4fd91f3
If the custom sensor requires the BODY SENSOR permission, we should add
the body sensors app op for the custom sensor
Bug: 23396558
Change-Id: I132917d1bca12c76c8a9fb146e00951cba3e6d7a
If the custom sensor requires the BODY SENSOR permission, we should add
the body sensors app op for the custom sensor
Bug: 23396558
Change-Id: I132917d1bca12c76c8a9fb146e00951cba3e6d7a
Adds the colorTransform field, which defines a vendor-specific color
transform (e.g., wide gamut, sRGB, etc.) to the DisplayInfo class, and
populates it from the HWC interface.
Bug: 20853317
Change-Id: I153edc36a361407656f3eb5082b96c2da2ecbec7
This maps a monotonic timestamp to the
corresponding real-time timestamp, which
can be used to match up the traces with
other logs that use real-time.
Also write clock_sync records first instead of at
the end, to avoid not being to write it due to the
buffer being full.
Bug: 23668823
Change-Id: I644aeea496197e194ec30f808f754e3e043d905f
i) Use pingBinder() to check the status of sensorservice everytime an
event_queue is created. Retry to establish the binder connection if
SensorService has recovered from a runtime restart.
ii) LOG_ALWAYS_FATAL_IF getService(SensorService) returns NULL or malloc
returns NULL.
Bug: 22634472
Change-Id: I4e3912839b6f4114be1a124510878774dbd576a4
(cherry pick from commit e3c4df96083231b519dad919fd0ed6624100b368)
- For those that are proud to call themselves logspam police
- Every time someone declares that something is too chatty, or that
they lost their logs because they were declared too chatty and
their associated logs were aggresively pruned we generally
ask them to report the logger statistics to pinpoint what software
product that is the elephant in the room.
- Every time we want to spawn a new 'stop being so spammy' bug spawned
off a bugreport collected for another purpose, we *wish* we had the
logger statistics to help add gravitas to the claim that some piece
of software is the top, or near the top, polluter.
Bug: 22351810
Change-Id: Ifae33cd21d0ae2917a3b4381502d723725b1701c